! Started logfile: J1141+0022_S_2017_10_21_pus_uvs.log on Sat May 11 20:57:48 2019 obs J1141+0022_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J1141+0022_S_2017_10_21_pus_uva.fits ! AN table 1: 295 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.99209 visibilities/baseline/integration-bin. ! Found source: J1141+0022 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 42144 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1141+0022_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 160 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 173 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1239 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.919564Jy sigma=0.008788 ! Fit after self-cal, rms=0.859764Jy sigma=0.008215 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.951 mas, bmaj=15.64 mas, bpa=-18.78 degrees ! Estimated noise=781.347 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.108732 Jy ! Component: 100 - total flux cleaned = 0.133333 Jy ! Total flux subtracted in 100 components = 0.133333 Jy ! Clean residual min=-0.005293 max=0.008660 Jy/beam ! Clean residual mean=0.000030 rms=0.001495 Jy/beam ! Combined flux in latest and established models = 0.133333 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.133333 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089283Jy sigma=0.000771 ! Fit after self-cal, rms=0.089266Jy sigma=0.000771 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.443 mas, bmaj=16.56 mas, bpa=-18.34 degrees ! Estimated noise=423.622 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0130352 Jy ! Component: 100 - total flux cleaned = 0.0206343 Jy ! Component: 150 - total flux cleaned = 0.0257682 Jy ! Component: 200 - total flux cleaned = 0.029379 Jy ! Total flux subtracted in 200 components = 0.029379 Jy ! Clean residual min=-0.003525 max=0.003754 Jy/beam ! Clean residual mean=0.000017 rms=0.001003 Jy/beam ! Combined flux in latest and established models = 0.162712 Jy ! Performing phase self-cal ! Adding 71 model components to the UV plane model. ! The established model now contains 84 components and 0.162712 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086953Jy sigma=0.000752 ! Fit after self-cal, rms=0.086938Jy sigma=0.000751 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.18 FD 0.89 HN 0.98 KP 1.10 ! LA 1.02 MK 1.00 NL 0.90 OV 0.97 ! PT 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.22 FD 0.95 HN 1.02 KP 1.05 ! LA 0.99 MK 0.99 NL 1.03 OV 0.96 ! PT 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.98 HN 1.01 KP 1.04 ! LA 0.77 MK 1.03 NL 1.20 OV 0.91 ! PT 0.96 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 0.95 KP 1.00* ! LA 0.88 MK 1.22 NL 1.00* OV 1.00* ! PT 0.95 ! ! ! Fit before self-cal, rms=0.086938Jy sigma=0.000751 ! Fit after self-cal, rms=0.085470Jy sigma=0.000737 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.476 mas, bmaj=17.05 mas, bpa=-18.27 degrees ! Estimated noise=423.304 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.56703e-05 Jy ! Component: 100 - total flux cleaned = -0.000422957 Jy ! Component: 150 - total flux cleaned = -0.000636588 Jy ! Component: 200 - total flux cleaned = -0.000708615 Jy ! Total flux subtracted in 200 components = -0.000708615 Jy ! Clean residual min=-0.001548 max=0.001336 Jy/beam ! Clean residual mean=-0.000002 rms=0.000406 Jy/beam ! Combined flux in latest and established models = 0.162003 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 103 components and 0.162003 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085430Jy sigma=0.000736 ! Fit after self-cal, rms=0.085422Jy sigma=0.000736 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085422Jy sigma=0.000736 ! Fit after self-cal, rms=0.086050Jy sigma=0.000735 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.475 mas, bmaj=17.14 mas, bpa=-18.26 degrees ! Estimated noise=423.37 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.23306e-05 Jy ! Component: 100 - total flux cleaned = -0.000322568 Jy ! Component: 150 - total flux cleaned = -0.000392249 Jy ! Component: 200 - total flux cleaned = -0.000451335 Jy ! Total flux subtracted in 200 components = -0.000451335 Jy ! Clean residual min=-0.001404 max=0.001248 Jy/beam ! Clean residual mean=0.000000 rms=0.000335 Jy/beam ! Combined flux in latest and established models = 0.161552 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 115 components and 0.161552 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086029Jy sigma=0.000735 ! Fit