! Started logfile: J1136-0330_S_2017_06_15_pus_uvs.log on Tue May 7 15:17:38 2019 obs J1136-0330_S_2017_06_15_pus_uva.fits ! Reading UV FITS file: J1136-0330_S_2017_06_15_pus_uva.fits ! AN table 1: 8 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.830556 visibilities/baseline/integration-bin. ! Found source: J1136-0330 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 603 lines of history. ! ! Reading 1196 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1136-0330_S_2017_06_15_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 57 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.707504Jy sigma=0.006148 ! Fit after self-cal, rms=0.698077Jy sigma=0.006077 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.702 mas, bmaj=6.928 mas, bpa=-2.471 degrees ! Estimated noise=3132.48 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.240179 Jy ! Component: 100 - total flux cleaned = 0.29258 Jy ! Total flux subtracted in 100 components = 0.29258 Jy ! Clean residual min=-0.013792 max=0.022996 Jy/beam ! Clean residual mean=-0.000021 rms=0.004131 Jy/beam ! Combined flux in latest and established models = 0.29258 Jy ! Performing phase self-cal ! Adding 2 model components to the UV plane model. ! The established model now contains 2 components and 0.29258 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097016Jy sigma=0.000797 ! Fit after self-cal, rms=0.097014Jy sigma=0.000797 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.176 mas, bmaj=7.722 mas, bpa=-1.501 degrees ! Estimated noise=2713.15 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2.5, 9). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0198049 Jy ! Component: 100 - total flux cleaned = 0.025784 Jy ! Component: 150 - total flux cleaned = 0.0284798 Jy ! Component: 200 - total flux cleaned = 0.0294449 Jy ! Total flux subtracted in 200 components = 0.0294449 Jy ! Clean residual min=-0.009008 max=0.011905 Jy/beam ! Clean residual mean=0.000004 rms=0.002745 Jy/beam ! Combined flux in latest and established models = 0.322025 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 18 components and 0.322025 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092842Jy sigma=0.000756 ! Fit after self-cal, rms=0.092691Jy sigma=0.000754 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.78 FD 0.93 HN 0.92 KP 1.04 ! LA 1.07 MK 1.00 NL 0.92 OV 0.98 ! PT 1.02 SC 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.58 FD 0.97 HN 1.01 KP 0.95 ! LA 0.97 MK 1.01 NL 1.02 OV 1.03 ! PT 0.98 SC 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 0.99 HN 0.95 KP 0.99 ! LA 0.97 MK 1.05 NL 1.06 OV 0.91 ! PT 0.97 SC 0.96 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.11 HN 0.99 KP 1.00* ! LA 1.00* MK 1.06 NL 1.00* OV 1.00* ! PT 1.01 SC 1.00* ! ! ! Fit before self-cal, rms=0.092691Jy sigma=0.000754 ! Fit after self-cal, rms=0.082911Jy sigma=0.000679 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.18 mas, bmaj=7.758 mas, bpa=-1.024 degrees ! Estimated noise=2715.33 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000195547 Jy ! Component: 100 - total flux cleaned = 0.000686688 Jy ! Component: 150 - total flux cleaned = 0.0010813 Jy ! Component: 200 - total flux cleaned = 0.00143219 Jy ! Total flux subtracted in 200 components = 0.00143219 Jy ! Clean residual min=-0.007117 max=0.006590 Jy/beam ! Clean residual mean=0.000006 rms=0.001733 Jy/beam ! Combined flux in latest and established models = 0.323457 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 37 components and 0.323457 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082589Jy sigma=0.000676 ! Fit after self-cal, rms=0.082634Jy sigma=0.000676 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082634Jy sigma=0.000676 ! Fit after self-cal, rms=0.082897Jy sigma=0.000675 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.18 mas, bmaj=7.765 mas, bpa=-1.015 degrees ! Estimated noise=2715.25 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000359301 Jy ! Component: 100 - total flux cleaned = 0.000610007 Jy ! Component: 150 - total flux cleaned = 0.000984957 Jy ! Component: 200 - total flux cleaned = 0.00132577 Jy ! Total flux subtracted in 200 components = 0.00132577 Jy ! Clean residual min=-0.006734 max=0.006545 Jy/beam ! Clean residual mean=0.000005 rms=0.001668 Jy/beam ! Combined flux in latest and established models = 0.324783 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 48 components and 0.324783 