! Started logfile: J1132+0034_S_2017_10_21_pus_uvs.log on Sat May 11 20:57:36 2019 obs J1132+0034_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J1132+0034_S_2017_10_21_pus_uva.fits ! AN table 1: 294 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.992063 visibilities/baseline/integration-bin. ! Found source: J1132+0034 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 42000 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1132+0034_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 233 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 248 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1514 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.968746Jy sigma=0.009555 ! Fit after self-cal, rms=0.938654Jy sigma=0.009265 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.867 mas, bmaj=15.5 mas, bpa=-18.42 degrees ! Estimated noise=734.368 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0447792 Jy ! Component: 100 - total flux cleaned = 0.0615618 Jy ! Total flux subtracted in 100 components = 0.0615618 Jy ! Clean residual min=-0.008784 max=0.009620 Jy/beam ! Clean residual mean=0.000057 rms=0.002224 Jy/beam ! Combined flux in latest and established models = 0.0615618 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.0615618 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088666Jy sigma=0.000818 ! Fit after self-cal, rms=0.088366Jy sigma=0.000815 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.451 mas, bmaj=16.92 mas, bpa=-18.28 degrees ! Estimated noise=424.404 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0165357 Jy ! Component: 100 - total flux cleaned = 0.026404 Jy ! Component: 150 - total flux cleaned = 0.0331071 Jy ! Component: 200 - total flux cleaned = 0.0379542 Jy ! Total flux subtracted in 200 components = 0.0379542 Jy ! Clean residual min=-0.007944 max=0.011713 Jy/beam ! Clean residual mean=0.000054 rms=0.002626 Jy/beam ! Combined flux in latest and established models = 0.0995159 Jy ! Performing phase self-cal ! Adding 101 model components to the UV plane model. ! The established model now contains 110 components and 0.0995159 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084705Jy sigma=0.000781 ! Fit after self-cal, rms=0.084524Jy sigma=0.000779 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.91 HN 1.04 KP 1.23 ! LA 0.82 MK 1.20 NL 1.07 OV 1.24 ! PT 0.78 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.69 FD 0.91 HN 1.08 KP 1.22 ! LA 0.81 MK 1.14 NL 1.18 OV 1.18 ! PT 0.80 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.98 HN 1.04 KP 1.17 ! LA 0.66 MK 1.11 NL 1.39 OV 1.13 ! PT 0.79 ! ! ! Correcting IF 4. ! A total of 147 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.14 HN 0.80 KP 1.00* ! LA 0.71 MK 0.76 NL 1.00* OV 1.00* ! PT 0.62 ! ! ! Fit before self-cal, rms=0.084524Jy sigma=0.000779 ! Fit after self-cal, rms=0.083466Jy sigma=0.000760 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.539 mas, bmaj=17.59 mas, bpa=-18.1 degrees ! Estimated noise=428.573 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000886976 Jy ! Component: 100 - total flux cleaned = -0.000968347 Jy ! Component: 150 - total flux cleaned = -0.00111331 Jy ! Component: 200 - total flux cleaned = -0.00121068 Jy ! Total flux subtracted in 200 components = -0.00121068 Jy ! Clean residual min=-0.005920 max=0.009837 Jy/beam ! Clean residual mean=0.000025 rms=0.002043 Jy/beam ! Combined flux in latest and established models = 0.0983052 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 125 components and 0.0983052 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083421Jy sigma=0.000759 ! Fit after self-cal, rms=0.084065Jy sigma=0.000756 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084065Jy sigma=0.000756 ! Fit after self-cal, rms=0.090203Jy sigma=0.000751 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.521 mas, bmaj=18 mas, bpa=-18.15 degrees ! Estimated noise=431.069 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000831192 Jy ! Component: 100 - total flux cleaned = -0.00127451 Jy ! Component: 150 - total flux cleaned = -0.00162367 Jy ! Component: 200 - total flux cleaned = -0.00191535 Jy ! Total flux subtracted in 200 components = -0.00191535 Jy ! Clean residual min=-0.005659 max=0.009759 Jy/beam ! Clean residual mean=0.000017 rms=0.001921 Jy/beam ! Combined flux in latest and established models = 0.0963899 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 139 components and 0.0963899 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090139Jy sigma=0.000751 ! Fit after self-cal, rms=0.090594Jy sigma=0.000750 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (8, -40). