! Started logfile: J1139-1552_S_2017_05_31_pus_uvs.log on Tue Feb 5 21:47:04 2019 obs J1139-1552_S_2017_05_31_pus_uva.fits ! Reading UV FITS file: J1139-1552_S_2017_05_31_pus_uva.fits ! AN table 1: 76 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.754678 visibilities/baseline/integration-bin. ! Found source: J1139-1552 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 703 lines of history. ! ! Reading 10324 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1139-1552_S_2017_05_31_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 101 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 163 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 163 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 418 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.568321Jy sigma=0.003590 ! Fit after self-cal, rms=0.521709Jy sigma=0.003303 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.33 mas, bmaj=7.325 mas, bpa=2.943 degrees ! Estimated noise=1852.38 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.469681 Jy ! Component: 100 - total flux cleaned = 0.57541 Jy ! Total flux subtracted in 100 components = 0.57541 Jy ! Clean residual min=-0.036715 max=0.037019 Jy/beam ! Clean residual mean=-0.000051 rms=0.010269 Jy/beam ! Combined flux in latest and established models = 0.575409 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.575409 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.375055Jy sigma=0.000959 ! Fit after self-cal, rms=0.375067Jy sigma=0.000959 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.856 mas, bmaj=8.515 mas, bpa=3.632 degrees ! Estimated noise=1213.84 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00152694 Jy ! Component: 100 - total flux cleaned = 0.00152274 Jy ! Component: 150 - total flux cleaned = 0.00195672 Jy ! Component: 200 - total flux cleaned = 0.00195537 Jy ! Total flux subtracted in 200 components = 0.00195537 Jy ! Clean residual min=-0.025274 max=0.020616 Jy/beam ! Clean residual mean=-0.000017 rms=0.005403 Jy/beam ! Combined flux in latest and established models = 0.577365 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 17 components and 0.577365 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.370419Jy sigma=0.000955 ! Fit after self-cal, rms=0.370407Jy sigma=0.000954 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.38 FD 0.96 HN 1.04 KP 1.03 ! LA 1.01 MK 0.93 NL 0.90 OV 1.02 ! PT 1.03 SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 1.07 KP 0.98 ! LA 0.99 MK 0.80 NL 1.05 OV 1.07 ! PT 1.00 SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 1.08 KP 1.00 ! LA 0.98 MK 0.88 NL 1.08 OV 0.98 ! PT 0.98 SC 1.03 ! ! ! Correcting IF 4. ! A total of 81 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.05 HN 1.01 KP 1.17 ! LA 0.84 MK 1.97 NL 1.00* OV 1.00* ! PT 1.01 SC 1.00* ! ! ! Fit before self-cal, rms=0.370407Jy sigma=0.000954 ! Fit after self-cal, rms=0.150309Jy sigma=0.000743 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.873 mas, bmaj=8.531 mas, bpa=4.287 degrees ! Estimated noise=1210.69 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00742079 Jy ! Component: 100 - total flux cleaned = -0.00852625 Jy ! Component: 150 - total flux cleaned = -0.00888348 Jy ! Component: 200 - total flux cleaned = -0.00904809 Jy ! Total flux subtracted in 200 components = -0.00904809 Jy ! Clean residual min=-0.012124 max=0.011888 Jy/beam ! Clean residual mean=-0.000019 rms=0.002866 Jy/beam ! Combined flux in latest and established models = 0.568317 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 29 components and 0.568317 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.149588Jy sigma=0.000737 ! Fit after self-cal, rms=0.149455Jy sigma=0.000737 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.149455Jy sigma=0.000737 ! Fit after self-cal, rms=0.139502Jy sigma=0.000681 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.867 mas, bmaj=8.53 mas, bpa=4.19 degrees ! Estimated noise=1208.98 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.74175e-05 Jy ! Component: 100 - total flux cleaned = 9.81981e-05 Jy ! Component: 150 - total flux cleaned = 9.57247e-05 Jy ! Component: 200 - total flux cleaned = 9.26353e-05 Jy ! Total flux subtracted in 200 components = 9.26353e-05 Jy ! Clean residual min=-0.003353 max=0.003631 Jy/beam ! Clean residual mean=-0.000007 rms=0.000853 Jy/beam ! Combined flux in latest and established models = 0.568409 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 37 components and 0.568409 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139306Jy sigma=0.000681 ! Fit after self-cal, rms=0.139362Jy sigma=0.000681 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (63, 35.