! Started logfile: J1140+1203_S_2017_10_09_pus_uvs.log on Sun May 12 13:11:13 2019 obs J1140+1203_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J1140+1203_S_2017_10_09_pus_uva.fits ! AN table 1: 140 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.387897 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1140+1203 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 7820 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1140+1203_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 650 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 694 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 650 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 955 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.005657Jy sigma=0.008924 ! Fit after self-cal, rms=0.959263Jy sigma=0.008485 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.695 mas, bmaj=13.05 mas, bpa=-15.28 degrees ! Estimated noise=1380.69 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0389808 Jy ! Component: 100 - total flux cleaned = 0.0439723 Jy ! Total flux subtracted in 100 components = 0.0439723 Jy ! Clean residual min=-0.008221 max=0.008446 Jy/beam ! Clean residual mean=-0.000038 rms=0.003737 Jy/beam ! Combined flux in latest and established models = 0.0439723 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.0439723 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138813Jy sigma=0.001280 ! Fit after self-cal, rms=0.137991Jy sigma=0.001274 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.447 mas, bmaj=14.47 mas, bpa=-16.73 degrees ! Estimated noise=1074.91 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000753491 Jy ! Component: 100 - total flux cleaned = -0.00038126 Jy ! Component: 150 - total flux cleaned = -0.00158514 Jy ! Component: 200 - total flux cleaned = -0.00260051 Jy ! Total flux subtracted in 200 components = -0.00260051 Jy ! Clean residual min=-0.009150 max=0.008981 Jy/beam ! Clean residual mean=-0.000042 rms=0.004136 Jy/beam ! Combined flux in latest and established models = 0.0413718 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 40 components and 0.0413718 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137166Jy sigma=0.001265 ! Fit after self-cal, rms=0.136924Jy sigma=0.001264 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.32 FD 3.53 HN 2.91 KP 3.40 ! LA 3.40 MK 2.87 NL 3.18 OV 1.00* ! PT 0.32 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.12 HN 1.02 KP 0.94 ! LA 0.90 MK 0.97 NL 0.96 OV 1.00* ! PT 1.16 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.16 HN 1.06 KP 0.91 ! LA 0.84 MK 1.10 NL 1.24 OV 1.00* ! PT 0.94 ! ! ! Correcting IF 4. ! A total of 129 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.98 HN 0.89 KP 1.00* ! LA 1.00* MK 0.89 NL 1.00* OV 1.00* ! PT 0.91 ! ! ! Fit before self-cal, rms=0.136924Jy sigma=0.001264 ! Fit after self-cal, rms=0.379033Jy sigma=0.001156 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.618 mas, bmaj=12.71 mas, bpa=-16.73 degrees ! Estimated noise=1233.07 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-48.5, -102). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00867684 Jy ! Component: 100 - total flux cleaned = 0.0128788 Jy ! Component: 150 - total flux cleaned = 0.0141936 Jy ! Component: 200 - total flux cleaned = 0.0147312 Jy ! Total flux subtracted in 200 components = 0.0147312 Jy ! Clean residual min=-0.005219 max=0.007823 Jy/beam ! Clean residual mean=0.000002 rms=0.001373 Jy/beam ! Combined flux in latest and established models = 0.056103 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 66 components and 0.056103 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.376522Jy sigma=0.001158 ! Fit after self-cal, rms=0.385705Jy sigma=0.001147 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.385705Jy sigma=0.001147 ! Fit after self-cal, rms=0.342993Jy sigma=0.001145 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.751 mas, bmaj=12.55 mas, bpa=-17.09 degrees ! Estimated noise=1331.7 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0010587 Jy ! Component: 100 - total flux cleaned = 0.00217154 Jy ! Component: 150 - total flux cleaned = 0.00307526 Jy ! Component: 200 - total flux cleaned = 0.00388514 Jy ! Total flux subtracted in 200 components = 0.00388514 Jy ! Clean residual min=-0.002634 max=0.003477 Jy/beam ! Clean residual mean=-0.000006 rms=0.000822 Jy/beam ! Combined flux in latest and established models = 0.0599882 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 