! Started logfile: J1131+5128_S_2017_10_09_pus_uvs.log on Sun May 12 13:11:07 2019 obs J1131+5128_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J1131+5128_S_2017_10_09_pus_uva.fits ! AN table 1: 146 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.666096 visibilities/baseline/integration-bin. ! Found source: J1131+5128 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 14004 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1131+5128_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 232 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 348 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 232 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 759 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.896187Jy sigma=0.008145 ! Fit after self-cal, rms=0.885107Jy sigma=0.008054 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.259 mas, bmaj=5.423 mas, bpa=-53.35 degrees ! Estimated noise=1580.96 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0883323 Jy ! Component: 100 - total flux cleaned = 0.10863 Jy ! Total flux subtracted in 100 components = 0.10863 Jy ! Clean residual min=-0.005538 max=0.007395 Jy/beam ! Clean residual mean=-0.000014 rms=0.001540 Jy/beam ! Combined flux in latest and established models = 0.10863 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.10863 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082564Jy sigma=0.000676 ! Fit after self-cal, rms=0.082529Jy sigma=0.000675 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.091 mas, bmaj=6.124 mas, bpa=-54.52 degrees ! Estimated noise=773.353 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00962214 Jy ! Component: 100 - total flux cleaned = 0.0140549 Jy ! Component: 150 - total flux cleaned = 0.0162399 Jy ! Component: 200 - total flux cleaned = 0.0174036 Jy ! Total flux subtracted in 200 components = 0.0174036 Jy ! Clean residual min=-0.003720 max=0.004208 Jy/beam ! Clean residual mean=0.000006 rms=0.000884 Jy/beam ! Combined flux in latest and established models = 0.126033 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 29 components and 0.126033 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081227Jy sigma=0.000668 ! Fit after self-cal, rms=0.081190Jy sigma=0.000668 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.99 HN 1.01 KP 1.07 ! LA 1.02 MK 0.99 NL 0.89 OV 1.00* ! PT 1.04 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.06 HN 1.10 KP 1.02 ! LA 0.99 MK 0.98 NL 1.44 OV 1.00* ! PT 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.08 HN 1.05 KP 0.92 ! LA 0.78 MK 1.04 NL 1.11 OV 1.00* ! PT 0.98 ! ! ! Correcting IF 4. ! A total of 51 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.10 HN 0.94 KP 1.00* ! LA 0.76 MK 1.11 NL 1.00* OV 1.00* ! PT 1.11 ! ! ! Fit before self-cal, rms=0.081190Jy sigma=0.000668 ! Fit after self-cal, rms=0.078255Jy sigma=0.000658 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.12 mas, bmaj=6.168 mas, bpa=-54.03 degrees ! Estimated noise=777.452 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.01998e-05 Jy ! Component: 100 - total flux cleaned = 5.9684e-05 Jy ! Component: 150 - total flux cleaned = 6.00952e-05 Jy ! Component: 200 - total flux cleaned = 5.95879e-05 Jy ! Total flux subtracted in 200 components = 5.95879e-05 Jy ! Clean residual min=-0.002031 max=0.002056 Jy/beam ! Clean residual mean=0.000003 rms=0.000490 Jy/beam ! Combined flux in latest and established models = 0.126093 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 39 components and 0.126093 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078249Jy sigma=0.000658 ! Fit after self-cal, rms=0.078197Jy sigma=0.000658 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078197Jy sigma=0.000658 ! Fit after self-cal, rms=0.078016Jy sigma=0.000657 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.128 mas, bmaj=6.172 mas, bpa=-54.05 degrees ! Estimated noise=776.87 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.02702e-05 Jy ! Component: 100 - total flux cleaned = -0.000160422 Jy ! Component: 150 - total flux cleaned = -0.000169913 Jy ! Component: 200 - total flux cleaned = -0.000169711 Jy ! Total flux subtracted in 200 components = -0.000169711 Jy ! Clean residual min=-0.001807 max=0.001674 Jy/beam ! Clean residual mean=0.000001 rms=0.000451 Jy/beam ! Combined flux in latest and established models = 0.125923 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 45 components and 0.125923 