! Started logfile: J1133+0040_S_2017_02_19_pus_uvs.log on Sat May 4 18:49:58 2019 obs J1133+0040_S_2017_02_19_pus_uva.fits ! Reading UV FITS file: J1133+0040_S_2017_02_19_pus_uva.fits ! AN table 1: 8 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.533333 visibilities/baseline/integration-bin. ! Found source: J1133+0040 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 482 lines of history. ! ! Reading 768 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1133+0040_S_2017_02_19_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 47 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.702380Jy sigma=0.005832 ! Fit after self-cal, rms=0.699602Jy sigma=0.005812 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.148 mas, bmaj=8.195 mas, bpa=14.84 degrees ! Estimated noise=3860.52 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.229161 Jy ! Component: 100 - total flux cleaned = 0.282628 Jy ! Total flux subtracted in 100 components = 0.282628 Jy ! Clean residual min=-0.014740 max=0.023313 Jy/beam ! Clean residual mean=0.000104 rms=0.004911 Jy/beam ! Combined flux in latest and established models = 0.282628 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.282628 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104777Jy sigma=0.000771 ! Fit after self-cal, rms=0.104764Jy sigma=0.000771 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.673 mas, bmaj=9.03 mas, bpa=16.19 degrees ! Estimated noise=3458.27 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0266798 Jy ! Component: 100 - total flux cleaned = 0.0384569 Jy ! Component: 150 - total flux cleaned = 0.045336 Jy ! Component: 200 - total flux cleaned = 0.049888 Jy ! Total flux subtracted in 200 components = 0.049888 Jy ! Clean residual min=-0.011521 max=0.016399 Jy/beam ! Clean residual mean=0.000088 rms=0.003800 Jy/beam ! Combined flux in latest and established models = 0.332516 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 35 components and 0.332516 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096638Jy sigma=0.000726 ! Fit after self-cal, rms=0.096563Jy sigma=0.000726 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.94 HN 1.00 KP 0.99 ! LA 1.02 MK 1.00* NL 0.88 OV 1.07 ! PT 1.00* SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 0.92 HN 1.05 KP 1.04 ! LA 0.98 MK 1.00* NL 1.04 OV 1.10 ! PT 1.00* SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 0.98 HN 1.05 KP 0.89 ! LA 0.79 MK 1.00* NL 1.20 OV 1.02 ! PT 1.00* SC 0.98 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.09 HN 0.88 KP 1.00* ! LA 0.84 MK 1.00* NL 1.00* OV 1.02 ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.096563Jy sigma=0.000726 ! Fit after self-cal, rms=0.083878Jy sigma=0.000668 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.672 mas, bmaj=9.076 mas, bpa=16.2 degrees ! Estimated noise=3437.14 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000288703 Jy ! Component: 100 - total flux cleaned = 0.000290367 Jy ! Component: 150 - total flux cleaned = 0.000286727 Jy ! Component: 200 - total flux cleaned = 0.000331211 Jy ! Total flux subtracted in 200 components = 0.000331211 Jy ! Clean residual min=-0.008096 max=0.013003 Jy/beam ! Clean residual mean=0.000028 rms=0.002682 Jy/beam ! Combined flux in latest and established models = 0.332847 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 46 components and 0.332847 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083769Jy sigma=0.000667 ! Fit after self-cal, rms=0.083736Jy sigma=0.000667 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083736Jy sigma=0.000667 ! Fit after self-cal, rms=0.083724Jy sigma=0.000666 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.659 mas, bmaj=9.081 mas, bpa=16.36 degrees ! Estimated noise=3432.76 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000271557 Jy ! Component: 100 - total flux cleaned = 0.000200917 Jy ! Component: 150 - total flux cleaned = 0.000197286 Jy ! Component: 200 - total flux cleaned = 0.000241227 Jy ! Total flux subtracted in 200 components = 0.000241227 Jy ! Clean residual min=-0.008058 max=0.012814 Jy/beam ! Clean residual mean=0.000027 rms=0.002629 Jy/beam ! Combined flux in latest and established models = 0.333088 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 49 components and 0.333088 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083651Jy sigma=0.000666 ! Fit after self-cal, rms=0.083640Jy sigma=0.000666 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (28, -110.