! Started logfile: J1144+0054_X_2017_01_16_pus_uvs.log on Sun Apr 7 14:48:10 2019 obs J1144+0054_X_2017_01_16_pus_uva.fits ! Reading UV FITS file: J1144+0054_X_2017_01_16_pus_uva.fits ! AN table 1: 114 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.775049 visibilities/baseline/integration-bin. ! Found source: J1144+0054 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.44388e+09 3.2e+07 1 3.2e+07 ! 02 2 8.47588e+09 3.2e+07 1 3.2e+07 ! 03 3 8.50788e+09 3.2e+07 1 3.2e+07 ! 04 4 8.53988e+09 3.2e+07 1 3.2e+07 ! 05 5 8.60388e+09 3.2e+07 1 3.2e+07 ! 06 6 8.63588e+09 3.2e+07 1 3.2e+07 ! 07 7 8.69988e+09 3.2e+07 1 3.2e+07 ! 08 8 8.73188e+09 3.2e+07 1 3.2e+07 ! 09 9 8.79588e+09 3.2e+07 1 3.2e+07 ! 10 10 8.82788e+09 3.2e+07 1 3.2e+07 ! 11 11 8.85988e+09 3.2e+07 1 3.2e+07 ! 12 12 8.89188e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1309 lines of history. ! ! Reading 47712 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J1144+0054_X_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 132 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 132 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 132 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 132 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 132 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 132 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 132 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 132 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 132 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 132 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 132 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 145 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.920284Jy sigma=0.007341 ! Fit after self-cal, rms=0.911424Jy sigma=0.007287 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8977 mas, bmaj=2.502 mas, bpa=19.8 degrees ! Estimated noise=671.046 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0713979 Jy ! Component: 100 - total flux cleaned = 0.0888248 Jy ! Total flux subtracted in 100 components = 0.0888248 Jy ! Clean residual min=-0.003281 max=0.007184 Jy/beam ! Clean residual mean=-0.000002 rms=0.000981 Jy/beam ! Combined flux in latest and established models = 0.0888248 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.0888248 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.100642Jy sigma=0.000659 ! Fit after self-cal, rms=0.100612Jy sigma=0.000659 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00791606 Jy ! Component: 100 - total flux cleaned = 0.0120075 Jy ! Total flux subtracted in 100 components = 0.0120075 Jy ! Clean residual min=-0.002353 max=0.003868 Jy/beam ! Clean residual mean=0.000007 rms=0.000679 Jy/beam ! Combined flux in latest and established models = 0.100832 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 16 components and 0.100832 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.100027Jy sigma=0.000652 ! Fit after self-cal, rms=0.100014Jy sigma=0.000651 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.08 mas, bmaj=2.658 mas, bpa=17.85 degrees ! Estimated noise=421.156 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00314034 Jy ! Component: 100 - total flux cleaned = 0.00510858 Jy ! Component: 150 - total flux cleaned = 0.00644638 Jy ! Component: 200 - total flux cleaned = 0.00684585 Jy ! Total flux subtracted in 200 components = 0.00684585 Jy ! Clean residual min=-0.002468 max=0.004168 Jy/beam ! Clean residual mean=0.000009 rms=0.000613 Jy/beam ! Combined flux in latest and established models = 0.107678 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 38 components and 0.107678 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.099934Jy sigma=0.000650 ! Fit after self-cal, rms=0.099954Jy sigma=0.000650 ! Inverting map ! Added new window around map position (-3.8, 2.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00287903 Jy ! Component: 100 - total flux cleaned = 0.00344136 Jy ! Component: 150 - total flux cleaned = 0.00385975 Jy ! Component: 200 - total flux cleaned = 0.00421449 Jy ! Total flux subtracted in 200 components = 0.00421449 Jy ! Clean residual min=-0.002352 max=0.001927 Jy/beam ! Clean residual mean=0.000012 rms=0.000512 Jy/beam ! Combined flux in latest and established models = 0.111893 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 56 components and 0.111893 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.099829Jy sigma=0.000649 ! Fit after self-cal, rms=0.099821Jy sigma=0.000649 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.02 HN 0.96 KP 0.98 ! LA 1.01 MK 1.00* NL 0.91 OV 1.01 ! PT 1.04 SC 1.04 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.02 HN 1.00 KP 0.98 ! LA 1.00 MK 1.00* NL 0.94 OV 0.96 ! PT 1.03 SC 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.02 HN 0.98 KP 0.96 ! LA 0.99 MK 1.00* NL 0.94 OV 0.99 ! PT 1.09 SC 0.95 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.04 HN 0.99 KP 1.00 ! LA 0.95 MK 1.00* NL 0.93 OV 0.98 ! PT 1.09 SC 0.97 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.02 HN 0.97 KP 0.97 ! LA 0.99 MK 1.00* NL 0.94 OV 0.97 ! PT 1.06 SC 1.01 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.01 HN 1.00 KP 1.01 ! LA 1.02 MK 1.00* NL 0.95 OV 0.97 ! PT 1.13 SC 1.02 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.03 HN 1.05 KP 0.96 ! LA 0.93 MK 1.00* NL 0.95 OV 0.98 ! PT 1.11 SC 1.04 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.02 HN 1.04 KP 0.99 ! LA 0.98 MK 1.00* NL 0.96 OV 0.97 ! PT 1.07 SC 1.02 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.05 HN 1.03 KP 1.02 ! LA 0.97 MK 1.00* NL 0.97 OV 0.96 ! PT 1.09 SC 0.94 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.04 HN 1.05 KP 0.97 ! LA 1.01 MK 1.00* NL 0.92 OV 0.99 ! PT 1.10 SC 0.98 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.02 HN 1.05 KP 1.02 ! LA 0.97 MK 1.00* NL 0.96 OV 0.99 ! PT 1.15 SC 1.03 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.05 HN 1.02 KP 0.97 ! LA 0.95 MK 1.00* NL 0.94 OV 1.02 ! PT 1.16 SC 1.04 ! ! ! Fit before self-cal, rms=0.099821Jy sigma=0.000649 ! Fit after self-cal, rms=0.104198Jy sigma=0.000647 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.081 mas, bmaj=2.656 mas, bpa=17.8 degrees ! Estimated noise=418.795 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00141481 Jy ! Component: 100 - total flux cleaned = 0.00228738 Jy ! Component: 150 - total flux cleaned = 0.00279244 Jy ! Component: 200 - total flux cleaned = 0.00310764 Jy ! Total flux subtracted in 200 components = 0.00310764 Jy ! Clean residual min=-0.001270 max=0.001513 Jy/beam ! Clean residual mean=0.000011 rms=0.000356 Jy/beam ! Combined flux in latest and established models = 0.115 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 83 components and 0.115 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.104170Jy sigma=0.000647 ! Fit after self-cal, rms=0.104295Jy sigma=0.000647 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.104295Jy sigma=0.000647 ! Fit after self-cal, rms=0.105347Jy sigma=0.000646 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.08 mas, bmaj=2.655 mas, bpa=17.82 degrees ! Estimated noise=419.865 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000867881 Jy ! Component: 100 - total flux cleaned = 0.0014956 Jy ! Component: 150 - total flux cleaned = 0.00186354 Jy ! Component: 200 - total flux cleaned = 0.0020173 Jy ! Total flux subtracted in 200 components = 0.0020173 Jy ! Clean residual min=-0.001069 max=0.001208 Jy/beam ! Clean residual mean=0.000004 rms=0.000310 Jy/beam ! Combined flux in latest and established models = 0.117018 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 101 components and 0.117018 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.105336Jy sigma=0.000646 ! Fit after self-cal, rms=0.105359Jy sigma=0.000646 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000337253 Jy ! Component: 100 - total flux cleaned = 0.000438974 Jy ! Component: 150 - total flux cleaned = 0.000503874 Jy ! Component: 200 - total flux cleaned = 0.000574863 Jy ! Total flux subtracted in 200 components = 0.000574863 Jy ! Clean residual min=-0.001045 max=0.001200 Jy/beam ! Clean residual mean=0.000005 rms=0.000307 Jy/beam ! Combined flux in latest and established models = 0.117592 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 111 components and 0.117592 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.105355Jy sigma=0.000646 ! Fit after self-cal, rms=0.105356Jy sigma=0.000646 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.105356Jy sigma=0.000646 ! Fit after self-cal, rms=0.105858Jy sigma=0.000646 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.08 mas, bmaj=2.651 mas, bpa=17.76 degrees ! Estimated noise=420.291 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000529251 Jy ! Component: 100 - total flux cleaned = 0.000831504 Jy ! Component: 150 - total flux cleaned = 0.000986149 Jy ! Component: 200 - total flux cleaned = 0.00107701 Jy ! Total flux subtracted in 200 components = 0.00107701 Jy ! Clean residual min=-0.001019 max=0.001211 Jy/beam ! Clean residual mean=0.000005 rms=0.000296 Jy/beam ! Combined flux in latest and established models = 0.118669 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 118 components and 0.118669 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.105854Jy sigma=0.000646 ! Fit after self-cal, rms=0.105861Jy sigma=0.000646 