! Started logfile: J1140-2730_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:13:00 2019 obs J1140-2730_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J1140-2730_S_2017_01_16_pus_uva.fits ! AN table 1: 75 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.775111 visibilities/baseline/integration-bin. ! Found source: J1140-2730 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 10464 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1140-2730_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 87 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 87 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 87 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 199 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.874456Jy sigma=0.005577 ! Fit after self-cal, rms=0.862627Jy sigma=0.005515 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.13 mas, bmaj=12.46 mas, bpa=13.26 degrees ! Estimated noise=1934.56 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.115246 Jy ! Component: 100 - total flux cleaned = 0.14124 Jy ! Total flux subtracted in 100 components = 0.14124 Jy ! Clean residual min=-0.006412 max=0.009025 Jy/beam ! Clean residual mean=0.000016 rms=0.001831 Jy/beam ! Combined flux in latest and established models = 0.14124 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.14124 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.189912Jy sigma=0.000679 ! Fit after self-cal, rms=0.189890Jy sigma=0.000679 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.892 mas, bmaj=14.54 mas, bpa=12.63 degrees ! Estimated noise=1160.75 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0105908 Jy ! Component: 100 - total flux cleaned = 0.0161974 Jy ! Component: 150 - total flux cleaned = 0.0192803 Jy ! Component: 200 - total flux cleaned = 0.0210095 Jy ! Total flux subtracted in 200 components = 0.0210095 Jy ! Clean residual min=-0.004285 max=0.004824 Jy/beam ! Clean residual mean=0.000015 rms=0.001124 Jy/beam ! Combined flux in latest and established models = 0.162249 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 45 components and 0.162249 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.188473Jy sigma=0.000674 ! Fit after self-cal, rms=0.188502Jy sigma=0.000674 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.93 HN 0.97 KP 0.99 ! LA 1.05 MK 1.00* NL 0.94 OV 1.00 ! PT 1.01 SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.02 HN 1.09 KP 0.98 ! LA 0.96 MK 1.00* NL 0.98 OV 1.04 ! PT 1.00 SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.24 FD 1.04 HN 1.11 KP 1.01 ! LA 1.03 MK 1.00* NL 0.96 OV 0.96 ! PT 0.98 SC 0.99 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.01 HN 1.02 KP 1.05 ! LA 0.63 MK 1.00* NL 1.00* OV 0.95 ! PT 1.06 SC 0.94 ! ! ! Fit before self-cal, rms=0.188502Jy sigma=0.000674 ! Fit after self-cal, rms=0.144593Jy sigma=0.000669 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.895 mas, bmaj=14.6 mas, bpa=12.76 degrees ! Estimated noise=1167.41 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000507853 Jy ! Component: 100 - total flux cleaned = 0.000385834 Jy ! Component: 150 - total flux cleaned = 0.000316219 Jy ! Component: 200 - total flux cleaned = 0.000250491 Jy ! Total flux subtracted in 200 components = 0.000250491 Jy ! Clean residual min=-0.003759 max=0.004418 Jy/beam ! Clean residual mean=0.000005 rms=0.000957 Jy/beam ! Combined flux in latest and established models = 0.1625 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 58 components and 0.1625 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.144560Jy sigma=0.000669 ! Fit after self-cal, rms=0.144447Jy sigma=0.000669 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.144447Jy sigma=0.000669 ! Fit after self-cal, rms=0.137359Jy sigma=0.000666 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.888 mas, bmaj=14.58 mas, bpa=12.8 degrees ! Estimated noise=1176.52 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00120213 Jy ! Component: 100 - total flux cleaned = 0.0011682 Jy ! Component: 150 - total flux cleaned = 0.00116847 Jy ! Component: 200 - total flux cleaned = 0.00114151 Jy ! Total flux subtracted in 200 components = 0.00114151 Jy ! Clean residual min=-0.003178 max=0.003931 Jy/beam ! Clean residual mean=0.000001 rms=0.000857 Jy/beam ! Combined flux in latest and established models = 0.163641 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 66 components and 0.163641 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137312Jy sigma=0.000666 ! Fit after self-cal, rms=0.137336Jy sigma=0.000666 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-89, -123). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00316144 Jy ! Component: 100 - total flux cleaned = 0.00389778 Jy ! Component: 150 - total flux cleaned = 0.00413004 Jy ! Component: 200 - total flux cleaned = 0.00429586 Jy ! Total flux subtracted in 200 components = 0.00429586 Jy ! Clean residual min=-0.002981 max=0.003310 Jy/beam ! Clean residual mean=0.000007 rms=0.000804 Jy/beam ! Combined flux in latest and established models = 0.167937 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 85 components and 0.167937 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137228Jy sigma=0.000666 ! Fit after self-cal, rms=0.137227Jy sigma=0.000666 ! Inverting map ! Added new window around map position (109, 43.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00236589 Jy ! Component: 100 - total flux cleaned = 0.00256504 Jy ! Component: 150 - total flux cleaned = 0.00273323 Jy ! Component: 200 - total flux cleaned = 0.00278082 Jy ! Total flux subtracted in 200 components = 0.00278082 Jy ! Clean residual min=-0.002830 max=0.002967 Jy/beam ! Clean residual mean=0.000007 rms=0.000745 Jy/beam ! Combined flux in latest and established models = 0.170718 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 112 components and 0.170718 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137099Jy sigma=0.000665 ! Fit after self-cal, rms=0.137080Jy sigma=0.000665 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137080Jy sigma=0.000665 ! Fit after self-cal, rms=0.123357Jy sigma=0.000663 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.89 mas, bmaj=14.6 mas, bpa=12.8 degrees ! Estimated noise=1174.85 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000514641 Jy ! Component: 100 - total flux cleaned = -0.000814112 Jy ! Component: 150 - total flux cleaned = -0.00111625 Jy ! Component: 200 - total flux cleaned = -0.00134661 Jy ! Total flux subtracted in 200 components = -0.00134661 Jy ! Clean residual min=-0.002780 max=0.002426 Jy/beam ! Clean residual mean=0.000003 rms=0.000631 Jy/beam ! Combined flux in latest and established models = 0.169371 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 131 components and 0.169371 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123318Jy sigma=0.000663 ! Fit after self-cal, rms=0.123243Jy sigma=0.000663 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000275353 Jy ! Component: 100 - total flux cleaned = -0.000344655 Jy ! Component: 150 - total flux cleaned = -0.000406467 Jy ! Component: 200 - total flux cleaned = -0.000435641 Jy ! Total flux subtracted in 200 components = -0.000435641 Jy ! Clean residual min=-0.002707 max=0.002305 Jy/beam ! Clean residual mean=0.000003 rms=0.000621 Jy/beam ! Combined flux in latest and established models = 0.168936 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 149 components and 0.168936 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123225Jy sigma=0.000662 ! Fit after self-cal, rms=0.123222Jy sigma=0.000662 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123222Jy sigma=0.000662 ! Fit after self-cal, rms=0.122939Jy sigma=0.000662 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.146 mas, bmaj=21.48 mas, bpa=4.106 degrees ! Estimated noise=1359.82 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000696997 Jy ! Component: 100 - total flux cleaned = -0.000722742 Jy ! Component: 150 - total flux cleaned = -0.000747013 Jy ! Component: 200 - total flux cleaned = -0.000746038 Jy ! Total flux subtracted in 200 components = -0.000746038 Jy ! Clean residual min=-0.002315 max=0.002564 Jy/beam ! Clean residual mean=0.000006 rms=0.000685 Jy/beam ! Combined flux in latest and established models = 0.16819 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 160 components and 0.16819 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122934Jy sigma=0.000662 ! Fit after self-cal, rms=0.122928Jy sigma=0.000662 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000140276 Jy ! Component: 100 - total flux cleaned = -0.000183354 Jy ! Component: 150 - total flux cleaned = -0.000182217 Jy ! Component: 200 - total flux cleaned = -0.00016241 Jy ! Total flux subtracted in 200 components = -0.00016241 Jy ! Clean residual min=-0.002324 max=0.002538 Jy/beam ! Clean residual mean=0.000006 rms=0.000680 Jy/beam ! Combined flux in latest and established models = 0.168027 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 168 components and 0.168027 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122926Jy sigma=0.000662 ! Fit after self-cal, rms=0.122925Jy sigma=0.000662 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.89 mas, bmaj=14.6 mas, bpa=12.8 degrees ! Estimated noise=1173.08 