! Started logfile: J1133+0040_S_2017_10_21_pus_uvs.log on Sat May 11 20:57:43 2019 obs J1133+0040_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J1133+0040_S_2017_10_21_pus_uva.fits ! AN table 1: 20 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.894444 visibilities/baseline/integration-bin. ! Found source: J1133+0040 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 2576 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1133+0040_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 93 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.751782Jy sigma=0.007039 ! Fit after self-cal, rms=0.745640Jy sigma=0.006987 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.019 mas, bmaj=15.25 mas, bpa=-18.25 degrees ! Estimated noise=2008.42 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.19987 Jy ! Component: 100 - total flux cleaned = 0.24682 Jy ! Total flux subtracted in 100 components = 0.24682 Jy ! Clean residual min=-0.011436 max=0.018959 Jy/beam ! Clean residual mean=0.000094 rms=0.003538 Jy/beam ! Combined flux in latest and established models = 0.24682 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.24682 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104208Jy sigma=0.000859 ! Fit after self-cal, rms=0.104226Jy sigma=0.000859 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.577 mas, bmaj=14.69 mas, bpa=-18.17 degrees ! Estimated noise=1683.15 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0271362 Jy ! Component: 100 - total flux cleaned = 0.042346 Jy ! Component: 150 - total flux cleaned = 0.0517617 Jy ! Component: 200 - total flux cleaned = 0.058083 Jy ! Total flux subtracted in 200 components = 0.058083 Jy ! Clean residual min=-0.008729 max=0.009291 Jy/beam ! Clean residual mean=0.000042 rms=0.002360 Jy/beam ! Combined flux in latest and established models = 0.304903 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 60 components and 0.304903 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095880Jy sigma=0.000789 ! Fit after self-cal, rms=0.095885Jy sigma=0.000788 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.29 FD 0.90 HN 0.98 KP 1.09 ! LA 1.00 MK 0.97 NL 0.89 OV 0.99 ! PT 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.93 HN 1.00 KP 1.05 ! LA 0.98 MK 1.00 NL 1.04 OV 1.02 ! PT 0.96 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.98 HN 1.01 KP 1.02 ! LA 0.79 MK 1.04 NL 1.20 OV 0.93 ! PT 0.95 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.05 HN 0.97 KP 1.00* ! LA 0.88 MK 1.28 NL 1.00* OV 1.00* ! PT 0.97 ! ! ! Fit before self-cal, rms=0.095885Jy sigma=0.000788 ! Fit after self-cal, rms=0.089656Jy sigma=0.000740 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.611 mas, bmaj=14.97 mas, bpa=-18.12 degrees ! Estimated noise=1678.7 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00211723 Jy ! Component: 100 - total flux cleaned = -0.00291849 Jy ! Component: 150 - total flux cleaned = -0.003638 Jy ! Component: 200 - total flux cleaned = -0.00418923 Jy ! Total flux subtracted in 200 components = -0.00418923 Jy ! Clean residual min=-0.006568 max=0.007096 Jy/beam ! Clean residual mean=-0.000002 rms=0.001725 Jy/beam ! Combined flux in latest and established models = 0.300714 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 74 components and 0.300714 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089449Jy sigma=0.000738 ! Fit after self-cal, rms=0.089431Jy sigma=0.000738 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089431Jy sigma=0.000738 ! Fit after self-cal, rms=0.089406Jy sigma=0.000714 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.609 mas, bmaj=15.2 mas, bpa=-18.14 degrees ! Estimated noise=1680.52 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00196444 Jy ! Component: 100 - total flux cleaned = -0.00271426 Jy ! Component: 150 - total flux cleaned = -0.00288348 Jy ! Component: 200 - total flux cleaned = -0.00308969 Jy ! Total flux subtracted in 200 components = -0.00308969 Jy ! Clean residual min=-0.005647 max=0.006285 Jy/beam ! Clean residual mean=0.000009 rms=0.001292 Jy/beam ! Combined flux in latest and established models = 0.297624 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 88 components and 0.297624 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089299Jy sigma=0.000713 ! Fit after self-cal, rms=0.089363Jy sigma=0.000713 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (9.5, -8.