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000155074 Jy ! Component: 100 - total flux cleaned = 0.000213332 Jy ! Component: 150 - total flux cleaned = 0.000274969 Jy ! Component: 200 - total flux cleaned = 0.000322938 Jy ! Total flux subtracted in 200 components = 0.000322938 Jy ! Clean residual min=-0.001010 max=0.001208 Jy/beam ! Clean residual mean=0.000005 rms=0.000295 Jy/beam ! Combined flux in latest and established models = 0.118992 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 129 components and 0.118992 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.105859Jy sigma=0.000646 ! Fit after self-cal, rms=0.105858Jy sigma=0.000646 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.105858Jy sigma=0.000646 ! Fit after self-cal, rms=0.106161Jy sigma=0.000646 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.168 mas, bmaj=3.347 mas, bpa=4.799 degrees ! Estimated noise=513.613 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000498327 Jy ! Component: 100 - total flux cleaned = 0.000658233 Jy ! Component: 150 - total flux cleaned = 0.000681074 Jy ! Component: 200 - total flux cleaned = 0.000709784 Jy ! Total flux subtracted in 200 components = 0.000709784 Jy ! Clean residual min=-0.001230 max=0.001492 Jy/beam ! Clean residual mean=0.000009 rms=0.000394 Jy/beam ! Combined flux in latest and established models = 0.119702 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 140 components and 0.119702 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.106159Jy sigma=0.000646 ! Fit after self-cal, rms=0.106162Jy sigma=0.000646 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000124927 Jy ! Component: 100 - total flux cleaned = 0.000160731 Jy ! Component: 150 - total flux cleaned = 0.000191932 Jy ! Component: 200 - total flux cleaned = 0.000219317 Jy ! Total flux subtracted in 200 components = 0.000219317 Jy ! Clean residual min=-0.001234 max=0.001487 Jy/beam ! Clean residual mean=0.000009 rms=0.000393 Jy/beam ! Combined flux in latest and established models = 0.119921 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 149 components and 0.119921 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.106162Jy sigma=0.000646 ! Fit after self-cal, rms=0.106162Jy sigma=0.000646 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=1.08 mas, bmaj=2.647 mas, bpa=17.7 degrees ! Estimated noise=420.622 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.08 x 2.647 at 17.7 degrees (North through East) ! Clean map min=-0.0010976 max=0.093929 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8998 mas, bmaj=2.495 mas, bpa=19.74 degrees ! Estimated noise=671.337 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0709893 Jy ! Component: 100 - total flux cleaned = 0.0887682 Jy ! Component: 150 - total flux cleaned = 0.0968639 Jy ! Component: 200 - total flux cleaned = 0.101793 Jy ! Total flux subtracted in 200 components = 0.101793 Jy ! Clean residual min=-0.001953 max=0.002721 Jy/beam ! Clean residual mean=-0.000004 rms=0.000589 Jy/beam ! Combined flux in latest and established models = 0.101793 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.101793 Jy ! Inverting map and beam ! Estimated beam: bmin=1.08 mas, bmaj=2.647 mas, bpa=17.7 degrees ! Estimated noise=420.622 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00425588 Jy ! Component: 100 - total flux cleaned = 0.00721675 Jy ! Component: 150 - total flux cleaned = 0.00946068 Jy ! Component: 200 - total flux cleaned = 0.0112483 Jy ! Total flux subtracted in 200 components = 0.0112483 Jy ! Clean residual min=-0.001317 max=0.001521 Jy/beam ! Clean residual mean=-0.000000 rms=0.000369 Jy/beam ! Combined flux in latest and established models = 0.113041 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 50 components and 0.113041 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.168 mas, bmaj=3.347 mas, bpa=4.799 degrees ! Estimated noise=513.613 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00226506 Jy ! Component: 100 - total flux cleaned = 0.0034011 Jy ! Component: 150 - total flux cleaned = 0.00427867 Jy ! Component: 200 - total flux cleaned = 0.00496722 Jy ! Total flux subtracted in 200 components = 0.00496722 Jy ! Clean residual min=-0.001287 max=0.001624 Jy/beam ! Clean residual mean=0.000006 rms=0.000412 Jy/beam ! Combined flux in latest and established models = 0.118008 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000543465 Jy ! Component: 100 - total flux cleaned = 0.000852395 Jy ! Component: 150 - total flux cleaned = 0.00108167 Jy ! Component: 200 - total flux cleaned = 0.00126857 Jy ! Total flux subtracted in 200 components = 0.00126857 Jy ! Clean residual min=-0.001245 max=0.001492 Jy/beam ! Clean residual mean=0.000008 rms=0.000393 Jy/beam ! Combined flux in latest and established models = 0.119277 Jy ! Adding 64 model components to the UV plane model. ! The established model now contains 104 components and 0.119277 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.08 mas, bmaj=2.647 mas, bpa=17.7 degrees ! Estimated noise=420.622 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000324457 Jy ! Component: 100 - total flux cleaned = 0.000531401 Jy ! Component: 150 - total flux cleaned = 0.000584139 Jy ! Component: 200 - total flux cleaned = 0.000663876 Jy ! Total flux subtracted in 200 components = 0.000663876 Jy ! Clean residual min=-0.001060 max=0.001286 Jy/beam ! Clean residual mean=0.000005 rms=0.000297 Jy/beam ! Combined flux in latest and established models = 0.119941 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 121 components and 0.11994 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.106166Jy sigma=0.000646 ! Fit after self-cal, rms=0.106157Jy sigma=0.000646 wmodel J1144+0054_X_2017_01_16_pus_map.mod ! Writing 121 model components to file: J1144+0054_X_2017_01_16_pus_map.mod wobs J1144+0054_X_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J1144+0054_X_2017_01_16_pus_uvs.fits wwins J1144+0054_X_2017_01_16_pus_map.win ! wwins: Wrote 2 windows to J1144+0054_X_2017_01_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000360217 Jy ! Component: 100 - total flux cleaned = 0.000508765 Jy ! Component: 150 - total flux cleaned = 0.000774341 Jy ! Component: 200 - total flux cleaned = 0.000994398 Jy ! Component: 250 - total flux cleaned = 0.00115671 Jy ! Component: 300 - total flux cleaned = 0.00126656 Jy ! Component: 350 - total flux cleaned = 0.00135732 Jy ! Component: 400 - total flux cleaned = 0.00144547 Jy ! Component: 450 - total flux cleaned = 0.00150277 Jy ! Component: 500 - total flux cleaned = 0.00154464 Jy ! Component: 550 - total flux cleaned = 0.0015716 Jy ! Component: 600 - total flux cleaned = 0.00157134 Jy ! Component: 650 - total flux cleaned = 0.00155805 Jy ! Component: 700 - total flux cleaned = 0.00159676 Jy ! Component: 750 - total flux cleaned = 0.0016092 Jy ! Component: 800 - total flux cleaned = 0.00165854 Jy ! Component: 850 - total flux cleaned = 0.00165833 Jy ! Component: 900 - total flux cleaned = 0.00167021 Jy ! Component: 950 - total flux cleaned = 0.00167041 Jy ! Component: 1000 - total flux cleaned = 0.00171668 Jy ! Component: 1050 - total flux cleaned = 0.00175078 Jy ! Component: 1100 - total flux cleaned = 0.00176182 Jy ! Component: 1150 - total flux cleaned = 0.00178399 Jy ! Component: 1200 - total flux cleaned = 0.00184948 Jy ! Component: 1250 - total flux cleaned = 0.00183878 Jy ! Component: 1300 - total flux cleaned = 0.00188119 Jy ! Component: 1350 - total flux cleaned = 0.0019439 Jy ! Component: 1400 - total flux cleaned = 0.00194372 Jy ! Component: 1450 - total flux cleaned = 0.00199455 Jy ! Component: 1500 - total flux cleaned = 0.00202456 Jy ! Component: 1550 - total flux cleaned = 0.0020147 Jy ! Component: 1600 - total flux cleaned = 0.00206383 Jy ! Component: 1650 - total flux cleaned = 0.00210253 Jy ! Component: 1700 - total flux cleaned = 0.00215978 Jy ! Component: 1750 - total flux cleaned = 0.00217884 Jy ! Component: 1800 - total flux cleaned = 0.0022442 Jy ! Component: 1850 - total flux cleaned = 0.00227176 Jy ! Component: 1900 - total flux cleaned = 0.00229913 Jy ! Component: 1950 - total flux cleaned = 0.00233542 Jy ! Component: 2000 - total flux cleaned = 0.00236234 Jy ! Total flux subtracted in 2048 components = 0.00241564 Jy ! Clean residual min=-0.000509 max=0.000492 Jy/beam ! Clean residual mean=0.000004 rms=0.000178 Jy/beam ! Combined flux in latest and established models = 0.122356 Jy keep ! Adding 147 model components to the UV plane model. ! The established model now contains 268 components and 0.122356 Jy ![Exited script file: muppet] wmap "J1144+0054_X_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.08 x 2.647 at 17.7 degrees (North through East) ! Clean map min=-0.00092286 max=0.093927 Jy/beam ! Writing clean map to FITS file: J1144+0054_X_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0939268 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00017731 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.566324 0.566324 1.13265 2.2653 4.53059 9.06118 18.1224 36.2447 72.4894 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.093 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.08 x 2.647 at 17.7 degrees (North through East) ! Clean map min=-0.00092286 max=0.093927 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1144+0054_X_2017_01_16_pus_uvs.log closed on Sun Apr 7 14:48:13 2019