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078012Jy sigma=0.000657 ! Fit after self-cal, rms=0.078010Jy sigma=0.000657 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.81845e-05 Jy ! Component: 100 - total flux cleaned = -1.89446e-05 Jy ! Component: 150 - total flux cleaned = -2.72204e-05 Jy ! Component: 200 - total flux cleaned = -3.505e-05 Jy ! Total flux subtracted in 200 components = -3.505e-05 Jy ! Clean residual min=-0.001827 max=0.001681 Jy/beam ! Clean residual mean=0.000001 rms=0.000448 Jy/beam ! Combined flux in latest and established models = 0.125888 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 50 components and 0.125888 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078007Jy sigma=0.000657 ! Fit after self-cal, rms=0.078007Jy sigma=0.000657 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078007Jy sigma=0.000657 ! Fit after self-cal, rms=0.077989Jy sigma=0.000657 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.134 mas, bmaj=6.176 mas, bpa=-54.08 degrees ! Estimated noise=776.622 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000152287 Jy ! Component: 100 - total flux cleaned = -0.000180728 Jy ! Component: 150 - total flux cleaned = -0.000196064 Jy ! Component: 200 - total flux cleaned = -0.000203054 Jy ! Total flux subtracted in 200 components = -0.000203054 Jy ! Clean residual min=-0.001834 max=0.001655 Jy/beam ! Clean residual mean=0.000001 rms=0.000445 Jy/beam ! Combined flux in latest and established models = 0.125685 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 52 components and 0.125685 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077987Jy sigma=0.000656 ! Fit after self-cal, rms=0.077987Jy sigma=0.000656 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.34975e-05 Jy ! Component: 100 - total flux cleaned = 5.79788e-06 Jy ! Component: 150 - total flux cleaned = 1.23945e-05 Jy ! Component: 200 - total flux cleaned = 1.20646e-05 Jy ! Total flux subtracted in 200 components = 1.20646e-05 Jy ! Clean residual min=-0.001840 max=0.001646 Jy/beam ! Clean residual mean=0.000001 rms=0.000444 Jy/beam ! Combined flux in latest and established models = 0.125697 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 52 components and 0.125697 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077985Jy sigma=0.000656 ! Fit after self-cal, rms=0.077985Jy sigma=0.000656 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077985Jy sigma=0.000656 ! Fit after self-cal, rms=0.077955Jy sigma=0.000656 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.431 mas, bmaj=10.46 mas, bpa=73.95 degrees ! Estimated noise=938.959 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000356196 Jy ! Component: 100 - total flux cleaned = -0.000366829 Jy ! Component: 150 - total flux cleaned = -0.000362619 Jy ! Component: 200 - total flux cleaned = -0.000362666 Jy ! Total flux subtracted in 200 components = -0.000362666 Jy ! Clean residual min=-0.001723 max=0.001850 Jy/beam ! Clean residual mean=0.000002 rms=0.000533 Jy/beam ! Combined flux in latest and established models = 0.125334 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 59 components and 0.125334 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077954Jy sigma=0.000656 ! Fit after self-cal, rms=0.077954Jy sigma=0.000656 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.07854e-05 Jy ! Component: 100 - total flux cleaned = -2.48945e-05 Jy ! Component: 150 - total flux cleaned = -2.10914e-05 Jy ! Component: 200 - total flux cleaned = -2.09763e-05 Jy ! Total flux subtracted in 200 components = -2.09763e-05 Jy ! Clean residual min=-0.001734 max=0.001841 Jy/beam ! Clean residual mean=0.000002 rms=0.000532 Jy/beam ! Combined flux in latest and established models = 0.125313 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 62 components and 0.125313 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077953Jy sigma=0.000656 ! Fit after self-cal, rms=0.077953Jy sigma=0.000656 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.138 mas, bmaj=6.18 mas, bpa=-54.1 degrees ! Estimated noise=776.388 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.138 x 6.18 at -54.1 degrees (North through East) ! Clean map min=-0.0017714 max=0.1157 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.305 mas, bmaj=5.471 mas, bpa=-52.58 degrees ! Estimated noise=1585.73 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0889595 Jy ! Component: 100 - total flux cleaned = 0.109071 Jy ! Component: 