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00224279 Jy ! Component: 100 - total flux cleaned = 0.0022479 Jy ! Component: 150 - total flux cleaned = 0.00217271 Jy ! Component: 200 - total flux cleaned = 0.00217071 Jy ! Total flux subtracted in 200 components = 0.00217071 Jy ! Clean residual min=-0.003176 max=0.003436 Jy/beam ! Clean residual mean=-0.000006 rms=0.000786 Jy/beam ! Combined flux in latest and established models = 0.57058 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 55 components and 0.57058 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139163Jy sigma=0.000680 ! Fit after self-cal, rms=0.139159Jy sigma=0.000680 ! Inverting map ! Added new window around map position (-92.5, -57.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00199198 Jy ! Component: 100 - total flux cleaned = 0.00183657 Jy ! Component: 150 - total flux cleaned = 0.00197192 Jy ! Component: 200 - total flux cleaned = 0.00197031 Jy ! Total flux subtracted in 200 components = 0.00197031 Jy ! Clean residual min=-0.002924 max=0.002788 Jy/beam ! Clean residual mean=-0.000006 rms=0.000741 Jy/beam ! Combined flux in latest and established models = 0.57255 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 69 components and 0.57255 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138991Jy sigma=0.000680 ! Fit after self-cal, rms=0.138987Jy sigma=0.000680 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138987Jy sigma=0.000680 ! Fit after self-cal, rms=0.140182Jy sigma=0.000680 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.87 mas, bmaj=8.541 mas, bpa=4.263 degrees ! Estimated noise=1210.26 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00092779 Jy ! Component: 100 - total flux cleaned = 0.00099472 Jy ! Component: 150 - total flux cleaned = 0.00105936 Jy ! Component: 200 - total flux cleaned = 0.000942216 Jy ! Total flux subtracted in 200 components = 0.000942216 Jy ! Clean residual min=-0.002984 max=0.002894 Jy/beam ! Clean residual mean=-0.000007 rms=0.000734 Jy/beam ! Combined flux in latest and established models = 0.573492 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 73 components and 0.573492 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140033Jy sigma=0.000679 ! Fit after self-cal, rms=0.140038Jy sigma=0.000679 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.17073e-05 Jy ! Component: 100 - total flux cleaned = -5.02295e-05 Jy ! Component: 150 - total flux cleaned = -0.000156967 Jy ! Component: 200 - total flux cleaned = -0.00026092 Jy ! Total flux subtracted in 200 components = -0.00026092 Jy ! Clean residual min=-0.002960 max=0.002802 Jy/beam ! Clean residual mean=-0.000006 rms=0.000720 Jy/beam ! Combined flux in latest and established models = 0.573232 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 77 components and 0.573231 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139945Jy sigma=0.000679 ! Fit after self-cal, rms=0.139945Jy sigma=0.000679 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139945Jy sigma=0.000679 ! Fit after self-cal, rms=0.140734Jy sigma=0.000679 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.672 mas, bmaj=15.93 mas, bpa=-1.041 degrees ! Estimated noise=1381.26 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000533825 Jy ! Component: 100 - total flux cleaned = 0.000647334 Jy ! Component: 150 - total flux cleaned = 0.000786444 Jy ! Component: 200 - total flux cleaned = 0.000819104 Jy ! Total flux subtracted in 200 components = 0.000819104 Jy ! Clean residual min=-0.003218 max=0.002440 Jy/beam ! Clean residual mean=-0.000010 rms=0.000789 Jy/beam ! Combined flux in latest and established models = 0.574051 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 95 components and 0.574051 