! Started logfile: J1132+0034_S_2017_09_26_pus_uvs.log on Sat May 11 13:01:02 2019 obs J1132+0034_S_2017_09_26_pus_uva.fits ! Reading UV FITS file: J1132+0034_S_2017_09_26_pus_uva.fits ! AN table 1: 295 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.775989 visibilities/baseline/integration-bin. ! Found source: J1132+0034 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 674 lines of history. ! ! Reading 32964 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1132+0034_S_2017_09_26_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 375 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 460 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 385 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1705 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.987241Jy sigma=0.007805 ! Fit after self-cal, rms=0.934735Jy sigma=0.007392 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.816 mas, bmaj=15.27 mas, bpa=-18.53 degrees ! Estimated noise=1493.29 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0492182 Jy ! Component: 100 - total flux cleaned = 0.0673942 Jy ! Total flux subtracted in 100 components = 0.0673942 Jy ! Clean residual min=-0.007283 max=0.010392 Jy/beam ! Clean residual mean=-0.000100 rms=0.002379 Jy/beam ! Combined flux in latest and established models = 0.0673942 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.0673942 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097509Jy sigma=0.000726 ! Fit after self-cal, rms=0.096727Jy sigma=0.000720 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.401 mas, bmaj=18.98 mas, bpa=-18.63 degrees ! Estimated noise=584.305 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0175677 Jy ! Component: 100 - total flux cleaned = 0.0274199 Jy ! Component: 150 - total flux cleaned = 0.0337535 Jy ! Component: 200 - total flux cleaned = 0.0385849 Jy ! Total flux subtracted in 200 components = 0.0385849 Jy ! Clean residual min=-0.008182 max=0.013662 Jy/beam ! Clean residual mean=-0.000244 rms=0.003052 Jy/beam ! Combined flux in latest and established models = 0.105979 Jy ! Performing phase self-cal ! Adding 68 model components to the UV plane model. ! The established model now contains 81 components and 0.105979 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093540Jy sigma=0.000691 ! Fit after self-cal, rms=0.093376Jy sigma=0.000689 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.81 FD 1.02 HN 1.00 KP 1.02 ! LA 0.85 MK 1.11 NL 1.15 OV 1.28 ! PT 0.78 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 1.08 KP 1.05 ! LA 0.80 MK 1.15 NL 1.32 OV 1.35 ! PT 0.79 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.86 FD 1.06 HN 1.07 KP 1.04 ! LA 0.81 MK 1.21 NL 1.21 OV 1.30 ! PT 0.79 ! ! ! Correcting IF 4. ! A total of 165 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.29 HN 1.05 KP 1.00* ! LA 0.66 MK 0.89 NL 1.00* OV 1.71 ! PT 0.74 ! ! ! Fit before self-cal, rms=0.093376Jy sigma=0.000689 ! Fit after self-cal, rms=0.099204Jy sigma=0.000674 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.559 mas, bmaj=19.08 mas, bpa=-18.51 degrees ! Estimated noise=596.731 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00063621 Jy ! Component: 100 - total flux cleaned = -0.000773395 Jy ! Component: 150 - total flux cleaned = -0.000957701 Jy ! Component: 200 - total flux cleaned = -0.00106903 Jy ! Total flux subtracted in 200 components = -0.00106903 Jy ! Clean residual min=-0.006606 max=0.010740 Jy/beam ! Clean residual mean=-0.000101 rms=0.002318 Jy/beam ! Combined flux in latest and established models = 0.10491 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 88 components and 0.10491 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099094Jy sigma=0.000673 ! Fit after self-cal, rms=0.100069Jy sigma=0.000670 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100069Jy sigma=0.000670 ! Fit after self-cal, rms=0.111886Jy sigma=0.000664 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.522 mas, bmaj=19.19 mas, bpa=-18.27 degrees ! Estimated noise=601.979 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00105539 