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0104714 Jy ! Component: 100 - total flux cleaned = 0.0135533 Jy ! Component: 150 - total flux cleaned = 0.013833 Jy ! Component: 200 - total flux cleaned = 0.0139318 Jy ! Total flux subtracted in 200 components = 0.0139318 Jy ! Clean residual min=-0.007153 max=0.008068 Jy/beam ! Clean residual mean=-0.000003 rms=0.001883 Jy/beam ! Combined flux in latest and established models = 0.34702 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 77 components and 0.34702 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082251Jy sigma=0.000655 ! Fit after self-cal, rms=0.082207Jy sigma=0.000655 ! Inverting map ! Added new window around map position (-22.5, -20.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0065747 Jy ! Component: 100 - total flux cleaned = 0.00799174 Jy ! Component: 150 - total flux cleaned = 0.00893866 Jy ! Component: 200 - total flux cleaned = 0.00929623 Jy ! Total flux subtracted in 200 components = 0.00929623 Jy ! Clean residual min=-0.006015 max=0.005261 Jy/beam ! Clean residual mean=0.000010 rms=0.001345 Jy/beam ! Combined flux in latest and established models = 0.356316 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 101 components and 0.356316 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081401Jy sigma=0.000648 ! Fit after self-cal, rms=0.081387Jy sigma=0.000648 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081387Jy sigma=0.000648 ! Fit after self-cal, rms=0.080753Jy sigma=0.000648 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.658 mas, bmaj=9.094 mas, bpa=16.4 degrees ! Estimated noise=3410.59 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0010268 Jy ! Component: 100 - total flux cleaned = 0.00112677 Jy ! Component: 150 - total flux cleaned = 0.000965271 Jy ! Component: 200 - total flux cleaned = 0.000740832 Jy ! Total flux subtracted in 200 components = 0.000740832 Jy ! Clean residual min=-0.005949 max=0.004764 Jy/beam ! Clean residual mean=0.000009 rms=0.001194 Jy/beam ! Combined flux in latest and established models = 0.357057 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 123 components and 0.357057 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080580Jy sigma=0.000647 ! Fit after self-cal, rms=0.080574Jy sigma=0.000647 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000231518 Jy ! Component: 100 - total flux cleaned = -0.000363564 Jy ! Component: 150 - total flux cleaned = -0.000365303 Jy ! Component: 200 - total flux cleaned = -0.000485405 Jy ! Total flux subtracted in 200 components = -0.000485405 Jy ! Clean residual min=-0.005972 max=0.004532 Jy/beam ! Clean residual mean=0.000011 rms=0.001146 Jy/beam ! Combined flux in latest and established models = 0.356572 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 137 components and 0.356572 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080482Jy sigma=0.000646 ! Fit after self-cal, rms=0.080478Jy sigma=0.000646 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080478Jy sigma=0.000646 ! Fit after self-cal, rms=0.080423Jy sigma=0.000646 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.558 mas, bmaj=10.99 mas, bpa=4.139 degrees ! Estimated noise=4320.01 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00129965 Jy ! Component: 100 - total flux cleaned = 0.0012368 Jy ! Component: 150 - total flux cleaned = 0.00134945 Jy ! Component: 200 - total flux cleaned = 0.00145274 Jy ! Total flux subtracted in 200 components = 0.00145274 Jy ! Clean residual min=-0.004651 max=0.005017 Jy/beam ! Clean residual mean=0.000015 rms=0.001229 Jy/beam ! Combined flux in latest and established models = 0.358024 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 156 components and 0.358024 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080375Jy sigma=0.000645 ! Fit after self-cal, rms=0.080373Jy sigma=0.000645 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (119.5, 109). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00456284 Jy ! Component: 100 - total flux cleaned = 0.00509523 Jy ! Component: 150 - total flux cleaned = 0.00565891 Jy ! Component: 200 - total flux cleaned = 0.00575757 Jy ! Total flux subtracted in 200 components = 0.00575757 Jy ! Clean residual min=-0.004095 max=0.004223 Jy/beam ! Clean residual mean=0.000020 rms=0.001024 Jy/beam ! Combined flux in latest and established models = 0.363782 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 180 components and 0.363782 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080108Jy sigma=0.000644 ! Fit after self-cal, rms=0.080081Jy sigma=0.000643 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.661 mas, bmaj=9.098 mas, bpa=16.4 degrees ! Estimated noise=3409.16 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.661 x 9.098 at 16.4 degrees (North through East) ! Clean