! Started logfile: J1141+0022_S_2017_09_26_pus_uvs.log on Sat May 11 13:01:14 2019 obs J1141+0022_S_2017_09_26_pus_uva.fits ! Reading UV FITS file: J1141+0022_S_2017_09_26_pus_uva.fits ! AN table 1: 175 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.875873 visibilities/baseline/integration-bin. ! Found source: J1141+0022 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 674 lines of history. ! ! Reading 22072 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1141+0022_S_2017_09_26_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 100 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 318 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 274 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 858 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.940760Jy sigma=0.007604 ! Fit after self-cal, rms=0.860636Jy sigma=0.006966 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.917 mas, bmaj=14.38 mas, bpa=-18.74 degrees ! Estimated noise=1197.9 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.108098 Jy ! Component: 100 - total flux cleaned = 0.132801 Jy ! Total flux subtracted in 100 components = 0.132801 Jy ! Clean residual min=-0.006609 max=0.009245 Jy/beam ! Clean residual mean=-0.000027 rms=0.001752 Jy/beam ! Combined flux in latest and established models = 0.132801 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.132801 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093888Jy sigma=0.000695 ! Fit after self-cal, rms=0.093874Jy sigma=0.000695 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.399 mas, bmaj=16.79 mas, bpa=-18.31 degrees ! Estimated noise=731.219 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0128831 Jy ! Component: 100 - total flux cleaned = 0.0196318 Jy ! Component: 150 - total flux cleaned = 0.0241065 Jy ! Component: 200 - total flux cleaned = 0.0272347 Jy ! Total flux subtracted in 200 components = 0.0272347 Jy ! Clean residual min=-0.003450 max=0.003665 Jy/beam ! Clean residual mean=-0.000013 rms=0.000917 Jy/beam ! Combined flux in latest and established models = 0.160035 Jy ! Performing phase self-cal ! Adding 66 model components to the UV plane model. ! The established model now contains 83 components and 0.160035 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091995Jy sigma=0.000680 ! Fit after self-cal, rms=0.092040Jy sigma=0.000680 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 0.87 HN 1.01 KP 1.03 ! LA 1.01 MK 1.00 NL 0.91 OV 1.03 ! PT 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 1.04 KP 1.01 ! LA 0.98 MK 1.00 NL 1.02 OV 1.03 ! PT 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.90 HN 1.05 KP 1.00 ! LA 1.00 MK 1.04 NL 0.96 OV 0.97 ! PT 0.96 ! ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.96 HN 0.98 KP 1.00* ! LA 1.05 MK 1.11 NL 1.00* OV 1.00 ! PT 0.98 ! ! ! Fit before self-cal, rms=0.092040Jy sigma=0.000680 ! Fit after self-cal, rms=0.092393Jy sigma=0.000675 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.429 mas, bmaj=17.19 mas, bpa=-18.32 degrees ! Estimated noise=732.814 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00132438 Jy ! Component: 100 - total flux cleaned = 0.00126073 Jy ! Component: 150 - total flux cleaned = 0.00118116 Jy ! Component: 200 - total flux cleaned = 0.00115811 Jy ! Total flux subtracted in 200 components = 0.00115811 Jy ! Clean residual min=-0.002291 max=0.002312 Jy/beam ! Clean residual mean=-0.000005 rms=0.000596 Jy/beam ! Combined flux in latest and established models = 0.161193 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 101 components and 0.161193 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092355Jy sigma=0.000675 ! Fit after self-cal, rms=0.092431Jy sigma=0.000675 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092431Jy sigma=0.000675 ! Fit after self-cal, rms=0.093389Jy sigma=0.000674 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.416 mas, bmaj=17.28 mas, bpa=-18.26 degrees ! Estimated noise=735.096 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000734832 Jy ! Component: 100 - total flux cleaned = 0.000763006 Jy ! Component: 150 - total flux cleaned = 0.000789757 Jy ! Component: 200 - total flux cleaned = 0.00081149 Jy ! Total flux subtracted in 200 components = 0.00081149 Jy ! Clean residual min=-0.002008 max=0.001851 Jy/beam ! Clean residual mean=-0.000007 rms=0.000509 Jy/beam ! Combined flux in latest and established models = 0.162005 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 114 components and 