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00933999 Jy ! Component: 100 - total flux cleaned = 0.0146607 Jy ! Component: 150 - total flux cleaned = 0.0181605 Jy ! Component: 200 - total flux cleaned = 0.0201587 Jy ! Total flux subtracted in 200 components = 0.0201587 Jy ! Clean residual min=-0.004211 max=0.004631 Jy/beam ! Clean residual mean=0.000010 rms=0.001326 Jy/beam ! Combined flux in latest and established models = 0.116549 Jy ! Performing phase self-cal ! Adding 73 model components to the UV plane model. ! The established model now contains 212 components and 0.116549 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089538Jy sigma=0.000738 ! Fit after self-cal, rms=0.088957Jy sigma=0.000735 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088957Jy sigma=0.000735 ! Fit after self-cal, rms=0.088880Jy sigma=0.000734 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.54 mas, bmaj=18.34 mas, bpa=-18.13 degrees ! Estimated noise=420.808 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00430809 Jy ! Component: 100 - total flux cleaned = 0.00593865 Jy ! Component: 150 - total flux cleaned = 0.00682985 Jy ! Component: 200 - total flux cleaned = 0.00736742 Jy ! Total flux subtracted in 200 components = 0.00736742 Jy ! Clean residual min=-0.003513 max=0.004036 Jy/beam ! Clean residual mean=0.000005 rms=0.001111 Jy/beam ! Combined flux in latest and established models = 0.123916 Jy selfcal ! Performing phase self-cal ! Adding 61 model components to the UV plane model. ! The established model now contains 256 components and 0.123916 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088612Jy sigma=0.000731 ! Fit after self-cal, rms=0.088538Jy sigma=0.000730 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00132723 Jy ! Component: 100 - total flux cleaned = 0.00203021 Jy ! Component: 150 - total flux cleaned = 0.0023542 Jy ! Component: 200 - total flux cleaned = 0.00254179 Jy ! Total flux subtracted in 200 components = 0.00254179 Jy ! Clean residual min=-0.003535 max=0.003854 Jy/beam ! Clean residual mean=0.000004 rms=0.001062 Jy/beam ! Combined flux in latest and established models = 0.126458 Jy ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 287 components and 0.126458 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088446Jy sigma=0.000730 ! Fit after self-cal, rms=0.088378Jy sigma=0.000729 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088378Jy sigma=0.000729 ! Fit after self-cal, rms=0.089526Jy sigma=0.000729 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.064 mas, bmaj=18.3 mas, bpa=-16.13 degrees ! Estimated noise=481.386 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00146105 Jy ! Component: 100 - total flux cleaned = 0.00208161 Jy ! Component: 150 - total flux cleaned = 0.00214416 Jy ! Component: 200 - total flux cleaned = 0.00196766 Jy ! Total flux subtracted in 200 components = 0.00196766 Jy ! Clean residual min=-0.004960 max=0.005427 Jy/beam ! Clean residual mean=0.000010 rms=0.001568 Jy/beam ! Combined flux in latest and established models = 0.128426 Jy selfcal ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 328 components and 0.128426 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089461Jy sigma=0.000728 ! Fit after self-cal, rms=0.089487Jy sigma=0.000728 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000789579 Jy ! Component: 100 - total flux cleaned = 0.000788052 Jy ! Component: 150 - total flux cleaned = 0.000641438 Jy ! Component: 200 - total flux cleaned = 0.000507335 Jy ! Total flux subtracted in 200 components = 0.000507335 Jy ! Clean residual min=-0.005009 max=0.005195 Jy/beam ! Clean residual mean=0.000008 rms=0.001539 Jy/beam ! Combined flux in latest and established models = 0.128933 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 346 components and 0.128933 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089459Jy sigma=0.000728 ! Fit after self-cal, rms=0.089422Jy sigma=0.000727 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.548 mas, bmaj=18.47 mas, bpa=-18.12 degrees ! Estimated noise=420.839 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.548 x 18.47 at -18.12 degrees (North through East) ! Clean map min=-0.0037456 max=0.058568 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.872 mas, bmaj=17.15 mas, bpa=-18.3 degrees ! Estimated noise=750.905 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0442403 