after self-cal, rms=0.086039Jy sigma=0.000735 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.20701e-06 Jy ! Component: 100 - total flux cleaned = -2.85485e-05 Jy ! Component: 150 - total flux cleaned = -7.05736e-05 Jy ! Component: 200 - total flux cleaned = -0.000108778 Jy ! Total flux subtracted in 200 components = -0.000108778 Jy ! Clean residual min=-0.001364 max=0.001234 Jy/beam ! Clean residual mean=-0.000000 rms=0.000328 Jy/beam ! Combined flux in latest and established models = 0.161443 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 126 components and 0.161443 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086031Jy sigma=0.000735 ! Fit after self-cal, rms=0.086029Jy sigma=0.000735 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086029Jy sigma=0.000735 ! Fit after self-cal, rms=0.086626Jy sigma=0.000735 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.473 mas, bmaj=17.21 mas, bpa=-18.24 degrees ! Estimated noise=424.124 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.44195e-05 Jy ! Component: 100 - total flux cleaned = -0.000178817 Jy ! Component: 150 - total flux cleaned = -0.000230738 Jy ! Component: 200 - total flux cleaned = -0.000292857 Jy ! Total flux subtracted in 200 components = -0.000292857 Jy ! Clean residual min=-0.001309 max=0.001155 Jy/beam ! Clean residual mean=-0.000000 rms=0.000314 Jy/beam ! Combined flux in latest and established models = 0.16115 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 136 components and 0.16115 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086612Jy sigma=0.000735 ! Fit after self-cal, rms=0.086616Jy sigma=0.000735 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.279e-05 Jy ! Component: 100 - total flux cleaned = -8.96323e-05 Jy ! Component: 150 - total flux cleaned = -0.000150113 Jy ! Component: 200 - total flux cleaned = -0.000204609 Jy ! Total flux subtracted in 200 components = -0.000204609 Jy ! Clean residual min=-0.001278 max=0.001152 Jy/beam ! Clean residual mean=-0.000000 rms=0.000310 Jy/beam ! Combined flux in latest and established models = 0.160946 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 142 components and 0.160946 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086611Jy sigma=0.000735 ! Fit after self-cal, rms=0.086609Jy sigma=0.000735 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086609Jy sigma=0.000735 ! Fit after self-cal, rms=0.087033Jy sigma=0.000735 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.64 mas, bmaj=17.09 mas, bpa=-15.94 degrees ! Estimated noise=508.039 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.1098e-05 Jy ! Component: 100 - total flux cleaned = -8.43464e-05 Jy ! Component: 150 - total flux cleaned = -0.000173972 Jy ! Component: 200 - total flux cleaned = -0.000262717 Jy ! Total flux subtracted in 200 components = -0.000262717 Jy ! Clean residual min=-0.001544 max=0.001321 Jy/beam ! Clean residual mean=-0.000000 rms=0.000390 Jy/beam ! Combined flux in latest and established models = 0.160683 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 156 components and 0.160683 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087027Jy sigma=0.000735 ! Fit after self-cal, rms=0.087030Jy sigma=0.000735 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.22853e-05 Jy ! Component: 100 - total flux cleaned = -0.000100967 Jy ! Component: 150 - total flux cleaned = -0.000151916 Jy ! Component: 200 - total flux cleaned = -0.000174841 Jy ! Total flux subtracted in 200 components = -0.000174841 Jy ! Clean residual min=-0.001537 max=0.001316 Jy/beam ! Clean residual mean=0.000000 rms=0.000386 Jy/beam ! Combined flux in latest and established models = 0.160508 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 165 components and 0.160508 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087028Jy sigma=0.000735 ! Fit after self-cal, rms=0.087026Jy sigma=0.000735 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.471 mas, bmaj=17.27 mas, bpa=-18.24 degrees ! Estimated noise=424.74 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.471 x 17.27 at -18.24 degrees (North through East) ! Clean map min=-0.0011699 max=0.14182 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.965 mas, bmaj=16.41 mas, bpa=-18.7 degrees ! Estimated noise=792.934 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.110223 Jy ! Component: 100 - total flux cleaned = 0.134271 Jy ! Component: 150 - total flux cleaned = 0.142244 Jy ! Component: 200 - total flux cleaned = 0.14729 