! Started logfile: J1131-1628_S_2017_05_31_pus_uvs.log on Tue Feb 5 21:46:53 2019 obs J1131-1628_S_2017_05_31_pus_uva.fits ! Reading UV FITS file: J1131-1628_S_2017_05_31_pus_uva.fits ! AN table 1: 96 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.734491 visibilities/baseline/integration-bin. ! Found source: J1131-1628 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 703 lines of history. ! ! Reading 12692 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1131-1628_S_2017_05_31_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 136 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 204 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 204 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 548 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.935190Jy sigma=0.006678 ! Fit after self-cal, rms=0.904984Jy sigma=0.006550 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.077 mas, bmaj=6.787 mas, bpa=1.631 degrees ! Estimated noise=1854.93 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.077679 Jy ! Component: 100 - total flux cleaned = 0.0950734 Jy ! Total flux subtracted in 100 components = 0.0950734 Jy ! Clean residual min=-0.005520 max=0.006247 Jy/beam ! Clean residual mean=-0.000006 rms=0.001359 Jy/beam ! Combined flux in latest and established models = 0.0950734 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.0950734 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129247Jy sigma=0.000665 ! Fit after self-cal, rms=0.129189Jy sigma=0.000665 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.79 mas, bmaj=8.261 mas, bpa=2.505 degrees ! Estimated noise=1054.14 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00720527 Jy ! Component: 100 - total flux cleaned = 0.0102957 Jy ! Component: 150 - total flux cleaned = 0.0109212 Jy ! Component: 200 - total flux cleaned = 0.0112451 Jy ! Total flux subtracted in 200 components = 0.0112451 Jy ! Clean residual min=-0.003780 max=0.003500 Jy/beam ! Clean residual mean=0.000003 rms=0.000845 Jy/beam ! Combined flux in latest and established models = 0.106318 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 17 components and 0.106319 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128600Jy sigma=0.000662 ! Fit after self-cal, rms=0.128608Jy sigma=0.000662 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 0.93 HN 1.04 KP 1.04 ! LA 0.98 MK 1.13 NL 0.93 OV 0.98 ! PT 1.02 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.91 HN 1.06 KP 1.03 ! LA 0.96 MK 0.82 NL 1.07 OV 1.02 ! PT 1.09 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 1.07 KP 0.99 ! LA 0.98 MK 1.03 NL 1.04 OV 0.96 ! PT 1.06 SC 0.99 ! ! ! Correcting IF 4. ! A total of 111 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.08 HN 0.99 KP 1.09 ! LA 0.76 MK 1.44 NL 1.00* OV 1.00* ! PT 0.97 SC 1.00* ! ! ! Fit before self-cal, rms=0.128608Jy sigma=0.000662 ! Fit after self-cal, rms=0.131106Jy sigma=0.000661 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.798 mas, bmaj=8.297 mas, bpa=3.075 degrees ! Estimated noise=1059.41 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000449988 Jy ! Component: 100 - total flux cleaned = -0.00044917 Jy ! Component: 150 - total flux cleaned = -0.000448719 Jy ! Component: 200 - total flux cleaned = -0.000498613 Jy ! Total flux subtracted in 200 components = -0.000498613 Jy ! Clean residual min=-0.002771 max=0.003120 Jy/beam ! Clean residual mean=0.000017 rms=0.000726 Jy/beam ! Combined flux in latest and established models = 0.10582 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 26 components and 0.10582 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130949Jy sigma=0.000661 ! Fit after self-cal, rms=0.131004Jy sigma=0.000661 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131004Jy sigma=0.000661 ! Fit after self-cal, rms=0.135697Jy sigma=0.000660 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.806 mas, bmaj=8.331 mas, bpa=3.264 degrees ! Estimated noise=1062.04 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.00366e-05 Jy ! Component: 100 - total flux cleaned = 5.86689e-05 Jy ! Component: 150 - total flux cleaned = 5.89485e-05 Jy ! Component: 200 - total flux cleaned = 0.000100717 Jy ! Total flux subtracted in 200 components = 0.000100717 Jy ! Clean residual min=-0.002424 max=0.002646 Jy/beam ! Clean residual mean=0.000013 rms=0.000623 Jy/beam ! Combined flux in latest and established models = 0.105921 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 30 components and 0.105921 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135593Jy sigma=0.000660 ! Fit after self-cal, rms=0.135681Jy sigma=0.000659 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (125.5, -83.