! Started logfile: J1129-4435_S_2017_05_27_pus_uvs.log on Fri May 3 11:05:05 2019 obs J1129-4435_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J1129-4435_S_2017_05_27_pus_uva.fits ! AN table 1: 116 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.612644 visibilities/baseline/integration-bin. ! Found source: J1129-4435 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 12792 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1129-4435_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 240 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 240 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 240 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 706 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.944311Jy sigma=0.007839 ! Fit after self-cal, rms=0.880332Jy sigma=0.007667 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.274 mas, bmaj=6.643 mas, bpa=-9.432 degrees ! Estimated noise=2564.78 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.096657 Jy ! Component: 100 - total flux cleaned = 0.121644 Jy ! Total flux subtracted in 100 components = 0.121644 Jy ! Clean residual min=-0.012295 max=0.014412 Jy/beam ! Clean residual mean=0.000013 rms=0.003504 Jy/beam ! Combined flux in latest and established models = 0.121644 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.121644 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.186417Jy sigma=0.000988 ! Fit after self-cal, rms=0.186244Jy sigma=0.000985 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.911 mas, bmaj=8.205 mas, bpa=-8.609 degrees ! Estimated noise=1410.72 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0124408 Jy ! Component: 100 - total flux cleaned = 0.0175737 Jy ! Component: 150 - total flux cleaned = 0.0197922 Jy ! Component: 200 - total flux cleaned = 0.0200499 Jy ! Total flux subtracted in 200 components = 0.0200499 Jy ! Clean residual min=-0.009753 max=0.010143 Jy/beam ! Clean residual mean=0.000281 rms=0.002992 Jy/beam ! Combined flux in latest and established models = 0.141694 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 18 components and 0.141694 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.184593Jy sigma=0.001057 ! Fit after self-cal, rms=0.184648Jy sigma=0.001057 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.89 HN 1.00* KP 0.99 ! LA 0.92 MK 1.01 NL 0.96 OV 0.96 ! PT 0.98 SC 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.95 HN 1.00* KP 0.90 ! LA 0.90 MK 1.00 NL 1.22 OV 0.94 ! PT 0.99 SC 1.07 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.93 HN 1.00* KP 0.94 ! LA 0.91 MK 0.99 NL 1.26 OV 0.91 ! PT 0.96 SC 1.04 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.92 HN 1.00* KP 1.00* ! LA 17.53 MK 0.89 NL 1.00* OV 1.00* ! PT 1.01 SC 1.00* ! ! ! Fit before self-cal, rms=0.184648Jy sigma=0.001057 ! Fit after self-cal, rms=1.503943Jy sigma=0.000659 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.922 mas, bmaj=8.148 mas, bpa=-7.995 degrees ! Estimated noise=1452.04 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00385783 Jy ! Component: 100 - total flux cleaned = 0.00547298 Jy ! Component: 150 - total flux cleaned = 0.00569784 Jy ! Component: 200 - total flux cleaned = 0.00576001 Jy ! Total flux subtracted in 200 components = 0.00576001 Jy ! Clean residual min=-0.005829 max=0.005047 Jy/beam ! Clean residual mean=-0.000109 rms=0.001478 Jy/beam ! Combined flux in latest and established models = 0.147454 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 30 components and 0.147454 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.503399Jy sigma=0.000660 ! Fit after self-cal, rms=1.504213Jy sigma=0.000658 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.504213Jy sigma=0.000658 ! Fit after self-cal, rms=1.884669Jy sigma=0.000658 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.902 mas, bmaj=8.097 mas, bpa=-7.827 degrees ! Estimated noise=1491.41 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00390433 Jy ! Component: 100 - total flux cleaned = 0.00557238 Jy ! Component: 150 - total flux cleaned = 0.00608656 Jy ! Component: 200 - total flux cleaned = 0.00618428 Jy ! Total flux subtracted in 200 components = 0.00618428 Jy ! Clean residual min=-0.005714 max=0.005018 Jy/beam ! Clean residual mean=-0.000107 rms=0.001487 Jy/beam ! Combined flux in latest and established models = 0.153638 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 35 components and 0.153638 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.884124Jy