map min=-0.0054219 max=0.296 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.14 mas, bmaj=8.237 mas, bpa=14.97 degrees ! Estimated noise=3829.81 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.227286 Jy ! Component: 100 - total flux cleaned = 0.281435 Jy ! Component: 150 - total flux cleaned = 0.303791 Jy ! Component: 200 - total flux cleaned = 0.31713 Jy ! Total flux subtracted in 200 components = 0.31713 Jy ! Clean residual min=-0.009858 max=0.010308 Jy/beam ! Clean residual mean=0.000024 rms=0.002650 Jy/beam ! Combined flux in latest and established models = 0.31713 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.31713 Jy ! Inverting map and beam ! Estimated beam: bmin=3.661 mas, bmaj=9.098 mas, bpa=16.4 degrees ! Estimated noise=3409.16 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0113176 Jy ! Component: 100 - total flux cleaned = 0.0196219 Jy ! Component: 150 - total flux cleaned = 0.0249796 Jy ! Component: 200 - total flux cleaned = 0.0290102 Jy ! Total flux subtracted in 200 components = 0.0290102 Jy ! Clean residual min=-0.006991 max=0.006536 Jy/beam ! Clean residual mean=0.000017 rms=0.001746 Jy/beam ! Combined flux in latest and established models = 0.34614 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 63 components and 0.34614 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.558 mas, bmaj=10.99 mas, bpa=4.139 degrees ! Estimated noise=4320.01 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00402031 Jy ! Component: 100 - total flux cleaned = 0.00505372 Jy ! Component: 150 - total flux cleaned = 0.00578613 Jy ! Component: 200 - total flux cleaned = 0.00693637 Jy ! Total flux subtracted in 200 components = 0.00693637 Jy ! Clean residual min=-0.005492 max=0.005012 Jy/beam ! Clean residual mean=0.000016 rms=0.001442 Jy/beam ! Combined flux in latest and established models = 0.353077 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0011823 Jy ! Component: 100 - total flux cleaned = 0.00239134 Jy ! Component: 150 - total flux cleaned = 0.00312884 Jy ! Component: 200 - total flux cleaned = 0.00358451 Jy ! Total flux subtracted in 200 components = 0.00358451 Jy ! Clean residual min=-0.004905 max=0.004757 Jy/beam ! Clean residual mean=0.000015 rms=0.001233 Jy/beam ! Combined flux in latest and established models = 0.356661 Jy ! Adding 75 model components to the UV plane model. ! The established model now contains 127 components and 0.356661 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.661 mas, bmaj=9.098 mas, bpa=16.4 degrees ! Estimated noise=3409.16 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00195565 Jy ! Component: 100 - total flux cleaned = 0.00382253 Jy ! Component: 150 - total flux cleaned = 0.00516132 Jy ! Component: 200 - total flux cleaned = 0.00598618 Jy ! Total flux subtracted in 200 components = 0.00598618 Jy ! Clean residual min=-0.005192 max=0.004874 Jy/beam ! Clean residual mean=0.000008 rms=0.001177 Jy/beam ! Combined flux in latest and established models = 0.362647 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 154 components and 0.362647 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080156Jy sigma=0.000644 ! Fit after self-cal, rms=0.080139Jy sigma=0.000644 wmodel J1133+0040_S_2017_02_19_pus_map.mod ! Writing 154 model components to file: J1133+0040_S_2017_02_19_pus_map.mod wobs J1133+0040_S_2017_02_19_pus_uvs.fits ! Writing UV FITS file: J1133+0040_S_2017_02_19_pus_uvs.fits wwins J1133+0040_S_2017_02_19_pus_map.win ! wwins: Wrote 4 windows to J1133+0040_S_2017_02_19_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00103017 Jy ! Component: 100 - total flux cleaned = -0.00152233 Jy ! Component: 150 - total flux cleaned = -0.00181857 Jy ! Component: 200 - total flux cleaned = -0.00222686 Jy ! Component: 250 - total flux cleaned = -0.00247895 Jy ! Component: 300 - total flux cleaned = -0.00247843 Jy ! Component: 350 - total flux cleaned = -0.00247884 Jy ! Component: 400 - total flux cleaned = -0.00248262 Jy ! Component: 450 - total flux cleaned = -0.00264498 Jy ! Component: 500 - total flux cleaned = -0.00285161 Jy ! Component: 550 - total flux cleaned = -0.00304978 Jy ! Component: 600 - total flux cleaned = -0.00324324 Jy ! Component: 650 - total flux cleaned = -0.00343159 Jy ! Component: 700 - total flux cleaned = -0.00361523 Jy ! Component: 750 - total flux cleaned = -0.00379402 Jy ! Component: 800 - total flux cleaned = -0.00383781 Jy ! Component: 850 - total flux cleaned = -0.0038379 Jy ! Component: 900 - total flux cleaned = -0.00392188 Jy ! Component: 950 - total flux cleaned = -0.00400365 Jy ! Component: 1000 - total flux cleaned = -0.00400328 Jy ! Component: 1050 - total flux cleaned = -0.00416154 Jy ! Component: 1100 - total flux cleaned = -0.00423912 Jy ! Component: 1150 - total flux cleaned = -0.00431626 Jy ! Component: 1200 - total flux cleaned = -0.00442952 Jy ! Component: 1250 - total flux cleaned = -0.00435511 Jy ! Component: 1300 - total flux cleaned = -0.00450233 Jy ! Component: 1350 - total flux cleaned = -0.00450243 Jy ! Component: 1400 - total flux cleaned = -0.00450253 Jy ! Component: 1450 - total flux cleaned = -0.00453841 Jy ! Component: 1500 - total flux cleaned = -0.00460891 Jy ! Component: 1550 - total flux cleaned = -0.00464367 Jy ! Component: 1600 - total flux cleaned = -0.00471226 Jy ! Component: 1650 - total flux cleaned = -0.00471221 Jy ! Component: 1700 - total flux cleaned = -0.00461095 Jy ! Component: 1750 - total flux cleaned = -0.00467789 Jy ! Component: 1800 - total flux cleaned = -0.00461114 Jy ! Component: 1850 - total flux cleaned = -0.00451168 Jy ! Component: 1900 - total flux cleaned = -0.00454459 Jy ! Component: 1950 - total flux cleaned = -0.00460994 Jy ! Component: 2000 - total flux cleaned = -0.00460986 Jy ! Component: 2050 - total flux cleaned = -0.00454541 Jy ! Component: 2100 - total flux cleaned = -0.00477063 Jy ! Component: 2150 - total flux cleaned = -0.00483472 Jy ! Component: 2200 - total flux cleaned = -0.00493063 Jy ! Component: 2250 - total flux cleaned = -0.00505812 Jy ! Component: 2300 - total flux cleaned = -0.00508997 Jy ! Component: 2350 - total flux cleaned = -0.00521671 Jy ! Component: 2400 - total flux cleaned = -0.00537472 Jy ! Component: 2450 - total flux cleaned = -0.00553253 Jy ! Component: 2500 - total flux cleaned = -0.00565851 Jy ! Component: 2550 - total flux cleaned = -0.00575281 Jy ! Component: 2600 - total flux cleaned = -0.00581554 Jy ! Component: 2650 - total flux cleaned = -0.005847 Jy ! Component: 2700 - total flux cleaned = -0.00590974 Jy ! Component: 2750 - total flux cleaned = -0.00590968 Jy ! Component: 2800 - total flux cleaned = -0.00606693 Jy ! Component: 2850 - total flux cleaned = -0.00619276 Jy ! Component: 2900 - total flux cleaned = -0.00625568 Jy ! Component: 2950 - total flux cleaned = -0.00635045 Jy ! Component: 3000 - total flux cleaned = -0.00641363 Jy ! Component: 3050 - total flux cleaned = -0.00647699 Jy ! Component: 3100 - total flux cleaned = -0.00657184 Jy ! Component: 3150 - total flux cleaned = -0.00663531 Jy ! Component: 3200 - total flux cleaned = -0.00669887 Jy ! Component: 3250 - total flux cleaned = -0.0067623 Jy ! Component: 3300 - total flux cleaned = -0.0068261 Jy ! Component: 3350 - total flux cleaned = -0.00688996 Jy ! Component: 3400 - total flux cleaned = -0.00692187 Jy ! Component: 3450 - total flux cleaned = -0.00701799 Jy ! Component: 3500 - total flux cleaned = -0.00711447 Jy ! Component: 3550 - total flux cleaned = -0.00717901 Jy ! Component: 3600 - total flux cleaned = -0.00727603 Jy ! Component: 3650 - total flux cleaned = -0.00734071 Jy ! Component: 3700 - total flux cleaned = -0.0073407 Jy ! Component: 3750 - total flux cleaned = -0.0074389 Jy ! Component: 3800 - total flux cleaned = -0.00743915 Jy ! Component: 3850 - total flux cleaned = -0.00750509 Jy ! Component: 3900 - total flux cleaned = -0.00753816 Jy ! Component: 3950 - total flux cleaned = -0.00763786 Jy ! Component: 4000 - total flux cleaned = -0.00780524 Jy ! Component: 4050 - total flux cleaned = -0.00787249 Jy ! Total flux subtracted in 4096 components = -0.0079401 Jy ! Clean residual min=-0.002080 max=0.002242 Jy/beam ! Clean residual mean=-0.000002 rms=0.000564 Jy/beam ! Combined flux in latest and established models = 0.354707 Jy keep ! Adding 247 model components to the UV plane model. ! The established model now contains 401 components and 0.354708 Jy ![Exited script file: muppet] wmap "J1133+0040_S_2017_02_19_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.661 x 9.098 at 16.4 degrees (North through East) ! Clean map min=-0.0056576 max=0.29636 Jy/beam ! Writing clean map to FITS file: J1133+0040_S_2017_02_19_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.296362 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000570028 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.577025 0.577025 1.15405 2.3081 4.6162 9.2324 18.4648 36.9296 73.8592 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0017 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.296 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.661 x 9.098 at 16.4 degrees (North through East) ! Clean map min=-0.0056576 max=0.29636 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1133+0040_S_2017_02_19_pus_uvs.log closed on Sat May 4 18:50:03 2019