! Started logfile: J1140-2800_S_2017_02_19_pus_uvs.log on Sat May 4 18:50:08 2019 obs J1140-2800_S_2017_02_19_pus_uva.fits ! Reading UV FITS file: J1140-2800_S_2017_02_19_pus_uva.fits ! AN table 1: 96 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.607407 visibilities/baseline/integration-bin. ! Found source: J1140-2800 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 482 lines of history. ! ! Reading 10496 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1140-2800_S_2017_02_19_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 202 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 202 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 202 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 529 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.928493Jy sigma=0.005978 ! Fit after self-cal, rms=0.898875Jy sigma=0.005809 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.256 mas, bmaj=12.49 mas, bpa=20.78 degrees ! Estimated noise=1566.03 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0835096 Jy ! Component: 100 - total flux cleaned = 0.102803 Jy ! Total flux subtracted in 100 components = 0.102803 Jy ! Clean residual min=-0.007132 max=0.011423 Jy/beam ! Clean residual mean=-0.000022 rms=0.002312 Jy/beam ! Combined flux in latest and established models = 0.102803 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.102803 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112659Jy sigma=0.000663 ! Fit after self-cal, rms=0.112617Jy sigma=0.000663 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.777 mas, bmaj=13.86 mas, bpa=19.34 degrees ! Estimated noise=1199.96 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0083352 Jy ! Component: 100 - total flux cleaned = 0.0124357 Jy ! Component: 150 - total flux cleaned = 0.0131496 Jy ! Component: 200 - total flux cleaned = 0.0135176 Jy ! Total flux subtracted in 200 components = 0.0135176 Jy ! Clean residual min=-0.005311 max=0.006569 Jy/beam ! Clean residual mean=-0.000015 rms=0.001463 Jy/beam ! Combined flux in latest and established models = 0.11632 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 22 components and 0.11632 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111824Jy sigma=0.000658 ! Fit after self-cal, rms=0.111874Jy sigma=0.000658 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.96 HN 1.24 KP 1.07 ! LA 1.04 MK 1.00* NL 0.91 OV 1.02 ! PT 1.00* SC 0.92 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.01 HN 1.26 KP 1.01 ! LA 0.98 MK 1.00* NL 1.10 OV 1.01 ! PT 1.00* SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.82 FD 1.01 HN 1.19 KP 0.86 ! LA 0.78 MK 1.00* NL 1.17 OV 0.96 ! PT 1.00* SC 0.96 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 1.00 HN 0.97 KP 1.00* ! LA 0.80 MK 1.00* NL 1.00* OV 0.99 ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.111874Jy sigma=0.000658 ! Fit after self-cal, rms=0.111673Jy sigma=0.000651 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.754 mas, bmaj=14.22 mas, bpa=20.01 degrees ! Estimated noise=1186.35 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0034279 Jy ! Component: 100 - total flux cleaned = -0.00398752 Jy ! Component: 150 - total flux cleaned = -0.00445918 Jy ! Component: 200 - total flux cleaned = -0.00495422 Jy ! Total flux subtracted in 200 components = -0.00495422 Jy ! Clean residual min=-0.003968 max=0.004261 Jy/beam ! Clean residual mean=-0.000004 rms=0.001052 Jy/beam ! Combined flux in latest and established models = 0.111366 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 34 components and 0.111366 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111369Jy sigma=0.000650 ! Fit after self-cal, rms=0.111426Jy sigma=0.000650 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111426Jy sigma=0.000650 ! Fit after self-cal, rms=0.119624Jy sigma=0.000646 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.747 mas, bmaj=14.12 mas, bpa=19.64 degrees ! Estimated noise=1183.18 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00174159 Jy ! Component: 100 - total flux cleaned = -0.00235194 Jy ! Component: 150 - total flux cleaned = -0.00252342 Jy ! Component: 200 - total flux cleaned = -0.00263924 Jy ! Total flux subtracted in 200 components = -0.00263924 Jy ! Clean residual min=-0.002475 max=0.002633 Jy/beam ! Clean residual mean=-0.000001 rms=0.000718 Jy/beam ! Combined flux in latest and established models = 0.108727 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 54 components and 0.108727 