! Started logfile: J1130+0732_S_2017_09_26_pus_uvs.log on Sat May 11 13:00:57 2019 obs J1130+0732_S_2017_09_26_pus_uva.fits ! Reading UV FITS file: J1130+0732_S_2017_09_26_pus_uva.fits ! AN table 1: 196 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.823554 visibilities/baseline/integration-bin. ! Found source: J1130+0732 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 674 lines of history. ! ! Reading 23244 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1130+0732_S_2017_09_26_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 278 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 263 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 166 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1482 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.964292Jy sigma=0.008380 ! Fit after self-cal, rms=0.942841Jy sigma=0.008208 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.896 mas, bmaj=12.57 mas, bpa=-19.67 degrees ! Estimated noise=957.049 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0459192 Jy ! Component: 100 - total flux cleaned = 0.0559376 Jy ! Total flux subtracted in 100 components = 0.0559376 Jy ! Clean residual min=-0.003236 max=0.004542 Jy/beam ! Clean residual mean=-0.000006 rms=0.001007 Jy/beam ! Combined flux in latest and established models = 0.0559376 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.0559376 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078206Jy sigma=0.000646 ! Fit after self-cal, rms=0.078088Jy sigma=0.000645 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.453 mas, bmaj=14.03 mas, bpa=-18.86 degrees ! Estimated noise=648.869 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00381698 Jy ! Component: 100 - total flux cleaned = 0.00545699 Jy ! Component: 150 - total flux cleaned = 0.00600683 Jy ! Component: 200 - total flux cleaned = 0.00641226 Jy ! Total flux subtracted in 200 components = 0.00641226 Jy ! Clean residual min=-0.001749 max=0.002317 Jy/beam ! Clean residual mean=-0.000003 rms=0.000532 Jy/beam ! Combined flux in latest and established models = 0.0623499 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 38 components and 0.0623499 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077907Jy sigma=0.000644 ! Fit after self-cal, rms=0.077919Jy sigma=0.000644 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00* HN 0.98 KP 1.04 ! LA 0.98 MK 0.99 NL 0.90 OV 1.05 ! PT 1.01 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.00* HN 1.00 KP 0.99 ! LA 0.97 MK 1.08 NL 1.06 OV 1.01 ! PT 0.96 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.00 HN 1.00 KP 1.00 ! LA 0.98 MK 1.03 NL 0.99 OV 0.99 ! PT 1.00 ! ! ! Correcting IF 4. ! A total of 282 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* ! ! ! Fit before self-cal, rms=0.077919Jy sigma=0.000644 ! Fit after self-cal, rms=0.078222Jy sigma=0.000645 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.521 mas, bmaj=14.02 mas, bpa=-18.59 degrees ! Estimated noise=653.787 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000105973 Jy ! Component: 100 - total flux cleaned = 0.000126975 Jy ! Component: 150 - total flux cleaned = 0.000196761 Jy ! Component: 200 - total flux cleaned = 0.000243288 Jy ! Total flux subtracted in 200 components = 0.000243288 Jy ! Clean residual min=-0.001814 max=0.002087 Jy/beam ! Clean residual mean=-0.000002 rms=0.000509 Jy/beam ! Combined flux in latest and established models = 0.0625932 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 50 components and 0.0625932 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078212Jy sigma=0.000645 ! Fit after self-cal, rms=0.078229Jy sigma=0.000645 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078229Jy sigma=0.000645 ! Fit after self-cal, rms=0.080005Jy sigma=0.000644 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.532 mas, bmaj=14.01 mas, bpa=-18.67 degrees ! Estimated noise=655.288 