! Started logfile: J1136-0330_S_2017_07_16_pus_uvs.log on Thu May 9 11:08:10 2019 obs J1136-0330_S_2017_07_16_pus_uva.fits ! Reading UV FITS file: J1136-0330_S_2017_07_16_pus_uva.fits ! AN table 1: 20 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.726667 visibilities/baseline/integration-bin. ! Found source: J1136-0330 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 815 lines of history. ! ! Reading 2616 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1136-0330_S_2017_07_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 131 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.728590Jy sigma=0.006092 ! Fit after self-cal, rms=0.721661Jy sigma=0.006035 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.463 mas, bmaj=6.456 mas, bpa=-2.725 degrees ! Estimated noise=2242.57 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.22093 Jy ! Component: 100 - total flux cleaned = 0.269108 Jy ! Total flux subtracted in 100 components = 0.269108 Jy ! Clean residual min=-0.011922 max=0.015333 Jy/beam ! Clean residual mean=0.000015 rms=0.002898 Jy/beam ! Combined flux in latest and established models = 0.269108 Jy ! Performing phase self-cal ! Adding 2 model components to the UV plane model. ! The established model now contains 2 components and 0.269108 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094690Jy sigma=0.000749 ! Fit after self-cal, rms=0.094689Jy sigma=0.000749 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.916 mas, bmaj=7.289 mas, bpa=-2.398 degrees ! Estimated noise=1889.43 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (18, -38.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0132786 Jy ! Component: 100 - total flux cleaned = 0.0153217 Jy ! Component: 150 - total flux cleaned = 0.0160626 Jy ! Component: 200 - total flux cleaned = 0.016656 Jy ! Total flux subtracted in 200 components = 0.016656 Jy ! Clean residual min=-0.010569 max=0.011325 Jy/beam ! Clean residual mean=0.000012 rms=0.002447 Jy/beam ! Combined flux in latest and established models = 0.285764 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 19 components and 0.285764 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091654Jy sigma=0.000726 ! Fit after self-cal, rms=0.091491Jy sigma=0.000725 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 1.00* HN 0.98 KP 1.02 ! LA 1.00 MK 1.02 NL 0.87 OV 0.97 ! PT 1.00 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00* HN 0.96 KP 1.12 ! LA 0.92 MK 1.01 NL 1.05 OV 0.98 ! PT 1.05 SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00* HN 0.97 KP 1.07 ! LA 0.93 MK 1.02 NL 1.02 OV 0.89 ! PT 1.01 SC 0.95 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.21 KP 1.00* ! LA 0.84 MK 0.97 NL 1.00* OV 1.00* ! PT 1.04 SC 1.00* ! ! ! Fit before self-cal, rms=0.091491Jy sigma=0.000725 ! Fit after self-cal, rms=0.088378Jy sigma=0.000697 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.911 mas, bmaj=7.271 mas, bpa=-1.883 degrees ! Estimated noise=1873.14 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000880248 Jy ! Component: 100 - total flux cleaned = -0.00167616 Jy ! Component: 150 - total flux cleaned = -0.0022758 Jy ! Component: 200 - total flux cleaned = -0.00272215 Jy ! Total flux subtracted in 200 components = -0.00272215 Jy ! Clean residual min=-0.008316 max=0.008343 Jy/beam ! Clean residual mean=-0.000001 rms=0.001915 Jy/beam ! Combined flux in latest and established models = 0.283042 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 38 components and 0.283041 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088049Jy sigma=0.000695 ! Fit after self-cal, rms=0.088055Jy sigma=0.000695 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088055Jy sigma=0.000695 ! Fit after self-cal, rms=0.084379Jy sigma=0.000661 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.909 mas, bmaj=7.279 mas, bpa=-1.963 degrees ! Estimated noise=1881.72 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00185325 Jy ! Component: 100 - total flux cleaned = -0.00198841 Jy ! Component: 150 - total flux cleaned = -0.00215934 Jy ! Component: 200 - total flux cleaned = -0.0022085 Jy ! Total flux subtracted in 200 components = -0.0022085 Jy ! Clean residual min=-0.005783 max=0.004778 Jy/beam ! Clean residual mean=-0.000002 rms=0.001184 Jy/beam ! Combined flux in latest and established models = 0.280833 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 61 components and 0.280833 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084295Jy