! Started logfile: J1129-0240_S_2017_09_26_pus_uvs.log on Sat May 11 13:00:52 2019 obs J1129-0240_S_2017_09_26_pus_uva.fits ! Reading UV FITS file: J1129-0240_S_2017_09_26_pus_uva.fits ! AN table 1: 174 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.66954 visibilities/baseline/integration-bin. ! Found source: J1129-0240 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 674 lines of history. ! ! Reading 16776 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1129-0240_S_2017_09_26_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 273 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 330 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 315 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1168 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.953735Jy sigma=0.008013 ! Fit after self-cal, rms=0.926510Jy sigma=0.007793 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.746 mas, bmaj=22.95 mas, bpa=-18.31 degrees ! Estimated noise=1270.13 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0584128 Jy ! Component: 100 - total flux cleaned = 0.0715284 Jy ! Total flux subtracted in 100 components = 0.0715284 Jy ! Clean residual min=-0.003545 max=0.004710 Jy/beam ! Clean residual mean=-0.000003 rms=0.000971 Jy/beam ! Combined flux in latest and established models = 0.0715284 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0715284 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082837Jy sigma=0.000666 ! Fit after self-cal, rms=0.082734Jy sigma=0.000665 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.5 mas, bmaj=23.33 mas, bpa=-17.5 degrees ! Estimated noise=752.506 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00581076 Jy ! Component: 100 - total flux cleaned = 0.00705826 Jy ! Component: 150 - total flux cleaned = 0.00782311 Jy ! Component: 200 - total flux cleaned = 0.0083375 Jy ! Total flux subtracted in 200 components = 0.0083375 Jy ! Clean residual min=-0.001982 max=0.001871 Jy/beam ! Clean residual mean=-0.000004 rms=0.000548 Jy/beam ! Combined flux in latest and established models = 0.0798659 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 40 components and 0.0798659 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082346Jy sigma=0.000662 ! Fit after self-cal, rms=0.082345Jy sigma=0.000662 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 0.98 KP 1.01 ! LA 1.04 MK 1.07 NL 0.92 OV 1.03 ! PT 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.10 HN 1.04 KP 0.99 ! LA 1.01 MK 0.97 NL 1.05 OV 0.98 ! PT 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 1.00 KP 0.95 ! LA 0.99 MK 1.07 NL 0.99 OV 0.98 ! PT 0.92 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 0.91 KP 1.00* ! LA 0.84 MK 1.06 NL 1.00* OV 1.00* ! PT 0.92 ! ! ! Fit before self-cal, rms=0.082345Jy sigma=0.000662 ! Fit after self-cal, rms=0.082146Jy sigma=0.000660 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.538 mas, bmaj=23.46 mas, bpa=-17.49 degrees ! Estimated noise=750.8 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000198338 Jy ! Component: 100 - total flux cleaned = -0.000453409 Jy ! Component: 150 - total flux cleaned = -0.000521718 Jy ! Component: 200 - total flux cleaned = -0.000562231 Jy ! Total flux subtracted in 200 components = -0.000562231 Jy ! Clean residual min=-0.001805 max=0.001794 Jy/beam ! Clean residual mean=-0.000002 rms=0.000496 Jy/beam ! Combined flux in latest and established models = 0.0793036 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 53 components and 0.0793036 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082125Jy sigma=0.000660 ! Fit after self-cal, rms=0.082139Jy sigma=0.000660 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082139Jy sigma=0.000660 ! Fit after self-cal, rms=0.082291Jy sigma=0.000659 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.545 mas, bmaj=23.51 mas, bpa=-17.43 degrees ! Estimated noise=749.679 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000179199 Jy ! Component: 100 - total flux cleaned = 4.05275e-05 Jy ! Component: 150 - total flux cleaned = -6.01039e-05 Jy ! Component: 200 - total flux cleaned = -0.000136129 Jy ! Total flux subtracted in 200 components = -0.000136129 Jy ! Clean residual min=-0.001635 max=0.001614 Jy/beam ! Clean residual mean=-0.000004 rms=0.000440 Jy/beam ! Combined flux in latest and established models = 0.0791675 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 69 components and 0.0791675 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082281Jy