! Started logfile: J1128-1122_S_2017_05_27_pus_uvs.log on Fri May 3 11:05:00 2019 obs J1128-1122_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J1128-1122_S_2017_05_27_pus_uva.fits ! AN table 1: 146 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.940183 visibilities/baseline/integration-bin. ! Found source: J1128-1122 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 24708 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1128-1122_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 45 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 75 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 101 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 747 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.006495Jy sigma=0.052233 ! Fit after self-cal, rms=0.961143Jy sigma=0.052155 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.517 mas, bmaj=7.164 mas, bpa=7.235 degrees ! Estimated noise=420 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0144624 Jy ! Component: 100 - total flux cleaned = 0.0222872 Jy ! Total flux subtracted in 100 components = 0.0222872 Jy ! Clean residual min=-0.005196 max=0.007852 Jy/beam ! Clean residual mean=-0.000017 rms=0.001600 Jy/beam ! Combined flux in latest and established models = 0.0222872 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.0222872 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126623Jy sigma=0.000910 ! Fit after self-cal, rms=0.125993Jy sigma=0.000867 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.824 mas, bmaj=7.772 mas, bpa=0.7144 degrees ! Estimated noise=344.985 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3, -8.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00990999 Jy ! Component: 100 - total flux cleaned = 0.0159803 Jy ! Component: 150 - total flux cleaned = 0.0199432 Jy ! Component: 200 - total flux cleaned = 0.0228621 Jy ! Total flux subtracted in 200 components = 0.0228621 Jy ! Clean residual min=-0.004542 max=0.005097 Jy/beam ! Clean residual mean=-0.000010 rms=0.001371 Jy/beam ! Combined flux in latest and established models = 0.0451493 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 11 components and 0.0451494 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123846Jy sigma=0.000920 ! Fit after self-cal, rms=0.123565Jy sigma=0.000914 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.48 FD 0.77 HN 0.79 KP 0.90 ! LA 0.87 MK 0.74 NL 0.89 OV 0.94 ! PT 0.98 SC 0.71 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.41 FD 0.78 HN 0.83 KP 0.87 ! LA 0.88 MK 0.75 NL 0.87 OV 0.87 ! PT 1.02 SC 0.73 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 5.51 FD 0.96 HN 0.80 KP 0.96 ! LA 0.98 MK 1.62 NL 1.05 OV 1.54 ! PT 1.04 SC 0.86 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.77 HN 0.74 KP 1.00* ! LA 0.69 MK 0.52 NL 1.00* OV 1.00* ! PT 0.84 SC 1.00* ! ! ! Fit before self-cal, rms=0.123565Jy sigma=0.000914 ! Fit after self-cal, rms=0.107563Jy sigma=0.000650 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.402 mas, bmaj=8.14 mas, bpa=-4.039 degrees ! Estimated noise=463.314 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000378727 Jy ! Component: 100 - total flux cleaned = -4.85515e-05 Jy ! Component: 150 - total flux cleaned = -0.000380697 Jy ! Component: 200 - total flux cleaned = -0.000571795 Jy ! Total flux subtracted in 200 components = -0.000571795 Jy ! Clean residual min=-0.001787 max=0.001851 Jy/beam ! Clean residual mean=0.000004 rms=0.000410 Jy/beam ! Combined flux in latest and established models = 0.0445776 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 26 components and 0.0445776 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107380Jy sigma=0.000650 ! Fit after self-cal, rms=0.106742Jy sigma=0.000644 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000770361 Jy ! Component: 100 - total flux cleaned = 0.000492871 Jy ! Component: 150 - total flux cleaned = 0.00042125 