sigma=0.000660 ! Fit after self-cal, rms=0.084351Jy sigma=0.000660 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000543752 Jy ! Component: 100 - total flux cleaned = -0.000585295 Jy ! Component: 150 - total flux cleaned = -0.000621966 Jy ! Component: 200 - total flux cleaned = -0.0006234 Jy ! Total flux subtracted in 200 components = -0.0006234 Jy ! Clean residual min=-0.005752 max=0.004767 Jy/beam ! Clean residual mean=-0.000001 rms=0.001174 Jy/beam ! Combined flux in latest and established models = 0.28021 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 65 components and 0.28021 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084321Jy sigma=0.000660 ! Fit after self-cal, rms=0.084318Jy sigma=0.000660 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084318Jy sigma=0.000660 ! Fit after self-cal, rms=0.084503Jy sigma=0.000659 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.908 mas, bmaj=7.275 mas, bpa=-1.921 degrees ! Estimated noise=1880.08 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00055657 Jy ! Component: 100 - total flux cleaned = -0.000508779 Jy ! Component: 150 - total flux cleaned = -0.000435309 Jy ! Component: 200 - total flux cleaned = -0.000371324 Jy ! Total flux subtracted in 200 components = -0.000371324 Jy ! Clean residual min=-0.005753 max=0.004389 Jy/beam ! Clean residual mean=-0.000002 rms=0.001128 Jy/beam ! Combined flux in latest and established models = 0.279838 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 77 components and 0.279838 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084463Jy sigma=0.000658 ! Fit after self-cal, rms=0.084476Jy sigma=0.000658 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000262459 Jy ! Component: 100 - total flux cleaned = -0.000231569 Jy ! Component: 150 - total flux cleaned = -0.000178218 Jy ! Component: 200 - total flux cleaned = -0.000104305 Jy ! Total flux subtracted in 200 components = -0.000104305 Jy ! Clean residual min=-0.005714 max=0.004346 Jy/beam ! Clean residual mean=-0.000002 rms=0.001123 Jy/beam ! Combined flux in latest and established models = 0.279734 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 82 components and 0.279734 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084459Jy sigma=0.000658 ! Fit after self-cal, rms=0.084459Jy sigma=0.000658 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084459Jy sigma=0.000658 ! Fit after self-cal, rms=0.084429Jy sigma=0.000658 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.046 mas, bmaj=12.99 mas, bpa=1.086 degrees ! Estimated noise=2500.71 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.4046e-05 Jy ! Component: 100 - total flux cleaned = 0.000146376 Jy ! Component: 150 - total flux cleaned = 0.000306078 Jy ! Component: 200 - total flux cleaned = 0.00030561 Jy ! Total flux subtracted in 200 components = 0.00030561 Jy ! Clean residual min=-0.006655 max=0.005554 Jy/beam ! Clean residual mean=-0.000007 rms=0.001560 Jy/beam ! Combined flux in latest and established models = 0.28004 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 94 components and 0.28004 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084429Jy sigma=0.000658 ! Fit after self-cal, rms=0.084427Jy sigma=0.000657 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.47869e-05 Jy ! Component: 100 - total flux cleaned = -0.000119029 Jy ! Component: 150 - total flux cleaned = -7.14249e-05 Jy ! Component: 200 - total flux cleaned = -7.11364e-05 Jy ! Total flux subtracted in 200 components = -7.11364e-05 Jy ! Clean residual min=-0.006621 max=0.005597 Jy/beam ! Clean residual mean=-0.000007 rms=0.001553 Jy/beam ! Combined flux in latest and established models = 0.279968 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 106 components and 0.279968 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084439Jy sigma=0.000658 ! Fit after self-cal, rms=0.084438Jy sigma=0.000658 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.907 mas, bmaj=7.271 mas, bpa=-1.885 degrees ! Estimated noise=1878.47 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.907 x 7.271 at -1.885 degrees (North through East) ! Clean map min=-0.0057724 max=0.27796 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.453 mas, bmaj=6.422 mas, bpa=-2.232 degrees ! Estimated noise=2231.48 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.219176 Jy ! Component: 100 - total flux cleaned = 0.266971 Jy ! Component: 150 - total