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00544511 Jy ! Component: 100 - total flux cleaned = 0.00581743 Jy ! Component: 150 - total flux cleaned = 0.00544984 Jy ! Component: 200 - total flux cleaned = 0.00528496 Jy ! Total flux subtracted in 200 components = 0.00528496 Jy ! Clean residual min=-0.004827 max=0.004681 Jy/beam ! Clean residual mean=0.000002 rms=0.001147 Jy/beam ! Combined flux in latest and established models = 0.302909 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 115 components and 0.302909 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088948Jy sigma=0.000709 ! Fit after self-cal, rms=0.088906Jy sigma=0.000708 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088906Jy sigma=0.000708 ! Fit after self-cal, rms=0.088989Jy sigma=0.000708 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.605 mas, bmaj=15.23 mas, bpa=-18.13 degrees ! Estimated noise=1675.53 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000866742 Jy ! Component: 100 - total flux cleaned = 0.00049352 Jy ! Component: 150 - total flux cleaned = 0.00016308 Jy ! Component: 200 - total flux cleaned = -0.000261431 Jy ! Total flux subtracted in 200 components = -0.000261431 Jy ! Clean residual min=-0.004568 max=0.004325 Jy/beam ! Clean residual mean=0.000002 rms=0.001084 Jy/beam ! Combined flux in latest and established models = 0.302648 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 139 components and 0.302648 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088859Jy sigma=0.000707 ! Fit after self-cal, rms=0.088851Jy sigma=0.000707 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.54518e-05 Jy ! Component: 100 - total flux cleaned = -0.000516149 Jy ! Component: 150 - total flux cleaned = -0.000716929 Jy ! Component: 200 - total flux cleaned = -0.000906306 Jy ! Total flux subtracted in 200 components = -0.000906306 Jy ! Clean residual min=-0.004380 max=0.004207 Jy/beam ! Clean residual mean=0.000002 rms=0.001062 Jy/beam ! Combined flux in latest and established models = 0.301741 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 148 components and 0.301741 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088786Jy sigma=0.000706 ! Fit after self-cal, rms=0.088781Jy sigma=0.000706 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088781Jy sigma=0.000706 ! Fit after self-cal, rms=0.088802Jy sigma=0.000706 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.848 mas, bmaj=15.49 mas, bpa=-14.19 degrees ! Estimated noise=1959.4 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000633441 Jy ! Component: 100 - total flux cleaned = -0.000929754 Jy ! Component: 150 - total flux cleaned = -0.00119271 Jy ! Component: 200 - total flux cleaned = -0.00138993 Jy ! Total flux subtracted in 200 components = -0.00138993 Jy ! Clean residual min=-0.005057 max=0.004288 Jy/beam ! Clean residual mean=0.000003 rms=0.001200 Jy/beam ! Combined flux in latest and established models = 0.300351 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 170 components and 0.300351 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088773Jy sigma=0.000706 ! Fit after self-cal, rms=0.088772Jy sigma=0.000706 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000155037 Jy ! Component: 100 - total flux cleaned = -0.000363207 Jy ! Component: 150 - total flux cleaned = -0.000524157 Jy ! Component: 200 - total flux cleaned = -0.000615338 Jy ! Total flux subtracted in 200 components = -0.000615338 Jy ! Clean residual min=-0.005006 max=0.004204 Jy/beam ! Clean residual mean=0.000003 rms=0.001187 Jy/beam ! Combined flux in latest and established models = 0.299736 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 196 components and 0.299736 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088756Jy sigma=0.000706 ! Fit after self-cal, rms=0.088754Jy sigma=0.000706 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.604 mas, bmaj=15.26 mas, bpa=-18.13 degrees ! Estimated noise=1671.53 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.604 x 15.26 at -18.13 degrees (North through East) ! Clean map min=-0.0041668 max=0.25913 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.034 mas, bmaj=15.75 mas, bpa=-18.16 degrees ! Estimated noise=2012.14 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.200087 Jy ! Component: 100 - total flux cleaned = 0.246173 Jy ! Component: 150 - total flux cleaned = 0.266075 Jy ! Component: 200 - total flux cleaned = 0.27828 Jy ! Total flux subtracted in 200 components = 0.27828 Jy ! Clean residual min=-0.006887 max=0.008942 Jy/beam ! Clean residual mean=0.000032 rms=0.001792 Jy/beam ! Combined flux in latest and established models = 0.27828 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.27828 Jy ! Inverting map and beam ! Estimated beam: bmin=3.604 mas, bmaj=15.26 mas, bpa=-18.13 degrees ! Estimated noise=1671.53 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (34.5, -47.