! Started logfile: J1143+1843_S_2017_09_26_pus_uvs.log on Sat May 11 13:01:19 2019 obs J1143+1843_S_2017_09_26_pus_uva.fits ! Reading UV FITS file: J1143+1843_S_2017_09_26_pus_uva.fits ! AN table 1: 176 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.873895 visibilities/baseline/integration-bin. ! Found source: J1143+1843 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 674 lines of history. ! ! Reading 22148 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1143+1843_S_2017_09_26_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 104 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 191 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 146 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1107 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.972018Jy sigma=0.008851 ! Fit after self-cal, rms=0.952617Jy sigma=0.008686 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.982 mas, bmaj=10.45 mas, bpa=-20.35 degrees ! Estimated noise=1110.83 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0391114 Jy ! Component: 100 - total flux cleaned = 0.0478176 Jy ! Total flux subtracted in 100 components = 0.0478176 Jy ! Clean residual min=-0.002846 max=0.002934 Jy/beam ! Clean residual mean=-0.000003 rms=0.000745 Jy/beam ! Combined flux in latest and established models = 0.0478176 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0478176 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075665Jy sigma=0.000643 ! Fit after self-cal, rms=0.075266Jy sigma=0.000640 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.769 mas, bmaj=10.82 mas, bpa=-20.55 degrees ! Estimated noise=615.718 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00280395 Jy ! Component: 100 - total flux cleaned = 0.00295269 Jy ! Component: 150 - total flux cleaned = 0.00275537 Jy ! Component: 200 - total flux cleaned = 0.00263596 Jy ! Total flux subtracted in 200 components = 0.00263596 Jy ! Clean residual min=-0.001827 max=0.001791 Jy/beam ! Clean residual mean=0.000000 rms=0.000453 Jy/beam ! Combined flux in latest and established models = 0.0504535 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 20 components and 0.0504535 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075139Jy sigma=0.000639 ! Fit after self-cal, rms=0.075121Jy sigma=0.000639 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.01 HN 0.96 KP 1.01 ! LA 1.05 MK 1.01 NL 0.97 OV 0.99 ! PT 1.07 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.99 HN 1.02 KP 0.94 ! LA 1.03 MK 0.99 NL 1.02 OV 1.05 ! PT 0.96 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.01 HN 1.11 KP 0.96 ! LA 1.00 MK 1.07 NL 1.04 OV 1.00 ! PT 0.99 ! ! ! Correcting IF 4. ! A total of 252 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.94 KP 1.00* ! LA 0.72 MK 0.87 NL 1.00* OV 0.98 ! PT 0.89 ! ! ! Fit before self-cal, rms=0.075121Jy sigma=0.000639 ! Fit after self-cal, rms=0.074331Jy sigma=0.000640 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.778 mas, bmaj=10.74 mas, bpa=-20.28 degrees ! Estimated noise=621.643 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.38771e-05 Jy ! Component: 100 - total flux cleaned = -6.04594e-05 Jy ! Component: 150 - total flux cleaned = -7.63063e-05 Jy ! Component: 200 - total flux cleaned = -6.30749e-05 Jy ! Total flux subtracted in 200 components = -6.30749e-05 Jy ! Clean residual min=-0.001652 max=0.001798 Jy/beam ! Clean residual mean=-0.000001 rms=0.000414 Jy/beam ! Combined flux in latest and established models = 0.0503904 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 40 components and 0.0503905 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074321Jy sigma=0.000640 ! Fit after self-cal, rms=0.074286Jy sigma=0.000640 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074286Jy sigma=0.000640 ! Fit after self-cal, rms=0.074483Jy sigma=0.000639 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.805 mas, bmaj=10.7 mas, bpa=-20 degrees ! Estimated noise=622.156 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000132586 Jy ! Component: 100 - total flux cleaned = -0.00014857 Jy ! Component: 150 - total flux cleaned = -0.000161461 Jy ! Component: 200 - total flux cleaned = -0.000161752 Jy ! Total flux subtracted in 200 components = -0.000161752 Jy ! Clean residual min=-0.001611 max=0.001592 Jy/beam ! Clean residual mean=-0.000000 rms=0.000385 Jy/beam ! Combined flux in latest and established models = 0.0502287 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 55 components and 0.0502287 