Jy ! Component: 100 - total flux cleaned = 0.0622376 Jy ! Component: 150 - total flux cleaned = 0.0738934 Jy ! Component: 200 - total flux cleaned = 0.0827451 Jy ! Total flux subtracted in 200 components = 0.0827451 Jy ! Clean residual min=-0.005051 max=0.006020 Jy/beam ! Clean residual mean=0.000030 rms=0.001540 Jy/beam ! Combined flux in latest and established models = 0.0827451 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 36 model components to the UV plane model. ! The established model now contains 36 components and 0.0827451 Jy ! Inverting map and beam ! Estimated beam: bmin=3.548 mas, bmaj=18.47 mas, bpa=-18.12 degrees ! Estimated noise=420.839 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00950504 Jy ! Component: 100 - total flux cleaned = 0.0167453 Jy ! Component: 150 - total flux cleaned = 0.0225291 Jy ! Component: 200 - total flux cleaned = 0.0272771 Jy ! Total flux subtracted in 200 components = 0.0272771 Jy ! Clean residual min=-0.004448 max=0.005097 Jy/beam ! Clean residual mean=0.000018 rms=0.001456 Jy/beam ! Combined flux in latest and established models = 0.110022 Jy ! Adding 95 model components to the UV plane model. ! The established model now contains 121 components and 0.110022 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.064 mas, bmaj=18.3 mas, bpa=-16.13 degrees ! Estimated noise=481.386 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00539951 Jy ! Component: 100 - total flux cleaned = 0.0080609 Jy ! Component: 150 - total flux cleaned = 0.0101985 Jy ! Component: 200 - total flux cleaned = 0.0118253 Jy ! Total flux subtracted in 200 components = 0.0118253 Jy ! Clean residual min=-0.005062 max=0.006170 Jy/beam ! Clean residual mean=0.000017 rms=0.001765 Jy/beam ! Combined flux in latest and established models = 0.121847 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00136081 Jy ! Component: 100 - total flux cleaned = 0.0024226 Jy ! Component: 150 - total flux cleaned = 0.00340153 Jy ! Component: 200 - total flux cleaned = 0.00405133 Jy ! Total flux subtracted in 200 components = 0.00405133 Jy ! Clean residual min=-0.004945 max=0.005547 Jy/beam ! Clean residual mean=0.000012 rms=0.001619 Jy/beam ! Combined flux in latest and established models = 0.125899 Jy ! Adding 131 model components to the UV plane model. ! The established model now contains 228 components and 0.125899 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.548 mas, bmaj=18.47 mas, bpa=-18.12 degrees ! Estimated noise=420.839 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00107859 Jy ! Component: 100 - total flux cleaned = 0.00160983 Jy ! Component: 150 - total flux cleaned = 0.0018332 Jy ! Component: 200 - total flux cleaned = 0.00198507 Jy ! Total flux subtracted in 200 components = 0.00198507 Jy ! Clean residual min=-0.003332 max=0.003947 Jy/beam ! Clean residual mean=0.000005 rms=0.001042 Jy/beam ! Combined flux in latest and established models = 0.127884 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 260 components and 0.127884 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089453Jy sigma=0.000728 ! Fit after self-cal, rms=0.089452Jy sigma=0.000728 wmodel J1132+0034_S_2017_10_21_pus_map.mod ! Writing 260 model components to file: J1132+0034_S_2017_10_21_pus_map.mod wobs J1132+0034_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J1132+0034_S_2017_10_21_pus_uvs.fits wwins J1132+0034_S_2017_10_21_pus_map.win ! wwins: Wrote 2 windows to J1132+0034_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00136611 Jy ! Component: 100 - total flux cleaned = 0.00202576 Jy ! Component: 150 - total flux cleaned = 0.00241477 Jy ! Component: 200 - total flux cleaned = 0.00267694 Jy ! Component: 250 - total flux cleaned = 0.00292692 Jy ! Component: 300 - total flux cleaned = 0.00320907 Jy ! Component: 350 - total flux cleaned = 0.00320887 Jy ! Component: 400 - total flux cleaned = 0.00329484 Jy ! Component: 450 - total flux cleaned = 0.00341764 Jy ! Component: 500 - total flux cleaned = 0.00349579 Jy ! Component: 550 - total flux cleaned = 0.0034966 Jy ! Component: 600 - total flux cleaned = 0.00360621 Jy ! Component: 650 - total flux cleaned = 0.00357043 Jy ! Component: 700 - total flux cleaned = 0.00357054 Jy ! Component: 750 - total flux cleaned = 0.00360344 Jy ! Component: 800 - total flux cleaned = 0.00357097 Jy ! Component: 850 - total flux cleaned = 0.00366488 Jy ! Component: 900 - total flux cleaned = 0.00366425 Jy ! Component: 950 - total flux cleaned = 0.00378357 Jy ! Component: 1000 - total