! Started logfile: J1133+0040_S_2017_01_21_pus_uvs.log on Sun May 5 15:53:57 2019 obs J1133+0040_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J1133+0040_S_2017_01_21_pus_uva.fits ! AN table 1: 16 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.671875 visibilities/baseline/integration-bin. ! Found source: J1133+0040 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 1548 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1133+0040_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 60 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.735876Jy sigma=0.005170 ! Fit after self-cal, rms=0.731598Jy sigma=0.005142 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.822 mas, bmaj=6.349 mas, bpa=-3.887 degrees ! Estimated noise=3192.48 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.214962 Jy ! Component: 100 - total flux cleaned = 0.261985 Jy ! Total flux subtracted in 100 components = 0.261985 Jy ! Clean residual min=-0.013327 max=0.016040 Jy/beam ! Clean residual mean=-0.000057 rms=0.003290 Jy/beam ! Combined flux in latest and established models = 0.261985 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.261985 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111169Jy sigma=0.000705 ! Fit after self-cal, rms=0.111161Jy sigma=0.000705 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.282 mas, bmaj=6.961 mas, bpa=-3.026 degrees ! Estimated noise=2778.1 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0191273 Jy ! Component: 100 - total flux cleaned = 0.0277527 Jy ! Component: 150 - total flux cleaned = 0.0324464 Jy ! Component: 200 - total flux cleaned = 0.035241 Jy ! Total flux subtracted in 200 components = 0.035241 Jy ! Clean residual min=-0.010681 max=0.013497 Jy/beam ! Clean residual mean=-0.000089 rms=0.002820 Jy/beam ! Combined flux in latest and established models = 0.297226 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 24 components and 0.297226 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109000Jy sigma=0.000676 ! Fit after self-cal, rms=0.108990Jy sigma=0.000675 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.00* HN 0.93 LA 1.02 ! MK 0.96 NL 1.00 OV 1.02 PT 0.96 ! SC 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.00* HN 1.01 LA 0.96 ! MK 0.95 NL 1.01 OV 1.12 PT 0.95 ! SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00* HN 1.03 LA 0.96 ! MK 1.03 NL 0.99 OV 0.97 PT 0.91 ! SC 1.02 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 1.00* HN 0.97 LA 0.94 ! MK 1.20 NL 1.00* OV 1.14 PT 0.96 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.108990Jy sigma=0.000675 ! Fit after self-cal, rms=0.111029Jy sigma=0.000656 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.279 mas, bmaj=7.005 mas, bpa=-2.996 degrees ! Estimated noise=2760.47 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00104555 Jy ! Component: 100 - total flux cleaned = -0.00156646 Jy ! Component: 150 - total flux cleaned = -0.00163798 Jy ! Component: 200 - total flux cleaned = -0.00170539 Jy ! Total flux subtracted in 200 components = -0.00170539 Jy ! Clean residual min=-0.009217 max=0.011967 Jy/beam ! Clean residual mean=-0.000041 rms=0.002373 Jy/beam ! Combined flux in latest and established models = 0.295521 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 32 components and 0.295521 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110842Jy sigma=0.000655 ! Fit after self-cal, rms=0.111072Jy sigma=0.000655 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111072Jy sigma=0.000655 ! Fit after self-cal, rms=0.112453Jy sigma=0.000644 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.268 mas, bmaj=7 mas, bpa=-3.083 degrees ! Estimated noise=2758.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000691433 Jy ! Component: 100 - total flux cleaned = 0.000834149 Jy ! Component: 150 - total flux cleaned = 0.000957491 Jy ! Component: 200 - total flux cleaned = 0.00101311 Jy ! Total flux subtracted in 200 components = 0.00101311 Jy ! Clean residual min=-0.008372 max=0.008373 Jy/beam ! Clean residual mean=-0.000013 rms=0.002035 Jy/beam ! Combined flux in latest and established models = 0.296534 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 39 components and 0.296534 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112343Jy sigma=0.000644 ! Fit after self-cal, rms=0.112443Jy sigma=0.000644 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.93314e-05 