! Started logfile: J1133+0040_S_2017_05_01_pus_uvs.log on Wed May 1 18:34:20 2019 obs J1133+0040_S_2017_05_01_pus_uva.fits ! Reading UV FITS file: J1133+0040_S_2017_05_01_pus_uva.fits ! AN table 1: 15 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.585185 visibilities/baseline/integration-bin. ! Found source: J1133+0040 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 788 lines of history. ! ! Reading 1580 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1133+0040_S_2017_05_01_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 34 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 34 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 34 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 78 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.662207Jy sigma=0.004755 ! Fit after self-cal, rms=0.653836Jy sigma=0.004705 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.479 mas, bmaj=15.04 mas, bpa=-27.2 degrees ! Estimated noise=3392.24 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.276777 Jy ! Component: 100 - total flux cleaned = 0.337971 Jy ! Total flux subtracted in 100 components = 0.337971 Jy ! Clean residual min=-0.015880 max=0.020567 Jy/beam ! Clean residual mean=0.000216 rms=0.005056 Jy/beam ! Combined flux in latest and established models = 0.337971 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.337971 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117120Jy sigma=0.000716 ! Fit after self-cal, rms=0.117099Jy sigma=0.000716 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.64 mas, bmaj=14.7 mas, bpa=-27.65 degrees ! Estimated noise=2748.46 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0249525 Jy ! Component: 100 - total flux cleaned = 0.0372365 Jy ! Component: 150 - total flux cleaned = 0.0424309 Jy ! Component: 200 - total flux cleaned = 0.0435613 Jy ! Total flux subtracted in 200 components = 0.0435613 Jy ! Clean residual min=-0.008984 max=0.007503 Jy/beam ! Clean residual mean=0.000091 rms=0.002151 Jy/beam ! Combined flux in latest and established models = 0.381532 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 37 components and 0.381532 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112372Jy sigma=0.000671 ! Fit after self-cal, rms=0.112290Jy sigma=0.000670 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.96 HN 1.00* KP 1.05 ! LA 1.01 MK 0.92 NL 0.96 OV 1.01 ! PT 1.02 SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.97 HN 1.00* KP 0.99 ! LA 0.94 MK 0.99 NL 1.01 OV 1.07 ! PT 1.01 SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.03 HN 1.00* KP 1.02 ! LA 0.98 MK 1.06 NL 0.97 OV 0.95 ! PT 1.00 SC 1.00* ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.03 HN 1.00* KP 1.00* ! LA 0.93 MK 1.26 NL 1.00* OV 1.00* ! PT 1.02 SC 1.00* ! ! ! Fit before self-cal, rms=0.112290Jy sigma=0.000670 ! Fit after self-cal, rms=0.112505Jy sigma=0.000655 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.663 mas, bmaj=14.73 mas, bpa=-27.53 degrees ! Estimated noise=2738.61 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000363035 Jy ! Component: 100 - total flux cleaned = -0.000210936 Jy ! Component: 150 - total flux cleaned = -0.000140437 Jy ! Component: 200 - total flux cleaned = -0.000139199 Jy ! Total flux subtracted in 200 components = -0.000139199 Jy ! Clean residual min=-0.007586 max=0.005046 Jy/beam ! Clean residual mean=0.000023 rms=0.001442 Jy/beam ! Combined flux in latest and established models = 0.381393 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 51 components and 0.381393 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112334Jy sigma=0.000654 ! Fit after self-cal, rms=0.112339Jy sigma=0.000654 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112339Jy sigma=0.000654 ! Fit after self-cal, rms=0.112471Jy sigma=0.000654 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.666 mas, bmaj=14.73 mas, bpa=-27.51 degrees ! Estimated noise=2738.71 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000216591 Jy ! Component: 100 - total flux cleaned = 7.92281e-05 Jy ! Component: 150 - total flux cleaned = 0.000220628 Jy ! Component: 200 - total flux cleaned = 0.000302072 Jy ! Total flux subtracted in 200 components = 0.000302072 Jy ! Clean residual min=-0.007387 max=0.004714 Jy/beam ! Clean residual mean=0.000023 rms=0.001365 Jy/beam ! Combined flux in latest and established models = 0.381695 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 57 components and 0.381695 