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119595Jy sigma=0.000646 ! Fit after self-cal, rms=0.119855Jy sigma=0.000646 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000373554 Jy ! Component: 100 - total flux cleaned = -0.000423956 Jy ! Component: 150 - total flux cleaned = -0.000489122 Jy ! Component: 200 - total flux cleaned = -0.000546071 Jy ! Total flux subtracted in 200 components = -0.000546071 Jy ! Clean residual min=-0.002625 max=0.002679 Jy/beam ! Clean residual mean=-0.000001 rms=0.000711 Jy/beam ! Combined flux in latest and established models = 0.108181 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 64 components and 0.108181 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119844Jy sigma=0.000646 ! Fit after self-cal, rms=0.119847Jy sigma=0.000646 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119847Jy sigma=0.000646 ! Fit after self-cal, rms=0.124375Jy sigma=0.000646 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.75 mas, bmaj=14.14 mas, bpa=19.58 degrees ! Estimated noise=1183.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00111243 Jy ! Component: 100 - total flux cleaned = -0.00128992 Jy ! Component: 150 - total flux cleaned = -0.00136484 Jy ! Component: 200 - total flux cleaned = -0.00140823 Jy ! Total flux subtracted in 200 components = -0.00140823 Jy ! Clean residual min=-0.002419 max=0.002501 Jy/beam ! Clean residual mean=-0.000002 rms=0.000678 Jy/beam ! Combined flux in latest and established models = 0.106773 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 75 components and 0.106773 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124360Jy sigma=0.000646 ! Fit after self-cal, rms=0.124430Jy sigma=0.000646 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000112992 Jy ! Component: 100 - total flux cleaned = -0.000152015 Jy ! Component: 150 - total flux cleaned = -0.000187165 Jy ! Component: 200 - total flux cleaned = -0.000218891 Jy ! Total flux subtracted in 200 components = -0.000218891 Jy ! Clean residual min=-0.002471 max=0.002438 Jy/beam ! Clean residual mean=-0.000001 rms=0.000669 Jy/beam ! Combined flux in latest and established models = 0.106554 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 78 components and 0.106554 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124424Jy sigma=0.000646 ! Fit after self-cal, rms=0.124424Jy sigma=0.000646 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124424Jy sigma=0.000646 ! Fit after self-cal, rms=0.125963Jy sigma=0.000646 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.564 mas, bmaj=20.96 mas, bpa=12.19 degrees ! Estimated noise=1351.71 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00135229 Jy ! Component: 100 - total flux cleaned = -0.00203143 Jy ! Component: 150 - total flux cleaned = -0.00213073 Jy ! Component: 200 - total flux cleaned = -0.00219397 Jy ! Total flux subtracted in 200 components = -0.00219397 Jy ! Clean residual min=-0.002229 max=0.002456 Jy/beam ! Clean residual mean=-0.000001 rms=0.000695 Jy/beam ! Combined flux in latest and established models = 0.10436 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 83 components and 0.10436 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125957Jy sigma=0.000646 ! Fit after self-cal, rms=0.125992Jy sigma=0.000646 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000161006 Jy ! Component: 100 - total flux cleaned = -0.000232327 Jy ! Component: 150 - total flux cleaned = -0.000282267 Jy ! Component: 200 - total flux cleaned = -0.000315823 Jy ! Total flux subtracted in 200 components = -0.000315823 Jy ! Clean residual min=-0.002224 max=0.002437 Jy/beam ! Clean residual mean=-0.000001 rms=0.000696 Jy/beam ! Combined flux in latest and established models = 0.104044 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 90 components and 0.104044 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125992Jy sigma=0.000646 ! Fit after self-cal, rms=0.126000Jy sigma=0.000646 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.752 mas, bmaj=14.16 mas, bpa=19.55 degrees ! Estimated noise=1183.67 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.752 x 14.16 at 19.55 degrees (North through East) ! Clean map min=-0.0024264 max=0.10486 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.214 mas, bmaj=12.66 mas, bpa=21 degrees ! Estimated noise=1568.59 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0834025 Jy ! Component: 100 - total flux cleaned = 0.101611 Jy ! Component: 150 - total flux cleaned = 0.106658 Jy ! Component: 200 - total flux cleaned = 0.107975 Jy ! Total flux subtracted in 200 components = 0.107975 Jy ! Clean residual min=-0.003580 max=0.003971 Jy/beam ! Clean residual mean=-0.000008 rms=0.001007 Jy/beam ! Combined flux in latest and established models = 0.107975 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.107975 Jy ! Inverting map and beam ! Estimated beam: bmin=3.752 mas, bmaj=14.16 mas, bpa=19.55 degrees ! Estimated noise=1183.67 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000370641 Jy ! Component: 100 - total flux cleaned = -0.000490951 Jy ! Component: 150 - total flux cleaned = -0.000592598 Jy ! Component: 200 - total flux cleaned = -0.000685401 Jy ! Total flux subtracted in 200 components = -0.000685401 Jy ! Clean residual min=-0.002477 max=0.002755 Jy/beam ! Clean residual mean=-0.000004 rms=0.000696 Jy/beam ! Combined flux in latest and established models = 0.10729 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 28 components and 0.10729 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.564 mas, bmaj=20.96 mas, bpa=12.19 degrees ! Estimated noise=1351.71 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00107017 Jy ! Component: 100 - total flux cleaned = -0.00128296 Jy ! Component: 150 - total flux cleaned = -0.00136024 Jy ! Component: 200 - total flux cleaned = -0.00145454 Jy ! Total flux subtracted in 200 components = -0.00145454 Jy ! Clean residual min=-0.002244 max=0.002848 Jy/beam ! Clean residual mean=-0.000005 rms=0.000713 Jy/beam ! Combined flux in latest and established models = 0.105835 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.56397e-05 Jy ! Component: 100 - total flux cleaned = -0.000128771 Jy ! Component: 150 - total flux cleaned = -0.000210084 Jy ! Component: 200 - total flux cleaned = -0.000268619 Jy ! Total flux subtracted in 200 components = -0.000268619 Jy ! Clean residual min=-0.002204 max=0.002789 Jy/beam ! Clean residual mean=-0.000005 rms=0.000706 Jy/beam ! Combined flux in latest and established models = 0.105567 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 44 components and 0.105567 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.752 mas, bmaj=14.16 mas, bpa=19.55 degrees ! Estimated noise=1183.67 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000238371 Jy ! Component: 100 - total flux cleaned = 0.000159918 Jy ! Component: 150 - total flux cleaned = 9.13455e-05 Jy ! Component: 200 - total flux cleaned = 9.16669e-05 Jy ! Total flux subtracted in 200 components = 9.16669e-05 Jy ! Clean residual min=-0.002480 max=0.002561 Jy/beam ! Clean residual mean=-0.000003 rms=0.000669 Jy/beam ! Combined flux in latest and established models = 0.105658 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 56 components and 0.105658 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126049Jy sigma=0.000646 ! Fit after self-cal, rms=0.126012Jy sigma=0.000646 wmodel J1140-2800_S_2017_02_19_pus_map.mod ! Writing 56 model components to file: J1140-2800_S_2017_02_19_pus_map.mod wobs J1140-2800_S_2017_02_19_pus_uvs.fits ! Writing UV FITS file: J1140-2800_S_2017_02_19_pus_uvs.fits wwins J1140-2800_S_2017_02_19_pus_map.win ! wwins: Wrote 1 windows to J1140-2800_S_2017_02_19_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000264182 Jy ! Component: 100 - total flux cleaned = 2.42667e-05 Jy ! Component: 150 - total flux cleaned = -0.000360137 Jy ! Component: 200 - total flux cleaned = -0.000726679 Jy ! Component: 250 - total flux cleaned = -0.00107658 Jy ! Component: 300 - total flux cleaned = -0.00134738 Jy ! Component: 350 - total flux cleaned = -0.00144543 Jy ! Component: 400 - total flux cleaned = -0.00150915 Jy ! Component: 450 - total flux cleaned = -0.00160074 Jy ! Component: 500 - total flux cleaned = -0.00163041 Jy ! Component: 550 - total flux cleaned = -0.00148458 Jy ! Component: 600 - total flux cleaned = -0.00148508 Jy ! Component: 650 - total flux cleaned = -0.00142938 Jy ! Component: 700 - total flux cleaned = -0.00134725 Jy ! Component: 750 - total flux cleaned = -0.00132044 Jy ! Component: 800 - total flux cleaned = -0.00124177 Jy ! Component: 850 - total flux cleaned = -0.00126665 Jy ! Component: 900 - total flux cleaned = -0.00124127 Jy ! Component: 950 - total flux cleaned = -0.001192 Jy ! Component: 1000 - total flux cleaned = -0.00121643 Jy ! Component: 1050 - total flux cleaned = -0.00116928 Jy ! Component: 1100 - total flux cleaned = -0.00114617 Jy ! Component: 