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00964571 Jy ! Component: 100 - total flux cleaned = 0.0156199 Jy ! Component: 150 - total flux cleaned = 0.0183949 Jy ! Component: 200 - total flux cleaned = 0.0196503 Jy ! Total flux subtracted in 200 components = 0.0196503 Jy ! Clean residual min=-0.004796 max=0.004167 Jy/beam ! Clean residual mean=0.000011 rms=0.001148 Jy/beam ! Combined flux in latest and established models = 0.29793 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 74 components and 0.29793 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.848 mas, bmaj=15.49 mas, bpa=-14.19 degrees ! Estimated noise=1959.4 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00210843 Jy ! Component: 100 - total flux cleaned = 0.00242496 Jy ! Component: 150 - total flux cleaned = 0.0026918 Jy ! Component: 200 - total flux cleaned = 0.00276984 Jy ! Total flux subtracted in 200 components = 0.00276984 Jy ! Clean residual min=-0.005151 max=0.004619 Jy/beam ! Clean residual mean=0.000008 rms=0.001232 Jy/beam ! Combined flux in latest and established models = 0.3007 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000208463 Jy ! Component: 100 - total flux cleaned = -0.000271149 Jy ! Component: 150 - total flux cleaned = -0.000391258 Jy ! Component: 200 - total flux cleaned = -0.000506692 Jy ! Total flux subtracted in 200 components = -0.000506692 Jy ! Clean residual min=-0.004869 max=0.004457 Jy/beam ! Clean residual mean=0.000007 rms=0.001185 Jy/beam ! Combined flux in latest and established models = 0.300193 Jy ! Adding 60 model components to the UV plane model. ! The established model now contains 125 components and 0.300193 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.604 mas, bmaj=15.26 mas, bpa=-18.13 degrees ! Estimated noise=1671.53 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000328487 Jy ! Component: 100 - total flux cleaned = -0.00016405 Jy ! Component: 150 - total flux cleaned = -0.000169144 Jy ! Component: 200 - total flux cleaned = -0.000236717 Jy ! Total flux subtracted in 200 components = -0.000236717 Jy ! Clean residual min=-0.003788 max=0.003848 Jy/beam ! Clean residual mean=0.000004 rms=0.001000 Jy/beam ! Combined flux in latest and established models = 0.299956 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 153 components and 0.299956 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088542Jy sigma=0.000705 ! Fit after self-cal, rms=0.088511Jy sigma=0.000705 wmodel J1133+0040_S_2017_10_21_pus_map.mod ! Writing 153 model components to file: J1133+0040_S_2017_10_21_pus_map.mod wobs J1133+0040_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J1133+0040_S_2017_10_21_pus_uvs.fits wwins J1133+0040_S_2017_10_21_pus_map.win ! wwins: Wrote 3 windows to J1133+0040_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000565661 Jy ! Component: 100 - total flux cleaned = 0.00128225 Jy ! Component: 150 - total flux cleaned = 0.00158863 Jy ! Component: 200 - total flux cleaned = 0.00170562 Jy ! Component: 250 - total flux cleaned = 0.00170558 Jy ! Component: 300 - total flux cleaned = 0.00159772 Jy ! Component: 350 - total flux cleaned = 0.00170238 Jy ! Component: 400 - total flux cleaned = 0.00175238 Jy ! Component: 450 - total flux cleaned = 0.00175082 Jy ! Component: 500 - total flux cleaned = 0.00160722 Jy ! Component: 550 - total flux cleaned = 0.0015153 Jy ! Component: 600 - total flux cleaned = 0.00138047 Jy ! Component: 650 - total flux cleaned = 0.00133726 Jy ! Component: 700 - total flux cleaned = 0.00120911 Jy ! Component: 750 - total flux cleaned = 0.00125165 Jy ! Component: 800 - total flux cleaned = 0.00121118 Jy ! Component: 850 - total flux cleaned = 0.00117216 Jy ! Component: 900 - total flux cleaned = 0.00121243 Jy ! Component: 950 - total flux cleaned = 0.00121267 Jy ! Component: 1000 - total flux cleaned = 0.00128925 Jy ! Component: 1050 - total flux cleaned = 0.00132677 Jy ! Component: 1100 - total flux cleaned = 0.00154689 Jy ! Component: 1150 - total flux cleaned = 0.0016187 Jy ! Component: 1200 - total flux cleaned = 0.00179604 Jy ! Component: 1250 - total flux cleaned = 0.00204026 Jy ! Component: 1300 - total flux cleaned = 0.00228006 Jy ! Component: 1350 - total flux cleaned = 0.00241454 Jy ! Component: 1400 - total flux cleaned = 0.00251411 Jy ! Component: 1450 - total flux cleaned = 0.00267865 Jy ! Component: 1500 - total flux cleaned = 0.00284092 Jy ! Component: 1550 - total flux cleaned = 0.00306401 Jy ! Component: 1600 - total flux cleaned = 0.00312672 Jy ! Component: 1650 - total flux cleaned = 0.00322012 Jy ! Component: 1700 - total flux cleaned = 0.00331222 Jy ! Component: 1750 - total flux cleaned = 0.00337303 Jy ! Component: 1800 - total flux cleaned = 0.00355282 Jy ! Component: 1850 - total flux cleaned = 0.00378924 Jy ! Component: 1900 - total flux cleaned = 0.00387663 Jy ! Component: 1950 - total flux cleaned = 0.00396381 Jy ! Component: 2000 - total flux cleaned = 0.00410715 Jy ! Component: 2050 - total flux cleaned = 0.00422042 Jy ! Component: 2100 - total flux cleaned = 0.00436049 Jy ! Component: 2150 - total flux cleaned = 0.00444388 Jy ! Component: 2200 - total flux cleaned = 0.00449899 Jy ! Component: 2250 - total flux cleaned = 0.00466232 Jy ! Component: 2300 - total flux cleaned = 0.00474306 Jy ! Component: 2350 - total flux cleaned = 0.00487619 Jy ! Component: 2400 - total flux cleaned = 0.00495517 Jy ! Component: 2450 - total flux cleaned = 0.00505971 Jy ! Component: 2500 - total flux cleaned = 0.00513742 Jy ! Component: 2550 - total flux cleaned = 0.00516263 Jy ! Component: 2600 - total flux cleaned = 0.00518773 Jy ! Component: 2650 - total flux cleaned = 0.00516266 Jy ! Component: 2700 - total flux cleaned = 0.00518758 Jy ! Component: 2750 - total flux cleaned = 0.00513843 Jy ! Component: 2800 - total flux cleaned = 0.00521183 Jy ! Component: 2850 - total flux cleaned = 0.00511458 Jy ! Component: 2900 - total flux cleaned = 0.00516268 Jy ! Component: 2950 - total flux cleaned = 0.00511477 Jy ! Component: 3000 - total flux cleaned = 0.00516229 Jy ! Component: 3050 - total flux cleaned = 0.00513863 Jy ! Component: 3100 - total flux cleaned = 0.00516232 Jy ! Component: 3150 - total flux cleaned = 0.00513896 Jy ! Component: 3200 - total flux cleaned = 0.00511596 Jy ! Component: 3250 - total flux cleaned = 0.00509316 Jy ! Component: 3300 - total flux cleaned = 0.00520649 Jy ! Component: 3350 - total flux cleaned = 0.00520648 Jy ! Component: 3400 - total flux cleaned = 0.00513954 Jy ! Component: 3450 - total flux cleaned = 0.00516156 Jy ! Component: 3500 - total flux cleaned = 0.00516147 Jy ! Component: 3550 - total flux cleaned = 0.00513966 Jy ! Component: 3600 - total flux cleaned = 0.00526987 Jy ! Component: 3650 - total flux cleaned = 0.00531298 Jy ! Component: 3700 - total flux cleaned = 0.00533421 Jy ! Component: 3750 - total flux cleaned = 0.00531293 Jy ! Component: 3800 - total flux cleaned = 0.00533395 Jy ! Component: 3850 - total flux cleaned = 0.00531306 Jy ! Component: 3900 - total flux cleaned = 0.00529245 Jy ! Component: 3950 - total flux cleaned = 0.00541658 Jy ! Component: 4000 - total flux cleaned = 0.00541654 Jy ! Component: 4050 - total flux cleaned = 0.00547812 Jy ! Total flux subtracted in 4096 components = 0.00560007 Jy ! Clean residual min=-0.001148 max=0.001260 Jy/beam ! Clean residual mean=-0.000002 rms=0.000394 Jy/beam ! Combined flux in latest and established models = 0.305557 Jy keep ! Adding 286 model components to the UV plane model. ! The established model now contains 439 components and 0.305556 Jy ![Exited script file: muppet] wmap "J1133+0040_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.604 x 15.26 at -18.13 degrees (North through East) ! Clean map min=-0.0025587 max=0.2587 Jy/beam ! Writing clean map to FITS file: J1133+0040_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.258702 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000383396 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.4446 0.4446 0.8892 1.7784 3.5568 7.1136 14.2272 28.4544 56.9088 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.258 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.604 x 15.26 at -18.13 degrees (North through East) ! Clean map min=-0.0025587 max=0.2587 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1133+0040_S_2017_10_21_pus_uvs.log closed on Sat May 11 20:57:48 2019