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082732Jy sigma=0.000674 ! Fit after self-cal, rms=0.082736Jy sigma=0.000674 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000201505 Jy ! Component: 100 - total flux cleaned = 0.000501316 Jy ! Component: 150 - total flux cleaned = 0.000776076 Jy ! Component: 200 - total flux cleaned = 0.00103006 Jy ! Total flux subtracted in 200 components = 0.00103006 Jy ! Clean residual min=-0.006595 max=0.006623 Jy/beam ! Clean residual mean=0.000005 rms=0.001651 Jy/beam ! Combined flux in latest and established models = 0.325813 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 57 components and 0.325813 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082658Jy sigma=0.000674 ! Fit after self-cal, rms=0.082659Jy sigma=0.000674 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082659Jy sigma=0.000674 ! Fit after self-cal, rms=0.082971Jy sigma=0.000673 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.178 mas, bmaj=7.772 mas, bpa=-1.024 degrees ! Estimated noise=2717.26 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000307993 Jy ! Component: 100 - total flux cleaned = 0.000545446 Jy ! Component: 150 - total flux cleaned = 0.000811274 Jy ! Component: 200 - total flux cleaned = 0.00105012 Jy ! Total flux subtracted in 200 components = 0.00105012 Jy ! Clean residual min=-0.006385 max=0.006584 Jy/beam ! Clean residual mean=0.000004 rms=0.001609 Jy/beam ! Combined flux in latest and established models = 0.326863 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 63 components and 0.326863 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082891Jy sigma=0.000673 ! Fit after self-cal, rms=0.082896Jy sigma=0.000673 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.1748e-06 Jy ! Component: 100 - total flux cleaned = 0.000218139 Jy ! Component: 150 - total flux cleaned = 0.000412988 Jy ! Component: 200 - total flux cleaned = 0.00055852 Jy ! Total flux subtracted in 200 components = 0.00055852 Jy ! Clean residual min=-0.006401 max=0.006652 Jy/beam ! Clean residual mean=0.000004 rms=0.001601 Jy/beam ! Combined flux in latest and established models = 0.327422 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 70 components and 0.327422 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082852Jy sigma=0.000672 ! Fit after self-cal, rms=0.082853Jy sigma=0.000672 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082853Jy sigma=0.000672 ! Fit after self-cal, rms=0.083055Jy sigma=0.000672 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.607 mas, bmaj=13.73 mas, bpa=7.432 degrees ! Estimated noise=3365.04 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000228249 Jy ! Component: 100 - total flux cleaned = 0.000268345 Jy ! Component: 150 - total flux cleaned = 0.000268559 Jy ! Component: 200 - total flux cleaned = 0.000323383 Jy ! Total flux subtracted in 200 components = 0.000323383 Jy ! Clean residual min=-0.006665 max=0.006795 Jy/beam ! Clean residual mean=0.000009 rms=0.001958 Jy/beam ! Combined flux in latest and established models = 0.327745 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 82 components and 0.327745 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083056Jy sigma=0.000672 ! Fit after self-cal, rms=0.083052Jy sigma=0.000672 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.37501e-05 Jy ! Component: 100 - total flux cleaned = -7.45753e-05 Jy ! Component: 150 - total flux cleaned = -2.64334e-05 Jy ! Component: 200 - total flux cleaned = -3.70279e-06 Jy ! Total flux subtracted in 200 components = -3.70279e-06 Jy ! Clean residual min=-0.006582 max=0.006818 Jy/beam ! Clean residual mean=0.000009 rms=0.001954 Jy/beam ! Combined flux in latest and established models = 0.327741 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 86 components and 0.327741 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083052Jy sigma=0.000672 ! Fit after self-cal, rms=0.083049Jy sigma=0.000672 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.177 mas, bmaj=7.777 mas, bpa=-1.049 degrees ! Estimated noise=2717.68 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.177 x 7.777 at -1.049 degrees (North through East) ! Clean map min=-0.0061389 max=0.29702 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.706 mas, bmaj=6.969 mas, bpa=-2.031 degrees ! Estimated noise=3115.2 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.238308 Jy ! Component: 100 - total flux cleaned = 0.290324 Jy ! Component: 150 - total flux cleaned = 