! Started logfile: J1136-0330_S_2017_09_26_pus_uvs.log on Sat May 11 13:01:09 2019 obs J1136-0330_S_2017_09_26_pus_uva.fits ! Reading UV FITS file: J1136-0330_S_2017_09_26_pus_uva.fits ! AN table 1: 39 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.579772 visibilities/baseline/integration-bin. ! Found source: J1136-0330 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 674 lines of history. ! ! Reading 3256 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1136-0330_S_2017_09_26_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 83 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 83 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 83 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 199 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.721653Jy sigma=0.005732 ! Fit after self-cal, rms=0.704829Jy sigma=0.005603 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.652 mas, bmaj=22.23 mas, bpa=-18.52 degrees ! Estimated noise=2287.17 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.233554 Jy ! Component: 100 - total flux cleaned = 0.284485 Jy ! Total flux subtracted in 100 components = 0.284485 Jy ! Clean residual min=-0.009285 max=0.014217 Jy/beam ! Clean residual mean=0.000006 rms=0.002675 Jy/beam ! Combined flux in latest and established models = 0.284485 Jy ! Performing phase self-cal ! Adding 2 model components to the UV plane model. ! The established model now contains 2 components and 0.284485 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097007Jy sigma=0.000705 ! Fit after self-cal, rms=0.097001Jy sigma=0.000705 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.308 mas, bmaj=23.66 mas, bpa=-18.33 degrees ! Estimated noise=1726.8 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0167071 Jy ! Component: 100 - total flux cleaned = 0.0231523 Jy ! Component: 150 - total flux cleaned = 0.0246232 Jy ! Component: 200 - total flux cleaned = 0.0251155 Jy ! Total flux subtracted in 200 components = 0.0251155 Jy ! Clean residual min=-0.005385 max=0.005608 Jy/beam ! Clean residual mean=0.000002 rms=0.001470 Jy/beam ! Combined flux in latest and established models = 0.309601 Jy ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 48 components and 0.309601 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094590Jy sigma=0.000681 ! Fit after self-cal, rms=0.094628Jy sigma=0.000681 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.95 HN 0.96 KP 1.07 ! LA 1.03 MK 1.01 NL 0.92 OV 1.01 ! PT 1.01 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 1.01 KP 1.01 ! LA 0.98 MK 0.96 NL 1.07 OV 1.03 ! PT 0.97 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 0.96 KP 0.99 ! LA 0.97 MK 1.02 NL 1.02 OV 0.94 ! PT 0.94 ! ! ! Correcting IF 4. ! A total of 36 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.90 HN 1.01 KP 1.00* ! LA 1.03 MK 1.20 NL 1.00* OV 2.53 ! PT 0.99 ! ! ! Fit before self-cal, rms=0.094628Jy sigma=0.000681 ! Fit after self-cal, rms=0.103799Jy sigma=0.000655 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.31 mas, bmaj=23.69 mas, bpa=-18.24 degrees ! Estimated noise=1726.5 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00100175 Jy ! Component: 100 - total flux cleaned = -0.000997418 Jy ! Component: 150 - total flux cleaned = -0.000950258 Jy ! Component: 200 - total flux cleaned = -0.000832944 Jy ! Total flux subtracted in 200 components = -0.000832944 Jy ! Clean residual min=-0.004420 max=0.004531 Jy/beam ! Clean residual mean=-0.000001 rms=0.001094 Jy/beam ! Combined flux in latest and established models = 0.308768 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 64 components and 0.308768 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103719Jy sigma=0.000654 ! Fit after self-cal, rms=0.104272Jy sigma=0.000654 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104272Jy sigma=0.000654 ! Fit after self-cal, rms=0.107869Jy sigma=0.000647 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.31 mas, bmaj=23.7 mas, bpa=-18.26 degrees ! Estimated noise=1727.2 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.07589e-05 Jy ! Component: 100 - total flux cleaned = 2.16776e-05 Jy ! Component: 150 - total flux cleaned = -5.5932e-05 Jy ! Component: 200 - total flux cleaned = -0.000103087 Jy ! Total flux subtracted in 200 components = -0.000103087 Jy ! Clean residual min=-0.004420 max=0.003182 Jy/beam ! Clean residual mean=-0.000001 rms=0.000848 Jy/beam ! Combined flux in latest and established models = 0.308665 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 