91 components and 0.0599882 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.342811Jy sigma=0.001144 ! Fit after self-cal, rms=0.342207Jy sigma=0.001143 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00132659 Jy ! Component: 100 - total flux cleaned = 0.00233899 Jy ! Component: 150 - total flux cleaned = 0.00319819 Jy ! Component: 200 - total flux cleaned = 0.00365132 Jy ! Total flux subtracted in 200 components = 0.00365132 Jy ! Clean residual min=-0.002695 max=0.003075 Jy/beam ! Clean residual mean=-0.000000 rms=0.000825 Jy/beam ! Combined flux in latest and established models = 0.0636395 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 113 components and 0.0636395 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.342072Jy sigma=0.001143 ! Fit after self-cal, rms=0.341928Jy sigma=0.001143 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.341928Jy sigma=0.001143 ! Fit after self-cal, rms=0.349520Jy sigma=0.001142 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.843 mas, bmaj=12.41 mas, bpa=-17.62 degrees ! Estimated noise=1343.56 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00177045 Jy ! Component: 100 - total flux cleaned = 0.00278318 Jy ! Component: 150 - total flux cleaned = 0.00352691 Jy ! Component: 200 - total flux cleaned = 0.00395337 Jy ! Total flux subtracted in 200 components = 0.00395337 Jy ! Clean residual min=-0.002310 max=0.003436 Jy/beam ! Clean residual mean=-0.000006 rms=0.000752 Jy/beam ! Combined flux in latest and established models = 0.0675928 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 123 components and 0.0675928 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.349353Jy sigma=0.001142 ! Fit after self-cal, rms=0.349107Jy sigma=0.001142 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (6.5, -96.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00316559 Jy ! Component: 100 - total flux cleaned = 0.00418912 Jy ! Component: 150 - total flux cleaned = 0.00438925 Jy ! Component: 200 - total flux cleaned = 0.00479562 Jy ! Total flux subtracted in 200 components = 0.00479562 Jy ! Clean residual min=-0.002502 max=0.002711 Jy/beam ! Clean residual mean=-0.000001 rms=0.000670 Jy/beam ! Combined flux in latest and established models = 0.0723884 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 149 components and 0.0723884 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.348912Jy sigma=0.001142 ! Fit after self-cal, rms=0.348634Jy sigma=0.001141 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.348634Jy sigma=0.001141 ! Fit after self-cal, rms=0.324667Jy sigma=0.001141 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.177 mas, bmaj=13.35 mas, bpa=-32.23 degrees ! Estimated noise=1451.01 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00245548 Jy ! Component: 100 - total flux cleaned = 0.00405446 Jy ! Component: 150 - total flux cleaned = 0.00498437 Jy ! Component: 200 - total flux cleaned = 0.00570056 Jy ! Total flux subtracted in 200 components = 0.00570056 Jy ! Clean residual min=-0.002157 max=0.002430 Jy/beam ! Clean residual mean=-0.000006 rms=0.000630 Jy/beam ! Combined flux in latest and established models = 0.078089 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 179 components and 0.078089 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.324508Jy sigma=0.001141 ! Fit after self-cal, rms=0.324126Jy sigma=0.001141 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00154958 Jy ! Component: 100 - total flux cleaned = 0.00223219 Jy ! Component: 150 - total flux cleaned = 0.00283749 Jy ! Component: 200 - total flux cleaned = 0.00317424 Jy ! Total flux subtracted in 200 components = 0.00317424 Jy ! Clean residual min=-0.002215 max=0.002365 Jy/beam ! Clean residual mean=-0.000003 rms=0.000626 Jy/beam ! Combined flux in latest and established models = 0.0812633 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 203 components and 0.0812632 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.324029Jy sigma=0.001140 ! Fit after self-cal, rms=0.323783Jy sigma=0.001140 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.908 mas, bmaj=12.28 mas, bpa=-17.92 degrees ! Estimated noise=1347.48 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.908 x 12.28 at -17.92 degrees (North through East) ! Clean map min=-0.0059018 max=0.056404 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.045 mas, bmaj=11.27 mas, bpa=-14.98 degrees ! Estimated noise=1764.46 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0465597 