0.304465 Jy ! Component: 200 - total flux cleaned = 0.311276 Jy ! Total flux subtracted in 200 components = 0.311276 Jy ! Clean residual min=-0.009998 max=0.008999 Jy/beam ! Clean residual mean=-0.000013 rms=0.002266 Jy/beam ! Combined flux in latest and established models = 0.311276 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.311276 Jy ! Inverting map and beam ! Estimated beam: bmin=3.177 mas, bmaj=7.777 mas, bpa=-1.049 degrees ! Estimated noise=2717.68 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00543646 Jy ! Component: 100 - total flux cleaned = 0.00843638 Jy ! Component: 150 - total flux cleaned = 0.00968313 Jy ! Component: 200 - total flux cleaned = 0.0105703 Jy ! Total flux subtracted in 200 components = 0.0105703 Jy ! Clean residual min=-0.006830 max=0.006506 Jy/beam ! Clean residual mean=0.000002 rms=0.001682 Jy/beam ! Combined flux in latest and established models = 0.321847 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 44 components and 0.321846 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.607 mas, bmaj=13.73 mas, bpa=7.432 degrees ! Estimated noise=3365.04 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00348332 Jy ! Component: 100 - total flux cleaned = 0.00403559 Jy ! Component: 150 - total flux cleaned = 0.00426964 Jy ! Component: 200 - total flux cleaned = 0.00433975 Jy ! Total flux subtracted in 200 components = 0.00433975 Jy ! Clean residual min=-0.006622 max=0.006947 Jy/beam ! Clean residual mean=0.000008 rms=0.001963 Jy/beam ! Combined flux in latest and established models = 0.326186 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.71063e-05 Jy ! Component: 100 - total flux cleaned = 0.00015572 Jy ! Component: 150 - total flux cleaned = 0.000212019 Jy ! Component: 200 - total flux cleaned = 0.00028953 Jy ! Total flux subtracted in 200 components = 0.00028953 Jy ! Clean residual min=-0.006533 max=0.006886 Jy/beam ! Clean residual mean=0.000008 rms=0.001957 Jy/beam ! Combined flux in latest and established models = 0.326476 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 62 components and 0.326476 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.177 mas, bmaj=7.777 mas, bpa=-1.049 degrees ! Estimated noise=2717.68 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00158746 Jy ! Component: 100 - total flux cleaned = -0.00128259 Jy ! Component: 150 - total flux cleaned = -0.00108222 Jy ! Component: 200 - total flux cleaned = -0.000837344 Jy ! Total flux subtracted in 200 components = -0.000837344 Jy ! Clean residual min=-0.006526 max=0.006626 Jy/beam ! Clean residual mean=0.000003 rms=0.001626 Jy/beam ! Combined flux in latest and established models = 0.325638 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 76 components and 0.325638 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083248Jy sigma=0.000673 ! Fit after self-cal, rms=0.083229Jy sigma=0.000673 wmodel J1136-0330_S_2017_06_15_pus_map.mod ! Writing 76 model components to file: J1136-0330_S_2017_06_15_pus_map.mod wobs J1136-0330_S_2017_06_15_pus_uvs.fits ! Writing UV FITS file: J1136-0330_S_2017_06_15_pus_uvs.fits wwins J1136-0330_S_2017_06_15_pus_map.win ! wwins: Wrote 2 windows to J1136-0330_S_2017_06_15_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000713417 Jy ! Component: 100 - total flux cleaned = -0.00127367 Jy ! Component: 150 - total flux cleaned = -0.00219645 Jy ! Component: 200 - total flux cleaned = -0.00286989 Jy ! Component: 250 - total flux cleaned = -0.00350583 Jy ! Component: 300 - total flux cleaned = -0.00393685 Jy ! Component: 350 - total flux cleaned = -0.00418614 Jy ! Component: 400 - total flux cleaned = -0.00395227 Jy ! Component: 450 - total flux cleaned = -0.00380356 Jy ! Component: 500 - total flux cleaned = -0.00365665 Jy ! Component: 550 - total flux cleaned = -0.00365732 Jy ! Component: 600 - total flux cleaned = -0.00365562 Jy ! Component: 650 - total flux cleaned = -0.00365373 Jy ! Component: 700 - total flux cleaned = -0.00365178 Jy ! Component: 750 - total flux cleaned = -0.00352681 Jy ! Component: 800 - total flux cleaned = -0.00358924 Jy ! Component: 850 - total flux cleaned = -0.0035905 Jy ! Component: 900 - total flux cleaned = -0.00382527 Jy ! Component: 950 - total flux cleaned = -0.00376799 Jy ! Component: 1000 - total flux cleaned = -0.00365649 Jy ! Component: 1050 - total flux cleaned = -0.00360273 Jy ! Component: 1100 - total flux cleaned = -0.00370989 Jy ! Component: 1150 - total flux cleaned = -0.00360448 