Jy ! Component: 100 - total flux cleaned = -0.00156182 Jy ! Component: 150 - total flux cleaned = -0.00192398 Jy ! Component: 200 - total flux cleaned = -0.0021807 Jy ! Total flux subtracted in 200 components = -0.0021807 Jy ! Clean residual min=-0.005320 max=0.010986 Jy/beam ! Clean residual mean=-0.000024 rms=0.001980 Jy/beam ! Combined flux in latest and established models = 0.102729 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 99 components and 0.102729 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111754Jy sigma=0.000665 ! Fit after self-cal, rms=0.112371Jy sigma=0.000664 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (8, -33). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00976893 Jy ! Component: 100 - total flux cleaned = 0.0147252 Jy ! Component: 150 - total flux cleaned = 0.0164185 Jy ! Component: 200 - total flux cleaned = 0.0174498 Jy ! Total flux subtracted in 200 components = 0.0174498 Jy ! Clean residual min=-0.003870 max=0.005024 Jy/beam ! Clean residual mean=-0.000004 rms=0.001333 Jy/beam ! Combined flux in latest and established models = 0.120179 Jy ! Performing phase self-cal ! Adding 60 model components to the UV plane model. ! The established model now contains 159 components and 0.120179 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111309Jy sigma=0.000655 ! Fit after self-cal, rms=0.110363Jy sigma=0.000653 ! Inverting map ! Added new window around map position (77, 67). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00565243 Jy ! Component: 100 - total flux cleaned = 0.00930609 Jy ! Component: 150 - total flux cleaned = 0.0114467 Jy ! Component: 200 - total flux cleaned = 0.012809 Jy ! Total flux subtracted in 200 components = 0.012809 Jy ! Clean residual min=-0.003753 max=0.004654 Jy/beam ! Clean residual mean=-0.000030 rms=0.001139 Jy/beam ! Combined flux in latest and established models = 0.132988 Jy ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 199 components and 0.132988 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109820Jy sigma=0.000650 ! Fit after self-cal, rms=0.109442Jy sigma=0.000650 ! Inverting map ! Added new window around map position (-64, 38.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00491071 Jy ! Component: 100 - total flux cleaned = 0.00617445 Jy ! Component: 150 - total flux cleaned = 0.00687805 Jy ! Component: 200 - total flux cleaned = 0.00763082 Jy ! Total flux subtracted in 200 components = 0.00763082 Jy ! Clean residual min=-0.003369 max=0.003554 Jy/beam ! Clean residual mean=-0.000004 rms=0.000980 Jy/beam ! Combined flux in latest and established models = 0.140619 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 244 components and 0.140619 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109008Jy sigma=0.000647 ! Fit after self-cal, rms=0.108723Jy sigma=0.000647 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108723Jy sigma=0.000647 ! Fit after self-cal, rms=0.103659Jy sigma=0.000645 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.544 mas, bmaj=19.14 mas, bpa=-18.23 degrees ! Estimated noise=583.768 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00351453 Jy ! Component: 100 - total flux cleaned = 0.00521344 Jy ! Component: 150 - total flux cleaned = 0.00594614 Jy ! Component: 200 - total flux cleaned = 0.00627877 Jy ! Total flux subtracted in 200 components = 0.00627877 Jy ! Clean residual min=-0.002462 max=0.003151 Jy/beam ! Clean residual mean=0.000006 rms=0.000768 Jy/beam ! Combined flux in latest and established models = 0.146898 Jy selfcal ! Performing phase self-cal ! Adding 56 model components to the UV plane model. ! The established model now contains 288 components and 0.146898 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103414Jy sigma=0.000644 ! Fit after self-cal, rms=0.103108Jy sigma=0.000643 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00113146 Jy ! Component: 100 - total flux cleaned = 0.00172911 Jy ! Component: 150 - total flux cleaned = 0.002198 Jy ! Component: 200 - total flux cleaned = 0.00263334 Jy ! Total flux subtracted in 200 components = 0.00263334 Jy ! Clean residual min=-0.002474 max=0.002926 Jy/beam ! Clean residual mean=0.000004 rms=0.000741 Jy/beam ! Combined flux in latest and established models = 0.149531 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 309 components and 0.149531 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102948Jy sigma=0.000642 ! Fit after self-cal, rms=0.102821Jy sigma=0.000642 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102821Jy sigma=0.000642 ! Fit after self-cal, rms=0.101289Jy sigma=0.000642 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.643 mas, bmaj=19.36 mas, bpa=-16.1 degrees ! Estimated noise=665.775 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00213022 Jy ! Component: 100 - total flux cleaned = 0.00302814 Jy ! Component: 150 - total flux cleaned = 0.00341583 Jy ! Component: 200 - total flux cleaned = 0.00390105 Jy ! Total flux subtracted in 200 components = 0.00390105 Jy ! Clean residual min=-0.002847 max=0.003661 Jy/beam ! Clean residual mean=0.000003 rms=0.000891 Jy/beam ! Combined flux in latest and established models = 0.153432 Jy selfcal ! Performing phase self-cal ! Adding 56 model components to the UV plane model. ! The established model now contains 356 components and 0.153432 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101177Jy sigma=0.000641 ! Fit after self-cal, rms=0.101066Jy sigma=0.000641 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000764731 Jy ! Component: 100 - total flux cleaned = 0.00129518 Jy ! Component: 150 - total flux cleaned = 0.00165485 Jy ! Component: 200 - total flux cleaned = 0.00182145 Jy ! Total flux subtracted in 200 components = 0.00182145 Jy ! Clean residual min=-0.002723 max=0.003425 Jy/beam ! Clean residual mean=0.000003 rms=0.000859 Jy/beam ! Combined flux in latest and established models = 0.155254 Jy ! Performing phase self-cal ! Adding 53 model components to the UV plane model. ! The established model now contains 386 components and 0.155253 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101001Jy sigma=0.000641 ! Fit after self-cal, rms=0.100944Jy sigma=0.000640 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.56 mas, bmaj=19.08 mas, bpa=-18.23 degrees ! Estimated noise=579.565 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.56 x 19.08 at -18.23 degrees (North through East) ! Clean map min=-0.0047377 max=0.064095 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.848 mas, bmaj=15.9 mas, bpa=-18.19 degrees ! Estimated noise=1535.61 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0510141 Jy ! Component: 100 - total flux cleaned = 0.0709365 Jy ! Component: 150 - total flux cleaned = 0.0839947 Jy ! Component: 200 - total flux cleaned = 0.094215 Jy ! Total flux subtracted in 200 components = 0.094215 Jy ! Clean residual min=-0.007775 max=0.008163 Jy/beam ! Clean residual mean=-0.000026 rms=0.002032 Jy/beam ! Combined flux in latest and established models = 0.0942151 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 37 model components to the UV plane model. ! The established model now contains 37 components and 0.0942151 Jy ! Inverting map and beam ! Estimated beam: bmin=3.56 mas, bmaj=19.08 mas, bpa=-18.23 degrees ! Estimated noise=579.565 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.01065 Jy ! Component: 100 - total flux cleaned = 0.0191525 Jy ! Component: 150 - total flux cleaned = 0.0260944 Jy ! Component: 200 - total flux cleaned = 0.0317011 Jy ! Total flux subtracted in 200 components = 0.0317011 Jy ! Clean residual min=-0.004872 max=0.005654 Jy/beam ! Clean residual mean=-0.000033 rms=0.001435 Jy/beam ! Combined flux in latest and established models = 0.125916 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 83 components and 0.125916 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.643 mas, bmaj=19.36 mas, bpa=-16.1 degrees ! Estimated noise=665.775 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00729739 Jy ! Component: 100 - total flux cleaned = 0.0125245 Jy ! Component: 150 - total flux cleaned = 0.0150039 Jy ! Component: 200 - total flux cleaned = 