! Started logfile: J1128+2326_S_2017_09_26_pus_uvs.log on Sat May 11 13:00:46 2019 obs J1128+2326_S_2017_09_26_pus_uva.fits ! Reading UV FITS file: J1128+2326_S_2017_09_26_pus_uva.fits ! AN table 1: 175 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.775238 visibilities/baseline/integration-bin. ! Found source: J1128+2326 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 674 lines of history. ! ! Reading 19536 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1128+2326_S_2017_09_26_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 275 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 278 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 204 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 919 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.939561Jy sigma=0.008502 ! Fit after self-cal, rms=0.927049Jy sigma=0.008391 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.149 mas, bmaj=8.277 mas, bpa=-25.04 degrees ! Estimated noise=1298.78 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0561814 Jy ! Component: 100 - total flux cleaned = 0.0742382 Jy ! Total flux subtracted in 100 components = 0.0742382 Jy ! Clean residual min=-0.004607 max=0.008006 Jy/beam ! Clean residual mean=-0.000035 rms=0.001444 Jy/beam ! Combined flux in latest and established models = 0.0742382 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0742382 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077969Jy sigma=0.000667 ! Fit after self-cal, rms=0.077828Jy sigma=0.000667 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00925867 Jy ! Component: 100 - total flux cleaned = 0.013906 Jy ! Total flux subtracted in 100 components = 0.013906 Jy ! Clean residual min=-0.003685 max=0.005496 Jy/beam ! Clean residual mean=-0.000018 rms=0.001029 Jy/beam ! Combined flux in latest and established models = 0.0881441 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 15 components and 0.0881441 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076730Jy sigma=0.000658 ! Fit after self-cal, rms=0.076690Jy sigma=0.000657 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.768 mas, bmaj=9.077 mas, bpa=-22.42 degrees ! Estimated noise=666.044 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (13, -5.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00563594 Jy ! Component: 100 - total flux cleaned = 0.00798463 Jy ! Component: 150 - total flux cleaned = 0.00958395 Jy ! Component: 200 - total flux cleaned = 0.0107847 Jy ! Total flux subtracted in 200 components = 0.0107847 Jy ! Clean residual min=-0.002437 max=0.002784 Jy/beam ! Clean residual mean=-0.000015 rms=0.000672 Jy/beam ! Combined flux in latest and established models = 0.0989288 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 59 components and 0.0989288 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076304Jy sigma=0.000654 ! Fit after self-cal, rms=0.076210Jy sigma=0.000653 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00* HN 1.03 KP 1.10 ! LA 1.00 MK 0.99 NL 0.92 OV 1.02 ! PT 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.22 FD 1.03 HN 1.00 KP 1.03 ! LA 0.95 MK 0.98 NL 1.04 OV 1.01 ! PT 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.10 HN 0.99 KP 1.02 ! LA 0.97 MK 1.07 NL 1.02 OV 1.04 ! PT 0.94 ! ! ! Correcting IF 4. ! A total of 84 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.93 HN 0.93 KP 1.00* ! LA 0.89 MK 0.80 NL 1.00* OV 1.00* ! PT 1.01 ! ! ! Fit before self-cal, rms=0.076210Jy sigma=0.000653 ! Fit after self-cal, rms=0.075974Jy sigma=0.000651 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.777 mas, bmaj=9.113 mas, bpa=-22.26 degrees ! Estimated noise=666.284 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00122985 Jy ! Component: 100 - total flux cleaned = 0.00123782 Jy ! Component: 150 - total flux cleaned = 0.00120111 Jy ! Component: 200 - total flux cleaned = 