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112391Jy sigma=0.000653 ! Fit after self-cal, rms=0.112387Jy sigma=0.000653 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.43013e-05 Jy ! Component: 100 - total flux cleaned = 2.59127e-05 Jy ! Component: 150 - total flux cleaned = 0.000158781 Jy ! Component: 200 - total flux cleaned = 0.000188071 Jy ! Total flux subtracted in 200 components = 0.000188071 Jy ! Clean residual min=-0.007219 max=0.004586 Jy/beam ! Clean residual mean=0.000022 rms=0.001336 Jy/beam ! Combined flux in latest and established models = 0.381883 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 63 components and 0.381883 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112348Jy sigma=0.000653 ! Fit after self-cal, rms=0.112346Jy sigma=0.000653 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112346Jy sigma=0.000653 ! Fit after self-cal, rms=0.112397Jy sigma=0.000653 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.667 mas, bmaj=14.73 mas, bpa=-27.51 degrees ! Estimated noise=2740.11 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000422711 Jy ! Component: 100 - total flux cleaned = 0.000575092 Jy ! Component: 150 - total flux cleaned = 0.000601175 Jy ! Component: 200 - total flux cleaned = 0.000626279 Jy ! Total flux subtracted in 200 components = 0.000626279 Jy ! Clean residual min=-0.007111 max=0.004472 Jy/beam ! Clean residual mean=0.000023 rms=0.001320 Jy/beam ! Combined flux in latest and established models = 0.382509 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 72 components and 0.382509 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112371Jy sigma=0.000653 ! Fit after self-cal, rms=0.112370Jy sigma=0.000653 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.26042e-05 Jy ! Component: 100 - total flux cleaned = 6.80594e-05 Jy ! Component: 150 - total flux cleaned = 9.0245e-05 Jy ! Component: 200 - total flux cleaned = 8.94142e-05 Jy ! Total flux subtracted in 200 components = 8.94142e-05 Jy ! Clean residual min=-0.007021 max=0.004429 Jy/beam ! Clean residual mean=0.000023 rms=0.001311 Jy/beam ! Combined flux in latest and established models = 0.382598 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 79 components and 0.382599 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112356Jy sigma=0.000653 ! Fit after self-cal, rms=0.112355Jy sigma=0.000653 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112355Jy sigma=0.000653 ! Fit after self-cal, rms=0.112409Jy sigma=0.000653 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.179 mas, bmaj=14.7 mas, bpa=-27.67 degrees ! Estimated noise=2805.76 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00068878 Jy ! Component: 100 - total flux cleaned = 0.000743226 Jy ! Component: 150 - total flux cleaned = 0.000727837 Jy ! Component: 200 - total flux cleaned = 0.000713643 Jy ! Total flux subtracted in 200 components = 0.000713643 Jy ! Clean residual min=-0.006174 max=0.003417 Jy/beam ! Clean residual mean=0.000032 rms=0.001304 Jy/beam ! Combined flux in latest and established models = 0.383312 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 97 components and 0.383312 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112408Jy sigma=0.000653 ! Fit after self-cal, rms=0.112404Jy sigma=0.000653 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.7136e-05 Jy ! Component: 100 - total flux cleaned = 4.64998e-05 Jy ! Component: 150 - total flux cleaned = 4.63136e-05 Jy ! Component: 200 - total flux cleaned = 3.39617e-05 Jy ! Total flux subtracted in 200 components = 3.39617e-05 Jy ! Clean residual min=-0.006137 max=0.003406 Jy/beam ! Clean residual mean=0.000031 rms=0.001297 Jy/beam ! Combined flux in latest and established models = 0.383346 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 109 components and 0.383346 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112402Jy sigma=0.000653 ! Fit after self-cal, rms=0.112398Jy sigma=0.000653 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=5.669 mas, bmaj=14.72 mas, bpa=-27.51 degrees ! Estimated noise=2741.85 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.669 x 14.72 at -27.51 degrees (North through East) ! Clean map min=-0.0068059 max=0.35915 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.51 mas, bmaj=15.13 mas, bpa=-26.98 degrees ! Estimated noise=3386.44 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.276284 Jy ! Component: 100 - total flux cleaned = 0.337225 Jy ! Component: 150 - total flux cleaned = 0.359808 Jy ! Component: 200 - total flux cleaned = 0.37165 Jy ! Total flux subtracted in 200 components = 0.37165 Jy ! Clean residual min=-0.009575 max=0.008074 Jy/beam ! Clean residual mean=0.000051 rms=0.002236 Jy/beam ! Combined flux in latest and established models = 0.37165 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.37165 Jy ! Inverting map and beam ! Estimated beam: bmin=5.669 mas, bmaj=14.72 mas, bpa=-27.51 degrees ! Estimated noise=2741.85 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00769714 Jy ! Component: 100 - total flux cleaned = 0.00949891 Jy ! Component: 150 - total flux cleaned = 0.0106289 Jy ! Component: 200 - total flux cleaned = 0.0111052 Jy ! Total flux subtracted in 200 components = 0.0111052 Jy ! Clean residual min=-0.007495 max=0.005125 Jy/beam ! Clean residual mean=0.000026 rms=0.001421 Jy/beam ! Combined flux in latest and established models = 0.382755 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 33 components and 0.382755 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.179 mas, bmaj=14.7 mas, bpa=-27.67 degrees ! Estimated noise=2805.76 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000467586 Jy ! Component: 100 - total flux cleaned = 0.000674328 Jy ! Component: 150 - total flux cleaned = 0.000761601 Jy ! Component: 200 - total flux cleaned = 0.00083012 Jy ! Total flux subtracted in 200 components = 0.00083012 Jy ! Clean residual min=-0.006192 max=0.003761 Jy/beam ! Clean residual mean=0.000031 rms=0.001334 Jy/beam ! Combined flux in latest and established models = 0.383585 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.47966e-08 Jy ! Component: 100 - total flux cleaned = -1.0937e-06 Jy ! Component: 150 - total flux cleaned = -2.6788e-05 Jy ! Component: 200 - total flux cleaned = -4.89794e-05 Jy ! Total flux subtracted in 200 components = -4.89794e-05 Jy ! Clean residual min=-0.006125 max=0.003655 Jy/beam ! Clean residual mean=0.000031 rms=0.001318 Jy/beam ! Combined flux in latest and established models = 0.383536 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 59 components and 0.383536 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=5.669 mas, bmaj=14.72 mas, bpa=-27.51 degrees ! Estimated noise=2741.85 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.67941e-05 Jy ! Component: 100 - total flux cleaned = 5.17947e-05 Jy ! Component: 150 - total flux cleaned = 4.99952e-05 Jy ! Component: 200 - total flux cleaned = 9.25596e-05 Jy ! Total flux subtracted in 200 components = 9.25596e-05 Jy ! Clean residual min=-0.007126 max=0.004523 Jy/beam ! Clean residual mean=0.000023 rms=0.001337 Jy/beam ! Combined flux in latest and established models = 0.383629 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 73 components and 0.383629 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112506Jy sigma=0.000653 ! Fit after self-cal, rms=0.112486Jy sigma=0.000653 wmodel J1133+0040_S_2017_05_01_pus_map.mod ! Writing 73 model components to file: J1133+0040_S_2017_05_01_pus_map.mod wobs J1133+0040_S_2017_05_01_pus_uvs.fits ! Writing UV FITS file: J1133+0040_S_2017_05_01_pus_uvs.fits wwins J1133+0040_S_2017_05_01_pus_map.win ! wwins: Wrote 1 windows to J1133+0040_S_2017_05_01_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00286407 Jy ! Component: 100 - total flux cleaned = -0.00288453 Jy ! Component: 150 - total flux cleaned = -0.00258674 Jy ! Component: 200 - total flux cleaned = -0.00231382 Jy ! Component: 250 - total flux cleaned = -0.00205714 Jy ! Component: 300 - total flux cleaned = -0.00163867 Jy ! Component: 350 - total flux cleaned = -0.00124202 Jy ! Component: 400 - total flux cleaned = -0.000917318 Jy ! Component: 450 - total flux cleaned = -0.000602361 Jy ! Component: 500 - total flux cleaned = -0.000347624 Jy ! Component: 550 - total flux cleaned = -3.80968e-06 Jy ! Component: 600 - total flux cleaned = 0.000233362 Jy ! Component: 650 - total flux cleaned = 0.000371133 Jy ! Component: 700 - total flux cleaned = 0.000460914 Jy ! Component: 750 - total flux cleaned = 0.000549116 Jy ! Component: 800 - total flux cleaned = 0.000720661 Jy ! Component: 850 - total flux cleaned = 0.000846401 Jy ! Component: 900 - total flux cleaned = 0.000968572 Jy ! Component: 950 - total flux cleaned = 0.00100847 Jy ! Component: 1000 - total flux cleaned = 0.00108588 Jy ! Component: 1050 - total flux cleaned = 0.00112364 Jy ! Component: 1100 - total flux cleaned = 0.00116051 Jy ! Component: 1150 - total flux cleaned = 0.00134239 Jy ! Component: 1200 - total flux cleaned = 0.00155722 Jy ! Component: 1250 - total flux cleaned = 0.00173363 Jy ! Component: 1300 - total flux cleaned = 0.00190794 Jy ! Component: 1350 - total flux cleaned = 0.00204596 Jy ! Component: 1400 - total flux cleaned = 0.00225016 Jy ! Component: 1450 - total flux cleaned = 0.00231736 Jy ! Component: 1500 - total flux cleaned = 0.00238391 Jy ! Component: 1550 - total flux cleaned = 0.00261368 Jy ! Component: 1600 - total flux cleaned = 0.00271127 Jy ! Component: 1650 - total flux cleaned = 0.00293652 Jy ! Component: 1700 - total flux cleaned = 0.00303187 Jy ! Component: 1750 - total flux cleaned = 0.00312648 Jy ! Component: 1800 - total flux cleaned = 0.00325151 Jy ! Component: 1850 - total flux cleaned = 0.00337514 Jy ! Component: 1900 - total flux cleaned = 0.00352819 Jy ! Component: 1950 - total flux cleaned = 0.00358872 Jy ! Component: 2000 - total flux cleaned = 0.00373882 Jy ! Component: 2050 - total flux cleaned = 0.00385787 Jy ! Component: 2100 - total flux cleaned = 0.0039465 Jy ! Component: 2150 - total flux cleaned = 0.00409316 Jy ! Component: 2200 - total flux cleaned = 0.00423842 Jy ! Component: 2250 - total flux cleaned = 0.00438252 Jy ! Component: 2300 - total flux cleaned = 0.0044109 Jy ! Component: 2350 - total flux cleaned = 0.0044393 Jy ! Component: 2400 - total flux cleaned = 0.00446772 Jy ! Component: 2450 - total flux cleaned = 0.00449582 Jy ! Component: 2500 - total flux cleaned = 0.00446763 Jy ! Component: 2550 - total flux cleaned = 0.00443975 Jy ! Component: 2600 - total flux cleaned = 0.00441167 Jy ! Component: 2650 - total flux cleaned = 0.00441152 Jy ! Component: 2700 - total flux cleaned = 0.00438377 Jy ! Component: 2750 - total flux cleaned = 0.00427273 Jy ! Component: 2800 - total flux cleaned = 0.00418996 Jy ! Component: 2850 - total flux cleaned = 0.00410685 Jy ! Component: 2900 - total flux cleaned = 0.00399633 Jy ! Component: 2950 - total flux cleaned = 0.00380269 Jy ! Component: 3000 - total flux cleaned = 0.00369182 Jy ! Component: 3050 - total flux cleaned = 0.00358113 Jy ! Component: 3100 - total flux cleaned = 0.00341504 Jy ! Component: 3150 - total flux cleaned = 0.00330428 Jy ! Component: 3200 - total flux cleaned = 0.00311023 Jy ! Component: 3250 - total flux cleaned = 0.00302701 Jy ! Component: 3300 - total flux cleaned = 0.00288816 Jy ! Component: 3350 - total flux cleaned = 0.00272145 Jy ! Component: 3400 - total flux cleaned = 0.00255463 Jy ! Component: 3450 - total flux cleaned = 0.0024711 Jy ! Component: 3500 - total flux cleaned = 0.00233162 Jy ! Component: 3550 - total flux cleaned = 0.00216409 Jy ! Component: 3600 - total flux cleaned = 0.00202394 Jy ! Component: 3650 - total flux cleaned = 0.00185557 Jy ! Component: 3700 - total flux cleaned = 0.00168669 Jy ! Component: 3750 - total flux cleaned = 0.0015173 Jy ! Component: 3800 - total flux cleaned = 0.00134746 Jy ! Component: 3850 - total flux cleaned = 0.00114849 Jy ! Component: 3900 - total flux cleaned = 0.00103426 Jy ! Component: 3950 - total flux cleaned = 0.000833933 Jy ! Component: 4000 - total flux cleaned = 0.000690123 Jy ! Component: 4050 - total flux cleaned = 0.000545721 Jy ! Total flux subtracted in 4096 components = 0.000400799 Jy ! Clean residual min=-0.001726 max=0.002049 Jy/beam ! Clean residual mean=0.000000 rms=0.000502 Jy/beam ! Combined flux in latest and established models = 0.38403 Jy keep ! Adding 195 model components to the UV plane model. ! The established model now contains 268 components and 0.38403 Jy ![Exited script file: muppet] wmap "J1133+0040_S_2017_05_01_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.669 x 14.72 at -27.51 degrees (North through East) ! Clean map min=-0.006326 max=0.35935 Jy/beam ! Writing clean map to FITS file: J1133+0040_S_2017_05_01_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.359352 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000527657 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.440508 0.440508 0.881016 1.76203 3.52406 7.04813 14.0963 28.1925 56.385 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0015 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.359 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.669 x 14.72 at -27.51 degrees (North through East) ! Clean map min=-0.006326 max=0.35935 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1133+0040_S_2017_05_01_pus_uvs.log closed on Wed May 1 18:34:24 2019