sigma=0.000658 ! Fit after self-cal, rms=1.884123Jy sigma=0.000658 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.80268e-05 Jy ! Component: 100 - total flux cleaned = 0.000172356 Jy ! Component: 150 - total flux cleaned = 0.00021354 Jy ! Component: 200 - total flux cleaned = 0.000251571 Jy ! Total flux subtracted in 200 components = 0.000251571 Jy ! Clean residual min=-0.005740 max=0.005048 Jy/beam ! Clean residual mean=-0.000106 rms=0.001484 Jy/beam ! Combined flux in latest and established models = 0.15389 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 41 components and 0.15389 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.884098Jy sigma=0.000658 ! Fit after self-cal, rms=1.884097Jy sigma=0.000658 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.884097Jy sigma=0.000658 ! Fit after self-cal, rms=1.745834Jy sigma=0.000655 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.874 mas, bmaj=8.052 mas, bpa=-7.669 degrees ! Estimated noise=1522.99 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00327697 Jy ! Component: 100 - total flux cleaned = 0.00473323 Jy ! Component: 150 - total flux cleaned = 0.00535616 Jy ! Component: 200 - total flux cleaned = 0.00539429 Jy ! Total flux subtracted in 200 components = 0.00539429 Jy ! Clean residual min=-0.005026 max=0.004656 Jy/beam ! Clean residual mean=-0.000093 rms=0.001383 Jy/beam ! Combined flux in latest and established models = 0.159284 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 43 components and 0.159284 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.745436Jy sigma=0.000656 ! Fit after self-cal, rms=1.745424Jy sigma=0.000656 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.85037e-05 Jy ! Component: 100 - total flux cleaned = 0.00012839 Jy ! Component: 150 - total flux cleaned = 0.000146589 Jy ! Component: 200 - total flux cleaned = 0.000182438 Jy ! Total flux subtracted in 200 components = 0.000182438 Jy ! Clean residual min=-0.005142 max=0.004597 Jy/beam ! Clean residual mean=-0.000093 rms=0.001388 Jy/beam ! Combined flux in latest and established models = 0.159466 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 44 components and 0.159466 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.745410Jy sigma=0.000656 ! Fit after self-cal, rms=1.745411Jy sigma=0.000656 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.745411Jy sigma=0.000656 ! Fit after self-cal, rms=1.754904Jy sigma=0.000655 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.293 mas, bmaj=30.23 mas, bpa=-2.975 degrees ! Estimated noise=2040.79 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00459862 Jy ! Component: 100 - total flux cleaned = 0.00588437 Jy ! Component: 150 - total flux cleaned = 0.00618963 Jy ! Component: 200 - total flux cleaned = 0.00620019 Jy ! Total flux subtracted in 200 components = 0.00620019 Jy ! Clean residual min=-0.006732 max=0.005729 Jy/beam ! Clean residual mean=-0.000188 rms=0.002301 Jy/beam ! Combined flux in latest and established models = 0.165667 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 49 components and 0.165667 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.754430Jy sigma=0.000656 ! Fit after self-cal, rms=1.754424Jy sigma=0.000656 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.76206e-05 Jy ! Component: 100 - total flux cleaned = 3.62689e-05 Jy ! Component: 150 - total flux cleaned = 3.56113e-05 Jy ! Component: 200 - total flux cleaned = 3.52242e-05 Jy ! Total flux subtracted in 200 components = 3.52242e-05 Jy ! Clean residual min=-0.006717 max=0.005700 Jy/beam ! Clean residual mean=-0.000186 rms=0.002298 Jy/beam ! Combined flux in latest and established models = 0.165702 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 57 components and 0.165702 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.754408Jy sigma=0.000656 ! Fit after self-cal, rms=1.754408Jy sigma=0.000656 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.847 mas, bmaj=7.993 mas, bpa=-7.533 degrees ! Estimated noise=1551.03 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.847 x 7.993 at -7.533 degrees (North through East) ! Clean map min=-0.0049761 max=0.13315 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.266 mas, bmaj=6.588 mas, bpa=-8.239 degrees ! Estimated noise=2729.