Jy ! Component: 1200 - total flux cleaned = -0.00355366 Jy ! Component: 1250 - total flux cleaned = -0.0034524 Jy ! Component: 1300 - total flux cleaned = -0.00320472 Jy ! Component: 1350 - total flux cleaned = -0.00305925 Jy ! Component: 1400 - total flux cleaned = -0.00282011 Jy ! Component: 1450 - total flux cleaned = -0.00253873 Jy ! Component: 1500 - total flux cleaned = -0.00235417 Jy ! Component: 1550 - total flux cleaned = -0.00203702 Jy ! Component: 1600 - total flux cleaned = -0.00190283 Jy ! Component: 1650 - total flux cleaned = -0.00177081 Jy ! Component: 1700 - total flux cleaned = -0.00146725 Jy ! Component: 1750 - total flux cleaned = -0.00129735 Jy ! Component: 1800 - total flux cleaned = -0.0011285 Jy ! Component: 1850 - total flux cleaned = -0.00075584 Jy ! Component: 1900 - total flux cleaned = -0.000551738 Jy ! Component: 1950 - total flux cleaned = -0.000309622 Jy ! Component: 2000 - total flux cleaned = -7.07056e-05 Jy ! Component: 2050 - total flux cleaned = 8.64916e-05 Jy ! Component: 2100 - total flux cleaned = 0.000280905 Jy ! Component: 2150 - total flux cleaned = 0.000472868 Jy ! Component: 2200 - total flux cleaned = 0.000586993 Jy ! Component: 2250 - total flux cleaned = 0.000774728 Jy ! Component: 2300 - total flux cleaned = 0.000885646 Jy ! Component: 2350 - total flux cleaned = 0.000995584 Jy ! Component: 2400 - total flux cleaned = 0.00114113 Jy ! Component: 2450 - total flux cleaned = 0.00121361 Jy ! Component: 2500 - total flux cleaned = 0.00135648 Jy ! Component: 2550 - total flux cleaned = 0.00142736 Jy ! Component: 2600 - total flux cleaned = 0.00153236 Jy ! Component: 2650 - total flux cleaned = 0.00167133 Jy ! Component: 2700 - total flux cleaned = 0.00173977 Jy ! Component: 2750 - total flux cleaned = 0.00184231 Jy ! Component: 2800 - total flux cleaned = 0.00187602 Jy ! Component: 2850 - total flux cleaned = 0.00197742 Jy ! Component: 2900 - total flux cleaned = 0.00211105 Jy ! Component: 2950 - total flux cleaned = 0.00214422 Jy ! Component: 3000 - total flux cleaned = 0.00217724 Jy ! Component: 3050 - total flux cleaned = 0.00220983 Jy ! Component: 3100 - total flux cleaned = 0.00234009 Jy ! Component: 3150 - total flux cleaned = 0.00243682 Jy ! Component: 3200 - total flux cleaned = 0.00243657 Jy ! Component: 3250 - total flux cleaned = 0.00253232 Jy ! Component: 3300 - total flux cleaned = 0.00262705 Jy ! Component: 3350 - total flux cleaned = 0.00278432 Jy ! Component: 3400 - total flux cleaned = 0.00272189 Jy ! Component: 3450 - total flux cleaned = 0.00290846 Jy ! Component: 3500 - total flux cleaned = 0.00297018 Jy ! Component: 3550 - total flux cleaned = 0.00290869 Jy ! Component: 3600 - total flux cleaned = 0.00296994 Jy ! Component: 3650 - total flux cleaned = 0.00303099 Jy ! Component: 3700 - total flux cleaned = 0.00306124 Jy ! Component: 3750 - total flux cleaned = 0.00309124 Jy ! Component: 3800 - total flux cleaned = 0.00309144 Jy ! Component: 3850 - total flux cleaned = 0.00321083 Jy ! Component: 3900 - total flux cleaned = 0.00332977 Jy ! Component: 3950 - total flux cleaned = 0.0033003 Jy ! Component: 4000 - total flux cleaned = 0.00347676 Jy ! Component: 4050 - total flux cleaned = 0.00350606 Jy ! Total flux subtracted in 4096 components = 0.00365201 Jy ! Clean residual min=-0.001848 max=0.001889 Jy/beam ! Clean residual mean=-0.000001 rms=0.000489 Jy/beam ! Combined flux in latest and established models = 0.32929 Jy keep ! Adding 251 model components to the UV plane model. ! The established model now contains 327 components and 0.32929 Jy ![Exited script file: muppet] wmap "J1136-0330_S_2017_06_15_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.177 x 7.777 at -1.049 degrees (North through East) ! Clean map min=-0.0036417 max=0.30001 Jy/beam ! Writing clean map to FITS file: J1136-0330_S_2017_06_15_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.300014 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000460313 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.460292 0.460292 0.920583 1.84117 3.68233 7.36467 14.7293 29.4587 58.9173 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0013 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.3 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.177 x 7.777 at -1.049 degrees (North through East) ! Clean map min=-0.0036417 max=0.30001 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1136-0330_S_2017_06_15_pus_uvs.log closed on Tue May 7 15:17:42 2019