! Started logfile: J1128+1039_S_2017_10_09_pus_uvs.log on Sun May 12 13:10:56 2019 obs J1128+1039_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J1128+1039_S_2017_10_09_pus_uva.fits ! AN table 1: 144 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.463156 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1128+1039 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 9604 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1128+1039_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 623 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 681 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 623 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 989 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.992595Jy sigma=0.008897 ! Fit after self-cal, rms=0.957815Jy sigma=0.008566 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.907 mas, bmaj=11.35 mas, bpa=-19.57 degrees ! Estimated noise=1187.17 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0339334 Jy ! Component: 100 - total flux cleaned = 0.0413558 Jy ! Total flux subtracted in 100 components = 0.0413558 Jy ! Clean residual min=-0.003456 max=0.003103 Jy/beam ! Clean residual mean=-0.000003 rms=0.000797 Jy/beam ! Combined flux in latest and established models = 0.0413558 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.0413558 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075370Jy sigma=0.000629 ! Fit after self-cal, rms=0.074169Jy sigma=0.000618 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.433 mas, bmaj=11.69 mas, bpa=-19.89 degrees ! Estimated noise=961.655 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00381414 Jy ! Component: 100 - total flux cleaned = 0.00436338 Jy ! Component: 150 - total flux cleaned = 0.00462699 Jy ! Component: 200 - total flux cleaned = 0.00475602 Jy ! Total flux subtracted in 200 components = 0.00475602 Jy ! Clean residual min=-0.002076 max=0.002382 Jy/beam ! Clean residual mean=-0.000002 rms=0.000555 Jy/beam ! Combined flux in latest and established models = 0.0461118 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 26 components and 0.0461118 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073855Jy sigma=0.000616 ! Fit after self-cal, rms=0.073786Jy sigma=0.000616 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.03 HN 1.06 KP 1.01 ! LA 1.01 MK 1.04 NL 1.00 OV 1.00* ! PT 1.09 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.96 HN 1.02 KP 1.01 ! LA 0.98 MK 1.02 NL 1.01 OV 1.00* ! PT 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.05 HN 1.01 KP 0.83 ! LA 0.79 MK 1.06 NL 1.10 OV 1.00* ! PT 1.07 ! ! ! Correcting IF 4. ! A total of 51 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.79 HN 0.88 KP 1.00* ! LA 1.00* MK 0.96 NL 1.00* OV 1.00* ! PT 0.96 ! ! ! Fit before self-cal, rms=0.073786Jy sigma=0.000616 ! Fit after self-cal, rms=0.071390Jy sigma=0.000613 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.464 mas, bmaj=11.56 mas, bpa=-19.73 degrees ! Estimated noise=960.281 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000503035 Jy ! Component: 100 - total flux cleaned = -0.000455587 Jy ! Component: 150 - total flux cleaned = -0.000457527 Jy ! Component: 200 - total flux cleaned = -0.000414299 Jy ! Total flux subtracted in 200 components = -0.000414299 Jy ! Clean residual min=-0.001693 max=0.001692 Jy/beam ! Clean residual mean=-0.000003 rms=0.000451 Jy/beam ! Combined flux in latest and established models = 0.0456975 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 38 components and 0.0456975 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071356Jy sigma=0.000613 ! Fit after self-cal, rms=0.071235Jy sigma=0.000612 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071235Jy sigma=0.000612 ! Fit after self-cal, rms=0.070646Jy sigma=0.000612 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.504 mas, bmaj=11.51 mas, bpa=-19.69 degrees ! Estimated noise=958.186 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000139771 Jy ! Component: 100 - total flux cleaned = -9.32061e-05 Jy ! Component: 150 - total flux cleaned = -5.19295e-05 Jy ! Component: 200 - total flux cleaned = -7.03758e-05 Jy ! Total flux subtracted in 200 components = -7.03758e-05 Jy ! Clean residual min=-0.001798 max=0.001641 Jy/beam ! Clean residual mean=-0.000001 rms=0.000430 Jy/beam ! Combined flux in latest and established models = 0.0456271 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 48 components and 0.0456271 