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140696Jy sigma=0.000679 ! Fit after self-cal, rms=0.140699Jy sigma=0.000679 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000112779 Jy ! Component: 100 - total flux cleaned = -0.000115143 Jy ! Component: 150 - total flux cleaned = -0.000142089 Jy ! Component: 200 - total flux cleaned = -0.000140279 Jy ! Total flux subtracted in 200 components = -0.000140279 Jy ! Clean residual min=-0.003192 max=0.002454 Jy/beam ! Clean residual mean=-0.000009 rms=0.000783 Jy/beam ! Combined flux in latest and established models = 0.57391 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 102 components and 0.57391 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140676Jy sigma=0.000679 ! Fit after self-cal, rms=0.140675Jy sigma=0.000679 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.872 mas, bmaj=8.548 mas, bpa=4.297 degrees ! Estimated noise=1211.87 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.872 x 8.548 at 4.297 degrees (North through East) ! Clean map min=-0.0074836 max=0.57811 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140675Jy sigma=0.000679 ! Fit after self-cal, rms=0.122601Jy sigma=0.000601 ! Inverting map and beam ! Estimated beam: bmin=3.867 mas, bmaj=8.523 mas, bpa=4.177 degrees ! Estimated noise=1209.76 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000212624 Jy ! Component: 100 - total flux cleaned = -0.000399909 Jy ! Component: 150 - total flux cleaned = -0.000569797 Jy ! Component: 200 - total flux cleaned = -0.000647918 Jy ! Total flux subtracted in 200 components = -0.000647918 Jy ! Clean residual min=-0.002695 max=0.002602 Jy/beam ! Clean residual mean=-0.000006 rms=0.000647 Jy/beam ! Combined flux in latest and established models = 0.573262 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 117 components and 0.573262 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122558Jy sigma=0.000601 ! Fit after self-cal, rms=0.122558Jy sigma=0.000601 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000104422 Jy ! Component: 100 - total flux cleaned = -0.000214836 Jy ! Component: 150 - total flux cleaned = -0.000284695 Jy ! Component: 200 - total flux cleaned = -0.000386012 Jy ! Total flux subtracted in 200 components = -0.000386012 Jy ! Clean residual min=-0.002651 max=0.002525 Jy/beam ! Clean residual mean=-0.000006 rms=0.000636 Jy/beam ! Combined flux in latest and established models = 0.572876 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 124 components and 0.572877 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122531Jy sigma=0.000601 ! Fit after self-cal, rms=0.122532Jy sigma=0.000601 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122532Jy sigma=0.000601 ! Fit after self-cal, rms=0.122557Jy sigma=0.000601 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.38 mas, bmaj=7.415 mas, bpa=4.374 degrees ! Estimated noise=1783.25 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.444026 Jy ! Component: 100 - total flux cleaned = 0.540853 Jy ! Component: 150 - total flux cleaned = 0.564961 Jy ! Component: 200 - total flux cleaned = 0.57263 Jy ! Total flux subtracted in 200 components = 0.57263 Jy ! Clean residual min=-0.005849 max=0.006549 Jy/beam ! Clean residual mean=0.000005 rms=0.001586 Jy/beam ! Combined flux in latest and established models = 0.57263 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.57263 Jy ! Inverting map and beam ! Estimated beam: bmin=3.868 mas, bmaj=8.524 mas, bpa=4.189 degrees ! Estimated noise=1210.04 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (51, 23.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00135399 Jy ! Component: 100 - total flux cleaned = 0.00198827 Jy ! Component: 150 - total flux cleaned = 0.00282891 Jy ! Component: 200 - total flux cleaned = 0.00356966 Jy ! Total flux subtracted in 200 components = 0.00356966 Jy ! Clean residual min=-0.003367 max=0.003842 Jy/beam ! Clean residual mean=-0.000006 rms=0.000861 Jy/beam ! Combined flux in latest and established models = 0.5762 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 36 components and 0.5762 Jy ! Inverting map ! Added new window around map position (-2.5, 84). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00233062 Jy ! Component: 100 - total flux cleaned = 0.00265536 Jy ! Component: 150 - total flux cleaned = 0.00284781 Jy ! Component: 200 - total flux cleaned = 0.00276086 Jy ! Total flux subtracted in 200 components = 0.00276086 Jy ! Clean residual min=-0.002953 max=0.003022 Jy/beam ! Clean residual mean=-0.000002 rms=0.000765 Jy/beam ! Combined flux in latest and established models = 0.578961 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 60 components and 0.578961 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.671 mas, bmaj=15.91 mas, bpa=-1.017 degrees ! Estimated noise=1380.4 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000294497 Jy ! Component: 100 - total flux cleaned = -0.000955029 Jy ! Component: 150 - total flux cleaned = -0.00134411 Jy ! Component: 200 - total flux cleaned = -0.00158569 Jy ! Total flux subtracted in 200 components = -0.00158569 Jy ! Clean residual min=-0.002860 max=0.002251 Jy/beam ! Clean residual mean=-0.000005 rms=0.000711 Jy/beam ! Combined flux in latest and established models = 0.577375 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000223463 Jy ! Component: 100 - total flux cleaned = -0.000433993 Jy ! Component: 150 - total flux cleaned = -0.00058249 Jy ! Component: 200 - total flux cleaned = -0.000675066 Jy ! Total flux subtracted in 200 components = -0.000675066 Jy ! Clean residual min=-0.002732 max=0.002137 Jy/beam ! Clean residual mean=-0.000004 rms=0.000673 Jy/beam ! Combined flux in latest and established models = 0.5767 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 82 components and 0.5767 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.868 mas, bmaj=8.524 mas, bpa=4.189 degrees ! Estimated noise=1210.04 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000722528 Jy ! Component: 100 - total flux cleaned = 0.000642958 Jy ! Component: 150 - total flux cleaned = 0.000575948 Jy ! Component: 200 - total flux cleaned = 0.000450987 Jy ! Total flux subtracted in 200 components = 0.000450987 Jy ! Clean residual min=-0.002832 max=0.002519 Jy/beam ! Clean residual mean=-0.000001 rms=0.000647 Jy/beam ! Combined flux in latest and established models = 0.577151 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 102 components and 0.577151 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122689Jy sigma=0.000601 ! Fit after self-cal, rms=0.122681Jy sigma=0.000601 wmodel J1139-1552_S_2017_05_31_pus_map.mod ! Writing 102 model components to file: J1139-1552_S_2017_05_31_pus_map.mod wobs J1139-1552_S_2017_05_31_pus_uvs.fits ! Writing UV FITS file: J1139-1552_S_2017_05_31_pus_uvs.fits wwins J1139-1552_S_2017_05_31_pus_map.win ! wwins: Wrote 5 windows to J1139-1552_S_2017_05_31_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00072523 Jy ! Component: 100 - total flux cleaned = -0.00107982 Jy ! Component: 150 - total flux cleaned = -0.00153497 Jy ! Component: 200 - total flux cleaned = -0.00192829 Jy ! Component: 250 - total flux cleaned = -0.00234197 Jy ! Component: 300 - total flux cleaned = -0.00270669 Jy ! Component: 350 - total flux cleaned = -0.00302563 Jy ! Component: 400 - total flux cleaned = -0.00333603 Jy ! Component: 450 - total flux cleaned = -0.00360508 Jy ! Component: 500 - total flux cleaned = -0.00393271 Jy ! Component: 550 - total flux cleaned = -0.0041882 Jy ! Component: 600 - total flux cleaned = -0.0045014 Jy ! Component: 650 - total flux cleaned = -0.00480915 Jy ! Component: 700 - total flux cleaned = -0.00520111 Jy ! Component: 750 - total flux cleaned = -0.00543778 Jy ! Component: 800 - total flux cleaned = -0.00561282 Jy ! Component: 850 - total flux cleaned = -0.00581362 Jy ! Component: 900 - total flux cleaned = -0.00595432 Jy ! Component: 950 - total flux cleaned = -0.00606631 Jy ! Component: 1000 - total flux cleaned = -0.0062032 Jy ! Component: 1050 - total flux cleaned = -0.00628426 Jy ! Component: 1100 - total flux cleaned = -0.00631057 Jy ! Component: 1150 - total flux cleaned = -0.00628413 Jy ! Component: 1200 - total flux cleaned = -0.00636245 Jy ! Component: 1250 - total flux cleaned = -0.00628481 Jy ! Component: 1300 - total flux cleaned = -0.00625924 Jy ! Component: 1350 - total flux cleaned = -0.00628477 Jy ! Component: 