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.10156 Jy ! Component: 100 - total flux cleaned = 0.129673 Jy ! Component: 150 - total flux cleaned = 0.144516 Jy ! Component: 200 - total flux cleaned = 0.15339 Jy ! Total flux subtracted in 200 components = 0.15339 Jy ! Clean residual min=-0.008732 max=0.009120 Jy/beam ! Clean residual mean=-0.000085 rms=0.002429 Jy/beam ! Combined flux in latest and established models = 0.15339 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.15339 Jy ! Inverting map and beam ! Estimated beam: bmin=2.847 mas, bmaj=7.993 mas, bpa=-7.533 degrees ! Estimated noise=1551.03 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00734648 Jy ! Component: 100 - total flux cleaned = 0.010121 Jy ! Component: 150 - total flux cleaned = 0.0110743 Jy ! Component: 200 - total flux cleaned = 0.0112475 Jy ! Total flux subtracted in 200 components = 0.0112475 Jy ! Clean residual min=-0.005177 max=0.004330 Jy/beam ! Clean residual mean=-0.000095 rms=0.001379 Jy/beam ! Combined flux in latest and established models = 0.164637 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 29 components and 0.164637 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.293 mas, bmaj=30.23 mas, bpa=-2.975 degrees ! Estimated noise=2040.79 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000796697 Jy ! Component: 100 - total flux cleaned = 0.000799166 Jy ! Component: 150 - total flux cleaned = 0.000800342 Jy ! Component: 200 - total flux cleaned = 0.000801064 Jy ! Total flux subtracted in 200 components = 0.000801064 Jy ! Clean residual min=-0.006724 max=0.005759 Jy/beam ! Clean residual mean=-0.000189 rms=0.002310 Jy/beam ! Combined flux in latest and established models = 0.165438 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.75001e-07 Jy ! Component: 100 - total flux cleaned = 9.18654e-07 Jy ! Component: 150 - total flux cleaned = 1.32329e-06 Jy ! Component: 200 - total flux cleaned = 1.69008e-06 Jy ! Total flux subtracted in 200 components = 1.69008e-06 Jy ! Clean residual min=-0.006729 max=0.005752 Jy/beam ! Clean residual mean=-0.000189 rms=0.002304 Jy/beam ! Combined flux in latest and established models = 0.16544 Jy ! Adding 4 model components to the UV plane model. ! The established model now contains 32 components and 0.16544 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.847 mas, bmaj=7.993 mas, bpa=-7.533 degrees ! Estimated noise=1551.03 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000521612 Jy ! Component: 100 - total flux cleaned = -0.000369788 Jy ! Component: 150 - total flux cleaned = -0.000310464 Jy ! Component: 200 - total flux cleaned = -0.000260106 Jy ! Total flux subtracted in 200 components = -0.000260106 Jy ! Clean residual min=-0.005056 max=0.004345 Jy/beam ! Clean residual mean=-0.000092 rms=0.001367 Jy/beam ! Combined flux in latest and established models = 0.16518 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 38 components and 0.16518 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.754472Jy sigma=0.000655 ! Fit after self-cal, rms=1.754471Jy sigma=0.000655 wmodel J1129-4435_S_2017_05_27_pus_map.mod ! Writing 38 model components to file: J1129-4435_S_2017_05_27_pus_map.mod wobs J1129-4435_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J1129-4435_S_2017_05_27_pus_uvs.fits wwins J1129-4435_S_2017_05_27_pus_map.win ! wwins: Wrote 1 windows to J1129-4435_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00227967 Jy ! Component: 100 - total flux cleaned = -0.0030915 Jy ! Component: 150 - total flux cleaned = -0.00316473 Jy ! Component: 200 - total flux cleaned = -0.00274599 Jy ! Component: 250 - total flux cleaned = -0.00241264 Jy ! Component: 300 - total flux cleaned = -0.00196494 Jy ! Component: 350 - total flux cleaned = -0.00153501 Jy ! Component: 400 - total flux cleaned = -0.00129769 Jy ! Component: 450 - total flux cleaned = -0.00101076 Jy ! Component: 500 - total flux cleaned = -0.000956342 Jy ! Component: 550 - total flux cleaned = -0.00100898 Jy ! Component: 600 - total flux cleaned = -0.0010605 Jy ! Component: 650 - total flux cleaned = -0.0010605 Jy ! Component: 700 - total flux cleaned = -0.00101146 Jy ! Component: 750 - total flux cleaned = -0.000915755 Jy ! Component: 800 - total flux cleaned = -0.00101123 Jy ! Component: 850 - total flux cleaned = -0.00124115 Jy ! Component: 900 - total flux cleaned = -0.00137541 Jy ! Component: 950 - total flux cleaned = -0.00137534 Jy ! Component: 1000 - total flux cleaned = -0.00163585 Jy ! Component: 1050 - total flux cleaned = -0.00176246 Jy ! Component: 1100 - total flux cleaned = -0.00176223 Jy ! Component: 1150 - total flux cleaned = -0.00188548 