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.89 x 14.6 at 12.8 degrees (North through East) ! Clean map min=-0.0025549 max=0.14318 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.128 mas, bmaj=12.55 mas, bpa=13.37 degrees ! Estimated noise=1937.84 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.115195 Jy ! Component: 100 - total flux cleaned = 0.141289 Jy ! Component: 150 - total flux cleaned = 0.150762 Jy ! Component: 200 - total flux cleaned = 0.156396 Jy ! Total flux subtracted in 200 components = 0.156396 Jy ! Clean residual min=-0.005038 max=0.004768 Jy/beam ! Clean residual mean=0.000006 rms=0.001315 Jy/beam ! Combined flux in latest and established models = 0.156396 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.156396 Jy ! Inverting map and beam ! Estimated beam: bmin=3.89 mas, bmaj=14.6 mas, bpa=12.8 degrees ! Estimated noise=1173.08 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00503048 Jy ! Component: 100 - total flux cleaned = 0.00791294 Jy ! Component: 150 - total flux cleaned = 0.00876676 Jy ! Component: 200 - total flux cleaned = 0.00910841 Jy ! Total flux subtracted in 200 components = 0.00910841 Jy ! Clean residual min=-0.003217 max=0.003006 Jy/beam ! Clean residual mean=-0.000003 rms=0.000681 Jy/beam ! Combined flux in latest and established models = 0.165505 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 53 components and 0.165505 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.146 mas, bmaj=21.48 mas, bpa=4.106 degrees ! Estimated noise=1359.82 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00163232 Jy ! Component: 100 - total flux cleaned = 0.00154108 Jy ! Component: 150 - total flux cleaned = 0.00154289 Jy ! Component: 200 - total flux cleaned = 0.00154365 Jy ! Total flux subtracted in 200 components = 0.00154365 Jy ! Clean residual min=-0.002601 max=0.002338 Jy/beam ! Clean residual mean=0.000002 rms=0.000722 Jy/beam ! Combined flux in latest and established models = 0.167048 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.24235e-07 Jy ! Component: 100 - total flux cleaned = 1.23574e-06 Jy ! Component: 150 - total flux cleaned = 1.77988e-06 Jy ! Component: 200 - total flux cleaned = 3.23523e-05 Jy ! Total flux subtracted in 200 components = 3.23523e-05 Jy ! Clean residual min=-0.002503 max=0.002277 Jy/beam ! Clean residual mean=0.000003 rms=0.000706 Jy/beam ! Combined flux in latest and established models = 0.167081 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 89 components and 0.167081 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.89 mas, bmaj=14.6 mas, bpa=12.8 degrees ! Estimated noise=1173.08 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.82757e-05 Jy ! Component: 100 - total flux cleaned = -2.34722e-05 Jy ! Component: 150 - total flux cleaned = -0.000114989 Jy ! Component: 200 - total flux cleaned = -7.33569e-05 Jy ! Total flux subtracted in 200 components = -7.33569e-05 Jy ! Clean residual min=-0.002785 max=0.002426 Jy/beam ! Clean residual mean=0.000001 rms=0.000612 Jy/beam ! Combined flux in latest and established models = 0.167007 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 107 components and 0.167007 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122959Jy sigma=0.000662 ! Fit after self-cal, rms=0.122948Jy sigma=0.000662 wmodel J1140-2730_S_2017_01_16_pus_map.mod ! Writing 107 model components to file: J1140-2730_S_2017_01_16_pus_map.mod wobs J1140-2730_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J1140-2730_S_2017_01_16_pus_uvs.fits wwins J1140-2730_S_2017_01_16_pus_map.win ! wwins: Wrote 3 windows to J1140-2730_S_2017_01_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00086072 Jy ! Component: 100 - total flux cleaned = -0.00148382 Jy ! Component: 150 - total flux cleaned = -0.00167463 Jy ! Component: 200 - total flux cleaned = -0.00185306 Jy ! Component: 250 - total flux cleaned = -0.00192127 Jy ! Component: 300 - total flux cleaned = -0.00205396 Jy ! Component: 350 - total flux cleaned = -0.002214 Jy ! Component: 400 - total flux cleaned = -0.0024 Jy ! Component: 450 - total flux cleaned = -0.00261099 Jy ! Component: 500 - total flux cleaned = -0.00284629 Jy ! Component: 550 - total flux cleaned = -0.00296181 Jy ! Component: 600 - total flux cleaned = -0.00315909 Jy ! Component: 650 - total flux cleaned = -0.00335147 Jy ! Component: 700 - total flux cleaned = -0.00345912 Jy ! Component: 750 - total flux cleaned = -0.00353805 Jy ! Component: 800 - total flux cleaned = -0.00364164 Jy ! Component: 850 - total flux cleaned = -0.00371736 Jy ! Component: 900 - total flux cleaned = -0.0037168 Jy ! Component: 950 - total flux cleaned = -0.00374109 Jy ! Component: 1000 - total flux cleaned = -0.00374097 Jy ! Component: 1050 - total flux cleaned = -0.00374151 Jy ! Component: 1100 - total flux cleaned = -0.00378855 Jy ! Component: 1150 - total flux cleaned = -0.00383431 Jy ! Component: 1200 - total flux cleaned = -0.00378884 Jy ! Component: 1250 - total flux cleaned = -0.003811 Jy ! Component: 1300 - total flux cleaned = -0.00376692 Jy ! Component: 1350 - total flux cleaned = -0.0037234 Jy ! Component: 1400 - total flux cleaned = -0.00368044 Jy ! Component: 1450 - total flux cleaned = -0.00365885 Jy ! Component: 1500 - total flux cleaned = -0.00355422 Jy ! Component: 1550 - total flux cleaned = -0.00349277 Jy ! Component: 1600 - total flux cleaned = -0.00341156 Jy ! Component: 1650 - total flux cleaned = -0.00345204 Jy ! Component: 1700 - total flux cleaned = -0.00337281 Jy ! Component: 1750 - total flux cleaned = -0.00335338 Jy ! Component: 1800 - total flux cleaned = -0.00337263 Jy ! Component: 1850 - total flux cleaned = -0.0032958 Jy ! Component: 1900 - total flux cleaned = -0.00323897 Jy ! Component: 1950 - total flux cleaned = -0.00320165 Jy ! Component: 2000 - total flux cleaned = -0.00314616 Jy ! Component: 2050 - total flux cleaned = -0.00312772 Jy ! Component: 2100 - total flux cleaned = -0.00307317 Jy ! Component: 2150 - total flux cleaned = -0.00301906 Jy ! Component: 2200 - total flux cleaned = -0.00298327 Jy ! Component: 2250 - total flux cleaned = -0.00294818 Jy ! Component: 2300 - total flux cleaned = -0.00294785 Jy ! Component: 2350 - total flux cleaned = -0.00289611 Jy ! Component: 2400 - total flux cleaned = -0.00284494 Jy ! Component: 2450 - total flux cleaned = -0.00281129 Jy ! Component: 2500 - total flux cleaned = -0.00274416 Jy ! Component: 2550 - total flux cleaned = -0.00274425 Jy ! Component: 2600 - total flux cleaned = -0.00269472 Jy ! Component: 2650 - total flux cleaned = -0.00264591 Jy ! Component: 2700 - total flux cleaned = -0.00259753 Jy ! Component: 2750 - total flux cleaned = -0.00256544 Jy ! Component: 2800 - total flux cleaned = -0.00250178 Jy ! Component: 2850 - total flux cleaned = -0.00250166 Jy ! Component: 2900 - total flux cleaned = -0.00245469 Jy ! Component: 2950 - total flux cleaned = -0.00245476 Jy ! Component: 3000 - total flux cleaned = -0.0023934 Jy ! Component: 3050 - total flux cleaned = -0.00237815 Jy ! Component: 3100 - total flux cleaned = -0.00236321 Jy ! Component: 3150 - total flux cleaned = -0.00234821 Jy ! Component: 3200 - total flux cleaned = -0.00233338 Jy ! Component: 3250 - total flux cleaned = -0.00227447 Jy ! Component: 3300 - total flux cleaned = -0.00223065 Jy ! Component: 3350 - total flux cleaned = -0.00228885 Jy ! Component: 3400 - total flux cleaned = -0.00224551 Jy ! Component: 3450 - total flux cleaned = -0.0022026 Jy ! Component: 3500 - total flux cleaned = -0.00223099 Jy ! Component: 3550 - total flux cleaned = -0.00221693 Jy ! Component: 3600 - total flux cleaned = -0.00223092 Jy ! Component: 3650 - total flux cleaned = -0.00221695 Jy ! Component: 3700 - total flux cleaned = -0.00224476 Jy ! Component: 3750 - total flux cleaned = -0.00220347 Jy ! Component: 3800 - total flux cleaned = -0.00221728 Jy ! Component: 3850 - total flux cleaned = -0.00225807 Jy ! Component: 3900 - total flux cleaned = -0.002258 Jy ! Component: 3950 - total flux cleaned = -0.00228478 Jy ! Component: 4000 - total flux cleaned = -0.00228468 Jy ! Component: 4050 - total flux cleaned = -0.00233773 Jy ! Total flux subtracted in 4096 components = -0.00231133 Jy ! Clean residual min=-0.000735 max=0.000957 Jy/beam ! Clean residual mean=-0.000000 rms=0.000255 Jy/beam ! Combined flux in latest and established models = 0.164696 Jy keep ! Adding 284 model components to the UV plane model. ! The established model now contains 391 components and 0.164696 Jy ![Exited script file: muppet] wmap "J1140-2730_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.89 x 14.6 at 12.8 degrees (North through East) ! Clean map min=-0.0019133 max=0.1432 Jy/beam ! Writing clean map to FITS file: J1140-2730_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.143202 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000254924 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.534052 0.534052 1.0681 2.13621 4.27242 8.54484 17.0897 34.1794 68.3587 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.143 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.89 x 14.6 at 12.8 degrees (North through East) ! Clean map min=-0.0019133 max=0.1432 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1140-2730_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:13:06 2019