0.00119803 Jy ! Total flux subtracted in 200 components = 0.00119803 Jy ! Clean residual min=-0.001779 max=0.002079 Jy/beam ! Clean residual mean=-0.000010 rms=0.000504 Jy/beam ! Combined flux in latest and established models = 0.100127 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 78 components and 0.100127 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075920Jy sigma=0.000650 ! Fit after self-cal, rms=0.075926Jy sigma=0.000650 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075926Jy sigma=0.000650 ! Fit after self-cal, rms=0.075992Jy sigma=0.000649 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.759 mas, bmaj=9.102 mas, bpa=-22.28 degrees ! Estimated noise=664.872 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000771211 Jy ! Component: 100 - total flux cleaned = 0.000954954 Jy ! Component: 150 - total flux cleaned = 0.0011617 Jy ! Component: 200 - total flux cleaned = 0.00130368 Jy ! Total flux subtracted in 200 components = 0.00130368 Jy ! Clean residual min=-0.001787 max=0.001961 Jy/beam ! Clean residual mean=-0.000007 rms=0.000463 Jy/beam ! Combined flux in latest and established models = 0.101431 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 91 components and 0.101431 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075975Jy sigma=0.000649 ! Fit after self-cal, rms=0.075983Jy sigma=0.000649 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (7, 43.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00187779 Jy ! Component: 100 - total flux cleaned = 0.00303872 Jy ! Component: 150 - total flux cleaned = 0.00389568 Jy ! Component: 200 - total flux cleaned = 0.00443867 Jy ! Total flux subtracted in 200 components = 0.00443867 Jy ! Clean residual min=-0.001524 max=0.001631 Jy/beam ! Clean residual mean=-0.000008 rms=0.000388 Jy/beam ! Combined flux in latest and established models = 0.105869 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 120 components and 0.105869 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075927Jy sigma=0.000649 ! Fit after self-cal, rms=0.075908Jy sigma=0.000649 ! Inverting map ! Added new window around map position (85, -49). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000950763 Jy ! Component: 100 - total flux cleaned = 0.0013862 Jy ! Component: 150 - total flux cleaned = 0.00183476 Jy ! Component: 200 - total flux cleaned = 0.00226825 Jy ! Total flux subtracted in 200 components = 0.00226825 Jy ! Clean residual min=-0.001416 max=0.001308 Jy/beam ! Clean residual mean=-0.000007 rms=0.000341 Jy/beam ! Combined flux in latest and established models = 0.108137 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 137 components and 0.108137 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075868Jy sigma=0.000648 ! Fit after self-cal, rms=0.075861Jy sigma=0.000648 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075861Jy sigma=0.000648 ! Fit after self-cal, rms=0.075562Jy sigma=0.000648 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.752 mas, bmaj=9.096 mas, bpa=-22.1 degrees ! Estimated noise=661.601 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000662503 Jy ! Component: 100 - total flux cleaned = 0.00103305 Jy ! Component: 150 - total flux cleaned = 0.0013081 Jy ! Component: 200 - total flux cleaned = 0.00158647 Jy ! Total flux subtracted in 200 components = 0.00158647 Jy ! Clean residual min=-0.001394 max=0.001209 Jy/beam ! Clean residual mean=-0.000006 rms=0.000315 Jy/beam ! Combined flux in latest and established models = 0.109724 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 157 components and 0.109724 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075541Jy sigma=0.000648 ! Fit after self-cal, rms=0.075539Jy sigma=0.000648 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000302265 Jy ! Component: 100 - total flux cleaned = 0.000544682 Jy ! Component: 150 - total flux