150 - total flux cleaned = 0.116375 Jy ! Component: 200 - total flux cleaned = 0.120594 Jy ! Total flux subtracted in 200 components = 0.120594 Jy ! Clean residual min=-0.003769 max=0.003589 Jy/beam ! Clean residual mean=-0.000005 rms=0.000987 Jy/beam ! Combined flux in latest and established models = 0.120594 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.120594 Jy ! Inverting map and beam ! Estimated beam: bmin=4.138 mas, bmaj=6.18 mas, bpa=-54.1 degrees ! Estimated noise=776.388 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00328403 Jy ! Component: 100 - total flux cleaned = 0.0043733 Jy ! Component: 150 - total flux cleaned = 0.00456914 Jy ! Component: 200 - total flux cleaned = 0.00471783 Jy ! Total flux subtracted in 200 components = 0.00471783 Jy ! Clean residual min=-0.001968 max=0.001705 Jy/beam ! Clean residual mean=0.000001 rms=0.000450 Jy/beam ! Combined flux in latest and established models = 0.125312 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 30 components and 0.125312 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.431 mas, bmaj=10.46 mas, bpa=73.95 degrees ! Estimated noise=938.959 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000141371 Jy ! Component: 100 - total flux cleaned = 0.000158318 Jy ! Component: 150 - total flux cleaned = 0.000159004 Jy ! Component: 200 - total flux cleaned = 0.000158791 Jy ! Total flux subtracted in 200 components = 0.000158791 Jy ! Clean residual min=-0.001770 max=0.001819 Jy/beam ! Clean residual mean=0.000003 rms=0.000535 Jy/beam ! Combined flux in latest and established models = 0.12547 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.71851e-07 Jy ! Component: 100 - total flux cleaned = -9.05044e-06 Jy ! Component: 150 - total flux cleaned = -1.70598e-05 Jy ! Component: 200 - total flux cleaned = -2.44162e-05 Jy ! Total flux subtracted in 200 components = -2.44162e-05 Jy ! Clean residual min=-0.001774 max=0.001815 Jy/beam ! Clean residual mean=0.000003 rms=0.000534 Jy/beam ! Combined flux in latest and established models = 0.125446 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 43 components and 0.125446 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.138 mas, bmaj=6.18 mas, bpa=-54.1 degrees ! Estimated noise=776.388 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000116421 Jy ! Component: 100 - total flux cleaned = 8.05463e-05 Jy ! Component: 150 - total flux cleaned = 7.01724e-05 Jy ! Component: 200 - total flux cleaned = 6.05162e-05 Jy ! Total flux subtracted in 200 components = 6.05162e-05 Jy ! Clean residual min=-0.001922 max=0.001666 Jy/beam ! Clean residual mean=0.000001 rms=0.000444 Jy/beam ! Combined flux in latest and established models = 0.125507 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 45 components and 0.125507 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077954Jy sigma=0.000656 ! Fit after self-cal, rms=0.077955Jy sigma=0.000656 wmodel J1131+5128_S_2017_10_09_pus_map.mod ! Writing 45 model components to file: J1131+5128_S_2017_10_09_pus_map.mod wobs J1131+5128_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J1131+5128_S_2017_10_09_pus_uvs.fits wwins J1131+5128_S_2017_10_09_pus_map.win ! wwins: Wrote 1 windows to J1131+5128_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00050336 Jy ! Component: 100 - total flux cleaned = -0.000880836 Jy ! Component: 150 - total flux cleaned = -0.00104332 Jy ! Component: 200 - total flux cleaned = -0.00111988 Jy ! Component: 250 - total flux cleaned = -0.00119241 Jy ! Component: 300 - total flux cleaned = -0.00123899 Jy ! Component: 350 - total flux cleaned = -0.00126152 Jy ! Component: 400 - total flux cleaned = -0.0012399 Jy ! Component: 450 - total flux cleaned = -0.0011982 Jy ! Component: 500 - total flux cleaned = -0.00115859 Jy ! Component: 550 - total flux cleaned = -0.00113913 Jy ! Component: 600 - total flux cleaned = -0.00108202 Jy ! Component: 650 - total flux cleaned = -0.00100783 Jy ! Component: 700 - total flux cleaned = -0.000954248 Jy ! Component: 750 - total flux cleaned = -0.000901962 Jy ! Component: 800 - total flux cleaned = -0.000868307 Jy ! Component: 850 - total flux cleaned = -0.000819047 Jy ! Component: 900 - total flux cleaned = -0.000754086 Jy ! Component: 950 - total flux cleaned = -0.000706077 Jy ! Component: 1000 - total flux cleaned = -0.000597143 Jy ! Component: 1050 - total flux cleaned = -0.000536202 Jy ! Component: 1100 - total flux cleaned = -0.00044691 Jy ! Component: 1150 - total flux cleaned = -0.000476289 Jy ! Component: 1200 - total flux cleaned = -0.000404355 Jy ! Component: 1250 - total flux cleaned = -0.000362263 Jy ! Component: 1300 - total flux cleaned = -0.000334225 Jy ! Component: 1350 - total flux cleaned = -0.000293242 Jy ! Component: 1400 - total flux cleaned = -0.000239357 Jy ! Component: 1450 - total flux cleaned = -0.000160182 Jy ! Component: 1500 - total flux cleaned = -6.96459e-05 Jy ! Component: 1550 - total flux cleaned = 3.22e-05 Jy ! Component: 1600 - total flux cleaned = 9.5015e-05 Jy ! Component: 1650 - total flux cleaned = 0.000169119 Jy ! Component: 1700 - total flux cleaned = 0.000217905 Jy ! Component: 1750 - total flux cleaned = 0.000253974 Jy ! Component: 1800 - total flux cleaned = 0.000325011 Jy ! Component: 1850 - total flux cleaned = 0.000336776 Jy ! Component: 1900 - total flux cleaned = 0.000394298 Jy ! Component: 1950 - total flux cleaned = 0.000450996 Jy ! Component: 2000 - total flux cleaned = 0.000484525 Jy ! Component: 2050 - total flux cleaned = 0.000517445 Jy ! Component: 2100 - total flux cleaned = 0.000528364 Jy ! Component: 2150 - total flux cleaned = 0.000550148 Jy ! Component: 2200 - total flux cleaned = 0.000582194 Jy ! Component: 2250 - total flux cleaned = 0.000571635 Jy ! Component: 2300 - total flux cleaned = 0.000634252 Jy ! Component: 2350 - total flux cleaned = 0.00062403 Jy ! Component: 2400 - total flux cleaned = 0.000654645 Jy ! Component: 2450 - total flux cleaned = 0.000644587 Jy ! Component: 2500 - total flux cleaned = 0.000644594 Jy ! Component: 2550 - total flux cleaned = 0.000644584 Jy ! Component: 2600 - total flux cleaned = 0.000664348 Jy ! Component: 2650 - total flux cleaned = 0.000674181 Jy ! Component: 2700 - total flux cleaned = 0.000712608 Jy ! Component: 2750 - total flux cleaned = 0.000703004 Jy ! Component: 2800 - total flux cleaned = 0.00074088 Jy ! Component: 2850 - total flux cleaned = 0.000778514 Jy ! Component: 2900 - total flux cleaned = 0.00078784 Jy ! Component: 2950 - total flux cleaned = 0.000815691 Jy ! Component: 3000 - total flux cleaned = 0.000861769 Jy ! Component: 3050 - total flux cleaned = 0.000889276 Jy ! Component: 3100 - total flux cleaned = 0.000934758 Jy ! Component: 3150 - total flux cleaned = 0.000979932 Jy ! Component: 3200 - total flux cleaned = 0.00103366 Jy ! Component: 3250 - total flux cleaned = 0.00106934 Jy ! Component: 3300 - total flux cleaned = 0.00112238 Jy ! Component: 3350 - total flux cleaned = 0.0011928 Jy ! Component: 3400 - total flux cleaned = 0.00123654 Jy ! Component: 3450 - total flux cleaned = 0.00128873 Jy ! Component: 3500 - total flux cleaned = 0.00134058 Jy ! Component: 3550 - total flux cleaned = 0.00139215 Jy ! Component: 3600 - total flux cleaned = 0.00145204 Jy ! Component: 3650 - total flux cleaned = 0.00152009 Jy ! Component: 3700 - total flux cleaned = 0.00156236 Jy ! Component: 3750 - total flux cleaned = 0.00160443 Jy ! Component: 3800 - total flux cleaned = 0.00165469 Jy ! Component: 3850 - total flux cleaned = 0.00171297 Jy ! Component: 3900 - total flux cleaned = 0.00172128 Jy ! Component: 3950 - total flux cleaned = 0.00177905 Jy ! Component: 4000 - total flux cleaned = 0.00184472 Jy ! Component: 4050 - total flux cleaned = 0.00187738 Jy ! Total flux subtracted in 4096 components = 0.00191798 Jy ! Clean residual min=-0.000505 max=0.000505 Jy/beam ! Clean residual mean=0.000004 rms=0.000137 Jy/beam ! Combined flux in latest and established models = 0.127425 Jy keep ! Adding 253 model components to the UV plane model. ! The established model now contains 298 components and 0.127424 Jy ![Exited script file: muppet] wmap "J1131+5128_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.138 x 6.18 at -54.1 degrees (North through East) ! Clean map min=-0.0013694 max=0.11566 Jy/beam ! Writing clean map to FITS file: J1131+5128_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.115658 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000132307 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.343185 0.343185 0.68637 1.37274 2.74548 5.49096 10.9819 21.9638 43.9277 87.8553 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.115 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.138 x 6.18 at -54.1 degrees (North through East) ! Clean map min=-0.0013694 max=0.11566 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1131+5128_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:11:13 2019