Jy ! Component: 100 - total flux cleaned = -0.000143375 Jy ! Component: 150 - total flux cleaned = -0.000142557 Jy ! Component: 200 - total flux cleaned = -0.000143789 Jy ! Total flux subtracted in 200 components = -0.000143789 Jy ! Clean residual min=-0.008397 max=0.008233 Jy/beam ! Clean residual mean=-0.000014 rms=0.002026 Jy/beam ! Combined flux in latest and established models = 0.29639 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 42 components and 0.29639 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112385Jy sigma=0.000643 ! Fit after self-cal, rms=0.112396Jy sigma=0.000643 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112396Jy sigma=0.000643 ! Fit after self-cal, rms=0.112400Jy sigma=0.000643 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.261 mas, bmaj=6.997 mas, bpa=-3.15 degrees ! Estimated noise=2752.19 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000331191 Jy ! Component: 100 - total flux cleaned = 0.000526573 Jy ! Component: 150 - total flux cleaned = 0.000572026 Jy ! Component: 200 - total flux cleaned = 0.000571941 Jy ! Total flux subtracted in 200 components = 0.000571941 Jy ! Clean residual min=-0.008368 max=0.008112 Jy/beam ! Clean residual mean=-0.000012 rms=0.002007 Jy/beam ! Combined flux in latest and established models = 0.296962 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 43 components and 0.296962 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112344Jy sigma=0.000643 ! Fit after self-cal, rms=0.112358Jy sigma=0.000643 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.40552e-05 Jy ! Component: 100 - total flux cleaned = -8.13065e-06 Jy ! Component: 150 - total flux cleaned = -4.1385e-05 Jy ! Component: 200 - total flux cleaned = -4.04203e-05 Jy ! Total flux subtracted in 200 components = -4.04203e-05 Jy ! Clean residual min=-0.008382 max=0.008016 Jy/beam ! Clean residual mean=-0.000013 rms=0.002003 Jy/beam ! Combined flux in latest and established models = 0.296922 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 44 components and 0.296922 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112320Jy sigma=0.000643 ! Fit after self-cal, rms=0.112332Jy sigma=0.000643 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112332Jy sigma=0.000643 ! Fit after self-cal, rms=0.112241Jy sigma=0.000643 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.938 mas, bmaj=11.3 mas, bpa=-0.2784 degrees ! Estimated noise=3586.65 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00174026 Jy ! Component: 100 - total flux cleaned = 0.00209615 Jy ! Component: 150 - total flux cleaned = 0.00234802 Jy ! Component: 200 - total flux cleaned = 0.00248251 Jy ! Total flux subtracted in 200 components = 0.00248251 Jy ! Clean residual min=-0.008220 max=0.008829 Jy/beam ! Clean residual mean=-0.000019 rms=0.002416 Jy/beam ! Combined flux in latest and established models = 0.299404 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 53 components and 0.299404 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112390Jy sigma=0.000644 ! Fit after self-cal, rms=0.112327Jy sigma=0.000643 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000194415 Jy ! Component: 100 - total flux cleaned = 0.000269035 Jy ! Component: 150 - total flux cleaned = 0.000323549 Jy ! Component: 200 - total flux cleaned = 0.000367974 Jy ! Total flux subtracted in 200 components = 0.000367974 Jy ! Clean residual min=-0.008321 max=0.008725 Jy/beam ! Clean residual mean=-0.000018 rms=0.002406 Jy/beam ! Combined flux in latest and established models = 0.299772 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 64 components and 0.299772 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112435Jy sigma=0.000644 ! Fit after self-cal, rms=0.112393Jy sigma=0.000643 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.256 mas, bmaj=6.996 mas, bpa=-3.22 degrees ! Estimated noise=2747.12 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.256 x 6.996 at -3.22 degrees (North through East) ! Clean map min=-0.0076363 max=0.27433 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.799 mas, bmaj=6.378 mas, bpa=-4.102 degrees ! Estimated noise=3153.32 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.212179 Jy ! Component: 100 - total flux cleaned = 0.259264 Jy ! Component: 150 - total flux cleaned = 0.276173 Jy ! Component: 200 - total flux cleaned = 0.285542 Jy ! Total flux