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074476Jy sigma=0.000639 ! Fit after self-cal, rms=0.074498Jy sigma=0.000639 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.53002e-05 Jy ! Component: 100 - total flux cleaned = -1.49055e-05 Jy ! Component: 150 - total flux cleaned = -1.50136e-05 Jy ! Component: 200 - total flux cleaned = -1.47122e-05 Jy ! Total flux subtracted in 200 components = -1.47122e-05 Jy ! Clean residual min=-0.001664 max=0.001586 Jy/beam ! Clean residual mean=-0.000000 rms=0.000386 Jy/beam ! Combined flux in latest and established models = 0.050214 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 59 components and 0.050214 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074495Jy sigma=0.000639 ! Fit after self-cal, rms=0.074494Jy sigma=0.000639 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074494Jy sigma=0.000639 ! Fit after self-cal, rms=0.074848Jy sigma=0.000639 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.822 mas, bmaj=10.69 mas, bpa=-19.83 degrees ! Estimated noise=622.815 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00010941 Jy ! Component: 100 - total flux cleaned = -8.66897e-05 Jy ! Component: 150 - total flux cleaned = -8.70407e-05 Jy ! Component: 200 - total flux cleaned = -8.70544e-05 Jy ! Total flux subtracted in 200 components = -8.70544e-05 Jy ! Clean residual min=-0.001677 max=0.001536 Jy/beam ! Clean residual mean=0.000000 rms=0.000379 Jy/beam ! Combined flux in latest and established models = 0.0501269 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 65 components and 0.0501269 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074844Jy sigma=0.000639 ! Fit after self-cal, rms=0.074854Jy sigma=0.000639 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.7963e-06 Jy ! Component: 100 - total flux cleaned = 2.70394e-05 Jy ! Component: 150 - total flux cleaned = 2.70175e-05 Jy ! Component: 200 - total flux cleaned = 2.69011e-05 Jy ! Total flux subtracted in 200 components = 2.69011e-05 Jy ! Clean residual min=-0.001729 max=0.001548 Jy/beam ! Clean residual mean=0.000000 rms=0.000381 Jy/beam ! Combined flux in latest and established models = 0.0501538 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 67 components and 0.0501538 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074852Jy sigma=0.000639 ! Fit after self-cal, rms=0.074853Jy sigma=0.000639 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074853Jy sigma=0.000639 ! Fit after self-cal, rms=0.074994Jy sigma=0.000639 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.826 mas, bmaj=11.97 mas, bpa=-17.11 degrees ! Estimated noise=726.835 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.70848e-05 Jy ! Component: 100 - total flux cleaned = -7.71152e-05 Jy ! Component: 150 - total flux cleaned = -8.8047e-05 Jy ! Component: 200 - total flux cleaned = -8.83187e-05 Jy ! Total flux subtracted in 200 components = -8.83187e-05 Jy ! Clean residual min=-0.001792 max=0.001610 Jy/beam ! Clean residual mean=0.000001 rms=0.000481 Jy/beam ! Combined flux in latest and established models = 0.0500655 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 81 components and 0.0500655 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074993Jy sigma=0.000639 ! Fit after self-cal, rms=0.074999Jy sigma=0.000639 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.57064e-05 Jy ! Component: 100 - total flux cleaned = 2.5765e-05 Jy ! Component: 150 - total flux cleaned = 2.14379e-05 Jy ! Component: 200 - total flux cleaned = 1.76679e-05 Jy ! Total flux subtracted in 200 components = 1.76679e-05 Jy ! Clean residual min=-0.001799 max=0.001593 Jy/beam ! Clean residual mean=0.000001 rms=0.000480 Jy/beam ! Combined flux in latest and established models = 0.0500832 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 93 components and 0.0500832 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074999Jy sigma=0.000639 ! Fit after self-cal, rms=0.075001Jy sigma=0.000639 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.833 mas, bmaj=10.68 mas, bpa=-19.73 degrees ! Estimated noise=623.185 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.833 x 10.68 at -19.73 degrees (North through East) ! Clean map min=-0.0017032 max=0.050369 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.017 mas, bmaj=10.41 mas, bpa=-19.53 degrees ! Estimated noise=1119.22 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0395655 Jy ! Component: 100 - total flux cleaned = 0.0484172 Jy ! Component: 150 - total flux