! Started logfile: J1130+0732_S_2017_10_21_pus_uvs.log on Sat May 11 20:57:31 2019 obs J1130+0732_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J1130+0732_S_2017_10_21_pus_uva.fits ! AN table 1: 145 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.983908 visibilities/baseline/integration-bin. ! Found source: J1130+0732 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 20544 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1130+0732_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 638 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.958667Jy sigma=0.009659 ! Fit after self-cal, rms=0.941942Jy sigma=0.009507 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.877 mas, bmaj=13.44 mas, bpa=-18.12 degrees ! Estimated noise=944.226 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0457596 Jy ! Component: 100 - total flux cleaned = 0.0559571 Jy ! Total flux subtracted in 100 components = 0.0559571 Jy ! Clean residual min=-0.003771 max=0.003993 Jy/beam ! Clean residual mean=0.000004 rms=0.000953 Jy/beam ! Combined flux in latest and established models = 0.0559571 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0559571 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077285Jy sigma=0.000713 ! Fit after self-cal, rms=0.077184Jy sigma=0.000712 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.569 mas, bmaj=13.49 mas, bpa=-17.84 degrees ! Estimated noise=555.504 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00437839 Jy ! Component: 100 - total flux cleaned = 0.00622413 Jy ! Component: 150 - total flux cleaned = 0.00732775 Jy ! Component: 200 - total flux cleaned = 0.00807165 Jy ! Total flux subtracted in 200 components = 0.00807165 Jy ! Clean residual min=-0.002755 max=0.002693 Jy/beam ! Clean residual mean=0.000002 rms=0.000605 Jy/beam ! Combined flux in latest and established models = 0.0640287 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 36 components and 0.0640287 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076893Jy sigma=0.000710 ! Fit after self-cal, rms=0.076904Jy sigma=0.000710 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.95 HN 1.01 KP 1.12 ! LA 1.01 MK 1.00 NL 0.94 OV 1.03 ! PT 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.04 HN 1.04 KP 1.07 ! LA 1.03 MK 1.00 NL 1.06 OV 1.02 ! PT 0.91 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 1.01 HN 1.01 KP 1.06 ! LA 0.80 MK 1.07 NL 1.22 OV 0.97 ! PT 0.93 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.05 HN 0.92 KP 1.00* ! LA 0.80 MK 0.96 NL 1.00* OV 1.00* ! PT 0.72 ! ! ! Fit before self-cal, rms=0.076904Jy sigma=0.000710 ! Fit after self-cal, rms=0.073834Jy sigma=0.000705 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.595 mas, bmaj=13.46 mas, bpa=-17.76 degrees ! Estimated noise=553.655 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000209919 Jy ! Component: 100 - total flux cleaned = -0.000306129 Jy ! Component: 150 - total flux cleaned = -0.000335942 Jy ! Component: 200 - total flux cleaned = -0.000347067 Jy ! Total flux subtracted in 200 components = -0.000347067 Jy ! Clean residual min=-0.001546 max=0.001483 Jy/beam ! Clean residual mean=-0.000001 rms=0.000433 Jy/beam ! Combined flux in latest and established models = 0.0636816 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 51 components and 0.0636816 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073825Jy sigma=0.000705 ! Fit after self-cal, rms=0.073866Jy sigma=0.000705 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073866Jy sigma=0.000705 ! Fit after self-cal, rms=0.074068Jy sigma=0.000704 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.611 mas, bmaj=13.45 mas, bpa=-17.78 degrees ! Estimated noise=553.341 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00019527 Jy ! Component: 100 - total flux cleaned = -0.000341673 Jy ! Component: 150 - total flux cleaned = -0.000445138 Jy ! Component: 200 - total flux cleaned = -0.000471411 Jy ! Total flux subtracted in 200 components = -0.000471411 Jy ! Clean residual min=-0.001561 max=0.001510 Jy/beam ! Clean residual mean=-0.000001 rms=0.000409 Jy/beam ! Combined flux in latest and established models = 0.0632102 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 57 components and 0.0632102 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074063Jy sigma=0.000704 ! Fit after self-cal, rms=0.074118Jy sigma=0.000704 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.73821e-05 