cleaned = 0.000811563 Jy ! Component: 200 - total flux cleaned = 0.000998877 Jy ! Total flux subtracted in 200 components = 0.000998877 Jy ! Clean residual min=-0.001299 max=0.001163 Jy/beam ! Clean residual mean=-0.000006 rms=0.000303 Jy/beam ! Combined flux in latest and established models = 0.110723 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 168 components and 0.110723 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075527Jy sigma=0.000648 ! Fit after self-cal, rms=0.075523Jy sigma=0.000648 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075523Jy sigma=0.000648 ! Fit after self-cal, rms=0.075547Jy sigma=0.000648 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.615 mas, bmaj=11.03 mas, bpa=-22.18 degrees ! Estimated noise=793.566 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000677723 Jy ! Component: 100 - total flux cleaned = 0.00100122 Jy ! Component: 150 - total flux cleaned = 0.0012067 Jy ! Component: 200 - total flux cleaned = 0.00137432 Jy ! Total flux subtracted in 200 components = 0.00137432 Jy ! Clean residual min=-0.001384 max=0.001116 Jy/beam ! Clean residual mean=-0.000008 rms=0.000348 Jy/beam ! Combined flux in latest and established models = 0.112097 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 187 components and 0.112097 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075539Jy sigma=0.000648 ! Fit after self-cal, rms=0.075535Jy sigma=0.000648 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000361237 Jy ! Component: 100 - total flux cleaned = 0.00059617 Jy ! Component: 150 - total flux cleaned = 0.000746068 Jy ! Component: 200 - total flux cleaned = 0.000886184 Jy ! Total flux subtracted in 200 components = 0.000886184 Jy ! Clean residual min=-0.001344 max=0.001065 Jy/beam ! Clean residual mean=-0.000008 rms=0.000331 Jy/beam ! Combined flux in latest and established models = 0.112983 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 199 components and 0.112983 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075531Jy sigma=0.000648 ! Fit after self-cal, rms=0.075529Jy sigma=0.000648 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.75 mas, bmaj=9.093 mas, bpa=-22.04 degrees ! Estimated noise=661.591 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.75 x 9.093 at -22.04 degrees (North through East) ! Clean map min=-0.001211 max=0.072865 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.133 mas, bmaj=8.271 mas, bpa=-24.15 degrees ! Estimated noise=1286.53 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0552839 Jy ! Component: 100 - total flux cleaned = 0.0746863 Jy ! Component: 150 - total flux cleaned = 0.084974 Jy ! Component: 200 - total flux cleaned = 0.0909893 Jy ! Total flux subtracted in 200 components = 0.0909893 Jy ! Clean residual min=-0.003708 max=0.003731 Jy/beam ! Clean residual mean=-0.000014 rms=0.000943 Jy/beam ! Combined flux in latest and established models = 0.0909893 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.0909893 Jy ! Inverting map and beam ! Estimated beam: bmin=3.75 mas, bmaj=9.093 mas, bpa=-22.04 degrees ! Estimated noise=661.591 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.004277 Jy ! Component: 100 - total flux cleaned = 0.00707108 Jy ! Component: 150 - total flux cleaned = 0.00929195 Jy ! Component: 200 - total flux cleaned = 0.0111886 Jy ! Total flux subtracted in 200 components = 0.0111886 Jy ! Clean residual min=-0.001750 max=0.001779 Jy/beam ! Clean residual mean=-0.000010 rms=0.000491 Jy/beam ! Combined flux in latest and established models = 0.102178 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 53 components and 0.102178 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.615 mas, bmaj=11.03 mas, bpa=-22.18 degrees ! Estimated noise=793.566 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00226922 Jy ! Component: 100 - total flux cleaned = 