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000328793 Jy ! Component: 100 - total flux cleaned = -0.00037513 Jy ! Component: 150 - total flux cleaned = -0.000401665 Jy ! Component: 200 - total flux cleaned = -0.000413025 Jy ! Total flux subtracted in 200 components = -0.000413025 Jy ! Clean residual min=-0.001357 max=0.001725 Jy/beam ! Clean residual mean=-0.000000 rms=0.000380 Jy/beam ! Combined flux in latest and established models = 0.0621802 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 62 components and 0.0621802 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079999Jy sigma=0.000644 ! Fit after self-cal, rms=0.080093Jy sigma=0.000644 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-14, 113.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0016517 Jy ! Component: 100 - total flux cleaned = 0.00232369 Jy ! Component: 150 - total flux cleaned = 0.00262572 Jy ! Component: 200 - total flux cleaned = 0.00283692 Jy ! Total flux subtracted in 200 components = 0.00283692 Jy ! Clean residual min=-0.001257 max=0.001441 Jy/beam ! Clean residual mean=-0.000001 rms=0.000328 Jy/beam ! Combined flux in latest and established models = 0.0650171 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 86 components and 0.0650171 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080054Jy sigma=0.000643 ! Fit after self-cal, rms=0.080035Jy sigma=0.000643 ! Inverting map ! Added new window around map position (-95, 39). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000768286 Jy ! Component: 100 - total flux cleaned = 0.000883128 Jy ! Component: 150 - total flux cleaned = 0.0010469 Jy ! Component: 200 - total flux cleaned = 0.00119188 Jy ! Total flux subtracted in 200 components = 0.00119188 Jy ! Clean residual min=-0.001124 max=0.001290 Jy/beam ! Clean residual mean=-0.000000 rms=0.000302 Jy/beam ! Combined flux in latest and established models = 0.066209 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 108 components and 0.066209 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079998Jy sigma=0.000643 ! Fit after self-cal, rms=0.079996Jy sigma=0.000643 ! Inverting map ! Added new window around map position (-52, 54). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000893535 Jy ! Component: 100 - total flux cleaned = 0.00110226 Jy ! Component: 150 - total flux cleaned = 0.00107171 Jy ! Component: 200 - total flux cleaned = 0.00110034 Jy ! Total flux subtracted in 200 components = 0.00110034 Jy ! Clean residual min=-0.001132 max=0.001105 Jy/beam ! Clean residual mean=0.000000 rms=0.000274 Jy/beam ! Combined flux in latest and established models = 0.0673093 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 125 components and 0.0673093 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079965Jy sigma=0.000643 ! Fit after self-cal, rms=0.079967Jy sigma=0.000643 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079967Jy sigma=0.000643 ! Fit after self-cal, rms=0.080251Jy sigma=0.000643 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.533 mas, bmaj=14.05 mas, bpa=-18.68 degrees ! Estimated noise=651.469 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000810474 Jy ! Component: 100 - total flux cleaned = 0.00101442 Jy ! Component: 150 - total flux cleaned = 0.000962366 Jy ! Component: 200 - total flux cleaned = 0.000938545 Jy ! Total flux subtracted in 200 components = 0.000938545 Jy ! Clean residual min=-0.001136 max=0.001099 Jy/beam ! Clean residual mean=0.000000 rms=0.000249 Jy/beam ! Combined flux in latest and established models = 0.0682478 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 139 components and 0.0682478 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080231Jy sigma=0.000642 ! Fit after self-cal, rms=0.080256Jy sigma=0.000642 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000247141 Jy ! Component: 100 - total flux cleaned = 0.000196362 Jy ! Component: 