85 components and 0.308665 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107850Jy sigma=0.000647 ! Fit after self-cal, rms=0.107930Jy sigma=0.000647 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000138882 Jy ! Component: 100 - total flux cleaned = -0.000181892 Jy ! Component: 150 - total flux cleaned = -0.000203101 Jy ! Component: 200 - total flux cleaned = -0.000242781 Jy ! Total flux subtracted in 200 components = -0.000242781 Jy ! Clean residual min=-0.004373 max=0.003178 Jy/beam ! Clean residual mean=-0.000001 rms=0.000841 Jy/beam ! Combined flux in latest and established models = 0.308422 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 103 components and 0.308422 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107923Jy sigma=0.000647 ! Fit after self-cal, rms=0.107922Jy sigma=0.000647 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107922Jy sigma=0.000647 ! Fit after self-cal, rms=0.107741Jy sigma=0.000644 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.308 mas, bmaj=23.71 mas, bpa=-18.26 degrees ! Estimated noise=1726.81 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.68141e-05 Jy ! Component: 100 - total flux cleaned = -9.70676e-05 Jy ! Component: 150 - total flux cleaned = -9.6224e-05 Jy ! Component: 200 - total flux cleaned = -0.000115665 Jy ! Total flux subtracted in 200 components = -0.000115665 Jy ! Clean residual min=-0.003974 max=0.002887 Jy/beam ! Clean residual mean=-0.000002 rms=0.000802 Jy/beam ! Combined flux in latest and established models = 0.308306 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 117 components and 0.308306 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107734Jy sigma=0.000644 ! Fit after self-cal, rms=0.107739Jy sigma=0.000644 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000109105 Jy ! Component: 100 - total flux cleaned = -0.000108857 Jy ! Component: 150 - total flux cleaned = -0.000126187 Jy ! Component: 200 - total flux cleaned = -0.000143003 Jy ! Total flux subtracted in 200 components = -0.000143003 Jy ! Clean residual min=-0.003963 max=0.002885 Jy/beam ! Clean residual mean=-0.000002 rms=0.000799 Jy/beam ! Combined flux in latest and established models = 0.308163 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 125 components and 0.308164 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107733Jy sigma=0.000644 ! Fit after self-cal, rms=0.107733Jy sigma=0.000644 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107733Jy sigma=0.000644 ! Fit after self-cal, rms=0.107687Jy sigma=0.000644 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.318 mas, bmaj=25.01 mas, bpa=-14.96 degrees ! Estimated noise=2091.41 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00033041 Jy ! Component: 100 - total flux cleaned = -0.000506037 Jy ! Component: 150 - total flux cleaned = -0.000655858 Jy ! Component: 200 - total flux cleaned = -0.000766157 Jy ! Total flux subtracted in 200 components = -0.000766157 Jy ! Clean residual min=-0.003262 max=0.003213 Jy/beam ! Clean residual mean=-0.000004 rms=0.000945 Jy/beam ! Combined flux in latest and established models = 0.307397 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 142 components and 0.307397 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107687Jy sigma=0.000643 ! Fit after self-cal, rms=0.107692Jy sigma=0.000643 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000186708 Jy ! Component: 100 - total flux cleaned = -0.000287108 Jy ! Component: 150 - total flux cleaned = -0.000376687 Jy ! Component: 200 - total flux cleaned = -0.000431057 Jy ! Total flux subtracted in 200 components = -0.000431057 Jy ! Clean residual min=-0.003185 max=0.003231 Jy/beam ! Clean residual mean=-0.000004 rms=0.000937 Jy/beam ! Combined flux in latest and established models = 0.306966 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 148 components and 0.306966 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107686Jy sigma=0.000643 ! Fit after self-cal, rms=0.107691Jy sigma=0.000643 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.307 mas, bmaj=23.71 mas, bpa=-18.26 degrees ! Estimated noise=1726.51 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.307 x 23.71 at -18.26 degrees (North through East) ! Clean map min=-0.0037379 max=0.30321 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.658 mas, bmaj=22.39 mas, bpa=-18.52 degrees ! Estimated noise=2292.3 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.234627 Jy ! Component: 100 - total