sigma=0.000659 ! Fit after self-cal, rms=0.082301Jy sigma=0.000659 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.06946e-05 Jy ! Component: 100 - total flux cleaned = -8.9282e-05 Jy ! Component: 150 - total flux cleaned = -0.000157402 Jy ! Component: 200 - total flux cleaned = -0.000182798 Jy ! Total flux subtracted in 200 components = -0.000182798 Jy ! Clean residual min=-0.001590 max=0.001595 Jy/beam ! Clean residual mean=-0.000004 rms=0.000437 Jy/beam ! Combined flux in latest and established models = 0.0789847 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 80 components and 0.0789847 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082296Jy sigma=0.000659 ! Fit after self-cal, rms=0.082296Jy sigma=0.000659 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082296Jy sigma=0.000659 ! Fit after self-cal, rms=0.082481Jy sigma=0.000659 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.547 mas, bmaj=23.52 mas, bpa=-17.4 degrees ! Estimated noise=750.054 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.02756e-05 Jy ! Component: 100 - total flux cleaned = -7.44902e-05 Jy ! Component: 150 - total flux cleaned = -0.000181542 Jy ! Component: 200 - total flux cleaned = -0.000243726 Jy ! Total flux subtracted in 200 components = -0.000243726 Jy ! Clean residual min=-0.001573 max=0.001594 Jy/beam ! Clean residual mean=-0.000004 rms=0.000431 Jy/beam ! Combined flux in latest and established models = 0.078741 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 84 components and 0.078741 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082476Jy sigma=0.000659 ! Fit after self-cal, rms=0.082480Jy sigma=0.000659 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.30231e-06 Jy ! Component: 100 - total flux cleaned = -7.8093e-05 Jy ! Component: 150 - total flux cleaned = -0.000132191 Jy ! Component: 200 - total flux cleaned = -0.000162978 Jy ! Total flux subtracted in 200 components = -0.000162978 Jy ! Clean residual min=-0.001557 max=0.001560 Jy/beam ! Clean residual mean=-0.000004 rms=0.000428 Jy/beam ! Combined flux in latest and established models = 0.078578 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 91 components and 0.078578 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082477Jy sigma=0.000659 ! Fit after self-cal, rms=0.082476Jy sigma=0.000659 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082476Jy sigma=0.000659 ! Fit after self-cal, rms=0.082616Jy sigma=0.000659 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.978 mas, bmaj=23.15 mas, bpa=-15.09 degrees ! Estimated noise=880.392 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000198525 Jy ! Component: 100 - total flux cleaned = -0.000263352 Jy ! Component: 150 - total flux cleaned = -0.000318699 Jy ! Component: 200 - total flux cleaned = -0.000368877 Jy ! Total flux subtracted in 200 components = -0.000368877 Jy ! Clean residual min=-0.001494 max=0.001793 Jy/beam ! Clean residual mean=-0.000007 rms=0.000526 Jy/beam ! Combined flux in latest and established models = 0.0782091 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 112 components and 0.0782091 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082615Jy sigma=0.000659 ! Fit after self-cal, rms=0.082618Jy sigma=0.000659 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.51518e-05 Jy ! Component: 100 - total flux cleaned = -9.75192e-05 Jy ! Component: 150 - total flux cleaned = -0.000119703 Jy ! Component: 200 - total flux cleaned = -0.000147094 Jy ! Total flux subtracted in 200 components = -0.000147094 Jy ! Clean residual min=-0.001480 max=0.001784 Jy/beam ! Clean residual mean=-0.000007 rms=0.000523 Jy/beam ! Combined flux in latest and established models = 0.078062 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 127 components and 0.078062 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082617Jy sigma=0.000659 ! Fit after self-cal, rms=0.082617Jy sigma=0.000659 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.549 mas, bmaj=23.53 mas, bpa=-17.39 degrees ! Estimated noise=750.643 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.549 x 23.53 at -17.39 degrees (North through East) ! Clean map min=-0.0017206 max=0.076676 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.779 mas, bmaj=23.09 mas, bpa=-18.18 degrees ! Estimated noise=1281.1 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0589291 Jy ! Component: 100 - total flux cleaned = 0.0720257 Jy ! Component: 