0.00400868 Jy ! Component: 150 - total flux cleaned = 0.00543275 Jy ! Component: 200 - total flux cleaned = 0.00665575 Jy ! Total flux subtracted in 200 components = 0.00665575 Jy ! Clean residual min=-0.001836 max=0.001599 Jy/beam ! Clean residual mean=-0.000011 rms=0.000474 Jy/beam ! Combined flux in latest and established models = 0.108834 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000853212 Jy ! Component: 100 - total flux cleaned = 0.00146374 Jy ! Component: 150 - total flux cleaned = 0.00198341 Jy ! Component: 200 - total flux cleaned = 0.00239618 Jy ! Total flux subtracted in 200 components = 0.00239618 Jy ! Clean residual min=-0.001635 max=0.001352 Jy/beam ! Clean residual mean=-0.000009 rms=0.000402 Jy/beam ! Combined flux in latest and established models = 0.11123 Jy ! Adding 82 model components to the UV plane model. ! The established model now contains 125 components and 0.11123 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.75 mas, bmaj=9.093 mas, bpa=-22.04 degrees ! Estimated noise=661.591 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.05614e-05 Jy ! Component: 100 - total flux cleaned = 0.000272283 Jy ! Component: 150 - total flux cleaned = 0.000515153 Jy ! Component: 200 - total flux cleaned = 0.000730966 Jy ! Total flux subtracted in 200 components = 0.000730966 Jy ! Clean residual min=-0.001298 max=0.001294 Jy/beam ! Clean residual mean=-0.000006 rms=0.000321 Jy/beam ! Combined flux in latest and established models = 0.111961 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 144 components and 0.111961 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075551Jy sigma=0.000648 ! Fit after self-cal, rms=0.075544Jy sigma=0.000648 wmodel J1128+2326_S_2017_09_26_pus_map.mod ! Writing 144 model components to file: J1128+2326_S_2017_09_26_pus_map.mod wobs J1128+2326_S_2017_09_26_pus_uvs.fits ! Writing UV FITS file: J1128+2326_S_2017_09_26_pus_uvs.fits wwins J1128+2326_S_2017_09_26_pus_map.win ! wwins: Wrote 4 windows to J1128+2326_S_2017_09_26_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000284741 Jy ! Component: 100 - total flux cleaned = -0.000263333 Jy ! Component: 150 - total flux cleaned = -0.000323291 Jy ! Component: 200 - total flux cleaned = -0.000435705 Jy ! Component: 250 - total flux cleaned = -0.000581062 Jy ! Component: 300 - total flux cleaned = -0.000720176 Jy ! Component: 350 - total flux cleaned = -0.000854698 Jy ! Component: 400 - total flux cleaned = -0.000984712 Jy ! Component: 450 - total flux cleaned = -0.00109501 Jy ! Component: 500 - total flux cleaned = -0.00120247 Jy ! Component: 550 - total flux cleaned = -0.0013071 Jy ! Component: 600 - total flux cleaned = -0.00138014 Jy ! Component: 650 - total flux cleaned = -0.00152295 Jy ! Component: 700 - total flux cleaned = -0.00159274 Jy ! Component: 750 - total flux cleaned = -0.00170219 Jy ! Component: 800 - total flux cleaned = -0.00182295 Jy ! Component: 850 - total flux cleaned = -0.0019019 Jy ! Component: 900 - total flux cleaned = -0.00197966 Jy ! Component: 950 - total flux cleaned = -0.00204344 Jy ! Component: 1000 - total flux cleaned = -0.00206863 Jy ! Component: 1050 - total flux cleaned = -0.00215565 Jy ! Component: 1100 - total flux cleaned = -0.00224109 Jy ! Component: 1150 - total flux cleaned = -0.002253 Jy ! Component: 1200 - total flux cleaned = -0.00231264 Jy ! Component: 1250 - total flux cleaned = -0.00235978 Jy ! Component: 1300 - total flux cleaned = -0.00241793 Jy ! Component: 1350 - total flux cleaned = -0.00248673 Jy ! Component: 1400 - total flux cleaned = -0.00257719 Jy ! Component: 1450 - total flux cleaned = -0.00265518 Jy ! Component: 1500 - total flux cleaned = -0.00273226 Jy ! Component: 1550 - total flux cleaned = -0.00283017 Jy ! Component: 1600 - total flux cleaned = -0.00286226 Jy ! Component: 1650 - total flux cleaned = -0.00292599 Jy ! Component: 