1150 - total flux cleaned = -0.00114624 Jy ! Component: 1200 - total flux cleaned = -0.00110108 Jy ! Component: 1250 - total flux cleaned = -0.00110145 Jy ! Component: 1300 - total flux cleaned = -0.00116737 Jy ! Component: 1350 - total flux cleaned = -0.00127494 Jy ! Component: 1400 - total flux cleaned = -0.00129618 Jy ! Component: 1450 - total flux cleaned = -0.00133788 Jy ! Component: 1500 - total flux cleaned = -0.00135819 Jy ! Component: 1550 - total flux cleaned = -0.00135835 Jy ! Component: 1600 - total flux cleaned = -0.00143869 Jy ! Component: 1650 - total flux cleaned = -0.00149854 Jy ! Component: 1700 - total flux cleaned = -0.00153795 Jy ! Component: 1750 - total flux cleaned = -0.00163442 Jy ! Component: 1800 - total flux cleaned = -0.00169147 Jy ! Component: 1850 - total flux cleaned = -0.00178563 Jy ! Component: 1900 - total flux cleaned = -0.00180416 Jy ! Component: 1950 - total flux cleaned = -0.00189596 Jy ! Component: 2000 - total flux cleaned = -0.00196843 Jy ! Component: 2050 - total flux cleaned = -0.00196866 Jy ! Component: 2100 - total flux cleaned = -0.00207523 Jy ! Component: 2150 - total flux cleaned = -0.00207521 Jy ! Component: 2200 - total flux cleaned = -0.00207534 Jy ! Component: 2250 - total flux cleaned = -0.002127 Jy ! Component: 2300 - total flux cleaned = -0.00212687 Jy ! Component: 2350 - total flux cleaned = -0.00216071 Jy ! Component: 2400 - total flux cleaned = -0.00221089 Jy ! Component: 2450 - total flux cleaned = -0.00224411 Jy ! Component: 2500 - total flux cleaned = -0.00222751 Jy ! Component: 2550 - total flux cleaned = -0.00227651 Jy ! Component: 2600 - total flux cleaned = -0.00234116 Jy ! Component: 2650 - total flux cleaned = -0.00234094 Jy ! Component: 2700 - total flux cleaned = -0.00237281 Jy ! Component: 2750 - total flux cleaned = -0.00242003 Jy ! Component: 2800 - total flux cleaned = -0.00242008 Jy ! Component: 2850 - total flux cleaned = -0.00245108 Jy ! Component: 2900 - total flux cleaned = -0.00246664 Jy ! Component: 2950 - total flux cleaned = -0.00251236 Jy ! Component: 3000 - total flux cleaned = -0.00249705 Jy ! Component: 3050 - total flux cleaned = -0.00251199 Jy ! Component: 3100 - total flux cleaned = -0.00251198 Jy ! Component: 3150 - total flux cleaned = -0.00251202 Jy ! Component: 3200 - total flux cleaned = -0.00255636 Jy ! Component: 3250 - total flux cleaned = -0.00258559 Jy ! Component: 3300 - total flux cleaned = -0.00254201 Jy ! Component: 3350 - total flux cleaned = -0.002542 Jy ! Component: 3400 - total flux cleaned = -0.00254196 Jy ! Component: 3450 - total flux cleaned = -0.002485 Jy ! Component: 3500 - total flux cleaned = -0.00247084 Jy ! Component: 3550 - total flux cleaned = -0.00245675 Jy ! Component: 3600 - total flux cleaned = -0.00244266 Jy ! Component: 3650 - total flux cleaned = -0.0024009 Jy ! Component: 3700 - total flux cleaned = -0.00240074 Jy ! Component: 3750 - total flux cleaned = -0.00237322 Jy ! Component: 3800 - total flux cleaned = -0.00235948 Jy ! Component: 3850 - total flux cleaned = -0.00234578 Jy ! Component: 3900 - total flux cleaned = -0.00231865 Jy ! Component: 3950 - total flux cleaned = -0.00233225 Jy ! Component: 4000 - total flux cleaned = -0.00230534 Jy ! Component: 4050 - total flux cleaned = -0.00229184 Jy ! Total flux subtracted in 4096 components = -0.00229188 Jy ! Clean residual min=-0.000766 max=0.000762 Jy/beam ! Clean residual mean=-0.000001 rms=0.000248 Jy/beam ! Combined flux in latest and established models = 0.103366 Jy keep ! Adding 286 model components to the UV plane model. ! The established model now contains 342 components and 0.103366 Jy ![Exited script file: muppet] wmap "J1140-2800_S_2017_02_19_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.752 x 14.16 at 19.55 degrees (North through East) ! Clean map min=-0.0019127 max=0.1042 Jy/beam ! Writing clean map to FITS file: J1140-2800_S_2017_02_19_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.104198 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000242117 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.697087 0.697087 1.39417 2.78835 5.57669 11.1534 22.3068 44.6135 89.2271 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.104 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.752 x 14.16 at 19.55 degrees (North through East) ! Clean map min=-0.0019127 max=0.1042 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1140-2800_S_2017_02_19_pus_uvs.log closed on Sat May 4 18:50:12 2019