flux cleaned = 0.00390036 Jy ! Component: 1050 - total flux cleaned = 0.0039849 Jy ! Component: 1100 - total flux cleaned = 0.00415172 Jy ! Component: 1150 - total flux cleaned = 0.00426 Jy ! Component: 1200 - total flux cleaned = 0.00431361 Jy ! Component: 1250 - total flux cleaned = 0.00446964 Jy ! Component: 1300 - total flux cleaned = 0.00462168 Jy ! Component: 1350 - total flux cleaned = 0.00469611 Jy ! Component: 1400 - total flux cleaned = 0.00484171 Jy ! Component: 1450 - total flux cleaned = 0.00500801 Jy ! Component: 1500 - total flux cleaned = 0.00517071 Jy ! Component: 1550 - total flux cleaned = 0.00530801 Jy ! Component: 1600 - total flux cleaned = 0.00550929 Jy ! Component: 1650 - total flux cleaned = 0.00566272 Jy ! Component: 1700 - total flux cleaned = 0.00587731 Jy ! Component: 1750 - total flux cleaned = 0.00598264 Jy ! Component: 1800 - total flux cleaned = 0.00608576 Jy ! Component: 1850 - total flux cleaned = 0.00624796 Jy ! Component: 1900 - total flux cleaned = 0.00638718 Jy ! Component: 1950 - total flux cleaned = 0.00648522 Jy ! Component: 2000 - total flux cleaned = 0.0066579 Jy ! Component: 2050 - total flux cleaned = 0.00677069 Jy ! Component: 2100 - total flux cleaned = 0.00686322 Jy ! Component: 2150 - total flux cleaned = 0.00697231 Jy ! Component: 2200 - total flux cleaned = 0.00704426 Jy ! Component: 2250 - total flux cleaned = 0.00718551 Jy ! Component: 2300 - total flux cleaned = 0.0072898 Jy ! Component: 2350 - total flux cleaned = 0.00747766 Jy ! Component: 2400 - total flux cleaned = 0.00751148 Jy ! Component: 2450 - total flux cleaned = 0.00764468 Jy ! Component: 2500 - total flux cleaned = 0.00777539 Jy ! Component: 2550 - total flux cleaned = 0.00788835 Jy ! Component: 2600 - total flux cleaned = 0.00800013 Jy ! Component: 2650 - total flux cleaned = 0.00814109 Jy ! Component: 2700 - total flux cleaned = 0.00826494 Jy ! Component: 2750 - total flux cleaned = 0.00837232 Jy ! Component: 2800 - total flux cleaned = 0.00847797 Jy ! Component: 2850 - total flux cleaned = 0.00859725 Jy ! Component: 2900 - total flux cleaned = 0.00872973 Jy ! Component: 2950 - total flux cleaned = 0.00884596 Jy ! Component: 3000 - total flux cleaned = 0.0089607 Jy ! Component: 3050 - total flux cleaned = 0.00910214 Jy ! Component: 3100 - total flux cleaned = 0.00919989 Jy ! Component: 3150 - total flux cleaned = 0.00928288 Jy ! Component: 3200 - total flux cleaned = 0.00940581 Jy ! Component: 3250 - total flux cleaned = 0.0095406 Jy ! Component: 3300 - total flux cleaned = 0.00960728 Jy ! Component: 3350 - total flux cleaned = 0.00965974 Jy ! Component: 3400 - total flux cleaned = 0.00975081 Jy ! Component: 3450 - total flux cleaned = 0.00976374 Jy ! Component: 3500 - total flux cleaned = 0.00980218 Jy ! Component: 3550 - total flux cleaned = 0.00987789 Jy ! Component: 3600 - total flux cleaned = 0.00991549 Jy ! Component: 3650 - total flux cleaned = 0.0099776 Jy ! Component: 3700 - total flux cleaned = 0.0100757 Jy ! Component: 3750 - total flux cleaned = 0.0101485 Jy ! Component: 3800 - total flux cleaned = 0.0102327 Jy ! Component: 3850 - total flux cleaned = 0.0102683 Jy ! Component: 3900 - total flux cleaned = 0.010351 Jy ! Component: 3950 - total flux cleaned = 0.0103744 Jy ! Component: 4000 - total flux cleaned = 0.010456 Jy ! Component: 4050 - total flux cleaned = 0.0105595 Jy ! Total flux subtracted in 4096 components = 0.0105936 Jy ! Clean residual min=-0.000765 max=0.000743 Jy/beam ! Clean residual mean=-0.000000 rms=0.000246 Jy/beam ! Combined flux in latest and established models = 0.138478 Jy keep ! Adding 466 model components to the UV plane model. ! The established model now contains 726 components and 0.138478 Jy ![Exited script file: muppet] wmap "J1132+0034_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.548 x 18.47 at -18.12 degrees (North through East) ! Clean map min=-0.0032911 max=0.057752 Jy/beam ! Writing clean map to FITS file: J1132+0034_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0577516 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000237047 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.23138 1.23138 2.46276 4.92552 9.85104 19.7021 39.4041 78.8083 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.057 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.548 x 18.47 at -18.12 degrees (North through East) ! Clean map min=-0.0032911 max=0.057752 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1132+0034_S_2017_10_21_pus_uvs.log closed on Sat May 11 20:57:43 2019