1700 - total flux cleaned = -0.00298896 Jy ! Component: 1750 - total flux cleaned = -0.00308239 Jy ! Component: 1800 - total flux cleaned = -0.00318501 Jy ! Component: 1850 - total flux cleaned = -0.003256 Jy ! Component: 1900 - total flux cleaned = -0.0033464 Jy ! Component: 1950 - total flux cleaned = -0.00342608 Jy ! Component: 2000 - total flux cleaned = -0.00353427 Jy ! Component: 2050 - total flux cleaned = -0.00362189 Jy ! Component: 2100 - total flux cleaned = -0.00372794 Jy ! Component: 2150 - total flux cleaned = -0.00379486 Jy ! Component: 2200 - total flux cleaned = -0.00389903 Jy ! Component: 2250 - total flux cleaned = -0.00401154 Jy ! Component: 2300 - total flux cleaned = -0.00408582 Jy ! Component: 2350 - total flux cleaned = -0.00415031 Jy ! Component: 2400 - total flux cleaned = -0.0042597 Jy ! Component: 2450 - total flux cleaned = -0.00433196 Jy ! Component: 2500 - total flux cleaned = -0.00442149 Jy ! Component: 2550 - total flux cleaned = -0.00448365 Jy ! Component: 2600 - total flux cleaned = -0.00454521 Jy ! Component: 2650 - total flux cleaned = -0.00458024 Jy ! Component: 2700 - total flux cleaned = -0.00466694 Jy ! Component: 2750 - total flux cleaned = -0.00471852 Jy ! Component: 2800 - total flux cleaned = -0.00477827 Jy ! Component: 2850 - total flux cleaned = -0.00481225 Jy ! Component: 2900 - total flux cleaned = -0.00483743 Jy ! Component: 2950 - total flux cleaned = -0.00490411 Jy ! Component: 3000 - total flux cleaned = -0.0049041 Jy ! Component: 3050 - total flux cleaned = -0.00491243 Jy ! Component: 3100 - total flux cleaned = -0.00497775 Jy ! Component: 3150 - total flux cleaned = -0.00501821 Jy ! Component: 3200 - total flux cleaned = -0.00505839 Jy ! Component: 3250 - total flux cleaned = -0.00505848 Jy ! Component: 3300 - total flux cleaned = -0.0050982 Jy ! Component: 3350 - total flux cleaned = -0.00513764 Jy ! Component: 3400 - total flux cleaned = -0.00518463 Jy ! Component: 3450 - total flux cleaned = -0.0052002 Jy ! Component: 3500 - total flux cleaned = -0.00523116 Jy ! Component: 3550 - total flux cleaned = -0.00526184 Jy ! Component: 3600 - total flux cleaned = -0.00526182 Jy ! Component: 3650 - total flux cleaned = -0.00524666 Jy ! Component: 3700 - total flux cleaned = -0.00528451 Jy ! Component: 3750 - total flux cleaned = -0.00530705 Jy ! Component: 3800 - total flux cleaned = -0.00531458 Jy ! Component: 3850 - total flux cleaned = -0.00532949 Jy ! Component: 3900 - total flux cleaned = -0.00535906 Jy ! Component: 3950 - total flux cleaned = -0.00537378 Jy ! Component: 4000 - total flux cleaned = -0.00540303 Jy ! Component: 4050 - total flux cleaned = -0.00541748 Jy ! Total flux subtracted in 4096 components = -0.00540295 Jy ! Clean residual min=-0.000509 max=0.000515 Jy/beam ! Clean residual mean=-0.000002 rms=0.000129 Jy/beam ! Combined flux in latest and established models = 0.106558 Jy keep ! Adding 263 model components to the UV plane model. ! The established model now contains 407 components and 0.106558 Jy ![Exited script file: muppet] wmap "J1128+2326_S_2017_09_26_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.75 x 9.093 at -22.04 degrees (North through East) ! Clean map min=-0.00096685 max=0.072302 Jy/beam ! Writing clean map to FITS file: J1128+2326_S_2017_09_26_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0723016 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000128141 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.531692 0.531692 1.06338 2.12677 4.25354 8.50707 17.0141 34.0283 68.0566 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.072 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.75 x 9.093 at -22.04 degrees (North through East) ! Clean map min=-0.00096685 max=0.072302 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1128+2326_S_2017_09_26_pus_uvs.log closed on Sat May 11 13:00:51 2019