Jy ! Component: 100 - total flux cleaned = 0.0600136 Jy ! Component: 150 - total flux cleaned = 0.0667153 Jy ! Component: 200 - total flux cleaned = 0.0711047 Jy ! Total flux subtracted in 200 components = 0.0711047 Jy ! Clean residual min=-0.006271 max=0.006819 Jy/beam ! Clean residual mean=-0.000019 rms=0.001770 Jy/beam ! Combined flux in latest and established models = 0.0711047 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.0711047 Jy ! Inverting map and beam ! Estimated beam: bmin=4.908 mas, bmaj=12.28 mas, bpa=-17.92 degrees ! Estimated noise=1347.48 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0063248 Jy ! Component: 100 - total flux cleaned = 0.00987708 Jy ! Component: 150 - total flux cleaned = 0.0112202 Jy ! Component: 200 - total flux cleaned = 0.011796 Jy ! Total flux subtracted in 200 components = 0.011796 Jy ! Clean residual min=-0.003272 max=0.003757 Jy/beam ! Clean residual mean=-0.000008 rms=0.000925 Jy/beam ! Combined flux in latest and established models = 0.0829007 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 65 components and 0.0829007 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.177 mas, bmaj=13.35 mas, bpa=-32.23 degrees ! Estimated noise=1451.01 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0011656 Jy ! Component: 100 - total flux cleaned = 0.0021425 Jy ! Component: 150 - total flux cleaned = 0.00294738 Jy ! Component: 200 - total flux cleaned = 0.00343195 Jy ! Total flux subtracted in 200 components = 0.00343195 Jy ! Clean residual min=-0.002663 max=0.002515 Jy/beam ! Clean residual mean=-0.000004 rms=0.000725 Jy/beam ! Combined flux in latest and established models = 0.0863326 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000222918 Jy ! Component: 100 - total flux cleaned = 0.000431925 Jy ! Component: 150 - total flux cleaned = 0.000480083 Jy ! Component: 200 - total flux cleaned = 0.000434631 Jy ! Total flux subtracted in 200 components = 0.000434631 Jy ! Clean residual min=-0.002548 max=0.002350 Jy/beam ! Clean residual mean=-0.000003 rms=0.000670 Jy/beam ! Combined flux in latest and established models = 0.0867673 Jy ! Adding 61 model components to the UV plane model. ! The established model now contains 126 components and 0.0867672 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.908 mas, bmaj=12.28 mas, bpa=-17.92 degrees ! Estimated noise=1347.48 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000503988 Jy ! Component: 100 - total flux cleaned = 0.000353992 Jy ! Component: 150 - total flux cleaned = 0.000487282 Jy ! Component: 200 - total flux cleaned = 0.000676515 Jy ! Total flux subtracted in 200 components = 0.000676515 Jy ! Clean residual min=-0.002271 max=0.002982 Jy/beam ! Clean residual mean=-0.000002 rms=0.000685 Jy/beam ! Combined flux in latest and established models = 0.0874438 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 151 components and 0.0874438 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.323730Jy sigma=0.001140 ! Fit after self-cal, rms=0.323461Jy sigma=0.001140 wmodel J1140+1203_S_2017_10_09_pus_map.mod ! Writing 151 model components to file: J1140+1203_S_2017_10_09_pus_map.mod wobs J1140+1203_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J1140+1203_S_2017_10_09_pus_uvs.fits wwins J1140+1203_S_2017_10_09_pus_map.win ! wwins: Wrote 3 windows to J1140+1203_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0011551 Jy ! Component: 100 - total flux cleaned = 0.00221274 Jy ! Component: 150 - total flux cleaned = 0.00321532 Jy ! Component: 200 - total flux cleaned = 0.00398434 Jy ! Component: 250 - total flux cleaned = 0.00450249 Jy ! Component: 300 - total flux cleaned = 0.00500392 Jy ! Component: 350 - total flux cleaned = 0.00531754 Jy ! Component: 400 - total flux cleaned = 0.00565745 Jy ! Component: 450 - total flux cleaned = 0.00605666 Jy ! Component: 500 - total flux cleaned = 0.00638481 Jy ! Component: 550 - total flux cleaned = 0.00687137 Jy ! Component: 600 - total flux cleaned = 0.00719158 Jy ! Component: 650 - total flux cleaned = 0.0075404 Jy ! Component: 700 - total flux cleaned = 0.00794788 Jy ! Component: 750 - total flux cleaned = 0.0082276 Jy ! Component: 800 - total flux cleaned = 0.00853624 Jy ! Component: 850 - total flux cleaned = 0.00875142 Jy ! Component: 900 - total flux cleaned = 0.00893502 Jy ! Component: 950 - total flux cleaned = 0.00896558 Jy ! Component: 1000 - total flux cleaned = 0.0090878 Jy ! Component: 1050 - total flux cleaned = 0.0091794 