cleaned = 0.0496809 Jy ! Component: 200 - total flux cleaned = 0.0497127 Jy ! Total flux subtracted in 200 components = 0.0497127 Jy ! Clean residual min=-0.002538 max=0.002325 Jy/beam ! Clean residual mean=-0.000001 rms=0.000601 Jy/beam ! Combined flux in latest and established models = 0.0497128 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.0497128 Jy ! Inverting map and beam ! Estimated beam: bmin=3.833 mas, bmaj=10.68 mas, bpa=-19.73 degrees ! Estimated noise=623.185 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00044741 Jy ! Component: 100 - total flux cleaned = 0.000449964 Jy ! Component: 150 - total flux cleaned = 0.00040803 Jy ! Component: 200 - total flux cleaned = 0.00040748 Jy ! Total flux subtracted in 200 components = 0.00040748 Jy ! Clean residual min=-0.001661 max=0.001554 Jy/beam ! Clean residual mean=0.000000 rms=0.000390 Jy/beam ! Combined flux in latest and established models = 0.0501202 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 35 components and 0.0501202 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.826 mas, bmaj=11.97 mas, bpa=-17.11 degrees ! Estimated noise=726.835 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.69601e-05 Jy ! Component: 100 - total flux cleaned = -3.00239e-05 Jy ! Component: 150 - total flux cleaned = -5.10324e-05 Jy ! Component: 200 - total flux cleaned = -5.075e-05 Jy ! Total flux subtracted in 200 components = -5.075e-05 Jy ! Clean residual min=-0.001754 max=0.001606 Jy/beam ! Clean residual mean=0.000001 rms=0.000481 Jy/beam ! Combined flux in latest and established models = 0.0500695 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.28126e-07 Jy ! Component: 100 - total flux cleaned = -6.65099e-07 Jy ! Component: 150 - total flux cleaned = -8.18233e-06 Jy ! Component: 200 - total flux cleaned = -1.08274e-06 Jy ! Total flux subtracted in 200 components = -1.08274e-06 Jy ! Clean residual min=-0.001768 max=0.001595 Jy/beam ! Clean residual mean=0.000001 rms=0.000479 Jy/beam ! Combined flux in latest and established models = 0.0500684 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 51 components and 0.0500684 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.833 mas, bmaj=10.68 mas, bpa=-19.73 degrees ! Estimated noise=623.185 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000238173 Jy ! Component: 100 - total flux cleaned = 0.000210034 Jy ! Component: 150 - total flux cleaned = 0.000183825 Jy ! Component: 200 - total flux cleaned = 0.000158929 Jy ! Total flux subtracted in 200 components = 0.000158929 Jy ! Clean residual min=-0.001717 max=0.001534 Jy/beam ! Clean residual mean=0.000001 rms=0.000384 Jy/beam ! Combined flux in latest and established models = 0.0502273 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 59 components and 0.0502273 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075007Jy sigma=0.000639 ! Fit after self-cal, rms=0.075003Jy sigma=0.000639 wmodel J1143+1843_S_2017_09_26_pus_map.mod ! Writing 59 model components to file: J1143+1843_S_2017_09_26_pus_map.mod wobs J1143+1843_S_2017_09_26_pus_uvs.fits ! Writing UV FITS file: J1143+1843_S_2017_09_26_pus_uvs.fits wwins J1143+1843_S_2017_09_26_pus_map.win ! wwins: Wrote 1 windows to J1143+1843_S_2017_09_26_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000251706 Jy ! Component: 100 - total flux cleaned = -0.000126979 Jy ! Component: 150 - total flux cleaned = 1.33619e-05 Jy ! Component: 200 - total flux cleaned = 7.87715e-05 Jy ! Component: 250 - total flux cleaned = 0.000139809 Jy ! Component: 300 - total flux cleaned = 0.000101409 Jy ! Component: 350 - total flux cleaned = 4.51649e-05 Jy ! Component: 400 - total flux cleaned = -9.83418e-06 Jy ! Component: 450 - total flux cleaned = -4.52844e-05 Jy ! Component: 500 - total flux cleaned = -2.80167e-05 Jy ! Component: 550 - total flux cleaned = -2.84175e-05 Jy ! Component: 600 - total flux cleaned = -4.48489e-05 Jy ! Component: 650 - total flux cleaned = -4.47843e-05 Jy ! Component: 700 - total flux cleaned = -4.46337e-05 Jy ! Component: 750 - total flux cleaned = -4.47501e-05 Jy ! Component: 800 - total flux cleaned = -4.46521e-05 Jy ! Component: 850 - total flux cleaned = -5.90849e-05 Jy ! Component: 900 - total flux cleaned = -5.93549e-05 Jy ! Component: 950 - total flux cleaned = -5.95213e-05 Jy ! Component: 1000 - total flux cleaned = -4.63209e-05 Jy ! Component: 1050 - total flux cleaned = -5.96804e-05 Jy ! Component: 1100 - total flux cleaned = -4.69416e-05 Jy ! Component: 1150 - total