0.162005 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093355Jy sigma=0.000674 ! Fit after self-cal, rms=0.093367Jy sigma=0.000674 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.20185e-05 Jy ! Component: 100 - total flux cleaned = 2.78008e-05 Jy ! Component: 150 - total flux cleaned = -2.87862e-06 Jy ! Component: 200 - total flux cleaned = -3.02805e-05 Jy ! Total flux subtracted in 200 components = -3.02805e-05 Jy ! Clean residual min=-0.002064 max=0.001847 Jy/beam ! Clean residual mean=-0.000007 rms=0.000504 Jy/beam ! Combined flux in latest and established models = 0.161975 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 128 components and 0.161975 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093358Jy sigma=0.000674 ! Fit after self-cal, rms=0.093358Jy sigma=0.000674 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093358Jy sigma=0.000674 ! Fit after self-cal, rms=0.093716Jy sigma=0.000674 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.408 mas, bmaj=17.34 mas, bpa=-18.24 degrees ! Estimated noise=737.854 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000923375 Jy ! Component: 100 - total flux cleaned = 0.000970975 Jy ! Component: 150 - total flux cleaned = 0.000989844 Jy ! Component: 200 - total flux cleaned = 0.000973662 Jy ! Total flux subtracted in 200 components = 0.000973662 Jy ! Clean residual min=-0.002013 max=0.001774 Jy/beam ! Clean residual mean=-0.000008 rms=0.000492 Jy/beam ! Combined flux in latest and established models = 0.162948 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 139 components and 0.162948 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093693Jy sigma=0.000674 ! Fit after self-cal, rms=0.093684Jy sigma=0.000674 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.25149e-05 Jy ! Component: 100 - total flux cleaned = -3.99276e-05 Jy ! Component: 150 - total flux cleaned = -6.56689e-05 Jy ! Component: 200 - total flux cleaned = -9.03476e-05 Jy ! Total flux subtracted in 200 components = -9.03476e-05 Jy ! Clean residual min=-0.002041 max=0.001773 Jy/beam ! Clean residual mean=-0.000008 rms=0.000489 Jy/beam ! Combined flux in latest and established models = 0.162858 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 146 components and 0.162858 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093679Jy sigma=0.000674 ! Fit after self-cal, rms=0.093679Jy sigma=0.000674 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093679Jy sigma=0.000674 ! Fit after self-cal, rms=0.094069Jy sigma=0.000674 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.933 mas, bmaj=17.53 mas, bpa=-14.29 degrees ! Estimated noise=894.42 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000806462 Jy ! Component: 100 - total flux cleaned = 0.000757502 Jy ! Component: 150 - total flux cleaned = 0.000695356 Jy ! Component: 200 - total flux cleaned = 0.000645406 Jy ! Total flux subtracted in 200 components = 0.000645406 Jy ! Clean residual min=-0.002449 max=0.002071 Jy/beam ! Clean residual mean=-0.000016 rms=0.000597 Jy/beam ! Combined flux in latest and established models = 0.163503 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 163 components and 0.163503 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094053Jy sigma=0.000674 ! Fit after self-cal, rms=0.094049Jy sigma=0.000674 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.6619e-05 Jy ! Component: 100 - total flux cleaned = -5.02206e-05 Jy ! Component: 150 - total flux cleaned = -5.07269e-05 Jy ! Component: 200 - total flux cleaned = -5.07718e-05 Jy ! Total flux subtracted in 200 components = -5.07718e-05 Jy ! Clean residual min=-0.002446 max=0.002082 Jy/beam ! Clean residual mean=-0.000016 rms=0.000593 Jy/beam ! Combined flux in latest and established models = 0.163453 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 175 components and 0.163453 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094047Jy sigma=0.000674 ! Fit after self-cal, rms=0.094047Jy sigma=0.000674 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.402 mas, bmaj=17.38 mas, bpa=-18.23 degrees ! Estimated noise=740.874 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.402 x 17.38 at -18.23 degrees (North through East) ! Clean map min=-0.0019956 max=0.14298 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.904 mas, bmaj=14.99 mas, bpa=-18.61 degrees ! Estimated noise=1234.4 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.111086 Jy ! Component: 100 - total flux cleaned = 0.135933 