flux cleaned = 0.285793 Jy ! Component: 150 - total flux cleaned = 0.298494 Jy ! Component: 200 - total flux cleaned = 0.304093 Jy ! Total flux subtracted in 200 components = 0.304093 Jy ! Clean residual min=-0.005309 max=0.004660 Jy/beam ! Clean residual mean=0.000001 rms=0.001231 Jy/beam ! Combined flux in latest and established models = 0.304093 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.304093 Jy ! Inverting map and beam ! Estimated beam: bmin=3.307 mas, bmaj=23.71 mas, bpa=-18.26 degrees ! Estimated noise=1726.51 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00304286 Jy ! Component: 100 - total flux cleaned = 0.00406436 Jy ! Component: 150 - total flux cleaned = 0.00424267 Jy ! Component: 200 - total flux cleaned = 0.00404358 Jy ! Total flux subtracted in 200 components = 0.00404358 Jy ! Clean residual min=-0.004084 max=0.003159 Jy/beam ! Clean residual mean=-0.000003 rms=0.000841 Jy/beam ! Combined flux in latest and established models = 0.308136 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 54 components and 0.308136 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.318 mas, bmaj=25.01 mas, bpa=-14.96 degrees ! Estimated noise=2091.41 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000525246 Jy ! Component: 100 - total flux cleaned = 0.000400876 Jy ! Component: 150 - total flux cleaned = 0.000240529 Jy ! Component: 200 - total flux cleaned = 4.6237e-05 Jy ! Total flux subtracted in 200 components = 4.6237e-05 Jy ! Clean residual min=-0.003442 max=0.003224 Jy/beam ! Clean residual mean=-0.000004 rms=0.000972 Jy/beam ! Combined flux in latest and established models = 0.308183 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000175218 Jy ! Component: 100 - total flux cleaned = -0.000334011 Jy ! Component: 150 - total flux cleaned = -0.000480361 Jy ! Component: 200 - total flux cleaned = -0.000613347 Jy ! Total flux subtracted in 200 components = -0.000613347 Jy ! Clean residual min=-0.003321 max=0.003221 Jy/beam ! Clean residual mean=-0.000004 rms=0.000954 Jy/beam ! Combined flux in latest and established models = 0.307569 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 96 components and 0.307569 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.307 mas, bmaj=23.71 mas, bpa=-18.26 degrees ! Estimated noise=1726.51 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000180793 Jy ! Component: 100 - total flux cleaned = -0.000180194 Jy ! Component: 150 - total flux cleaned = -0.000115981 Jy ! Component: 200 - total flux cleaned = -5.74616e-05 Jy ! Total flux subtracted in 200 components = -5.74616e-05 Jy ! Clean residual min=-0.003915 max=0.002950 Jy/beam ! Clean residual mean=-0.000003 rms=0.000800 Jy/beam ! Combined flux in latest and established models = 0.307512 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 114 components and 0.307512 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107710Jy sigma=0.000644 ! Fit after self-cal, rms=0.107704Jy sigma=0.000644 wmodel J1136-0330_S_2017_09_26_pus_map.mod ! Writing 114 model components to file: J1136-0330_S_2017_09_26_pus_map.mod wobs J1136-0330_S_2017_09_26_pus_uvs.fits ! Writing UV FITS file: J1136-0330_S_2017_09_26_pus_uvs.fits wwins J1136-0330_S_2017_09_26_pus_map.win ! wwins: Wrote 1 windows to J1136-0330_S_2017_09_26_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00166556 Jy ! Component: 100 - total flux cleaned = -0.00249203 Jy ! Component: 150 - total flux cleaned = -0.00279453 Jy ! Component: 200 - total flux cleaned = -0.0030769 Jy ! Component: 250 - total flux cleaned = -0.00325683 Jy ! Component: 300 - total flux cleaned = -0.00330046 Jy ! Component: 350 - total flux cleaned = -0.00330034 Jy ! Component: 400 - total flux cleaned = -0.00325947 Jy ! Component: 450 - total flux cleaned = -0.0031813 Jy ! Component: 500 - total flux cleaned = -0.00310586 Jy ! Component: 550 - total flux cleaned = -0.00314266 Jy ! Component: 600 - total flux cleaned = -0.00314252 Jy ! Component: 650 - total flux cleaned = -0.00317681 Jy ! Component: 700 - total flux cleaned = -0.00324482 Jy ! Component: 750 - total flux cleaned = -0.00327804 Jy ! Component: 800 - total flux cleaned = -0.00334333 Jy ! Component: 850 - total flux cleaned = -0.00327909 Jy ! Component: 900 - total flux cleaned = -0.00327914 Jy ! Component: 950 - total flux cleaned = -0.00340312 Jy ! Component: 1000 - total flux cleaned = -0.00340252 Jy ! Component: 1050 - total flux cleaned = -0.00334174 Jy ! Component: 1100 - total flux cleaned = -0.0033421 