Jy ! Component: 1200 - total flux cleaned = -0.00188566 Jy ! Component: 1250 - total flux cleaned = -0.00204323 Jy ! Component: 1300 - total flux cleaned = -0.00208113 Jy ! Component: 1350 - total flux cleaned = -0.0021953 Jy ! Component: 1400 - total flux cleaned = -0.00215794 Jy ! Component: 1450 - total flux cleaned = -0.00234271 Jy ! Component: 1500 - total flux cleaned = -0.00227007 Jy ! Component: 1550 - total flux cleaned = -0.00237713 Jy ! Component: 1600 - total flux cleaned = -0.00230638 Jy ! Component: 1650 - total flux cleaned = -0.00234133 Jy ! Component: 1700 - total flux cleaned = -0.00237596 Jy ! Component: 1750 - total flux cleaned = -0.00244337 Jy ! Component: 1800 - total flux cleaned = -0.00237599 Jy ! Component: 1850 - total flux cleaned = -0.00234304 Jy ! Component: 1900 - total flux cleaned = -0.00231014 Jy ! Component: 1950 - total flux cleaned = -0.00227769 Jy ! Component: 2000 - total flux cleaned = -0.00218263 Jy ! Component: 2050 - total flux cleaned = -0.00218264 Jy ! Component: 2100 - total flux cleaned = -0.00202649 Jy ! Component: 2150 - total flux cleaned = -0.00202647 Jy ! Component: 2200 - total flux cleaned = -0.00187346 Jy ! Component: 2250 - total flux cleaned = -0.00190373 Jy ! Component: 2300 - total flux cleaned = -0.00172375 Jy ! Component: 2350 - total flux cleaned = -0.00166417 Jy ! Component: 2400 - total flux cleaned = -0.00157603 Jy ! Component: 2450 - total flux cleaned = -0.00160466 Jy ! Component: 2500 - total flux cleaned = -0.00145964 Jy ! Component: 2550 - total flux cleaned = -0.00143093 Jy ! Component: 2600 - total flux cleaned = -0.00134533 Jy ! Component: 2650 - total flux cleaned = -0.00128897 Jy ! Component: 2700 - total flux cleaned = -0.00126138 Jy ! Component: 2750 - total flux cleaned = -0.00131653 Jy ! Component: 2800 - total flux cleaned = -0.00120637 Jy ! Component: 2850 - total flux cleaned = -0.00112469 Jy ! Component: 2900 - total flux cleaned = -0.00117885 Jy ! Component: 2950 - total flux cleaned = -0.00115168 Jy ! Component: 3000 - total flux cleaned = -0.00109838 Jy ! Component: 3050 - total flux cleaned = -0.00101924 Jy ! Component: 3100 - total flux cleaned = -0.00104579 Jy ! Component: 3150 - total flux cleaned = -0.000993554 Jy ! Component: 3200 - total flux cleaned = -0.000890271 Jy ! Component: 3250 - total flux cleaned = -0.000915754 Jy ! Component: 3300 - total flux cleaned = -0.000890456 Jy ! Component: 3350 - total flux cleaned = -0.000764542 Jy ! Component: 3400 - total flux cleaned = -0.000764198 Jy ! Component: 3450 - total flux cleaned = -0.000689482 Jy ! Component: 3500 - total flux cleaned = -0.000590746 Jy ! Component: 3550 - total flux cleaned = -0.000468431 Jy ! Component: 3600 - total flux cleaned = -0.000371449 Jy ! Component: 3650 - total flux cleaned = -0.000395747 Jy ! Component: 3700 - total flux cleaned = -0.000371678 Jy ! Component: 3750 - total flux cleaned = -0.000300009 Jy ! Component: 3800 - total flux cleaned = -0.000205082 Jy ! Component: 3850 - total flux cleaned = -6.36182e-05 Jy ! Component: 3900 - total flux cleaned = 7.67939e-05 Jy ! Component: 3950 - total flux cleaned = 0.000169865 Jy ! Component: 4000 - total flux cleaned = 0.000308809 Jy ! Component: 4050 - total flux cleaned = 0.000423791 Jy ! Total flux subtracted in 4096 components = 0.000446722 Jy ! Clean residual min=-0.001387 max=0.001354 Jy/beam ! Clean residual mean=0.000008 rms=0.000438 Jy/beam ! Combined flux in latest and established models = 0.165627 Jy keep ! Adding 253 model components to the UV plane model. ! The established model now contains 291 components and 0.165627 Jy ![Exited script file: muppet] wmap "J1129-4435_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.847 x 7.993 at -7.533 degrees (North through East) ! Clean map min=-0.0036827 max=0.13561 Jy/beam ! Writing clean map to FITS file: J1129-4435_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.135609 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00043623 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.96505 0.96505 1.9301 3.8602 7.7204 15.4408 30.8816 61.7632 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0013 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.135 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.847 x 7.993 at -7.533 degrees (North through East) ! Clean map min=-0.0036827 max=0.13561 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1129-4435_S_2017_05_27_pus_uvs.log closed on Fri May 3 11:05:09 2019