150 - total flux cleaned = 0.000173097 Jy ! Component: 200 - total flux cleaned = 0.000129353 Jy ! Total flux subtracted in 200 components = 0.000129353 Jy ! Clean residual min=-0.001133 max=0.001105 Jy/beam ! Clean residual mean=0.000001 rms=0.000242 Jy/beam ! Combined flux in latest and established models = 0.0683772 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 147 components and 0.0683772 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080241Jy sigma=0.000642 ! Fit after self-cal, rms=0.080221Jy sigma=0.000642 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080221Jy sigma=0.000642 ! Fit after self-cal, rms=0.080395Jy sigma=0.000642 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.351 mas, bmaj=14.75 mas, bpa=-13.53 degrees ! Estimated noise=768.808 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.61005e-05 Jy ! Component: 100 - total flux cleaned = 1.46629e-06 Jy ! Component: 150 - total flux cleaned = 3.75437e-05 Jy ! Component: 200 - total flux cleaned = 3.72365e-05 Jy ! Total flux subtracted in 200 components = 3.72365e-05 Jy ! Clean residual min=-0.000836 max=0.000772 Jy/beam ! Clean residual mean=0.000001 rms=0.000221 Jy/beam ! Combined flux in latest and established models = 0.0684144 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 180 components and 0.0684144 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080389Jy sigma=0.000642 ! Fit after self-cal, rms=0.080388Jy sigma=0.000642 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.41544e-05 Jy ! Component: 100 - total flux cleaned = -2.37966e-05 Jy ! Component: 150 - total flux cleaned = -2.4528e-05 Jy ! Component: 200 - total flux cleaned = -2.48515e-05 Jy ! Total flux subtracted in 200 components = -2.48515e-05 Jy ! Clean residual min=-0.000817 max=0.000778 Jy/beam ! Clean residual mean=0.000001 rms=0.000219 Jy/beam ! Combined flux in latest and established models = 0.0683896 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 204 components and 0.0683896 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080383Jy sigma=0.000642 ! Fit after self-cal, rms=0.080382Jy sigma=0.000642 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.534 mas, bmaj=14.06 mas, bpa=-18.67 degrees ! Estimated noise=652.144 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.534 x 14.06 at -18.67 degrees (North through East) ! Clean map min=-0.0016112 max=0.059777 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.952 mas, bmaj=12.69 mas, bpa=-19.36 degrees ! Estimated noise=923.406 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0461298 Jy ! Component: 100 - total flux cleaned = 0.0562428 Jy ! Component: 150 - total flux cleaned = 0.0598523 Jy ! Component: 200 - total flux cleaned = 0.0618393 Jy ! Total flux subtracted in 200 components = 0.0618393 Jy ! Clean residual min=-0.002442 max=0.002415 Jy/beam ! Clean residual mean=-0.000001 rms=0.000616 Jy/beam ! Combined flux in latest and established models = 0.0618394 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.0618394 Jy ! Inverting map and beam ! Estimated beam: bmin=3.534 mas, bmaj=14.06 mas, bpa=-18.67 degrees ! Estimated noise=652.144 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00256114 Jy ! Component: 100 - total flux cleaned = 0.0038914 Jy ! Component: 150 - total flux cleaned = 0.00463693 Jy ! Component: 200 - total flux cleaned = 0.00473784 Jy ! Total flux subtracted in 200 components = 0.00473784 Jy ! Clean residual min=-0.001360 max=0.001304 Jy/beam ! Clean residual mean=-0.000001 rms=0.000359 Jy/beam ! Combined flux in latest and established models = 0.0665772 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 58 components and 0.0665772 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.351 mas, bmaj=14.75 mas, bpa=-13.53 degrees ! Estimated noise=768.808 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000573556 Jy ! Component: 100 - total flux