Jy ! Total flux subtracted in 200 components = 0.14729 Jy ! Clean residual min=-0.002371 max=0.002836 Jy/beam ! Clean residual mean=0.000008 rms=0.000651 Jy/beam ! Combined flux in latest and established models = 0.14729 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 42 model components to the UV plane model. ! The established model now contains 42 components and 0.14729 Jy ! Inverting map and beam ! Estimated beam: bmin=3.471 mas, bmaj=17.27 mas, bpa=-18.24 degrees ! Estimated noise=424.74 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00500394 Jy ! Component: 100 - total flux cleaned = 0.0080008 Jy ! Component: 150 - total flux cleaned = 0.0099937 Jy ! Component: 200 - total flux cleaned = 0.0113566 Jy ! Total flux subtracted in 200 components = 0.0113566 Jy ! Clean residual min=-0.001262 max=0.001120 Jy/beam ! Clean residual mean=0.000002 rms=0.000331 Jy/beam ! Combined flux in latest and established models = 0.158647 Jy ! Adding 71 model components to the UV plane model. ! The established model now contains 103 components and 0.158647 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.64 mas, bmaj=17.09 mas, bpa=-15.94 degrees ! Estimated noise=508.039 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00132872 Jy ! Component: 100 - total flux cleaned = 0.00204559 Jy ! Component: 150 - total flux cleaned = 0.00228582 Jy ! Component: 200 - total flux cleaned = 0.0023158 Jy ! Total flux subtracted in 200 components = 0.0023158 Jy ! Clean residual min=-0.001525 max=0.001371 Jy/beam ! Clean residual mean=0.000000 rms=0.000397 Jy/beam ! Combined flux in latest and established models = 0.160963 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.37729e-05 Jy ! Component: 100 - total flux cleaned = -1.02085e-05 Jy ! Component: 150 - total flux cleaned = -2.13518e-05 Jy ! Component: 200 - total flux cleaned = -3.19602e-05 Jy ! Total flux subtracted in 200 components = -3.19602e-05 Jy ! Clean residual min=-0.001507 max=0.001352 Jy/beam ! Clean residual mean=0.000000 rms=0.000393 Jy/beam ! Combined flux in latest and established models = 0.160931 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 146 components and 0.160931 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.471 mas, bmaj=17.27 mas, bpa=-18.24 degrees ! Estimated noise=424.74 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00022301 Jy ! Component: 100 - total flux cleaned = 0.00023901 Jy ! Component: 150 - total flux cleaned = 0.000239274 Jy ! Component: 200 - total flux cleaned = 0.000265235 Jy ! Total flux subtracted in 200 components = 0.000265235 Jy ! Clean residual min=-0.001207 max=0.001095 Jy/beam ! Clean residual mean=-0.000000 rms=0.000306 Jy/beam ! Combined flux in latest and established models = 0.161196 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 161 components and 0.161196 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087030Jy sigma=0.000735 ! Fit after self-cal, rms=0.087016Jy sigma=0.000735 wmodel J1141+0022_S_2017_10_21_pus_map.mod ! Writing 161 model components to file: J1141+0022_S_2017_10_21_pus_map.mod wobs J1141+0022_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J1141+0022_S_2017_10_21_pus_uvs.fits wwins J1141+0022_S_2017_10_21_pus_map.win ! wwins: Wrote 1 windows to J1141+0022_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000415976 Jy ! Component: 100 - total flux cleaned = -0.000570862 Jy ! Component: 150 - total flux cleaned = -0.000606736 Jy ! Component: 200 - total flux cleaned = -0.000657632 Jy ! Component: 250 - total flux cleaned = -0.000690177 Jy ! Component: 300 - total flux cleaned = -0.000785315 Jy ! Component: 350 - total flux cleaned = -0.000815924 Jy ! Component: 400 - total flux cleaned = -0.000905671 Jy ! Component: 450 - total flux cleaned = -0.000963937 Jy ! Component: 500 - total flux cleaned = -0.00102115 Jy ! Component: 550 - total flux cleaned = -0.00107701 Jy ! Component: 600 - total flux cleaned = -0.00110436 Jy ! Component: 650 - total flux cleaned = -0.0011446 Jy ! Component: 700 - total flux cleaned = -0.00117088 Jy ! Component: 750 - total flux cleaned = -0.00118387 Jy ! Component: 800 - total flux cleaned = -0.00117109 Jy ! Component: 850 - total flux cleaned = -0.0012081 Jy ! Component: 900 - total flux cleaned = -0.00120765 Jy ! Component: 950 - total flux cleaned = -0.0011836 Jy ! Component: 1000 - total flux cleaned = -0.00119521 Jy ! Component: 1050 - total flux cleaned = -0.00118362 Jy ! Component: 1100 - total flux cleaned = -0.00118358 