1400 - total flux cleaned = -0.00633508 Jy ! Component: 1450 - total flux cleaned = -0.00633491 Jy ! Component: 1500 - total flux cleaned = -0.00633436 Jy ! Component: 1550 - total flux cleaned = -0.00623755 Jy ! Component: 1600 - total flux cleaned = -0.00616615 Jy ! Component: 1650 - total flux cleaned = -0.00614266 Jy ! Component: 1700 - total flux cleaned = -0.00607263 Jy ! Component: 1750 - total flux cleaned = -0.00600305 Jy ! Component: 1800 - total flux cleaned = -0.00595727 Jy ! Component: 1850 - total flux cleaned = -0.00584338 Jy ! Component: 1900 - total flux cleaned = -0.00577572 Jy ! Component: 1950 - total flux cleaned = -0.00573072 Jy ! Component: 2000 - total flux cleaned = -0.00570825 Jy ! Component: 2050 - total flux cleaned = -0.00562016 Jy ! Component: 2100 - total flux cleaned = -0.00559821 Jy ! Component: 2150 - total flux cleaned = -0.00555503 Jy ! Component: 2200 - total flux cleaned = -0.00555512 Jy ! Component: 2250 - total flux cleaned = -0.00544843 Jy ! Component: 2300 - total flux cleaned = -0.00542733 Jy ! Component: 2350 - total flux cleaned = -0.00534341 Jy ! Component: 2400 - total flux cleaned = -0.00532251 Jy ! Component: 2450 - total flux cleaned = -0.0053431 Jy ! Component: 2500 - total flux cleaned = -0.00530199 Jy ! Component: 2550 - total flux cleaned = -0.00528143 Jy ! Component: 2600 - total flux cleaned = -0.00524108 Jy ! Component: 2650 - total flux cleaned = -0.00520099 Jy ! Component: 2700 - total flux cleaned = -0.00518084 Jy ! Component: 2750 - total flux cleaned = -0.00516109 Jy ! Component: 2800 - total flux cleaned = -0.00516114 Jy ! Component: 2850 - total flux cleaned = -0.0051223 Jy ! Component: 2900 - total flux cleaned = -0.00506415 Jy ! Component: 2950 - total flux cleaned = -0.00504487 Jy ! Component: 3000 - total flux cleaned = -0.00504467 Jy ! Component: 3050 - total flux cleaned = -0.00498807 Jy ! Component: 3100 - total flux cleaned = -0.00498803 Jy ! Component: 3150 - total flux cleaned = -0.00487582 Jy ! Component: 3200 - total flux cleaned = -0.00487598 Jy ! Component: 3250 - total flux cleaned = -0.00485752 Jy ! Component: 3300 - total flux cleaned = -0.00485739 Jy ! Component: 3350 - total flux cleaned = -0.00478433 Jy ! Component: 3400 - total flux cleaned = -0.00469376 Jy ! Component: 3450 - total flux cleaned = -0.00465783 Jy ! Component: 3500 - total flux cleaned = -0.00456841 Jy ! Component: 3550 - total flux cleaned = -0.00447937 Jy ! Component: 3600 - total flux cleaned = -0.00440867 Jy ! Component: 3650 - total flux cleaned = -0.00433838 Jy ! Component: 3700 - total flux cleaned = -0.00421593 Jy ! Component: 3750 - total flux cleaned = -0.00418113 Jy ! Component: 3800 - total flux cleaned = -0.00409461 Jy ! Component: 3850 - total flux cleaned = -0.00399125 Jy ! Component: 3900 - total flux cleaned = -0.00392268 Jy ! Component: 3950 - total flux cleaned = -0.00382032 Jy ! Component: 4000 - total flux cleaned = -0.00375254 Jy ! Component: 4050 - total flux cleaned = -0.00370198 Jy ! Total flux subtracted in 4096 components = -0.00360129 Jy ! Clean residual min=-0.001055 max=0.000976 Jy/beam ! Clean residual mean=0.000002 rms=0.000297 Jy/beam ! Combined flux in latest and established models = 0.57355 Jy keep ! Adding 240 model components to the UV plane model. ! The established model now contains 342 components and 0.573551 Jy ![Exited script file: muppet] wmap "J1139-1552_S_2017_05_31_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.868 x 8.524 at 4.189 degrees (North through East) ! Clean map min=-0.0027188 max=0.57016 Jy/beam ! Writing clean map to FITS file: J1139-1552_S_2017_05_31_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.570161 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000294475 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.154943 0.154943 0.309886 0.619771 1.23954 2.47908 4.95817 9.91634 19.8327 39.6654 79.3307 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.57 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.868 x 8.524 at 4.189 degrees (North through East) ! Clean map min=-0.0027188 max=0.57016 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1139-1552_S_2017_05_31_pus_uvs.log closed on Tue Feb 5 21:47:09 2019