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070629Jy sigma=0.000612 ! Fit after self-cal, rms=0.070588Jy sigma=0.000611 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000103907 Jy ! Component: 100 - total flux cleaned = 0.000225014 Jy ! Component: 150 - total flux cleaned = 0.000265655 Jy ! Component: 200 - total flux cleaned = 0.000248744 Jy ! Total flux subtracted in 200 components = 0.000248744 Jy ! Clean residual min=-0.001837 max=0.001750 Jy/beam ! Clean residual mean=-0.000002 rms=0.000434 Jy/beam ! Combined flux in latest and established models = 0.0458759 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 53 components and 0.0458759 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070576Jy sigma=0.000611 ! Fit after self-cal, rms=0.070563Jy sigma=0.000611 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070563Jy sigma=0.000611 ! Fit after self-cal, rms=0.070560Jy sigma=0.000611 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.512 mas, bmaj=11.5 mas, bpa=-19.7 degrees ! Estimated noise=957.254 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.16908e-05 Jy ! Component: 100 - total flux cleaned = 6.36875e-05 Jy ! Component: 150 - total flux cleaned = 6.25132e-05 Jy ! Component: 200 - total flux cleaned = 4.52246e-05 Jy ! Total flux subtracted in 200 components = 4.52246e-05 Jy ! Clean residual min=-0.001846 max=0.001765 Jy/beam ! Clean residual mean=-0.000001 rms=0.000431 Jy/beam ! Combined flux in latest and established models = 0.0459211 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 56 components and 0.0459211 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070550Jy sigma=0.000611 ! Fit after self-cal, rms=0.070553Jy sigma=0.000611 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.752e-05 Jy ! Component: 100 - total flux cleaned = 6.67743e-05 Jy ! Component: 150 - total flux cleaned = 6.67579e-05 Jy ! Component: 200 - total flux cleaned = 5.16823e-05 Jy ! Total flux subtracted in 200 components = 5.16823e-05 Jy ! Clean residual min=-0.001786 max=0.001763 Jy/beam ! Clean residual mean=-0.000002 rms=0.000431 Jy/beam ! Combined flux in latest and established models = 0.0459728 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 60 components and 0.0459728 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070545Jy sigma=0.000611 ! Fit after self-cal, rms=0.070544Jy sigma=0.000611 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070544Jy sigma=0.000611 ! Fit after self-cal, rms=0.070502Jy sigma=0.000611 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.579 mas, bmaj=11.98 mas, bpa=-20.21 degrees ! Estimated noise=1163.94 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000260782 Jy ! Component: 100 - total flux cleaned = 0.000227706 Jy ! Component: 150 - total flux cleaned = 0.000227726 Jy ! Component: 200 - total flux cleaned = 0.000239577 Jy ! Total flux subtracted in 200 components = 0.000239577 Jy ! Clean residual min=-0.001796 max=0.002096 Jy/beam ! Clean residual mean=-0.000003 rms=0.000523 Jy/beam ! Combined flux in latest and established models = 0.0462124 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 70 components and 0.0462124 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070499Jy sigma=0.000611 ! Fit after self-cal, rms=0.070507Jy sigma=0.000611 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.65899e-05 Jy ! Component: 100 - total flux cleaned = -5.22468e-06 Jy ! Component: 150 - total flux cleaned = -5.29292e-06 Jy ! Component: 200 - total flux cleaned = -5.21141e-06 Jy ! Total flux subtracted in 200 components = -5.21141e-06 Jy ! Clean residual min=-0.001746 max=0.002015 Jy/beam ! Clean residual mean=-0.000003 rms=0.000508 Jy/beam ! Combined flux in latest and established models = 0.0462072 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 76 components and 0.0462072 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070504Jy sigma=0.000610 ! Fit after self-cal, rms=0.070503Jy sigma=0.000610 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.517 mas, bmaj=11.49 mas, bpa=-19.71 degrees ! Estimated noise=956.134 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.517 x 11.49 at -19.71 degrees (North through East) ! Clean map min=-0.0051445 max=0.045506 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.955 mas, bmaj=11.2 mas, bpa=-19.46 degrees ! Estimated noise=1183.48 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0351515 Jy ! Component: 100 - total flux cleaned = 0.0402468 Jy ! Component: 150 - total flux cleaned = 0.0421307 Jy ! Component: 200 - total flux cleaned = 0.0431448 Jy ! Total flux subtracted in 200 components = 0.0431448 Jy ! Clean residual min=-0.002838 max=0.002588 Jy/beam ! Clean residual mean=-0.000003 rms=0.000698 Jy/beam ! Combined flux in latest and established models = 0.0431448 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.0431448 Jy ! Inverting map and beam ! Estimated beam: bmin=3.517 mas, bmaj=11.49 mas, bpa=-19.71 degrees ! Estimated noise=956.134 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (87, 105). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00102976 Jy ! Component: 100 - total flux cleaned = 0.00191 Jy ! Component: 150 - total flux cleaned = 0.00230864 Jy ! Component: 200 - total flux cleaned = 0.00245391 Jy ! Total flux subtracted in 200 components = 0.00245391 Jy ! Clean residual min=-0.001937 max=0.001695 Jy/beam ! Clean residual mean=-0.000002 rms=0.000451 Jy/beam ! Combined flux in latest and established models = 0.0455988 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 33 components and 0.0455987 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.579 mas, bmaj=11.98 mas, bpa=-20.21 degrees ! Estimated noise=1163.94 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000835663 Jy ! Component: 100 - total flux cleaned = 0.000938145 Jy ! Component: 150 - total flux cleaned = 0.000969001 Jy ! Component: 200 - total flux cleaned = 0.00102344 Jy ! Total flux subtracted in 200 components = 0.00102344 Jy ! Clean residual min=-0.001696 max=0.001727 Jy/beam ! Clean residual mean=-0.000002 rms=0.000476 Jy/beam ! Combined flux in latest and established models = 0.0466222 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.51287e-05 Jy ! Component: 100 - total flux cleaned = 7.12469e-05 Jy ! Component: 150 - total flux cleaned = 9.24607e-05 Jy ! Component: 200 - total flux cleaned = 0.000113102 Jy ! Total flux subtracted in 200 components = 0.000113102 Jy ! Clean residual min=-0.001599 max=0.001690 Jy/beam ! Clean residual mean=-0.000002 rms=0.000459 Jy/beam ! Combined flux in latest and established models = 0.0467353 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 67 components and 0.0467353 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.517 mas, bmaj=11.49 mas, bpa=-19.71 degrees ! Estimated noise=956.134 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.61025e-05 Jy ! Component: 100 - total flux cleaned = -0.000145658 Jy ! Component: 150 - total flux cleaned = -0.000146234 Jy ! Component: 200 - total flux cleaned = -0.000170955 Jy ! Total flux subtracted in 200 components = -0.000170955 Jy ! Clean residual min=-0.001466 max=0.001453 Jy/beam ! Clean residual mean=-0.000001 rms=0.000397 Jy/beam ! Combined flux in latest and established models = 0.0465643 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 81 components and 0.0465643 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070473Jy sigma=0.000610 ! Fit after self-cal, rms=0.070435Jy sigma=0.000610 wmodel J1128+1039_S_2017_10_09_pus_map.mod ! Writing 81 model components to file: J1128+1039_S_2017_10_09_pus_map.mod wobs J1128+1039_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J1128+1039_S_2017_10_09_pus_uvs.fits wwins J1128+1039_S_2017_10_09_pus_map.win ! wwins: Wrote 2 windows to J1128+1039_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -6.75509e-05 Jy ! Component: 100 - total flux cleaned = 1.25067e-05 Jy ! Component: 150 - total flux cleaned = 0.000216866 Jy ! Component: 200 - total flux cleaned = 0.000338741 Jy ! Component: 250 - total flux cleaned = 0.000456773 Jy ! Component: 300 - total flux cleaned = 0.000547605 Jy ! Component: 350 - total flux cleaned = 0.000590724 Jy ! Component: 400 - total flux cleaned = 0.000611766 Jy ! Component: 450 - total flux cleaned = 0.000673787 Jy ! Component: 500 - total flux cleaned = 0.00073431 Jy ! Component: 550 - total flux cleaned = 0.000832496 Jy ! Component: 600 - total flux cleaned = 0.000870845 Jy ! Component: 650 - total flux cleaned = 0.000945765 Jy ! Component: 700 - total flux cleaned = 0.000927222 Jy ! Component: 750 - total flux cleaned = 0.000980956 Jy ! Component: 800 - total flux cleaned = 0.000998565 Jy ! Component: 850 - total flux cleaned = 0.000981754 Jy ! Component: 900 - total flux cleaned = 0.000981307 Jy ! Component: 950 - total flux cleaned = 0.000948316 Jy ! Component: 1000 - total flux cleaned = 0.000900194 Jy ! Component: 1050 - total flux cleaned = 0.000931618 Jy ! Component: 