Jy ! Component: 150 - total flux cleaned = 0.145819 Jy ! Component: 200 - total flux cleaned = 0.151602 Jy ! Total flux subtracted in 200 components = 0.151602 Jy ! Clean residual min=-0.003536 max=0.003697 Jy/beam ! Clean residual mean=-0.000013 rms=0.000956 Jy/beam ! Combined flux in latest and established models = 0.151602 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.151602 Jy ! Inverting map and beam ! Estimated beam: bmin=3.402 mas, bmaj=17.38 mas, bpa=-18.23 degrees ! Estimated noise=740.874 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00473368 Jy ! Component: 100 - total flux cleaned = 0.00762682 Jy ! Component: 150 - total flux cleaned = 0.00949726 Jy ! Component: 200 - total flux cleaned = 0.0107574 Jy ! Total flux subtracted in 200 components = 0.0107574 Jy ! Clean residual min=-0.001998 max=0.001911 Jy/beam ! Clean residual mean=-0.000010 rms=0.000509 Jy/beam ! Combined flux in latest and established models = 0.162359 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 63 components and 0.162359 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.933 mas, bmaj=17.53 mas, bpa=-14.29 degrees ! Estimated noise=894.42 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00120788 Jy ! Component: 100 - total flux cleaned = 0.00176875 Jy ! Component: 150 - total flux cleaned = 0.00180525 Jy ! Component: 200 - total flux cleaned = 0.00182149 Jy ! Total flux subtracted in 200 components = 0.00182149 Jy ! Clean residual min=-0.002506 max=0.001998 Jy/beam ! Clean residual mean=-0.000015 rms=0.000597 Jy/beam ! Combined flux in latest and established models = 0.164181 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.9335e-05 Jy ! Component: 100 - total flux cleaned = 5.55356e-05 Jy ! Component: 150 - total flux cleaned = 6.80116e-05 Jy ! Component: 200 - total flux cleaned = 5.64052e-05 Jy ! Total flux subtracted in 200 components = 5.64052e-05 Jy ! Clean residual min=-0.002500 max=0.001975 Jy/beam ! Clean residual mean=-0.000014 rms=0.000593 Jy/beam ! Combined flux in latest and established models = 0.164237 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 94 components and 0.164237 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.402 mas, bmaj=17.38 mas, bpa=-18.23 degrees ! Estimated noise=740.874 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000158056 Jy ! Component: 100 - total flux cleaned = 0.000160161 Jy ! Component: 150 - total flux cleaned = 0.000181432 Jy ! Component: 200 - total flux cleaned = 0.000180769 Jy ! Total flux subtracted in 200 components = 0.000180769 Jy ! Clean residual min=-0.002002 max=0.001769 Jy/beam ! Clean residual mean=-0.000007 rms=0.000488 Jy/beam ! Combined flux in latest and established models = 0.164418 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 113 components and 0.164418 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094060Jy sigma=0.000674 ! Fit after self-cal, rms=0.094046Jy sigma=0.000674 wmodel J1141+0022_S_2017_09_26_pus_map.mod ! Writing 113 model components to file: J1141+0022_S_2017_09_26_pus_map.mod wobs J1141+0022_S_2017_09_26_pus_uvs.fits ! Writing UV FITS file: J1141+0022_S_2017_09_26_pus_uvs.fits wwins J1141+0022_S_2017_09_26_pus_map.win ! wwins: Wrote 1 windows to J1141+0022_S_2017_09_26_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00052758 Jy ! Component: 100 - total flux cleaned = -0.000648158 Jy ! Component: 150 - total flux cleaned = -0.000593806 Jy ! Component: 200 - total flux cleaned = -0.000410725 Jy ! Component: 250 - total flux cleaned = -0.000234554 Jy ! Component: 300 - total flux cleaned = -8.92966e-05 Jy ! Component: 350 - total flux cleaned = 5.14559e-05 Jy ! Component: 400 - total flux cleaned = 0.000165062 Jy ! Component: 450 - total flux cleaned = 0.000340287 Jy ! Component: 500 - total flux cleaned = 0.000425354 Jy ! Component: 550 - total flux cleaned = 0.000528711 Jy ! Component: 600 - total flux cleaned = 0.000569106 Jy ! Component: 650 - total flux cleaned = 0.000647274 Jy ! Component: 700 - total flux cleaned = 0.00062793 Jy ! Component: 750 - total flux cleaned = 0.000665124 Jy ! Component: 800 - total flux cleaned = 0.000592003 Jy ! Component: 850 - total flux cleaned = 0.000610257 Jy ! Component: 900 - total flux cleaned = 0.000627309 Jy ! Component: 950 - total flux cleaned = 0.00059291 Jy ! Component: 1000 - total flux cleaned = 0.000609692 Jy ! Component: 1050 - total flux cleaned = 0.000609467 Jy ! Component: 1100 - total flux cleaned = 0.00061003 Jy ! Component: 