Jy ! Component: 200 - total flux cleaned = 0.000292859 Jy ! Total flux subtracted in 200 components = 0.000292859 Jy ! Clean residual min=-0.001559 max=0.001837 Jy/beam ! Clean residual mean=0.000004 rms=0.000418 Jy/beam ! Combined flux in latest and established models = 0.0448704 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 37 components and 0.0448704 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106578Jy sigma=0.000645 ! Fit after self-cal, rms=0.106566Jy sigma=0.000645 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106566Jy sigma=0.000645 ! Fit after self-cal, rms=0.079639Jy sigma=0.000639 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.324 mas, bmaj=8.081 mas, bpa=-5.988 degrees ! Estimated noise=481.505 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000225682 Jy ! Component: 100 - total flux cleaned = -0.000493265 Jy ! Component: 150 - total flux cleaned = -0.000708306 Jy ! Component: 200 - total flux cleaned = -0.000785182 Jy ! Total flux subtracted in 200 components = -0.000785182 Jy ! Clean residual min=-0.001139 max=0.001298 Jy/beam ! Clean residual mean=0.000004 rms=0.000325 Jy/beam ! Combined flux in latest and established models = 0.0440852 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 55 components and 0.0440852 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079595Jy sigma=0.000639 ! Fit after self-cal, rms=0.079279Jy sigma=0.000637 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000116337 Jy ! Component: 100 - total flux cleaned = -2.10883e-06 Jy ! Component: 150 - total flux cleaned = -2.64533e-05 Jy ! Component: 200 - total flux cleaned = -2.60848e-05 Jy ! Total flux subtracted in 200 components = -2.60848e-05 Jy ! Clean residual min=-0.001163 max=0.001416 Jy/beam ! Clean residual mean=0.000004 rms=0.000338 Jy/beam ! Combined flux in latest and established models = 0.0440591 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 68 components and 0.0440591 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079238Jy sigma=0.000637 ! Fit after self-cal, rms=0.079254Jy sigma=0.000637 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079254Jy sigma=0.000637 ! Fit after self-cal, rms=0.080070Jy sigma=0.000636 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.306 mas, bmaj=8.137 mas, bpa=-6.679 degrees ! Estimated noise=492.372 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000240621 Jy ! Component: 100 - total flux cleaned = -0.000403883 Jy ! Component: 150 - total flux cleaned = -0.000561889 Jy ! Component: 200 - total flux cleaned = -0.000606815 Jy ! Total flux subtracted in 200 components = -0.000606815 Jy ! Clean residual min=-0.001180 max=0.001350 Jy/beam ! Clean residual mean=0.000004 rms=0.000326 Jy/beam ! Combined flux in latest and established models = 0.0434523 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 75 components and 0.0434523 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080035Jy sigma=0.000636 ! Fit after self-cal, rms=0.079978Jy sigma=0.000636 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000209998 Jy ! Component: 100 - total flux cleaned = -0.000325947 Jy ! Component: 150 - total flux cleaned = -0.000305985 Jy ! Component: 200 - total flux cleaned = -0.000323908 Jy ! Total flux subtracted in 200 components = -0.000323908 Jy ! Clean residual min=-0.001253 max=0.001377 Jy/beam ! Clean residual mean=0.000004 rms=0.000328 Jy/beam ! Combined flux in latest and established models = 0.0431284 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 86 components and 0.0431284 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079956Jy sigma=0.000636 ! Fit after self-cal, rms=0.079969Jy sigma=0.000636 ! Inverting map ! Added new window around map position (-84.5, -52.