subtracted in 200 components = 0.285542 Jy ! Clean residual min=-0.009169 max=0.009016 Jy/beam ! Clean residual mean=-0.000012 rms=0.002236 Jy/beam ! Combined flux in latest and established models = 0.285542 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.285542 Jy ! Inverting map and beam ! Estimated beam: bmin=3.256 mas, bmaj=6.996 mas, bpa=-3.22 degrees ! Estimated noise=2747.12 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00724913 Jy ! Component: 100 - total flux cleaned = 0.0107818 Jy ! Component: 150 - total flux cleaned = 0.0109842 Jy ! Component: 200 - total flux cleaned = 0.0111555 Jy ! Total flux subtracted in 200 components = 0.0111555 Jy ! Clean residual min=-0.008312 max=0.008469 Jy/beam ! Clean residual mean=-0.000013 rms=0.002045 Jy/beam ! Combined flux in latest and established models = 0.296697 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 25 components and 0.296697 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.938 mas, bmaj=11.3 mas, bpa=-0.2784 degrees ! Estimated noise=3586.65 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00172544 Jy ! Component: 100 - total flux cleaned = 0.00216438 Jy ! Component: 150 - total flux cleaned = 0.00239964 Jy ! Component: 200 - total flux cleaned = 0.00251638 Jy ! Total flux subtracted in 200 components = 0.00251638 Jy ! Clean residual min=-0.008605 max=0.008878 Jy/beam ! Clean residual mean=-0.000021 rms=0.002428 Jy/beam ! Combined flux in latest and established models = 0.299214 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.62159e-05 Jy ! Component: 100 - total flux cleaned = 4.67791e-05 Jy ! Component: 150 - total flux cleaned = 8.3917e-05 Jy ! Component: 200 - total flux cleaned = 0.000115303 Jy ! Total flux subtracted in 200 components = 0.000115303 Jy ! Clean residual min=-0.008409 max=0.008645 Jy/beam ! Clean residual mean=-0.000020 rms=0.002396 Jy/beam ! Combined flux in latest and established models = 0.299329 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 39 components and 0.299329 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.256 mas, bmaj=6.996 mas, bpa=-3.22 degrees ! Estimated noise=2747.12 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00208683 Jy ! Component: 100 - total flux cleaned = -0.00179188 Jy ! Component: 150 - total flux cleaned = -0.00171597 Jy ! Component: 200 - total flux cleaned = -0.00177836 Jy ! Total flux subtracted in 200 components = -0.00177836 Jy ! Clean residual min=-0.008194 max=0.007912 Jy/beam ! Clean residual mean=-0.000011 rms=0.001994 Jy/beam ! Combined flux in latest and established models = 0.297551 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 45 components and 0.297551 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112389Jy sigma=0.000643 ! Fit after self-cal, rms=0.112414Jy sigma=0.000643 wmodel J1133+0040_S_2017_01_21_pus_map.mod ! Writing 45 model components to file: J1133+0040_S_2017_01_21_pus_map.mod wobs J1133+0040_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J1133+0040_S_2017_01_21_pus_uvs.fits wwins J1133+0040_S_2017_01_21_pus_map.win ! wwins: Wrote 1 windows to J1133+0040_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00031701 Jy ! Component: 100 - total flux cleaned = -5.34582e-05 Jy ! Component: 150 - total flux cleaned = 0.000326472 Jy ! Component: 200 - total flux cleaned = 0.000211158 Jy ! Component: 250 - total flux cleaned = -0.000129841 Jy ! Component: 300 - total flux cleaned = -0.0008957 Jy ! Component: 350 - total flux cleaned = -0.00131763 Jy ! Component: 400 - total flux cleaned = -0.00213646 Jy ! Component: 450 - total flux cleaned = -0.00283086 Jy ! Component: 500 - total flux cleaned = -0.0035053 Jy ! Component: 550 - total flux cleaned = -0.00406418 Jy ! Component: 600 - total flux cleaned = -0.00461075 Jy ! Component: 650 - total flux cleaned = -0.00496685 Jy ! Component: 700 - total flux cleaned = -0.00531763 Jy ! Component: 750 - total flux cleaned = -0.00557341 Jy ! Component: 800 - total flux cleaned = -0.00590673 Jy ! Component: 850 - total flux cleaned = -0.00631352 Jy ! Component: 900 - total flux cleaned = -0.0063143 Jy ! Component: 950 - total flux cleaned = -0.00678645 Jy ! Component: 1000 - total flux cleaned = -0.00724532 Jy ! Component: 1050 - total flux cleaned = -0.00754566 Jy ! Component: 1100 - total flux cleaned = -0.00784234 Jy ! Component: 1150 - total flux cleaned = -0.0081324 Jy ! Component: 