1100 - total flux cleaned = 0.000946857 Jy ! Component: 1150 - total flux cleaned = 0.000946595 Jy ! Component: 1200 - total flux cleaned = 0.000946535 Jy ! Component: 1250 - total flux cleaned = 0.000902304 Jy ! Component: 1300 - total flux cleaned = 0.000902113 Jy ! Component: 1350 - total flux cleaned = 0.000902284 Jy ! Component: 1400 - total flux cleaned = 0.000888753 Jy ! Component: 1450 - total flux cleaned = 0.000902557 Jy ! Component: 1500 - total flux cleaned = 0.000996349 Jy ! Component: 1550 - total flux cleaned = 0.00100952 Jy ! Component: 1600 - total flux cleaned = 0.00110047 Jy ! Component: 1650 - total flux cleaned = 0.00111307 Jy ! Component: 1700 - total flux cleaned = 0.00115076 Jy ! Component: 1750 - total flux cleaned = 0.00117565 Jy ! Component: 1800 - total flux cleaned = 0.00121253 Jy ! Component: 1850 - total flux cleaned = 0.00123661 Jy ! Component: 1900 - total flux cleaned = 0.00122458 Jy ! Component: 1950 - total flux cleaned = 0.00128385 Jy ! Component: 2000 - total flux cleaned = 0.00133063 Jy ! Component: 2050 - total flux cleaned = 0.00136508 Jy ! Component: 2100 - total flux cleaned = 0.00143348 Jy ! Component: 2150 - total flux cleaned = 0.00146707 Jy ! Component: 2200 - total flux cleaned = 0.00148942 Jy ! Component: 2250 - total flux cleaned = 0.00152243 Jy ! Component: 2300 - total flux cleaned = 0.00154412 Jy ! Component: 2350 - total flux cleaned = 0.00156556 Jy ! Component: 2400 - total flux cleaned = 0.00157619 Jy ! Component: 2450 - total flux cleaned = 0.00157625 Jy ! Component: 2500 - total flux cleaned = 0.00157619 Jy ! Component: 2550 - total flux cleaned = 0.00153514 Jy ! Component: 2600 - total flux cleaned = 0.00150455 Jy ! Component: 2650 - total flux cleaned = 0.00147411 Jy ! Component: 2700 - total flux cleaned = 0.00139375 Jy ! Component: 2750 - total flux cleaned = 0.00134411 Jy ! Component: 2800 - total flux cleaned = 0.00134407 Jy ! Component: 2850 - total flux cleaned = 0.00127528 Jy ! Component: 2900 - total flux cleaned = 0.0012169 Jy ! Component: 2950 - total flux cleaned = 0.00118782 Jy ! Component: 3000 - total flux cleaned = 0.00112058 Jy ! Component: 3050 - total flux cleaned = 0.00109201 Jy ! Component: 3100 - total flux cleaned = 0.00104475 Jy ! Component: 3150 - total flux cleaned = 0.00101666 Jy ! Component: 3200 - total flux cleaned = 0.000970026 Jy ! Component: 3250 - total flux cleaned = 0.00094223 Jy ! Component: 3300 - total flux cleaned = 0.000914673 Jy ! Component: 3350 - total flux cleaned = 0.000887264 Jy ! Component: 3400 - total flux cleaned = 0.000860061 Jy ! Component: 3450 - total flux cleaned = 0.000832998 Jy ! Component: 3500 - total flux cleaned = 0.00077928 Jy ! Component: 3550 - total flux cleaned = 0.000761508 Jy ! Component: 3600 - total flux cleaned = 0.000717339 Jy ! Component: 3650 - total flux cleaned = 0.000699822 Jy ! Component: 3700 - total flux cleaned = 0.000656145 Jy ! Component: 3750 - total flux cleaned = 0.000621347 Jy ! Component: 3800 - total flux cleaned = 0.000560921 Jy ! Component: 3850 - total flux cleaned = 0.00050935 Jy ! Component: 3900 - total flux cleaned = 0.000466654 Jy ! Component: 3950 - total flux cleaned = 0.000407159 Jy ! Component: 4000 - total flux cleaned = 0.000415608 Jy ! Component: 4050 - total flux cleaned = 0.000348174 Jy ! Total flux subtracted in 4096 components = 0.000306225 Jy ! Clean residual min=-0.000580 max=0.000492 Jy/beam ! Clean residual mean=-0.000001 rms=0.000158 Jy/beam ! Combined flux in latest and established models = 0.0468706 Jy keep ! Adding 286 model components to the UV plane model. ! The established model now contains 366 components and 0.0468706 Jy ![Exited script file: muppet] wmap "J1128+1039_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.517 x 11.49 at -19.71 degrees (North through East) ! Clean map min=-0.0049966 max=0.044699 Jy/beam ! Writing clean map to FITS file: J1128+1039_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0446988 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000155282 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.04219 1.04219 2.08438 4.16877 8.33753 16.6751 33.3501 66.7003 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.044 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.517 x 11.49 at -19.71 degrees (North through East) ! Clean map min=-0.0049966 max=0.044699 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1128+1039_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:11:02 2019