Jy ! Component: 100 - total flux cleaned = 9.22912e-06 Jy ! Component: 150 - total flux cleaned = 2.05548e-06 Jy ! Component: 200 - total flux cleaned = 8.20485e-06 Jy ! Total flux subtracted in 200 components = 8.20485e-06 Jy ! Clean residual min=-0.001572 max=0.001499 Jy/beam ! Clean residual mean=-0.000000 rms=0.000408 Jy/beam ! Combined flux in latest and established models = 0.0632184 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 66 components and 0.0632184 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074116Jy sigma=0.000704 ! Fit after self-cal, rms=0.074116Jy sigma=0.000704 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074116Jy sigma=0.000704 ! Fit after self-cal, rms=0.074464Jy sigma=0.000704 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.616 mas, bmaj=13.46 mas, bpa=-17.77 degrees ! Estimated noise=553.679 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000268827 Jy ! Component: 100 - total flux cleaned = -0.000325335 Jy ! Component: 150 - total flux cleaned = -0.000325388 Jy ! Component: 200 - total flux cleaned = -0.000319031 Jy ! Total flux subtracted in 200 components = -0.000319031 Jy ! Clean residual min=-0.001547 max=0.001515 Jy/beam ! Clean residual mean=-0.000001 rms=0.000407 Jy/beam ! Combined flux in latest and established models = 0.0628994 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 70 components and 0.0628994 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074461Jy sigma=0.000704 ! Fit after self-cal, rms=0.074491Jy sigma=0.000704 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.7848e-05 Jy ! Component: 100 - total flux cleaned = -2.18482e-05 Jy ! Component: 150 - total flux cleaned = -1.64353e-05 Jy ! Component: 200 - total flux cleaned = -1.13589e-05 Jy ! Total flux subtracted in 200 components = -1.13589e-05 Jy ! Clean residual min=-0.001548 max=0.001498 Jy/beam ! Clean residual mean=-0.000000 rms=0.000407 Jy/beam ! Combined flux in latest and established models = 0.062888 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 72 components and 0.062888 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074489Jy sigma=0.000704 ! Fit after self-cal, rms=0.074492Jy sigma=0.000704 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074492Jy sigma=0.000704 ! Fit after self-cal, rms=0.074695Jy sigma=0.000704 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.719 mas, bmaj=13.66 mas, bpa=-14.52 degrees ! Estimated noise=650.553 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.54558e-05 Jy ! Component: 100 - total flux cleaned = -8.63689e-05 Jy ! Component: 150 - total flux cleaned = -9.75103e-05 Jy ! Component: 200 - total flux cleaned = -0.000112217 Jy ! Total flux subtracted in 200 components = -0.000112217 Jy ! Clean residual min=-0.002278 max=0.001847 Jy/beam ! Clean residual mean=-0.000001 rms=0.000581 Jy/beam ! Combined flux in latest and established models = 0.0627758 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 82 components and 0.0627758 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074694Jy sigma=0.000704 ! Fit after self-cal, rms=0.074700Jy sigma=0.000704 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.88808e-05 Jy ! Component: 100 - total flux cleaned = 1.86788e-05 Jy ! Component: 150 - total flux cleaned = 4.76416e-06 Jy ! Component: 200 - total flux cleaned = -1.21103e-05 Jy ! Total flux subtracted in 200 components = -1.21103e-05 Jy ! Clean residual min=-0.002277 max=0.001846 Jy/beam ! Clean residual mean=-0.000001 rms=0.000577 Jy/beam ! Combined flux in latest and established models = 0.0627637 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 86 components and 0.0627637 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074699Jy sigma=0.000704 ! Fit after self-cal, rms=0.074700Jy sigma=0.000704 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.619 mas, bmaj=13.47 mas, bpa=-17.75 degrees ! Estimated noise=554.078 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.619 x 13.47 at -17.75 degrees (North through East) ! Clean map min=-0.001528 max=0.059854 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.921 mas, bmaj=13.4 mas, bpa=-18.01 degrees ! Estimated noise=943.435 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0453007 Jy ! Component: 100 - total flux cleaned = 0.0554445 Jy ! Component: 150 - total flux cleaned = 0.0591598 Jy ! Component: 200 - total flux cleaned = 0.0604041 Jy ! Total