Jy ! Component: 1100 - total flux cleaned = 0.00930159 Jy ! Component: 1150 - total flux cleaned = 0.00939331 Jy ! Component: 1200 - total flux cleaned = 0.00945469 Jy ! Component: 1250 - total flux cleaned = 0.00945446 Jy ! Component: 1300 - total flux cleaned = 0.00942332 Jy ! Component: 1350 - total flux cleaned = 0.00942335 Jy ! Component: 1400 - total flux cleaned = 0.00936119 Jy ! Component: 1450 - total flux cleaned = 0.00932986 Jy ! Component: 1500 - total flux cleaned = 0.0092983 Jy ! Component: 1550 - total flux cleaned = 0.0092979 Jy ! Component: 1600 - total flux cleaned = 0.0093302 Jy ! Component: 1650 - total flux cleaned = 0.00929831 Jy ! Component: 1700 - total flux cleaned = 0.00926592 Jy ! Component: 1750 - total flux cleaned = 0.0091335 Jy ! Component: 1800 - total flux cleaned = 0.0092002 Jy ! Component: 1850 - total flux cleaned = 0.00916615 Jy ! Component: 1900 - total flux cleaned = 0.00913132 Jy ! Component: 1950 - total flux cleaned = 0.00916676 Jy ! Component: 2000 - total flux cleaned = 0.00923817 Jy ! Component: 2050 - total flux cleaned = 0.00916639 Jy ! Component: 2100 - total flux cleaned = 0.00920325 Jy ! Component: 2150 - total flux cleaned = 0.00916652 Jy ! Component: 2200 - total flux cleaned = 0.00928001 Jy ! Component: 2250 - total flux cleaned = 0.00928006 Jy ! Component: 2300 - total flux cleaned = 0.00939792 Jy ! Component: 2350 - total flux cleaned = 0.00935817 Jy ! Component: 2400 - total flux cleaned = 0.00948036 Jy ! Component: 2450 - total flux cleaned = 0.00948018 Jy ! Component: 2500 - total flux cleaned = 0.00956449 Jy ! Component: 2550 - total flux cleaned = 0.00965018 Jy ! Component: 2600 - total flux cleaned = 0.00965029 Jy ! Component: 2650 - total flux cleaned = 0.00965006 Jy ! Component: 2700 - total flux cleaned = 0.00969566 Jy ! Component: 2750 - total flux cleaned = 0.00960143 Jy ! Component: 2800 - total flux cleaned = 0.00974482 Jy ! Component: 2850 - total flux cleaned = 0.00959905 Jy ! Component: 2900 - total flux cleaned = 0.00964772 Jy ! Component: 2950 - total flux cleaned = 0.00964751 Jy ! Component: 3000 - total flux cleaned = 0.00964732 Jy ! Component: 3050 - total flux cleaned = 0.00964726 Jy ! Component: 3100 - total flux cleaned = 0.00970165 Jy ! Component: 3150 - total flux cleaned = 0.00970122 Jy ! Component: 3200 - total flux cleaned = 0.0096436 Jy ! Component: 3250 - total flux cleaned = 0.00987562 Jy ! Component: 3300 - total flux cleaned = 0.00999547 Jy ! Component: 3350 - total flux cleaned = 0.0100549 Jy ! Component: 3400 - total flux cleaned = 0.0100536 Jy ! Component: 3450 - total flux cleaned = 0.0103737 Jy ! Component: 3500 - total flux cleaned = 0.0104399 Jy ! Component: 3550 - total flux cleaned = 0.0105079 Jy ! Component: 3600 - total flux cleaned = 0.0105769 Jy ! Component: 3650 - total flux cleaned = 0.0107191 Jy ! Component: 3700 - total flux cleaned = 0.0107918 Jy ! Component: 3750 - total flux cleaned = 0.0107903 Jy ! Component: 3800 - total flux cleaned = 0.0109417 Jy ! Component: 3850 - total flux cleaned = 0.0109424 Jy ! Component: 3900 - total flux cleaned = 0.0109409 Jy ! Component: 3950 - total flux cleaned = 0.0111839 Jy ! Component: 4000 - total flux cleaned = 0.0112674 Jy ! Component: 4050 - total flux cleaned = 0.0113536 Jy ! Total flux subtracted in 4096 components = 0.0110895 Jy ! Clean residual min=-0.005003 max=0.005127 Jy/beam ! Clean residual mean=-0.000002 rms=0.001307 Jy/beam ! Combined flux in latest and established models = 0.0985333 Jy keep ! Adding 206 model components to the UV plane model. ! The established model now contains 356 components and 0.0985333 Jy ![Exited script file: muppet] wmap "J1140+1203_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.908 x 12.28 at -17.92 degrees (North through East) ! Clean map min=-0.005834 max=0.059003 Jy/beam ! Writing clean map to FITS file: J1140+1203_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0590029 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000764774 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -3.88849 3.88849 7.77698 15.554 31.1079 62.2158 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0022 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.059 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.908 x 12.28 at -17.92 degrees (North through East) ! Clean map min=-0.005834 max=0.059003 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1140+1203_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:11:19 2019