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00105757 Jy ! Component: 100 - total flux cleaned = 0.00102766 Jy ! Component: 150 - total flux cleaned = 0.000972254 Jy ! Component: 200 - total flux cleaned = 0.000923468 Jy ! Total flux subtracted in 200 components = 0.000923468 Jy ! Clean residual min=-0.001130 max=0.001159 Jy/beam ! Clean residual mean=0.000003 rms=0.000308 Jy/beam ! Combined flux in latest and established models = 0.0440519 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 110 components and 0.0440519 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079931Jy sigma=0.000635 ! Fit after self-cal, rms=0.079927Jy sigma=0.000635 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079927Jy sigma=0.000635 ! Fit after self-cal, rms=0.081462Jy sigma=0.000635 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.414 mas, bmaj=13.76 mas, bpa=-1.106 degrees ! Estimated noise=635.964 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000803086 Jy ! Component: 100 - total flux cleaned = 0.000907304 Jy ! Component: 150 - total flux cleaned = 0.000962077 Jy ! Component: 200 - total flux cleaned = 0.000986964 Jy ! Total flux subtracted in 200 components = 0.000986964 Jy ! Clean residual min=-0.001601 max=0.001275 Jy/beam ! Clean residual mean=0.000007 rms=0.000401 Jy/beam ! Combined flux in latest and established models = 0.0450388 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 129 components and 0.0450388 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081426Jy sigma=0.000635 ! Fit after self-cal, rms=0.081399Jy sigma=0.000635 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000748003 Jy ! Component: 100 - total flux cleaned = 0.000803238 Jy ! Component: 150 - total flux cleaned = 0.000828203 Jy ! Component: 200 - total flux cleaned = 0.000898561 Jy ! Total flux subtracted in 200 components = 0.000898561 Jy ! Clean residual min=-0.001553 max=0.001276 Jy/beam ! Clean residual mean=0.000006 rms=0.000391 Jy/beam ! Combined flux in latest and established models = 0.0459374 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 137 components and 0.0459374 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081372Jy sigma=0.000634 ! Fit after self-cal, rms=0.081369Jy sigma=0.000634 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.306 mas, bmaj=8.194 mas, bpa=-7.01 degrees ! Estimated noise=498.675 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.306 x 8.194 at -7.01 degrees (North through East) ! Clean map min=-0.0020232 max=0.031905 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.759 mas, bmaj=6.517 mas, bpa=-3.665 degrees ! Estimated noise=718.618 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0275074 Jy ! Component: 100 - total flux cleaned = 0.0350106 Jy ! Component: 150 - total flux cleaned = 0.0387728 Jy ! Component: 200 - total flux cleaned = 0.0406389 Jy ! Total flux subtracted in 200 components = 0.0406389 Jy ! Clean residual min=-0.002003 max=0.002093 Jy/beam ! Clean residual mean=-0.000005 rms=0.000536 Jy/beam ! Combined flux in latest and established models = 0.0406389 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.0406389 Jy ! Inverting map and beam ! Estimated beam: bmin=3.306 mas, bmaj=8.194 mas, bpa=-7.01 degrees ! Estimated noise=498.675 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.5, 6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00230629 Jy ! Component: 100 - total flux cleaned = 0.00327604 Jy ! Component: 150 - total flux cleaned = 0.00374317 Jy ! Component: 200 - total flux cleaned = 0.00410453 Jy ! Total flux subtracted in 200 components = 0.00410453 Jy ! Clean residual min=-0.001381 max=0.001347 Jy/beam ! Clean residual mean=0.000001 rms=0.000365 Jy/beam ! Combined flux in latest and established models = 0.0447434 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 45 components and 0.0447434 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.414 mas, bmaj=13.76 mas, bpa=-1.106 degrees ! Estimated noise=635.964 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000801339 Jy ! Component: 100 - total flux cleaned = 0.00107811 Jy ! Component: 150 - total flux cleaned = 0.0013422 Jy ! Component: 200 - total flux cleaned = 0.00153548 Jy ! Total flux subtracted in 200 components = 0.00153548 Jy ! Clean residual min=-0.001628 max=0.001320 Jy/beam ! Clean residual mean=0.000003 rms=0.000399 Jy/beam ! Combined flux in latest and established models = 0.0462789 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.90236e-05 Jy ! Component: 100 - total flux cleaned = 8.11137e-05 Jy ! Component: 150 - total flux cleaned = 0.000127996 Jy ! Component: 200 - total flux cleaned = 0.00014878 Jy ! Total flux subtracted in 200 components = 0.00014878 Jy ! Clean residual min=-0.001603 max=0.001234 Jy/beam ! Clean residual mean=0.000004 rms=0.000376 Jy/beam ! Combined flux in latest and established models = 0.0464277 Jy ! Adding 61 model components to the UV plane model. ! The established model now contains 101 components and 0.0464277 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.306 mas, bmaj=8.194 mas, bpa=-7.01 degrees ! Estimated noise=498.675 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.22099e-05 Jy ! Component: 100 - total flux cleaned = 1.35938e-05 Jy ! Component: 150 - total flux cleaned = 1.60213e-05 Jy ! Component: 200 - total flux cleaned = 1.53064e-05 Jy ! Total flux subtracted in 200 components = 1.53064e-05 Jy ! Clean residual min=-0.001172 max=0.001381 Jy/beam ! Clean residual mean=0.000002 rms=0.000303 Jy/beam ! Combined flux in latest and established models = 0.046443 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 120 components and 0.046443 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081343Jy sigma=0.000634 ! Fit after self-cal, rms=0.081337Jy sigma=0.000634 wmodel J1128-1122_S_2017_05_27_pus_map.mod ! Writing 120 model components to file: J1128-1122_S_2017_05_27_pus_map.mod wobs J1128-1122_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J1128-1122_S_2017_05_27_pus_uvs.fits wwins J1128-1122_S_2017_05_27_pus_map.win ! wwins: Wrote 4 windows to J1128-1122_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -3.66788e-05 Jy ! Component: 100 - total flux cleaned = -5.65942e-05 Jy ! Component: 150 - total flux cleaned = -0.000113694 Jy ! Component: 200 - total flux cleaned = -0.000150131 Jy ! Component: 250 - total flux cleaned = -0.000203401 Jy ! Component: 300 - total flux cleaned = -0.000238315 Jy ! Component: 350 - total flux cleaned = -0.000323001 Jy ! Component: 400 - total flux cleaned = -0.000372605 Jy ! Component: 450 - total flux cleaned = -0.0004536 Jy ! Component: 500 - total flux cleaned = -0.000453888 Jy ! Component: 550 - total flux cleaned = -0.00045385 Jy ! Component: 600 - total flux cleaned = -0.000453501 Jy ! Component: 650 - total flux cleaned = -0.000378553 Jy ! Component: 700 - total flux cleaned = -0.00031966 Jy ! Component: 750 - total flux cleaned = -0.000276281 Jy ! Component: 800 - total flux cleaned = -0.0002335 Jy ! Component: 850 - total flux cleaned = -0.00019129 Jy ! Component: 900 - total flux cleaned = -0.00017712 Jy ! Component: 950 - total flux cleaned = -0.000163363 Jy ! Component: 1000 - total flux cleaned = -0.000123077 Jy ! Component: 1050 - total flux cleaned = -0.000162725 Jy ! Component: 1100 - total flux cleaned = -0.000227823 Jy ! Component: 1150 - total flux cleaned = -0.000240653 Jy ! Component: 1200 - total flux cleaned = -0.000304046 Jy ! Component: 1250 - total flux cleaned = -0.000316411 Jy ! Component: 1300 - total flux cleaned = -0.000341127 Jy ! Component: 1350 - total flux cleaned = -0.000389802 Jy ! Component: 1400 - total flux cleaned = -0.00037776 Jy ! Component: 1450 - total flux cleaned = -0.000413536 Jy ! Component: 1500 - total flux cleaned = -0.00041377 Jy ! Component: 1550 - total flux cleaned = -0.000448853 Jy ! Component: 1600 - total flux cleaned = -0.000494667 Jy ! Component: 1650 - total flux cleaned = -0.000483088 