150 - total flux cleaned = 0.0761891 Jy ! Component: 200 - total flux cleaned = 0.0771728 Jy ! Total flux subtracted in 200 components = 0.0771728 Jy ! Clean residual min=-0.002329 max=0.002380 Jy/beam ! Clean residual mean=-0.000002 rms=0.000648 Jy/beam ! Combined flux in latest and established models = 0.0771728 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.0771728 Jy ! Inverting map and beam ! Estimated beam: bmin=3.549 mas, bmaj=23.53 mas, bpa=-17.39 degrees ! Estimated noise=750.643 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00179128 Jy ! Component: 100 - total flux cleaned = 0.00239171 Jy ! Component: 150 - total flux cleaned = 0.00252038 Jy ! Component: 200 - total flux cleaned = 0.00239256 Jy ! Total flux subtracted in 200 components = 0.00239256 Jy ! Clean residual min=-0.001705 max=0.001739 Jy/beam ! Clean residual mean=-0.000004 rms=0.000466 Jy/beam ! Combined flux in latest and established models = 0.0795654 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 35 components and 0.0795654 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.978 mas, bmaj=23.15 mas, bpa=-15.09 degrees ! Estimated noise=880.392 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.74657e-06 Jy ! Component: 100 - total flux cleaned = -0.00018386 Jy ! Component: 150 - total flux cleaned = -0.000363088 Jy ! Component: 200 - total flux cleaned = -0.000520498 Jy ! Total flux subtracted in 200 components = -0.000520498 Jy ! Clean residual min=-0.001501 max=0.001828 Jy/beam ! Clean residual mean=-0.000006 rms=0.000548 Jy/beam ! Combined flux in latest and established models = 0.0790449 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000125142 Jy ! Component: 100 - total flux cleaned = -0.000223664 Jy ! Component: 150 - total flux cleaned = -0.00031305 Jy ! Component: 200 - total flux cleaned = -0.00039449 Jy ! Total flux subtracted in 200 components = -0.00039449 Jy ! Clean residual min=-0.001486 max=0.001800 Jy/beam ! Clean residual mean=-0.000006 rms=0.000536 Jy/beam ! Combined flux in latest and established models = 0.0786504 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 72 components and 0.0786504 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.549 mas, bmaj=23.53 mas, bpa=-17.39 degrees ! Estimated noise=750.643 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000106229 Jy ! Component: 100 - total flux cleaned = 0.000128317 Jy ! Component: 150 - total flux cleaned = 0.000110976 Jy ! Component: 200 - total flux cleaned = 6.0236e-05 Jy ! Total flux subtracted in 200 components = 6.0236e-05 Jy ! Clean residual min=-0.001541 max=0.001608 Jy/beam ! Clean residual mean=-0.000004 rms=0.000436 Jy/beam ! Combined flux in latest and established models = 0.0787106 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 84 components and 0.0787106 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082624Jy sigma=0.000659 ! Fit after self-cal, rms=0.082616Jy sigma=0.000659 wmodel J1129-0240_S_2017_09_26_pus_map.mod ! Writing 84 model components to file: J1129-0240_S_2017_09_26_pus_map.mod wobs J1129-0240_S_2017_09_26_pus_uvs.fits ! Writing UV FITS file: J1129-0240_S_2017_09_26_pus_uvs.fits wwins J1129-0240_S_2017_09_26_pus_map.win ! wwins: Wrote 1 windows to J1129-0240_S_2017_09_26_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00044231 Jy ! Component: 100 - total flux cleaned = 0.000546519 Jy ! Component: 150 - total flux cleaned = 0.000668091 Jy ! Component: 200 - total flux cleaned = 0.000714305 Jy ! Component: 250 - total flux cleaned = 0.000759617 Jy ! Component: 300 - total flux cleaned = 0.000823191 Jy ! Component: 350 - total flux cleaned = 0.000764008 Jy ! Component: 400 - total flux cleaned = 0.000726266 Jy ! Component: 450 - total flux cleaned = 0.0006335 Jy ! Component: 500 - total flux cleaned = 0.000579359 Jy ! Component: 550 - total flux cleaned = 0.00054406 Jy ! Component: 600 - total flux cleaned = 0.000425783 Jy ! Component: 650 - total flux cleaned = 0.00036034 Jy ! Component: 700 - total flux cleaned = 0.000249212 Jy ! Component: 750 - total flux cleaned = 0.000187639 Jy ! Component: 800 - total flux cleaned = 0.00017232 Jy ! Component: 850 - total flux cleaned = 0.000128101 Jy ! Component: 900 - total flux cleaned = 0.000141893 Jy ! Component: 950 - total flux cleaned = 8.55551e-05 Jy ! Component: 1000 - total flux cleaned = 9.93422e-05 Jy ! Component: 1050 - total flux cleaned = 0.000112977 Jy ! Component: 1100 - total flux cleaned = 0.000165526 