cleaned = 0.000899957 Jy ! Component: 150 - total flux cleaned = 0.00115156 Jy ! Component: 200 - total flux cleaned = 0.00121491 Jy ! Total flux subtracted in 200 components = 0.00121491 Jy ! Clean residual min=-0.001124 max=0.000950 Jy/beam ! Clean residual mean=0.000000 rms=0.000286 Jy/beam ! Combined flux in latest and established models = 0.0677921 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.09868e-06 Jy ! Component: 100 - total flux cleaned = 2.54582e-05 Jy ! Component: 150 - total flux cleaned = 2.59501e-05 Jy ! Component: 200 - total flux cleaned = 7.22017e-05 Jy ! Total flux subtracted in 200 components = 7.22017e-05 Jy ! Clean residual min=-0.001029 max=0.000774 Jy/beam ! Clean residual mean=0.000000 rms=0.000254 Jy/beam ! Combined flux in latest and established models = 0.0678643 Jy ! Adding 67 model components to the UV plane model. ! The established model now contains 118 components and 0.0678643 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.534 mas, bmaj=14.06 mas, bpa=-18.67 degrees ! Estimated noise=652.144 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000127778 Jy ! Component: 100 - total flux cleaned = 0.000335129 Jy ! Component: 150 - total flux cleaned = 0.000462732 Jy ! Component: 200 - total flux cleaned = 0.000461538 Jy ! Total flux subtracted in 200 components = 0.000461538 Jy ! Clean residual min=-0.001106 max=0.001098 Jy/beam ! Clean residual mean=0.000000 rms=0.000274 Jy/beam ! Combined flux in latest and established models = 0.0683259 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 148 components and 0.0683259 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080415Jy sigma=0.000642 ! Fit after self-cal, rms=0.080398Jy sigma=0.000642 wmodel J1130+0732_S_2017_09_26_pus_map.mod ! Writing 148 model components to file: J1130+0732_S_2017_09_26_pus_map.mod wobs J1130+0732_S_2017_09_26_pus_uvs.fits ! Writing UV FITS file: J1130+0732_S_2017_09_26_pus_uvs.fits wwins J1130+0732_S_2017_09_26_pus_map.win ! wwins: Wrote 4 windows to J1130+0732_S_2017_09_26_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000104092 Jy ! Component: 100 - total flux cleaned = -0.000104242 Jy ! Component: 150 - total flux cleaned = -0.000120546 Jy ! Component: 200 - total flux cleaned = -0.000104642 Jy ! Component: 250 - total flux cleaned = -0.000181881 Jy ! Component: 300 - total flux cleaned = -0.00022662 Jy ! Component: 350 - total flux cleaned = -0.000241022 Jy ! Component: 400 - total flux cleaned = -0.000255146 Jy ! Component: 450 - total flux cleaned = -0.00026871 Jy ! Component: 500 - total flux cleaned = -0.000255276 Jy ! Component: 550 - total flux cleaned = -0.0002684 Jy ! Component: 600 - total flux cleaned = -0.000268493 Jy ! Component: 650 - total flux cleaned = -0.000306231 Jy ! Component: 700 - total flux cleaned = -0.000269431 Jy ! Component: 750 - total flux cleaned = -0.000281604 Jy ! Component: 800 - total flux cleaned = -0.000269641 Jy ! Component: 850 - total flux cleaned = -0.00026925 Jy ! Component: 900 - total flux cleaned = -0.000211734 Jy ! Component: 950 - total flux cleaned = -0.000211811 Jy ! Component: 1000 - total flux cleaned = -0.000211604 Jy ! Component: 1050 - total flux cleaned = -0.000167952 Jy ! Component: 1100 - total flux cleaned = -0.000178866 Jy ! Component: 1150 - total flux cleaned = -0.000189494 Jy ! Component: 1200 - total flux cleaned = -0.000210395 Jy ! Component: 1250 - total flux cleaned = -0.000241214 Jy ! Component: 1300 - total flux cleaned = -0.000251312 Jy ! Component: 1350 - total flux cleaned = -0.0002714 Jy ! Component: 1400 - total flux cleaned = -0.000281527 Jy ! Component: 1450 - total flux cleaned = -0.000320765 Jy ! Component: 1500 - total flux cleaned = -0.000330463 Jy ! Component: 1550 - total flux cleaned = -0.000359285 Jy ! Component: 1600 - total flux cleaned = -0.000387731 Jy ! Component: 1650 - total flux cleaned = -0.000397242 Jy ! Component: 1700 - total flux cleaned = -0.000462071 Jy ! Component: 1750 - total flux cleaned = -0.000498543 Jy ! Component: 1800 - total flux cleaned = -0.000562114 Jy ! Component: 1850 - total flux cleaned = -0.000580102 Jy ! Component: 1900 - total flux cleaned = -0.00062456 Jy ! Component: 1950 - total flux cleaned = -0.000659732 Jy ! Component: 2000 - total flux cleaned = -0.000668636 Jy ! Component: 2050 - total flux cleaned = -0.000737768 Jy ! Component: 2100 - total flux cleaned = -0.000797676 Jy ! Component: 2150 - total flux cleaned = -0.000831626 Jy ! Component: 2200 - total flux cleaned = -0.000882073 Jy ! Component: 2250 - total flux cleaned = -0.000915481 Jy ! Component: 2300 - total flux cleaned = -0.000948694 Jy ! Component: 2350 - total flux cleaned = -0.000981512 Jy ! Component: 2400 - total flux cleaned = -0.00102226 Jy ! Component: 2450 - total flux cleaned = -0.00101412 Jy ! Component: 2500 - total flux cleaned = -0.00102213 Jy ! Component: 2550 - total flux cleaned = -0.00104608 Jy ! Component: 2600 - total flux cleaned = -0.0010778 Jy ! Component: 2650 - total flux cleaned = -0.00107009 Jy ! Component: 2700 - total flux cleaned = -0.00110137 Jy ! Component: 2750 - total flux cleaned = -0.00110135 Jy ! Component: 2800 - total flux cleaned = -0.00110139 Jy ! Component: 2850 - total flux cleaned = -0.00113958 Jy ! Component: 2900 - total flux cleaned = -0.00116239 Jy ! Component: 2950 - total flux cleaned = -0.00119254 Jy ! Component: 3000 - total flux cleaned = -0.00120003 Jy ! Component: 3050 - total flux cleaned = -0.00121493 Jy ! Component: 3100 - total flux cleaned = -0.00123706 Jy ! Component: 3150 - total flux cleaned = -0.00124447 Jy ! Component: 3200 - total flux cleaned = -0.00126643 Jy ! Component: 3250 - total flux cleaned = -0.00128095 Jy ! Component: 3300 - total flux cleaned = -0.00128087 Jy ! Component: 3350 - total flux cleaned = -0.00129525 Jy ! Component: 3400 - total flux cleaned = -0.00133083 Jy ! Component: 3450 - total flux cleaned = -0.00132385 Jy ! Component: 3500 - total flux cleaned = -0.00133087 Jy ! Component: 3550 - total flux cleaned = -0.00137284 Jy ! Component: 3600 - total flux cleaned = -0.00138676 Jy ! Component: 3650 - total flux cleaned = -0.00140056 Jy ! Component: 3700 - total flux cleaned = -0.00143501 Jy ! Component: 3750 - total flux cleaned = -0.00148297 Jy ! Component: 3800 - total flux cleaned = -0.00150338 Jy ! Component: 3850 - total flux cleaned = -0.00151696 Jy ! Component: 3900 - total flux cleaned = -0.00154387 Jy ! Component: 3950 - total flux cleaned = -0.00155063 Jy ! Component: 4000 - total flux cleaned = -0.00157742 Jy ! Component: 4050 - total flux cleaned = -0.00161073 Jy ! Total flux subtracted in 4096 components = -0.00163059 Jy ! Clean residual min=-0.000397 max=0.000363 Jy/beam ! Clean residual mean=0.000001 rms=0.000122 Jy/beam ! Combined flux in latest and established models = 0.0666953 Jy keep ! Adding 246 model components to the UV plane model. ! The established model now contains 392 components and 0.0666952 Jy ![Exited script file: muppet] wmap "J1130+0732_S_2017_09_26_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.534 x 14.06 at -18.67 degrees (North through East) ! Clean map min=-0.0012857 max=0.059486 Jy/beam ! Writing clean map to FITS file: J1130+0732_S_2017_09_26_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0594863 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000120682 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.608621 0.608621 1.21724 2.43448 4.86897 9.73793 19.4759 38.9517 77.9035 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.059 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.534 x 14.06 at -18.67 degrees (North through East) ! Clean map min=-0.0012857 max=0.059486 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1130+0732_S_2017_09_26_pus_uvs.log closed on Sat May 11 13:01:02 2019