Jy ! Component: 1700 - total flux cleaned = -0.00051646 Jy ! Component: 1750 - total flux cleaned = -0.000494402 Jy ! Component: 1800 - total flux cleaned = -0.000461881 Jy ! Component: 1850 - total flux cleaned = -0.000483611 Jy ! Component: 1900 - total flux cleaned = -0.000504997 Jy ! Component: 1950 - total flux cleaned = -0.000505191 Jy ! Component: 2000 - total flux cleaned = -0.000526093 Jy ! Component: 2050 - total flux cleaned = -0.000515878 Jy ! Component: 2100 - total flux cleaned = -0.000546228 Jy ! Component: 2150 - total flux cleaned = -0.000546019 Jy ! Component: 2200 - total flux cleaned = -0.000496172 Jy ! Component: 2250 - total flux cleaned = -0.000515887 Jy ! Component: 2300 - total flux cleaned = -0.000535389 Jy ! Component: 2350 - total flux cleaned = -0.000516096 Jy ! Component: 2400 - total flux cleaned = -0.000506649 Jy ! Component: 2450 - total flux cleaned = -0.000525713 Jy ! Component: 2500 - total flux cleaned = -0.000516487 Jy ! Component: 2550 - total flux cleaned = -0.000488541 Jy ! Component: 2600 - total flux cleaned = -0.000497776 Jy ! Component: 2650 - total flux cleaned = -0.000525009 Jy ! Component: 2700 - total flux cleaned = -0.000524955 Jy ! Component: 2750 - total flux cleaned = -0.00052488 Jy ! Component: 2800 - total flux cleaned = -0.00052506 Jy ! Component: 2850 - total flux cleaned = -0.000533842 Jy ! Component: 2900 - total flux cleaned = -0.000542573 Jy ! Component: 2950 - total flux cleaned = -0.000577012 Jy ! Component: 3000 - total flux cleaned = -0.000602737 Jy ! Component: 3050 - total flux cleaned = -0.000619743 Jy ! Component: 3100 - total flux cleaned = -0.000628114 Jy ! Component: 3150 - total flux cleaned = -0.000627974 Jy ! Component: 3200 - total flux cleaned = -0.000619812 Jy ! Component: 3250 - total flux cleaned = -0.000636226 Jy ! Component: 3300 - total flux cleaned = -0.000652432 Jy ! Component: 3350 - total flux cleaned = -0.000620225 Jy ! Component: 3400 - total flux cleaned = -0.000644338 Jy ! Component: 3450 - total flux cleaned = -0.000660114 Jy ! Component: 3500 - total flux cleaned = -0.000660079 Jy ! Component: 3550 - total flux cleaned = -0.000683479 Jy ! Component: 3600 - total flux cleaned = -0.000660264 Jy ! Component: 3650 - total flux cleaned = -0.000706378 Jy ! Component: 3700 - total flux cleaned = -0.000698739 Jy ! Component: 3750 - total flux cleaned = -0.000736569 Jy ! Component: 3800 - total flux cleaned = -0.000729118 Jy ! Component: 3850 - total flux cleaned = -0.000751491 Jy ! Component: 3900 - total flux cleaned = -0.000766324 Jy ! Component: 3950 - total flux cleaned = -0.000817684 Jy ! Component: 4000 - total flux cleaned = -0.000817637 Jy ! Component: 4050 - total flux cleaned = -0.000846473 Jy ! Total flux subtracted in 4096 components = -0.000839264 Jy ! Clean residual min=-0.000403 max=0.000371 Jy/beam ! Clean residual mean=0.000001 rms=0.000130 Jy/beam ! Combined flux in latest and established models = 0.0456037 Jy keep ! Adding 275 model components to the UV plane model. ! The established model now contains 395 components and 0.0456038 Jy ![Exited script file: muppet] wmap "J1128-1122_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.306 x 8.194 at -7.01 degrees (North through East) ! Clean map min=-0.0013002 max=0.033214 Jy/beam ! Writing clean map to FITS file: J1128-1122_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0332141 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000126472 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.14233 1.14233 2.28466 4.56932 9.13865 18.2773 36.5546 73.1092 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.033 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.306 x 8.194 at -7.01 degrees (North through East) ! Clean map min=-0.0013002 max=0.033214 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1128-1122_S_2017_05_27_pus_uvs.log closed on Fri May 3 11:05:05 2019