Jy ! Component: 1150 - total flux cleaned = 0.000191026 Jy ! Component: 1200 - total flux cleaned = 0.000191266 Jy ! Component: 1250 - total flux cleaned = 0.000228421 Jy ! Component: 1300 - total flux cleaned = 0.000240414 Jy ! Component: 1350 - total flux cleaned = 0.00025229 Jy ! Component: 1400 - total flux cleaned = 0.000264022 Jy ! Component: 1450 - total flux cleaned = 0.000264093 Jy ! Component: 1500 - total flux cleaned = 0.000298424 Jy ! Component: 1550 - total flux cleaned = 0.00028707 Jy ! Component: 1600 - total flux cleaned = 0.000331464 Jy ! Component: 1650 - total flux cleaned = 0.000364367 Jy ! Component: 1700 - total flux cleaned = 0.000385946 Jy ! Component: 1750 - total flux cleaned = 0.000428702 Jy ! Component: 1800 - total flux cleaned = 0.000470723 Jy ! Component: 1850 - total flux cleaned = 0.000491397 Jy ! Component: 1900 - total flux cleaned = 0.000542706 Jy ! Component: 1950 - total flux cleaned = 0.000582989 Jy ! Component: 2000 - total flux cleaned = 0.000622656 Jy ! Component: 2050 - total flux cleaned = 0.000652163 Jy ! Component: 2100 - total flux cleaned = 0.000710489 Jy ! Component: 2150 - total flux cleaned = 0.00073926 Jy ! Component: 2200 - total flux cleaned = 0.00078687 Jy ! Component: 2250 - total flux cleaned = 0.000843106 Jy ! Component: 2300 - total flux cleaned = 0.000880049 Jy ! Component: 2350 - total flux cleaned = 0.000943855 Jy ! Component: 2400 - total flux cleaned = 0.000979862 Jy ! Component: 2450 - total flux cleaned = 0.00101546 Jy ! Component: 2500 - total flux cleaned = 0.00105947 Jy ! Component: 2550 - total flux cleaned = 0.0011031 Jy ! Component: 2600 - total flux cleaned = 0.00118061 Jy ! Component: 2650 - total flux cleaned = 0.0011976 Jy ! Component: 2700 - total flux cleaned = 0.00125671 Jy ! Component: 2750 - total flux cleaned = 0.00133185 Jy ! Component: 2800 - total flux cleaned = 0.00139796 Jy ! Component: 2850 - total flux cleaned = 0.00144709 Jy ! Component: 2900 - total flux cleaned = 0.00151995 Jy ! Component: 2950 - total flux cleaned = 0.00156004 Jy ! Component: 3000 - total flux cleaned = 0.00163158 Jy ! Component: 3050 - total flux cleaned = 0.00166311 Jy ! Component: 3100 - total flux cleaned = 0.00170211 Jy ! Component: 3150 - total flux cleaned = 0.00175629 Jy ! Component: 3200 - total flux cleaned = 0.00177931 Jy ! Component: 3250 - total flux cleaned = 0.00181739 Jy ! Component: 3300 - total flux cleaned = 0.00186269 Jy ! Component: 3350 - total flux cleaned = 0.00190011 Jy ! Component: 3400 - total flux cleaned = 0.00192975 Jy ! Component: 3450 - total flux cleaned = 0.00197389 Jy ! Component: 3500 - total flux cleaned = 0.00199584 Jy ! Component: 3550 - total flux cleaned = 0.0020466 Jy ! Component: 3600 - total flux cleaned = 0.00210409 Jy ! Component: 3650 - total flux cleaned = 0.00213263 Jy ! Component: 3700 - total flux cleaned = 0.00217509 Jy ! Component: 3750 - total flux cleaned = 0.00221733 Jy ! Component: 3800 - total flux cleaned = 0.00224525 Jy ! Component: 3850 - total flux cleaned = 0.00229384 Jy ! Component: 3900 - total flux cleaned = 0.00233513 Jy ! Component: 3950 - total flux cleaned = 0.00236937 Jy ! Component: 4000 - total flux cleaned = 0.0024306 Jy ! Component: 4050 - total flux cleaned = 0.00245759 Jy ! Total flux subtracted in 4096 components = 0.00249123 Jy ! Clean residual min=-0.000418 max=0.000422 Jy/beam ! Clean residual mean=-0.000001 rms=0.000131 Jy/beam ! Combined flux in latest and established models = 0.0812018 Jy keep ! Adding 271 model components to the UV plane model. ! The established model now contains 355 components and 0.0812018 Jy ![Exited script file: muppet] wmap "J1129-0240_S_2017_09_26_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.549 x 23.53 at -17.39 degrees (North through East) ! Clean map min=-0.0013341 max=0.076663 Jy/beam ! Writing clean map to FITS file: J1129-0240_S_2017_09_26_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0766634 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000127718 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.499787 0.499787 0.999573 1.99915 3.99829 7.99659 15.9932 31.9863 63.9727 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.076 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.549 x 23.53 at -17.39 degrees (North through East) ! Clean map min=-0.0013341 max=0.076663 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1129-0240_S_2017_09_26_pus_uvs.log closed on Sat May 11 13:00:57 2019