flux cleaned = -4.70327e-05 Jy ! Component: 1200 - total flux cleaned = -8.42716e-05 Jy ! Component: 1250 - total flux cleaned = -0.000132689 Jy ! Component: 1300 - total flux cleaned = -0.000132805 Jy ! Component: 1350 - total flux cleaned = -0.000144879 Jy ! Component: 1400 - total flux cleaned = -0.00013367 Jy ! Component: 1450 - total flux cleaned = -0.000133813 Jy ! Component: 1500 - total flux cleaned = -0.000134037 Jy ! Component: 1550 - total flux cleaned = -0.000145061 Jy ! Component: 1600 - total flux cleaned = -9.05747e-05 Jy ! Component: 1650 - total flux cleaned = -0.000101387 Jy ! Component: 1700 - total flux cleaned = -8.01551e-05 Jy ! Component: 1750 - total flux cleaned = -5.89768e-05 Jy ! Component: 1800 - total flux cleaned = -2.81409e-05 Jy ! Component: 1850 - total flux cleaned = -3.79941e-05 Jy ! Component: 1900 - total flux cleaned = 2.19869e-05 Jy ! Component: 1950 - total flux cleaned = 1.21604e-05 Jy ! Component: 2000 - total flux cleaned = 2.19475e-05 Jy ! Component: 2050 - total flux cleaned = 4.13903e-05 Jy ! Component: 2100 - total flux cleaned = 6.04356e-05 Jy ! Component: 2150 - total flux cleaned = 8.85779e-05 Jy ! Component: 2200 - total flux cleaned = 9.78699e-05 Jy ! Component: 2250 - total flux cleaned = 9.77778e-05 Jy ! Component: 2300 - total flux cleaned = 0.000133765 Jy ! Component: 2350 - total flux cleaned = 0.000106964 Jy ! Component: 2400 - total flux cleaned = 0.000115948 Jy ! Component: 2450 - total flux cleaned = 0.000133508 Jy ! Component: 2500 - total flux cleaned = 0.00013338 Jy ! Component: 2550 - total flux cleaned = 0.000133406 Jy ! Component: 2600 - total flux cleaned = 0.00015015 Jy ! Component: 2650 - total flux cleaned = 0.000133597 Jy ! Component: 2700 - total flux cleaned = 0.00010893 Jy ! Component: 2750 - total flux cleaned = 9.26525e-05 Jy ! Component: 2800 - total flux cleaned = 9.25791e-05 Jy ! Component: 2850 - total flux cleaned = 5.25908e-05 Jy ! Component: 2900 - total flux cleaned = 1.29521e-05 Jy ! Component: 2950 - total flux cleaned = -1.8438e-05 Jy ! Component: 3000 - total flux cleaned = -4.175e-05 Jy ! Component: 3050 - total flux cleaned = -4.9531e-05 Jy ! Component: 3100 - total flux cleaned = -6.47978e-05 Jy ! Component: 3150 - total flux cleaned = -9.51082e-05 Jy ! Component: 3200 - total flux cleaned = -0.00011015 Jy ! Component: 3250 - total flux cleaned = -0.000117568 Jy ! Component: 3300 - total flux cleaned = -0.000125003 Jy ! Component: 3350 - total flux cleaned = -0.000132289 Jy ! Component: 3400 - total flux cleaned = -0.000154051 Jy ! Component: 3450 - total flux cleaned = -0.000161232 Jy ! Component: 3500 - total flux cleaned = -0.000161238 Jy ! Component: 3550 - total flux cleaned = -0.000189654 Jy ! Component: 3600 - total flux cleaned = -0.000196632 Jy ! Component: 3650 - total flux cleaned = -0.000217667 Jy ! Component: 3700 - total flux cleaned = -0.000231528 Jy ! Component: 3750 - total flux cleaned = -0.000231485 Jy ! Component: 3800 - total flux cleaned = -0.000245276 Jy ! Component: 3850 - total flux cleaned = -0.000245285 Jy ! Component: 3900 - total flux cleaned = -0.000238536 Jy ! Component: 3950 - total flux cleaned = -0.000278877 Jy ! Component: 4000 - total flux cleaned = -0.000285522 Jy ! Component: 4050 - total flux cleaned = -0.000298834 Jy ! Total flux subtracted in 4096 components = -0.000298818 Jy ! Clean residual min=-0.000364 max=0.000413 Jy/beam ! Clean residual mean=0.000002 rms=0.000122 Jy/beam ! Combined flux in latest and established models = 0.0499285 Jy keep ! Adding 290 model components to the UV plane model. ! The established model now contains 349 components and 0.0499285 Jy ![Exited script file: muppet] wmap "J1143+1843_S_2017_09_26_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.833 x 10.68 at -19.73 degrees (North through East) ! Clean map min=-0.0011501 max=0.050405 Jy/beam ! Writing clean map to FITS file: J1143+1843_S_2017_09_26_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0504052 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000119892 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.713571 0.713571 1.42714 2.85429 5.70857 11.4171 22.8343 45.6686 91.3371 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.05 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.833 x 10.68 at -19.73 degrees (North through East) ! Clean map min=-0.0011501 max=0.050405 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1143+1843_S_2017_09_26_pus_uvs.log closed on Sat May 11 13:01:24 2019