flux subtracted in 200 components = 0.0604041 Jy ! Clean residual min=-0.002966 max=0.002862 Jy/beam ! Clean residual mean=0.000001 rms=0.000809 Jy/beam ! Combined flux in latest and established models = 0.0604041 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.0604041 Jy ! Inverting map and beam ! Estimated beam: bmin=3.619 mas, bmaj=13.47 mas, bpa=-17.75 degrees ! Estimated noise=554.078 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00187706 Jy ! Component: 100 - total flux cleaned = 0.00206315 Jy ! Component: 150 - total flux cleaned = 0.00206327 Jy ! Component: 200 - total flux cleaned = 0.00210151 Jy ! Total flux subtracted in 200 components = 0.00210151 Jy ! Clean residual min=-0.001669 max=0.001537 Jy/beam ! Clean residual mean=-0.000000 rms=0.000413 Jy/beam ! Combined flux in latest and established models = 0.0625056 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 34 components and 0.0625056 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.719 mas, bmaj=13.66 mas, bpa=-14.52 degrees ! Estimated noise=650.553 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000175569 Jy ! Component: 100 - total flux cleaned = 0.00021399 Jy ! Component: 150 - total flux cleaned = 0.000215396 Jy ! Component: 200 - total flux cleaned = 0.000208671 Jy ! Total flux subtracted in 200 components = 0.000208671 Jy ! Clean residual min=-0.002242 max=0.001834 Jy/beam ! Clean residual mean=-0.000001 rms=0.000578 Jy/beam ! Combined flux in latest and established models = 0.0627142 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.83662e-05 Jy ! Component: 100 - total flux cleaned = -2.90513e-05 Jy ! Component: 150 - total flux cleaned = -3.88604e-05 Jy ! Component: 200 - total flux cleaned = -4.73707e-05 Jy ! Total flux subtracted in 200 components = -4.73707e-05 Jy ! Clean residual min=-0.002248 max=0.001838 Jy/beam ! Clean residual mean=-0.000001 rms=0.000577 Jy/beam ! Combined flux in latest and established models = 0.0626669 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 48 components and 0.0626669 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.619 mas, bmaj=13.47 mas, bpa=-17.75 degrees ! Estimated noise=554.078 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.13939e-07 Jy ! Component: 100 - total flux cleaned = -2.53517e-05 Jy ! Component: 150 - total flux cleaned = -4.65492e-05 Jy ! Component: 200 - total flux cleaned = -6.54585e-05 Jy ! Total flux subtracted in 200 components = -6.54585e-05 Jy ! Clean residual min=-0.001591 max=0.001535 Jy/beam ! Clean residual mean=-0.000001 rms=0.000408 Jy/beam ! Combined flux in latest and established models = 0.0626014 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 58 components and 0.0626014 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074704Jy sigma=0.000704 ! Fit after self-cal, rms=0.074701Jy sigma=0.000704 wmodel J1130+0732_S_2017_10_21_pus_map.mod ! Writing 58 model components to file: J1130+0732_S_2017_10_21_pus_map.mod wobs J1130+0732_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J1130+0732_S_2017_10_21_pus_uvs.fits wwins J1130+0732_S_2017_10_21_pus_map.win ! wwins: Wrote 1 windows to J1130+0732_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000144573 Jy ! Component: 100 - total flux cleaned = -0.000303467 Jy ! Component: 150 - total flux cleaned = -0.000426529 Jy ! Component: 200 - total flux cleaned = -0.000543168 Jy ! Component: 250 - total flux cleaned = -0.000742176 Jy ! Component: 300 - total flux cleaned = -0.000911061 Jy ! Component: 350 - total flux cleaned = -0.00109332 Jy ! Component: 400 - total flux cleaned = -0.0012493 Jy ! Component: 450 - total flux cleaned = -0.00143778 Jy ! Component: 500 - total flux cleaned = -0.00163779 Jy ! Component: 550 - total flux cleaned = -0.00179694 Jy ! Component: 600 - total flux cleaned = -0.00196865 Jy ! Component: 650 - total flux cleaned = -0.00210264 Jy ! Component: 700 - total flux cleaned = -0.00224935 Jy ! Component: 750 - total flux cleaned = -0.00231281 Jy ! Component: 800 - total flux cleaned = -0.00235879 Jy ! Component: 850 - total flux cleaned = -0.00232764 Jy ! Component: 900 - total flux cleaned = -0.00238739 Jy ! Component: 950 - total flux cleaned = -0.00241652 Jy ! Component: 1000 - total flux cleaned = -0.00245976 Jy ! Component: 1050 - total flux cleaned = -0.00250205 Jy ! Component: 1100 - total flux cleaned = -0.0025436 Jy ! Component: 1150 - total flux cleaned = -0.00263925 Jy ! Component: 1200 - total flux cleaned = -0.00267953 Jy ! Component: 1250 - total flux cleaned = -0.00274559 Jy ! Component: 1300 - total flux cleaned = -0.00279751 Jy ! Component: 1350 - total flux cleaned = -0.00287419 Jy ! Component: 1400 - total flux cleaned = -0.00292461 Jy ! Component: 1450 - total flux cleaned = -0.00304847 Jy ! Component: 1500 - total flux cleaned = -0.00304872 Jy ! Component: 1550 - total flux cleaned = -0.0031451 Jy ! Component: 1600 - total flux cleaned = -0.00322822 Jy ! Component: 1650 - total flux cleaned = -0.00331002 Jy ! Component: 1700 - total flux cleaned = -0.00340213 Jy ! Component: 1750 - total flux cleaned = -0.00349297 Jy ! Component: 1800 - total flux cleaned = -0.00349309 Jy ! Component: 1850 - total flux cleaned = -0.00357017 Jy ! Component: 1900 - total flux cleaned = -0.00359189 Jy ! Component: 1950 - total flux cleaned = -0.00364591 Jy ! Component: 2000 - total flux cleaned = -0.00368815 Jy ! Component: 2050 - total flux cleaned = -0.0036883 Jy ! Component: 2100 - total flux cleaned = -0.00372947 Jy ! Component: 2150 - total flux cleaned = -0.00369886 Jy ! Component: 2200 - total flux cleaned = -0.00374937 Jy ! Component: 2250 - total flux cleaned = -0.00375936 Jy ! Component: 2300 - total flux cleaned = -0.00375931 Jy ! Component: 2350 - total flux cleaned = -0.00381754 Jy ! Component: 2400 - total flux cleaned = -0.00377911 Jy ! Component: 2450 - total flux cleaned = -0.00376961 Jy ! Component: 2500 - total flux cleaned = -0.00376967 Jy ! Component: 2550 - total flux cleaned = -0.00376956 Jy ! Component: 2600 - total flux cleaned = -0.00374201 Jy ! Component: 2650 - total flux cleaned = -0.00371475 Jy ! Component: 2700 - total flux cleaned = -0.00371498 Jy ! Component: 2750 - total flux cleaned = -0.00369718 Jy ! Component: 2800 - total flux cleaned = -0.00368834 Jy ! Component: 2850 - total flux cleaned = -0.00364472 Jy ! Component: 2900 - total flux cleaned = -0.00367939 Jy ! Component: 2950 - total flux cleaned = -0.00367934 Jy ! Component: 3000 - total flux cleaned = -0.00365373 Jy ! Component: 3050 - total flux cleaned = -0.00361998 Jy ! Component: 3100 - total flux cleaned = -0.00361168 Jy ! Component: 3150 - total flux cleaned = -0.00359516 Jy ! Component: 3200 - total flux cleaned = -0.00356235 Jy ! Component: 3250 - total flux cleaned = -0.00351364 Jy ! Component: 3300 - total flux cleaned = -0.00349769 Jy ! Component: 3350 - total flux cleaned = -0.00345774 Jy ! Component: 3400 - total flux cleaned = -0.00345772 Jy ! Component: 3450 - total flux cleaned = -0.00339467 Jy ! Component: 3500 - total flux cleaned = -0.00334002 Jy ! Component: 3550 - total flux cleaned = -0.00331678 Jy ! Component: 3600 - total flux cleaned = -0.00329372 Jy ! Component: 3650 - total flux cleaned = -0.00327075 Jy ! Component: 3700 - total flux cleaned = -0.00323277 Jy ! Component: 3750 - total flux cleaned = -0.00318757 Jy ! Component: 3800 - total flux cleaned = -0.00315009 Jy ! Component: 3850 - total flux cleaned = -0.00311295 Jy ! Component: 3900 - total flux cleaned = -0.00312036 Jy ! Component: 3950 - total flux cleaned = -0.00308368 Jy ! Component: 4000 - total flux cleaned = -0.00306186 Jy ! Component: 4050 - total flux cleaned = -0.00304022 Jy ! Total flux subtracted in 4096 components = -0.00301146 Jy ! Clean residual min=-0.000398 max=0.000397 Jy/beam ! Clean residual mean=0.000000 rms=0.000142 Jy/beam ! Combined flux in latest and established models = 0.05959 Jy keep ! Adding 331 model components to the UV plane model. ! The established model now contains 389 components and 0.0595899 Jy ![Exited script file: muppet] wmap "J1130+0732_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.619 x 13.47 at -17.75 degrees (North through East) ! Clean map min=-0.0010496 max=0.05962 Jy/beam ! Writing clean map to FITS file: J1130+0732_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0596203 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00014092 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.709086 0.709086 1.41817 2.83634 5.67269 11.3454 22.6908 45.3815 90.763 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.059 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.619 x 13.47 at -17.75 degrees (North through East) ! Clean map min=-0.0010496 max=0.05962 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1130+0732_S_2017_10_21_pus_uvs.log closed on Sat May 11 20:57:36 2019