1150 - total flux cleaned = 0.000577941 Jy ! Component: 1200 - total flux cleaned = 0.000562379 Jy ! Component: 1250 - total flux cleaned = 0.000547296 Jy ! Component: 1300 - total flux cleaned = 0.000577352 Jy ! Component: 1350 - total flux cleaned = 0.000547575 Jy ! Component: 1400 - total flux cleaned = 0.000605877 Jy ! Component: 1450 - total flux cleaned = 0.000576864 Jy ! Component: 1500 - total flux cleaned = 0.000562595 Jy ! Component: 1550 - total flux cleaned = 0.000562663 Jy ! Component: 1600 - total flux cleaned = 0.000603597 Jy ! Component: 1650 - total flux cleaned = 0.00056296 Jy ! Component: 1700 - total flux cleaned = 0.000536618 Jy ! Component: 1750 - total flux cleaned = 0.000563072 Jy ! Component: 1800 - total flux cleaned = 0.000537575 Jy ! Component: 1850 - total flux cleaned = 0.000550454 Jy ! Component: 1900 - total flux cleaned = 0.00052545 Jy ! Component: 1950 - total flux cleaned = 0.000575097 Jy ! Component: 2000 - total flux cleaned = 0.000599519 Jy ! Component: 2050 - total flux cleaned = 0.000623645 Jy ! Component: 2100 - total flux cleaned = 0.000623606 Jy ! Component: 2150 - total flux cleaned = 0.000635656 Jy ! Component: 2200 - total flux cleaned = 0.00069381 Jy ! Component: 2250 - total flux cleaned = 0.000659475 Jy ! Component: 2300 - total flux cleaned = 0.000704894 Jy ! Component: 2350 - total flux cleaned = 0.000705071 Jy ! Component: 2400 - total flux cleaned = 0.000716045 Jy ! Component: 2450 - total flux cleaned = 0.000716159 Jy ! Component: 2500 - total flux cleaned = 0.000716302 Jy ! Component: 2550 - total flux cleaned = 0.000758932 Jy ! Component: 2600 - total flux cleaned = 0.000727174 Jy ! Component: 2650 - total flux cleaned = 0.000789722 Jy ! Component: 2700 - total flux cleaned = 0.000758658 Jy ! Component: 2750 - total flux cleaned = 0.000789315 Jy ! Component: 2800 - total flux cleaned = 0.000769134 Jy ! Component: 2850 - total flux cleaned = 0.000799272 Jy ! Component: 2900 - total flux cleaned = 0.000809264 Jy ! Component: 2950 - total flux cleaned = 0.000838827 Jy ! Component: 3000 - total flux cleaned = 0.000838817 Jy ! Component: 3050 - total flux cleaned = 0.000867753 Jy ! Component: 3100 - total flux cleaned = 0.000877277 Jy ! Component: 3150 - total flux cleaned = 0.000867928 Jy ! Component: 3200 - total flux cleaned = 0.000933734 Jy ! Component: 3250 - total flux cleaned = 0.000952357 Jy ! Component: 3300 - total flux cleaned = 0.000943072 Jy ! Component: 3350 - total flux cleaned = 0.000924744 Jy ! Component: 3400 - total flux cleaned = 0.000933756 Jy ! Component: 3450 - total flux cleaned = 0.000924771 Jy ! Component: 3500 - total flux cleaned = 0.000924812 Jy ! Component: 3550 - total flux cleaned = 0.000951264 Jy ! Component: 3600 - total flux cleaned = 0.000942423 Jy ! Component: 3650 - total flux cleaned = 0.000950983 Jy ! Component: 3700 - total flux cleaned = 0.000959562 Jy ! Component: 3750 - total flux cleaned = 0.000985176 Jy ! Component: 3800 - total flux cleaned = 0.000985199 Jy ! Component: 3850 - total flux cleaned = 0.00100203 Jy ! Component: 3900 - total flux cleaned = 0.00101876 Jy ! Component: 3950 - total flux cleaned = 0.00103524 Jy ! Component: 4000 - total flux cleaned = 0.00102702 Jy ! Component: 4050 - total flux cleaned = 0.00105151 Jy ! Total flux subtracted in 4096 components = 0.00105955 Jy ! Clean residual min=-0.000517 max=0.000430 Jy/beam ! Clean residual mean=-0.000001 rms=0.000160 Jy/beam ! Combined flux in latest and established models = 0.165477 Jy keep ! Adding 279 model components to the UV plane model. ! The established model now contains 392 components and 0.165477 Jy ![Exited script file: muppet] wmap "J1141+0022_S_2017_09_26_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.402 x 17.38 at -18.23 degrees (North through East) ! Clean map min=-0.0011423 max=0.14335 Jy/beam ! Writing clean map to FITS file: J1141+0022_S_2017_09_26_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.143354 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000157685 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.32999 0.32999 0.65998 1.31996 2.63992 5.27984 10.5597 21.1193 42.2387 84.4774 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.143 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.402 x 17.38 at -18.23 degrees (North through East) ! Clean map min=-0.0011423 max=0.14335 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1141+0022_S_2017_09_26_pus_uvs.log closed on Sat May 11 13:01:19 2019