Jy ! Component: 1150 - total flux cleaned = -0.00328294 Jy ! Component: 1200 - total flux cleaned = -0.00322524 Jy ! Component: 1250 - total flux cleaned = -0.00319677 Jy ! Component: 1300 - total flux cleaned = -0.00316842 Jy ! Component: 1350 - total flux cleaned = -0.00305706 Jy ! Component: 1400 - total flux cleaned = -0.00300237 Jy ! Component: 1450 - total flux cleaned = -0.00292123 Jy ! Component: 1500 - total flux cleaned = -0.00292141 Jy ! Component: 1550 - total flux cleaned = -0.00294789 Jy ! Component: 1600 - total flux cleaned = -0.0030268 Jy ! Component: 1650 - total flux cleaned = -0.00302672 Jy ! Component: 1700 - total flux cleaned = -0.00310416 Jy ! Component: 1750 - total flux cleaned = -0.00310393 Jy ! Component: 1800 - total flux cleaned = -0.0031294 Jy ! Component: 1850 - total flux cleaned = -0.00312933 Jy ! Component: 1900 - total flux cleaned = -0.00317943 Jy ! Component: 1950 - total flux cleaned = -0.00332772 Jy ! Component: 2000 - total flux cleaned = -0.00337664 Jy ! Component: 2050 - total flux cleaned = -0.00335219 Jy ! Component: 2100 - total flux cleaned = -0.00340052 Jy ! Component: 2150 - total flux cleaned = -0.00340063 Jy ! Component: 2200 - total flux cleaned = -0.00342441 Jy ! Component: 2250 - total flux cleaned = -0.00351875 Jy ! Component: 2300 - total flux cleaned = -0.00344871 Jy ! Component: 2350 - total flux cleaned = -0.00347203 Jy ! Component: 2400 - total flux cleaned = -0.00342618 Jy ! Component: 2450 - total flux cleaned = -0.00340352 Jy ! Component: 2500 - total flux cleaned = -0.00342627 Jy ! Component: 2550 - total flux cleaned = -0.00340379 Jy ! Component: 2600 - total flux cleaned = -0.00331407 Jy ! Component: 2650 - total flux cleaned = -0.0032695 Jy ! Component: 2700 - total flux cleaned = -0.00322493 Jy ! Component: 2750 - total flux cleaned = -0.00320283 Jy ! Component: 2800 - total flux cleaned = -0.00313704 Jy ! Component: 2850 - total flux cleaned = -0.00309369 Jy ! Component: 2900 - total flux cleaned = -0.00305012 Jy ! Component: 2950 - total flux cleaned = -0.00302863 Jy ! Component: 3000 - total flux cleaned = -0.00302863 Jy ! Component: 3050 - total flux cleaned = -0.00300704 Jy ! Component: 3100 - total flux cleaned = -0.00296463 Jy ! Component: 3150 - total flux cleaned = -0.00296465 Jy ! Component: 3200 - total flux cleaned = -0.00296463 Jy ! Component: 3250 - total flux cleaned = -0.00296448 Jy ! Component: 3300 - total flux cleaned = -0.00296446 Jy ! Component: 3350 - total flux cleaned = -0.00296435 Jy ! Component: 3400 - total flux cleaned = -0.00292335 Jy ! Component: 3450 - total flux cleaned = -0.00298462 Jy ! Component: 3500 - total flux cleaned = -0.00298472 Jy ! Component: 3550 - total flux cleaned = -0.00302511 Jy ! Component: 3600 - total flux cleaned = -0.00304529 Jy ! Component: 3650 - total flux cleaned = -0.00316515 Jy ! Component: 3700 - total flux cleaned = -0.00310523 Jy ! Component: 3750 - total flux cleaned = -0.00314485 Jy ! Component: 3800 - total flux cleaned = -0.00314479 Jy ! Component: 3850 - total flux cleaned = -0.00316456 Jy ! Component: 3900 - total flux cleaned = -0.00314497 Jy ! Component: 3950 - total flux cleaned = -0.00320345 Jy ! Component: 4000 - total flux cleaned = -0.00314525 Jy ! Component: 4050 - total flux cleaned = -0.00316456 Jy ! Total flux subtracted in 4096 components = -0.00312611 Jy ! Clean residual min=-0.001110 max=0.001265 Jy/beam ! Clean residual mean=-0.000002 rms=0.000382 Jy/beam ! Combined flux in latest and established models = 0.304386 Jy keep ! Adding 269 model components to the UV plane model. ! The established model now contains 383 components and 0.304386 Jy ![Exited script file: muppet] wmap "J1136-0330_S_2017_09_26_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.307 x 23.71 at -18.26 degrees (North through East) ! Clean map min=-0.003643 max=0.3032 Jy/beam ! Writing clean map to FITS file: J1136-0330_S_2017_09_26_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.303196 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00037784 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.373858 0.373858 0.747716 1.49543 2.99086 5.98173 11.9635 23.9269 47.8538 95.7076 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.303 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.307 x 23.71 at -18.26 degrees (North through East) ! Clean map min=-0.003643 max=0.3032 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1136-0330_S_2017_09_26_pus_uvs.log closed on Sat May 11 13:01:14 2019