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00197047 Jy ! Component: 100 - total flux cleaned = 0.00203974 Jy ! Component: 150 - total flux cleaned = 0.00209225 Jy ! Component: 200 - total flux cleaned = 0.00209339 Jy ! Total flux subtracted in 200 components = 0.00209339 Jy ! Clean residual min=-0.002289 max=0.002389 Jy/beam ! Clean residual mean=0.000010 rms=0.000578 Jy/beam ! Combined flux in latest and established models = 0.108014 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 48 components and 0.108014 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135563Jy sigma=0.000659 ! Fit after self-cal, rms=0.135556Jy sigma=0.000659 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135556Jy sigma=0.000659 ! Fit after self-cal, rms=0.139045Jy sigma=0.000659 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.817 mas, bmaj=8.371 mas, bpa=3.584 degrees ! Estimated noise=1065.46 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000988502 Jy ! Component: 100 - total flux cleaned = 0.000987529 Jy ! Component: 150 - total flux cleaned = 0.00103457 Jy ! Component: 200 - total flux cleaned = 0.00107704 Jy ! Total flux subtracted in 200 components = 0.00107704 Jy ! Clean residual min=-0.002289 max=0.002203 Jy/beam ! Clean residual mean=0.000011 rms=0.000571 Jy/beam ! Combined flux in latest and established models = 0.109091 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 49 components and 0.109091 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138942Jy sigma=0.000659 ! Fit after self-cal, rms=0.138970Jy sigma=0.000659 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000200609 Jy ! Component: 100 - total flux cleaned = 0.000242715 Jy ! Component: 150 - total flux cleaned = 0.000244226 Jy ! Component: 200 - total flux cleaned = 0.000281184 Jy ! Total flux subtracted in 200 components = 0.000281184 Jy ! Clean residual min=-0.002219 max=0.002133 Jy/beam ! Clean residual mean=0.000011 rms=0.000559 Jy/beam ! Combined flux in latest and established models = 0.109372 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 51 components and 0.109372 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138898Jy sigma=0.000659 ! Fit after self-cal, rms=0.138897Jy sigma=0.000659 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138897Jy sigma=0.000659 ! Fit after self-cal, rms=0.141846Jy sigma=0.000659 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.684 mas, bmaj=16.16 mas, bpa=-0.6946 degrees ! Estimated noise=1229.83 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000434942 Jy ! Component: 100 - total flux cleaned = 0.000553509 Jy ! Component: 150 - total flux cleaned = 0.000601707 Jy ! Component: 200 - total flux cleaned = 0.000587978 Jy ! Total flux subtracted in 200 components = 0.000587978 Jy ! Clean residual min=-0.001737 max=0.001912 Jy/beam ! Clean residual mean=0.000020 rms=0.000538 Jy/beam ! Combined flux in latest and established models = 0.10996 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 58 components and 0.10996 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141824Jy sigma=0.000659 ! Fit after self-cal, rms=0.141852Jy sigma=0.000659 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000106209 Jy ! Component: 100 - total flux cleaned = 7.85717e-05 Jy ! Component: 150 - total flux cleaned = 5.25171e-05 Jy ! Component: 200 - total flux cleaned = 5.1861e-06 Jy ! Total flux subtracted in 200 components = 5.1861e-06 Jy ! Clean residual min=-0.001709 max=0.001909 Jy/beam ! Clean residual mean=0.000019 rms=0.000534 Jy/beam ! Combined flux in latest and established models = 0.109965 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 62 components and 0.109965 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141837Jy sigma=0.000659 ! Fit after self-cal, rms=0.141836Jy sigma=0.000659 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.826 mas, bmaj=8.405 mas, bpa=3.834 degrees ! Estimated noise=1068.72 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.826 x 8.405 at 3.834 degrees (North through East) ! Clean map min=-0.0025402 max=0.10011 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.132 mas, bmaj=6.987 mas, bpa=3.478 degrees ! Estimated noise=1891.08 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0790915 Jy ! Component: 100 - total flux cleaned = 0.0971446 Jy ! Component: 150 - total flux cleaned = 0.103912 Jy ! Component: 200 - total flux cleaned = 0.105534 Jy ! Total flux subtracted in 200 components = 0.105534 Jy ! Clean residual min=-0.004546 max=0.004301 Jy/beam ! Clean residual mean=0.000002 rms=0.001165 Jy/beam ! Combined flux in latest and established models = 0.105534 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.105534 Jy ! Inverting map and beam ! Estimated beam: bmin=3.826 mas, bmaj=8.405 mas, bpa=3.834 degrees ! Estimated noise=1068.72 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.5, -10). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00365398 Jy ! Component: 100 - total flux cleaned = 0.00417746 Jy ! Component: 150 - total flux cleaned = 0.00436526 Jy ! Component: 200 - total flux cleaned = 0.00453514 Jy ! Total flux subtracted in 200 components = 0.00453514 Jy ! Clean residual min=-0.002670 max=0.002206 Jy/beam ! Clean residual mean=0.000011 rms=0.000613 Jy/beam ! Combined flux in latest and established models = 0.110069 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 33 components and 0.110069 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.684 mas, bmaj=16.16 mas, bpa=-0.6946 degrees ! Estimated noise=1229.83 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000497854 Jy ! Component: 100 - total flux cleaned = 0.000760507 Jy ! Component: 150 - total flux cleaned = 0.000820289 Jy ! Component: 200 - total flux cleaned = 0.000845071 Jy ! Total flux subtracted in 200 components = 0.000845071 Jy ! Clean residual min=-0.001690 max=0.001862 Jy/beam ! Clean residual mean=0.000020 rms=0.000510 Jy/beam ! Combined flux in latest and established models = 0.110914 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.17952e-05 Jy ! Component: 100 - total flux cleaned = -6.28838e-05 Jy ! Component: 150 - total flux cleaned = -8.17397e-05 Jy ! Component: 200 - total flux cleaned = -0.000100087 Jy ! Total flux subtracted in 200 components = -0.000100087 Jy ! Clean residual min=-0.001594 max=0.001838 Jy/beam ! Clean residual mean=0.000020 rms=0.000500 Jy/beam ! Combined flux in latest and established models = 0.110814 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 55 components and 0.110814 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.826 mas, bmaj=8.405 mas, bpa=3.834 degrees ! Estimated noise=1068.72 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.61705e-07 Jy ! Component: 100 - total flux cleaned = 2.11093e-06 Jy ! Component: 150 - total flux cleaned = 6.68821e-05 Jy ! Component: 200 - total flux cleaned = 0.000126426 Jy ! Total flux subtracted in 200 components = 0.000126426 Jy ! Clean residual min=-0.002424 max=0.002115 Jy/beam ! Clean residual mean=0.000010 rms=0.000555 Jy/beam ! Combined flux in latest and established models = 0.110941 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 63 components and 0.110941 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141926Jy sigma=0.000659 ! Fit after self-cal, rms=0.141918Jy sigma=0.000659 wmodel J1131-1628_S_2017_05_31_pus_map.mod ! Writing 63 model components to file: J1131-1628_S_2017_05_31_pus_map.mod wobs J1131-1628_S_2017_05_31_pus_uvs.fits ! Writing UV FITS file: J1131-1628_S_2017_05_31_pus_uvs.fits wwins J1131-1628_S_2017_05_31_pus_map.win ! wwins: Wrote 3 windows to J1131-1628_S_2017_05_31_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000553639 Jy ! Component: 100 - total flux cleaned = -0.000735681 Jy ! Component: 150 - total flux cleaned = -0.000979519 Jy ! Component: 200 - total flux cleaned = -0.00124466 Jy ! Component: 250 - total flux cleaned = -0.00130927 Jy ! Component: 300 - total flux cleaned = -0.00155742 Jy ! Component: 350 - total flux cleaned = -0.00170828 Jy ! Component: 400 - total flux cleaned = -0.00182533 Jy ! Component: 450 - total flux cleaned = -0.00196792 Jy ! Component: 500 - total flux cleaned = -0.00199581 Jy ! Component: 550 - total flux cleaned = -0.00207744 Jy ! Component: 600 - total flux cleaned = -0.00207656 Jy ! Component: 650 - total flux cleaned = -0.00215454 Jy ! Component: 700 - total flux cleaned = -0.00220594 Jy ! Component: 750 - total flux cleaned = -0.00220659 Jy ! Component: 800 - total flux cleaned = -0.00230562 Jy ! Component: 850 - total flux cleaned = -0.00225726 Jy ! Component: 900 - total flux cleaned = -0.00235372 Jy ! Component: 950 - total flux cleaned = -0.00242511 Jy ! Component: 1000 - total flux cleaned = -0.00247162 Jy ! Component: 1050 - total flux cleaned = -0.00263341 Jy ! Component: 1100 - total