Jy ! Component: 1150 - total flux cleaned = -0.00113897 Jy ! Component: 1200 - total flux cleaned = -0.00109521 Jy ! Component: 1250 - total flux cleaned = -0.00104107 Jy ! Component: 1300 - total flux cleaned = -0.000987557 Jy ! Component: 1350 - total flux cleaned = -0.000955983 Jy ! Component: 1400 - total flux cleaned = -0.000914191 Jy ! Component: 1450 - total flux cleaned = -0.000883383 Jy ! Component: 1500 - total flux cleaned = -0.000832735 Jy ! Component: 1550 - total flux cleaned = -0.000832847 Jy ! Component: 1600 - total flux cleaned = -0.000803322 Jy ! Component: 1650 - total flux cleaned = -0.00076424 Jy ! Component: 1700 - total flux cleaned = -0.000744945 Jy ! Component: 1750 - total flux cleaned = -0.000697285 Jy ! Component: 1800 - total flux cleaned = -0.000659499 Jy ! Component: 1850 - total flux cleaned = -0.000612866 Jy ! Component: 1900 - total flux cleaned = -0.000585392 Jy ! Component: 1950 - total flux cleaned = -0.000567116 Jy ! Component: 2000 - total flux cleaned = -0.000539881 Jy ! Component: 2050 - total flux cleaned = -0.000477136 Jy ! Component: 2100 - total flux cleaned = -0.00045044 Jy ! Component: 2150 - total flux cleaned = -0.000406396 Jy ! Component: 2200 - total flux cleaned = -0.000380202 Jy ! Component: 2250 - total flux cleaned = -0.000354121 Jy ! Component: 2300 - total flux cleaned = -0.000302703 Jy ! Component: 2350 - total flux cleaned = -0.00029411 Jy ! Component: 2400 - total flux cleaned = -0.00026891 Jy ! Component: 2450 - total flux cleaned = -0.000227209 Jy ! Component: 2500 - total flux cleaned = -0.00018593 Jy ! Component: 2550 - total flux cleaned = -0.000177695 Jy ! Component: 2600 - total flux cleaned = -0.000145102 Jy ! Component: 2650 - total flux cleaned = -8.8518e-05 Jy ! Component: 2700 - total flux cleaned = -7.24704e-05 Jy ! Component: 2750 - total flux cleaned = -1.01701e-06 Jy ! Component: 2800 - total flux cleaned = 3.0458e-05 Jy ! Component: 2850 - total flux cleaned = 7.73405e-05 Jy ! Component: 2900 - total flux cleaned = 0.000123882 Jy ! Component: 2950 - total flux cleaned = 0.00014708 Jy ! Component: 3000 - total flux cleaned = 0.000215837 Jy ! Component: 3050 - total flux cleaned = 0.000238522 Jy ! Component: 3100 - total flux cleaned = 0.00029121 Jy ! Component: 3150 - total flux cleaned = 0.000336047 Jy ! Component: 3200 - total flux cleaned = 0.000358358 Jy ! Component: 3250 - total flux cleaned = 0.00040994 Jy ! Component: 3300 - total flux cleaned = 0.000431805 Jy ! Component: 3350 - total flux cleaned = 0.000460914 Jy ! Component: 3400 - total flux cleaned = 0.000460943 Jy ! Component: 3450 - total flux cleaned = 0.000504019 Jy ! Component: 3500 - total flux cleaned = 0.000482609 Jy ! Component: 3550 - total flux cleaned = 0.00051097 Jy ! Component: 3600 - total flux cleaned = 0.00051102 Jy ! Component: 3650 - total flux cleaned = 0.000497043 Jy ! Component: 3700 - total flux cleaned = 0.000511085 Jy ! Component: 3750 - total flux cleaned = 0.00051799 Jy ! Component: 3800 - total flux cleaned = 0.000538605 Jy ! Component: 3850 - total flux cleaned = 0.000531791 Jy ! Component: 3900 - total flux cleaned = 0.00053189 Jy ! Component: 3950 - total flux cleaned = 0.000558994 Jy ! Component: 4000 - total flux cleaned = 0.000579131 Jy ! Component: 4050 - total flux cleaned = 0.000565787 Jy ! Total flux subtracted in 4096 components = 0.00059897 Jy ! Clean residual min=-0.000407 max=0.000465 Jy/beam ! Clean residual mean=-0.000001 rms=0.000128 Jy/beam ! Combined flux in latest and established models = 0.161795 Jy keep ! Adding 289 model components to the UV plane model. ! The established model now contains 450 components and 0.161795 Jy ![Exited script file: muppet] wmap "J1141+0022_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.471 x 17.27 at -18.24 degrees (North through East) ! Clean map min=-0.00078148 max=0.14203 Jy/beam ! Writing clean map to FITS file: J1141+0022_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.14203 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000124044 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.262011 0.262011 0.524022 1.04804 2.09609 4.19217 8.38435 16.7687 33.5374 67.0748 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.142 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.471 x 17.27 at -18.24 degrees (North through East) ! Clean map min=-0.00078148 max=0.14203 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1141+0022_S_2017_10_21_pus_uvs.log closed on Sat May 11 20:57:54 2019