flux cleaned = 0.278547 Jy ! Component: 200 - total flux cleaned = 0.280975 Jy ! Total flux subtracted in 200 components = 0.280975 Jy ! Clean residual min=-0.005695 max=0.005936 Jy/beam ! Clean residual mean=0.000000 rms=0.001357 Jy/beam ! Combined flux in latest and established models = 0.280975 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.280975 Jy ! Inverting map and beam ! Estimated beam: bmin=2.907 mas, bmaj=7.271 mas, bpa=-1.885 degrees ! Estimated noise=1878.47 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00109315 Jy ! Component: 100 - total flux cleaned = 0.000982398 Jy ! Component: 150 - total flux cleaned = 0.000891488 Jy ! Component: 200 - total flux cleaned = 0.000899454 Jy ! Total flux subtracted in 200 components = 0.000899454 Jy ! Clean residual min=-0.005723 max=0.004564 Jy/beam ! Clean residual mean=-0.000003 rms=0.001148 Jy/beam ! Combined flux in latest and established models = 0.281875 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 27 components and 0.281875 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.046 mas, bmaj=12.99 mas, bpa=1.086 degrees ! Estimated noise=2500.71 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000391532 Jy ! Component: 100 - total flux cleaned = -0.000724546 Jy ! Component: 150 - total flux cleaned = -0.000893264 Jy ! Component: 200 - total flux cleaned = -0.00109048 Jy ! Total flux subtracted in 200 components = -0.00109048 Jy ! Clean residual min=-0.006678 max=0.005683 Jy/beam ! Clean residual mean=-0.000008 rms=0.001571 Jy/beam ! Combined flux in latest and established models = 0.280784 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000128477 Jy ! Component: 100 - total flux cleaned = -0.00024332 Jy ! Component: 150 - total flux cleaned = -0.000313907 Jy ! Component: 200 - total flux cleaned = -0.00037812 Jy ! Total flux subtracted in 200 components = -0.00037812 Jy ! Clean residual min=-0.006614 max=0.005725 Jy/beam ! Clean residual mean=-0.000007 rms=0.001556 Jy/beam ! Combined flux in latest and established models = 0.280406 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 43 components and 0.280406 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.907 mas, bmaj=7.271 mas, bpa=-1.885 degrees ! Estimated noise=1878.47 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000263953 Jy ! Component: 100 - total flux cleaned = 0.000396823 Jy ! Component: 150 - total flux cleaned = 0.000501819 Jy ! Component: 200 - total flux cleaned = 0.000502742 Jy ! Total flux subtracted in 200 components = 0.000502742 Jy ! Clean residual min=-0.005684 max=0.004438 Jy/beam ! Clean residual mean=-0.000002 rms=0.001117 Jy/beam ! Combined flux in latest and established models = 0.280909 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 64 components and 0.280909 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084494Jy sigma=0.000658 ! Fit after self-cal, rms=0.084487Jy sigma=0.000658 wmodel J1136-0330_S_2017_07_16_pus_map.mod ! Writing 64 model components to file: J1136-0330_S_2017_07_16_pus_map.mod wobs J1136-0330_S_2017_07_16_pus_uvs.fits ! Writing UV FITS file: J1136-0330_S_2017_07_16_pus_uvs.fits wwins J1136-0330_S_2017_07_16_pus_map.win ! wwins: Wrote 2 windows to J1136-0330_S_2017_07_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00137776 Jy ! Component: 100 - total flux cleaned = -0.000997002 Jy ! Component: 150 - total flux cleaned = -0.000572635 Jy ! Component: 200 - total flux cleaned = -0.000440431 Jy ! Component: 250 - total flux cleaned = -0.000248217 Jy ! Component: 300 - total flux cleaned = -0.000248612 Jy ! Component: 350 - total flux cleaned = -0.000424715 Jy ! Component: 400 - total flux cleaned = -8.2324e-05 Jy ! Component: 450 - total flux cleaned = 0.000194847 Jy ! Component: 500 - total flux cleaned = 0.000411284 Jy ! Component: 550 - total flux cleaned = 0.000729031 Jy ! Component: 600 - total flux cleaned = 0.00103972 Jy ! Component: 650 - total flux cleaned = 0.00114101 Jy ! Component: 700 - total flux cleaned = 0.00124142 Jy ! Component: 750 - total flux cleaned = 0.00129149 Jy ! Component: 800 - total flux cleaned = 0.00143525 Jy ! Component: 850 - total flux cleaned = 0.00157515 Jy ! Component: 900 - total flux cleaned = 0.00157611 Jy ! Component: 950 - total flux cleaned = 0.00180254 Jy ! Component: 1000 - total flux cleaned = 0.00197963 Jy ! Component: 1050 - total flux cleaned = 0.00193514 Jy ! Component: 1100 - total flux cleaned = 0.00202177 Jy ! Component: 1150 - total flux cleaned = 0.0020225 Jy ! Component: 1200 - total flux cleaned = 0.00198096 Jy ! Component: 1250 - total flux cleaned = 0.0020226 Jy ! Component: 1300 - total flux cleaned = 0.00198268 Jy ! Component: 1350 - total flux cleaned = 0.00198342 Jy ! Component: 1400 - total flux cleaned = 0.00206143 Jy ! Component: 1450 - total flux cleaned = 0.00206103 Jy ! Component: 1500 - total flux cleaned = 0.0019843 Jy ! Component: 1550 - total flux cleaned = 0.00194674 Jy ! Component: 1600 - total flux cleaned = 0.00194712 Jy ! Component: 1650 - total flux cleaned = 0.00191002 Jy ! Component: 1700 - total flux cleaned = 0.00180103 Jy ! Component: 1750 - total flux cleaned = 0.00172864 Jy ! Component: 1800 - total flux cleaned = 0.0016574 Jy ! Component: 1850 - total flux cleaned = 0.00151645 Jy ! Component: 1900 - total flux cleaned = 0.00130674 Jy ! Component: 1950 - total flux cleaned = 0.00127208 Jy ! Component: 2000 - total flux cleaned = 0.00103314 Jy ! Component: 2050 - total flux cleaned = 0.000831495 Jy ! Component: 2100 - total flux cleaned = 0.000831765 Jy ! Component: 2150 - total flux cleaned = 0.000666836 Jy ! Component: 2200 - total flux cleaned = 0.000634337 Jy ! Component: 2250 - total flux cleaned = 0.000472263 Jy ! Component: 2300 - total flux cleaned = 0.000440327 Jy ! Component: 2350 - total flux cleaned = 0.000282127 Jy ! Component: 2400 - total flux cleaned = 0.000313598 Jy ! Component: 2450 - total flux cleaned = 0.000251213 Jy ! Component: 2500 - total flux cleaned = 0.000219908 Jy ! Component: 2550 - total flux cleaned = 6.74965e-05 Jy ! Component: 2600 - total flux cleaned = 9.79051e-05 Jy ! Component: 2650 - total flux cleaned = 0.000187811 Jy ! Component: 2700 - total flux cleaned = 9.86889e-05 Jy ! Component: 2750 - total flux cleaned = 0.000216495 Jy ! Component: 2800 - total flux cleaned = 0.000216226 Jy ! Component: 2850 - total flux cleaned = 0.000274064 Jy ! Component: 2900 - total flux cleaned = 0.000359966 Jy ! Component: 2950 - total flux cleaned = 0.000416267 Jy ! Component: 3000 - total flux cleaned = 0.000275201 Jy ! Component: 3050 - total flux cleaned = 0.000415376 Jy ! Component: 3100 - total flux cleaned = 0.00041554 Jy ! Component: 3150 - total flux cleaned = 0.000443098 Jy ! Component: 3200 - total flux cleaned = 0.000552562 Jy ! Component: 3250 - total flux cleaned = 0.000389809 Jy ! Component: 3300 - total flux cleaned = 0.000524415 Jy ! Component: 3350 - total flux cleaned = 0.000524615 Jy ! Component: 3400 - total flux cleaned = 0.000630438 Jy ! Component: 3450 - total flux cleaned = 0.000604168 Jy ! Component: 3500 - total flux cleaned = 0.000578194 Jy ! Component: 3550 - total flux cleaned = 0.000656043 Jy ! Component: 3600 - total flux cleaned = 0.000604411 Jy ! Component: 3650 - total flux cleaned = 0.00070685 Jy ! Component: 3700 - total flux cleaned = 0.000808478 Jy ! Component: 3750 - total flux cleaned = 0.000758237 Jy ! Component: 3800 - total flux cleaned = 0.0008086 Jy ! Component: 3850 - total flux cleaned = 0.00088338 Jy ! Component: 3900 - total flux cleaned = 0.00100656 Jy ! Component: 3950 - total flux cleaned = 0.000957525 Jy ! Component: 4000 - total flux cleaned = 0.00100657 Jy ! Component: 4050 - total flux cleaned = 0.00100656 Jy ! Total flux subtracted in 4096 components = 0.00107879 Jy ! Clean residual min=-0.001395 max=0.001524 Jy/beam ! Clean residual mean=-0.000001 rms=0.000432 Jy/beam ! Combined flux in latest and established models = 0.281988 Jy keep ! Adding 286 model components to the UV plane model. ! The established model now contains 350 components and 0.281988 Jy ![Exited script file: muppet] wmap "J1136-0330_S_2017_07_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.907 x 7.271 at -1.885 degrees (North through East) ! Clean map min=-0.0054508 max=0.27865 Jy/beam ! Writing clean map to FITS file: J1136-0330_S_2017_07_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.27865 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000421258 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.453535 0.453535 0.90707 1.81414 3.62828 7.25656 14.5131 29.0262 58.0525 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.278 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.907 x 7.271 at -1.885 degrees (North through East) ! Clean map min=-0.0054508 max=0.27865 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1136-0330_S_2017_07_16_pus_uvs.log closed on Thu May 9 11:08:14 2019