flux cleaned = -0.00272423 Jy ! Component: 1150 - total flux cleaned = -0.00272397 Jy ! Component: 1200 - total flux cleaned = -0.00281298 Jy ! Component: 1250 - total flux cleaned = -0.00296683 Jy ! Component: 1300 - total flux cleaned = -0.003032 Jy ! Component: 1350 - total flux cleaned = -0.00316126 Jy ! Component: 1400 - total flux cleaned = -0.00324625 Jy ! Component: 1450 - total flux cleaned = -0.00335168 Jy ! Component: 1500 - total flux cleaned = -0.00345584 Jy ! Component: 1550 - total flux cleaned = -0.0035382 Jy ! Component: 1600 - total flux cleaned = -0.00361993 Jy ! Component: 1650 - total flux cleaned = -0.00370077 Jy ! Component: 1700 - total flux cleaned = -0.00380071 Jy ! Component: 1750 - total flux cleaned = -0.00389949 Jy ! Component: 1800 - total flux cleaned = -0.00393861 Jy ! Component: 1850 - total flux cleaned = -0.00405524 Jy ! Component: 1900 - total flux cleaned = -0.00413174 Jy ! Component: 1950 - total flux cleaned = -0.0041698 Jy ! Component: 2000 - total flux cleaned = -0.00418852 Jy ! Component: 2050 - total flux cleaned = -0.00428207 Jy ! Component: 2100 - total flux cleaned = -0.00430062 Jy ! Component: 2150 - total flux cleaned = -0.0043373 Jy ! Component: 2200 - total flux cleaned = -0.00437402 Jy ! Component: 2250 - total flux cleaned = -0.00446446 Jy ! Component: 2300 - total flux cleaned = -0.0044645 Jy ! Component: 2350 - total flux cleaned = -0.00448235 Jy ! Component: 2400 - total flux cleaned = -0.00453534 Jy ! Component: 2450 - total flux cleaned = -0.00455281 Jy ! Component: 2500 - total flux cleaned = -0.00446604 Jy ! Component: 2550 - total flux cleaned = -0.00444893 Jy ! Component: 2600 - total flux cleaned = -0.00441472 Jy ! Component: 2650 - total flux cleaned = -0.00441464 Jy ! Component: 2700 - total flux cleaned = -0.00439756 Jy ! Component: 2750 - total flux cleaned = -0.00436417 Jy ! Component: 2800 - total flux cleaned = -0.00436439 Jy ! Component: 2850 - total flux cleaned = -0.00434799 Jy ! Component: 2900 - total flux cleaned = -0.00434795 Jy ! Component: 2950 - total flux cleaned = -0.00438048 Jy ! Component: 3000 - total flux cleaned = -0.00436434 Jy ! Component: 3050 - total flux cleaned = -0.00436429 Jy ! Component: 3100 - total flux cleaned = -0.00428427 Jy ! Component: 3150 - total flux cleaned = -0.00425276 Jy ! Component: 3200 - total flux cleaned = -0.00422128 Jy ! Component: 3250 - total flux cleaned = -0.00425262 Jy ! Component: 3300 - total flux cleaned = -0.00417448 Jy ! Component: 3350 - total flux cleaned = -0.00412791 Jy ! Component: 3400 - total flux cleaned = -0.00414334 Jy ! Component: 3450 - total flux cleaned = -0.00409721 Jy ! Component: 3500 - total flux cleaned = -0.00406666 Jy ! Component: 3550 - total flux cleaned = -0.00402109 Jy ! Component: 3600 - total flux cleaned = -0.0039908 Jy ! Component: 3650 - total flux cleaned = -0.00390067 Jy ! Component: 3700 - total flux cleaned = -0.00385581 Jy ! Component: 3750 - total flux cleaned = -0.00375175 Jy ! Component: 3800 - total flux cleaned = -0.00372223 Jy ! Component: 3850 - total flux cleaned = -0.00363386 Jy ! Component: 3900 - total flux cleaned = -0.0035897 Jy ! Component: 3950 - total flux cleaned = -0.00347314 Jy ! Component: 4000 - total flux cleaned = -0.00341517 Jy ! Component: 4050 - total flux cleaned = -0.0033286 Jy ! Total flux subtracted in 4096 components = -0.00322802 Jy ! Clean residual min=-0.000835 max=0.000919 Jy/beam ! Clean residual mean=0.000002 rms=0.000253 Jy/beam ! Combined flux in latest and established models = 0.107713 Jy keep ! Adding 229 model components to the UV plane model. ! The established model now contains 289 components and 0.107713 Jy ![Exited script file: muppet] wmap "J1131-1628_S_2017_05_31_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.826 x 8.405 at 3.834 degrees (North through East) ! Clean map min=-0.00231 max=0.10058 Jy/beam ! Writing clean map to FITS file: J1131-1628_S_2017_05_31_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.100578 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00024911 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.743033 0.743033 1.48607 2.97213 5.94427 11.8885 23.7771 47.5541 95.1083 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.1 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.826 x 8.405 at 3.834 degrees (North through East) ! Clean map min=-0.00231 max=0.10058 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1131-1628_S_2017_05_31_pus_uvs.log closed on Tue Feb 5 21:46:58 2019