0.0165107 Jy ! Total flux subtracted in 200 components = 0.0165107 Jy ! Clean residual min=-0.004982 max=0.005942 Jy/beam ! Clean residual mean=-0.000001 rms=0.001419 Jy/beam ! Combined flux in latest and established models = 0.142427 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00149518 Jy ! Component: 100 - total flux cleaned = 0.00271589 Jy ! Component: 150 - total flux cleaned = 0.00383452 Jy ! Component: 200 - total flux cleaned = 0.00485771 Jy ! Total flux subtracted in 200 components = 0.00485771 Jy ! Clean residual min=-0.004083 max=0.004965 Jy/beam ! Clean residual mean=0.000006 rms=0.001146 Jy/beam ! Combined flux in latest and established models = 0.147285 Jy ! Adding 101 model components to the UV plane model. ! The established model now contains 179 components and 0.147285 Jy ! Inverting map ! Added new window around map position (-14, -3.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00301963 Jy ! Component: 100 - total flux cleaned = 0.00390426 Jy ! Component: 150 - total flux cleaned = 0.00456814 Jy ! Component: 200 - total flux cleaned = 0.00507235 Jy ! Total flux subtracted in 200 components = 0.00507235 Jy ! Clean residual min=-0.002992 max=0.002825 Jy/beam ! Clean residual mean=0.000016 rms=0.000847 Jy/beam ! Combined flux in latest and established models = 0.152357 Jy ! Adding 59 model components to the UV plane model. ! The established model now contains 238 components and 0.152357 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.56 mas, bmaj=19.08 mas, bpa=-18.23 degrees ! Estimated noise=579.565 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000277526 Jy ! Component: 100 - total flux cleaned = 0.000307778 Jy ! Component: 150 - total flux cleaned = 0.000481213 Jy ! Component: 200 - total flux cleaned = 0.00064229 Jy ! Total flux subtracted in 200 components = 0.00064229 Jy ! Clean residual min=-0.002434 max=0.002180 Jy/beam ! Clean residual mean=0.000007 rms=0.000621 Jy/beam ! Combined flux in latest and established models = 0.152999 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 269 components and 0.152999 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101020Jy sigma=0.000641 ! Fit after self-cal, rms=0.100963Jy sigma=0.000640 wmodel J1132+0034_S_2017_09_26_pus_map.mod ! Writing 269 model components to file: J1132+0034_S_2017_09_26_pus_map.mod wobs J1132+0034_S_2017_09_26_pus_uvs.fits ! Writing UV FITS file: J1132+0034_S_2017_09_26_pus_uvs.fits wwins J1132+0034_S_2017_09_26_pus_map.win ! wwins: Wrote 5 windows to J1132+0034_S_2017_09_26_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -1.36415e-05 Jy ! Component: 100 - total flux cleaned = -1.36526e-05 Jy ! Component: 150 - total flux cleaned = 0.000124835 Jy ! Component: 200 - total flux cleaned = 0.000189082 Jy ! Component: 250 - total flux cleaned = 0.000251331 Jy ! Component: 300 - total flux cleaned = 0.000457671 Jy ! Component: 350 - total flux cleaned = 0.000685129 Jy ! Component: 400 - total flux cleaned = 0.000931333 Jy ! Component: 450 - total flux cleaned = 0.00111573 Jy ! Component: 500 - total flux cleaned = 0.00126912 Jy ! Component: 550 - total flux cleaned = 0.00141826 Jy ! Component: 600 - total flux cleaned = 0.00165904 Jy ! Component: 650 - total flux cleaned = 0.0018694 Jy ! Component: 700 - total flux cleaned = 0.00205153 Jy ! Component: 750 - total flux cleaned = 0.00216242 Jy ! Component: 800 - total flux cleaned = 0.00220578 Jy ! Component: 850 - total flux cleaned = 0.00231203 Jy ! Component: 900 - total flux cleaned = 0.0023739 Jy ! Component: 950 - total flux cleaned = 0.00239376 Jy ! Component: 1000 - total flux cleaned = 0.00243313 Jy ! Component: 1050 - total flux cleaned = 0.00245241 Jy ! Component: 1100 - total flux cleaned = 0.00245229 Jy ! Component: 1150 - total flux cleaned = 0.00245218 Jy ! Component: 1200 - total flux cleaned = 0.00248827 Jy ! Component: 1250 - total flux cleaned = 0.00248774 Jy ! Component: 1300 - total flux cleaned = 0.00248741 Jy ! Component: 1350 - total flux cleaned = 0.00246999 Jy ! Component: 1400 - total flux cleaned = 0.00250365 Jy ! Component: 1450 - total flux cleaned = 0.00248729 Jy ! Component: 1500 - total flux cleaned = 0.00250355 Jy ! Component: 1550 - total flux cleaned = 0.00250329 Jy ! Component: 1600 - total flux cleaned = 0.0024868 Jy ! Component: 1650 - total flux cleaned = 0.0024558 Jy ! Component: 1700 - total flux cleaned = 0.00242524 Jy ! Component: 1750 - total flux cleaned = 0.00242522 Jy ! Component: 1800 - total flux cleaned = 0.00243986 Jy ! Component: 1850 - total flux cleaned = 0.0023956 Jy ! Component: 1900 - total flux cleaned = 0.00235225 Jy ! Component: 1950 - total flux cleaned = 0.00229554 Jy ! Component: 2000 - total flux cleaned = 0.00223958 Jy ! Component: 2050 - total flux cleaned = 0.00214305 Jy ! Component: 2100 - total flux cleaned = 0.00206143 Jy ! Component: 2150 - total flux cleaned = 0.00199439 Jy ! Component: 2200 - total flux cleaned = 0.00198103 Jy ! Component: 2250 - total flux cleaned = 0.00192815 Jy ! Component: 2300 - total flux cleaned = 0.00186345 Jy ! Component: 2350 - total flux cleaned = 0.00182511 Jy ! Component: 2400 - total flux cleaned = 0.00181237 Jy ! Component: 2450 - total flux cleaned = 0.00174992 Jy ! Component: 2500 - total flux cleaned = 0.00171289 Jy ! Component: 2550 - total flux cleaned = 0.00170059 Jy ! Component: 2600 - total flux cleaned = 0.00161596 Jy ! Component: 2650 - total flux cleaned = 0.00161605 Jy ! Component: 2700 - total flux cleaned = 0.0015568 Jy ! Component: 2750 - total flux cleaned = 0.00150999 Jy ! Component: 2800 - total flux cleaned = 0.00147532 Jy ! Component: 2850 - total flux cleaned = 0.00149841 Jy ! Component: 2900 - total flux cleaned = 0.00146409 Jy ! Component: 2950 - total flux cleaned = 0.00144142 Jy ! Component: 3000 - total flux cleaned = 0.00143011 Jy ! Component: 3050 - total flux cleaned = 0.00139679 Jy ! Component: 3100 - total flux cleaned = 0.00137482 Jy ! Component: 3150 - total flux cleaned = 0.00138568 Jy ! Component: 3200 - total flux cleaned = 0.00136409 Jy ! Component: 3250 - total flux cleaned = 0.00135352 Jy ! Component: 3300 - total flux cleaned = 0.00134294 Jy ! Component: 3350 - total flux cleaned = 0.00135348 Jy ! Component: 3400 - total flux cleaned = 0.00136387 Jy ! Component: 3450 - total flux cleaned = 0.0013535 Jy ! Component: 3500 - total flux cleaned = 0.00133299 Jy ! Component: 3550 - total flux cleaned = 0.00132271 Jy ! Component: 3600 - total flux cleaned = 0.00131251 Jy ! Component: 3650 - total flux cleaned = 0.00129246 Jy ! Component: 3700 - total flux cleaned = 0.00128253 Jy ! Component: 3750 - total flux cleaned = 0.00124283 Jy ! Component: 3800 - total flux cleaned = 0.00122315 Jy ! Component: 3850 - total flux cleaned = 0.00122319 Jy ! Component: 3900 - total flux cleaned = 0.00122318 Jy ! Component: 3950 - total flux cleaned = 0.0012328 Jy ! Component: 4000 - total flux cleaned = 0.00124242 Jy ! Component: 4050 - total flux cleaned = 0.00120413 Jy ! Total flux subtracted in 4096 components = 0.0012327 Jy ! Clean residual min=-0.000498 max=0.000563 Jy/beam ! Clean residual mean=0.000000 rms=0.000187 Jy/beam ! Combined flux in latest and established models = 0.154232 Jy keep ! Adding 329 model components to the UV plane model. ! The established model now contains 598 components and 0.154232 Jy ![Exited script file: muppet] wmap "J1132+0034_S_2017_09_26_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.56 x 19.08 at -18.23 degrees (North through East) ! Clean map min=-0.0036272 max=0.062723 Jy/beam ! Writing clean map to FITS file: J1132+0034_S_2017_09_26_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0627232 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000182637 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.87354 0.87354 1.74708 3.49416 6.98832 13.9766 27.9533 55.9066 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.062 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.56 x 19.08 at -18.23 degrees (North through East) ! Clean map min=-0.0036272 max=0.062723 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1132+0034_S_2017_09_26_pus_uvs.log closed on Sat May 11 13:01:09 2019