1200 - total flux cleaned = -0.00827619 Jy ! Component: 1250 - total flux cleaned = -0.00862757 Jy ! Component: 1300 - total flux cleaned = -0.00890232 Jy ! Component: 1350 - total flux cleaned = -0.00890189 Jy ! Component: 1400 - total flux cleaned = -0.00917113 Jy ! Component: 1450 - total flux cleaned = -0.00943501 Jy ! Component: 1500 - total flux cleaned = -0.00969461 Jy ! Component: 1550 - total flux cleaned = -0.00975801 Jy ! Component: 1600 - total flux cleaned = -0.00988369 Jy ! Component: 1650 - total flux cleaned = -0.0100086 Jy ! Component: 1700 - total flux cleaned = -0.0100689 Jy ! Component: 1750 - total flux cleaned = -0.0100695 Jy ! Component: 1800 - total flux cleaned = -0.0101898 Jy ! Component: 1850 - total flux cleaned = -0.0101904 Jy ! Component: 1900 - total flux cleaned = -0.0100765 Jy ! Component: 1950 - total flux cleaned = -0.0103051 Jy ! Component: 2000 - total flux cleaned = -0.0103615 Jy ! Component: 2050 - total flux cleaned = -0.0104729 Jy ! Component: 2100 - total flux cleaned = -0.0104724 Jy ! Component: 2150 - total flux cleaned = -0.0105258 Jy ! Component: 2200 - total flux cleaned = -0.0107928 Jy ! Component: 2250 - total flux cleaned = -0.010899 Jy ! Component: 2300 - total flux cleaned = -0.0111598 Jy ! Component: 2350 - total flux cleaned = -0.0112108 Jy ! Component: 2400 - total flux cleaned = -0.0113632 Jy ! Component: 2450 - total flux cleaned = -0.0115648 Jy ! Component: 2500 - total flux cleaned = -0.0116144 Jy ! Component: 2550 - total flux cleaned = -0.0117123 Jy ! Component: 2600 - total flux cleaned = -0.0116632 Jy ! Component: 2650 - total flux cleaned = -0.0117114 Jy ! Component: 2700 - total flux cleaned = -0.01195 Jy ! Component: 2750 - total flux cleaned = -0.0119024 Jy ! Component: 2800 - total flux cleaned = -0.012043 Jy ! Component: 2850 - total flux cleaned = -0.0121367 Jy ! Component: 2900 - total flux cleaned = -0.0123208 Jy ! Component: 2950 - total flux cleaned = -0.0123664 Jy ! Component: 3000 - total flux cleaned = -0.0125014 Jy ! Component: 3050 - total flux cleaned = -0.012591 Jy ! Component: 3100 - total flux cleaned = -0.0126351 Jy ! Component: 3150 - total flux cleaned = -0.0127234 Jy ! Component: 3200 - total flux cleaned = -0.0128539 Jy ! Component: 3250 - total flux cleaned = -0.0128108 Jy ! Component: 3300 - total flux cleaned = -0.0128112 Jy ! Component: 3350 - total flux cleaned = -0.0130649 Jy ! Component: 3400 - total flux cleaned = -0.013023 Jy ! Component: 3450 - total flux cleaned = -0.0129401 Jy ! Component: 3500 - total flux cleaned = -0.0131884 Jy ! Component: 3550 - total flux cleaned = -0.0131878 Jy ! Component: 3600 - total flux cleaned = -0.013269 Jy ! Component: 3650 - total flux cleaned = -0.0133088 Jy ! Component: 3700 - total flux cleaned = -0.0133887 Jy ! Component: 3750 - total flux cleaned = -0.0135476 Jy ! Component: 3800 - total flux cleaned = -0.013587 Jy ! Component: 3850 - total flux cleaned = -0.0137044 Jy ! Component: 3900 - total flux cleaned = -0.0137046 Jy ! Component: 3950 - total flux cleaned = -0.0138586 Jy ! Component: 4000 - total flux cleaned = -0.0138584 Jy ! Component: 4050 - total flux cleaned = -0.0139722 Jy ! Total flux subtracted in 4096 components = -0.0139344 Jy ! Clean residual min=-0.002288 max=0.002403 Jy/beam ! Clean residual mean=0.000001 rms=0.000663 Jy/beam ! Combined flux in latest and established models = 0.283616 Jy keep ! Adding 290 model components to the UV plane model. ! The established model now contains 335 components and 0.283616 Jy ![Exited script file: muppet] wmap "J1133+0040_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.256 x 6.996 at -3.22 degrees (North through East) ! Clean map min=-0.0060021 max=0.27491 Jy/beam ! Writing clean map to FITS file: J1133+0040_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.274913 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000657029 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.716985 0.716985 1.43397 2.86794 5.73588 11.4718 22.9435 45.887 91.774 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0019 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.274 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.256 x 6.996 at -3.22 degrees (North through East) ! Clean map min=-0.0060021 max=0.27491 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1133+0040_S_2017_01_21_pus_uvs.log closed on Sun May 5 15:54:01 2019