! Started logfile: J1127-1857_S_2017_06_10_pus_uvs.log on Mon May 6 14:52:01 2019 obs J1127-1857_S_2017_06_10_pus_uva.fits ! Reading UV FITS file: J1127-1857_S_2017_06_10_pus_uva.fits ! AN table 1: 10 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.551111 visibilities/baseline/integration-bin. ! Found source: J1127-1857 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1154 lines of history. ! ! Reading 992 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1127-1857_S_2017_06_10_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 66 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.365339Jy sigma=0.003104 ! Fit after self-cal, rms=0.257561Jy sigma=0.002186 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.2 mas, bmaj=10.9 mas, bpa=6.596 degrees ! Estimated noise=3826.89 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.588447 Jy ! Component: 100 - total flux cleaned = 0.716766 Jy ! Total flux subtracted in 100 components = 0.716766 Jy ! Clean residual min=-0.019518 max=0.035786 Jy/beam ! Clean residual mean=-0.000000 rms=0.006306 Jy/beam ! Combined flux in latest and established models = 0.716766 Jy ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 0.716766 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103025Jy sigma=0.000832 ! Fit after self-cal, rms=0.103024Jy sigma=0.000832 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.828 mas, bmaj=12.27 mas, bpa=5.838 degrees ! Estimated noise=3014.26 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0359905 Jy ! Component: 100 - total flux cleaned = 0.0496848 Jy ! Component: 150 - total flux cleaned = 0.0565965 Jy ! Component: 200 - total flux cleaned = 0.0576444 Jy ! Total flux subtracted in 200 components = 0.0576444 Jy ! Clean residual min=-0.012964 max=0.010834 Jy/beam ! Clean residual mean=-0.000018 rms=0.003004 Jy/beam ! Combined flux in latest and established models = 0.774411 Jy ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 48 components and 0.774411 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090486Jy sigma=0.000742 ! Fit after self-cal, rms=0.090479Jy sigma=0.000742 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.96 HN 1.00 KP 1.03 ! LA 1.02 MK 1.00* NL 0.89 OV 1.04 ! PT 1.04 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 1.03 KP 1.00 ! LA 0.99 MK 1.00* NL 1.03 OV 1.07 ! PT 0.97 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 1.05 KP 0.98 ! LA 0.98 MK 1.00* NL 0.99 OV 0.98 ! PT 0.97 SC 1.00 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.08 HN 0.97 KP 1.00* ! LA 0.89 MK 1.00* NL 1.00* OV 1.00* ! PT 1.01 SC 1.00* ! ! ! Fit before self-cal, rms=0.090479Jy sigma=0.000742 ! Fit after self-cal, rms=0.080312Jy sigma=0.000664 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.835 mas, bmaj=12.26 mas, bpa=5.965 degrees ! Estimated noise=3020 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000793998 Jy ! Component: 100 - total flux cleaned = 0.000788623 Jy ! Component: 150 - total flux cleaned = 0.000784985 Jy ! Component: 200 - total flux cleaned = 0.000783648 Jy ! Total flux subtracted in 200 components = 0.000783648 Jy ! Clean residual min=-0.006949 max=0.005609 Jy/beam ! Clean residual mean=0.000013 rms=0.001664 Jy/beam ! Combined flux in latest and established models = 0.775194 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 58 components and 0.775194 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080202Jy sigma=0.000663 ! Fit after self-cal, rms=0.080195Jy sigma=0.000663 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080195Jy sigma=0.000663 ! Fit after self-cal, rms=0.080193Jy sigma=0.000663 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.835 mas, bmaj=12.26 mas, bpa=5.951 degrees ! Estimated noise=3020.57 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000666579 Jy ! Component: 100 - total flux cleaned = 0.000664781 Jy ! Component: 150 - total flux cleaned = 0.000624384 Jy ! Component: 200 - total flux cleaned = 0.000587469 Jy ! Total flux subtracted in 200 components = 0.000587469 Jy ! Clean residual min=-0.006964 max=0.005448 Jy/beam ! Clean residual mean=0.000013 rms=0.001632 Jy/beam ! Combined flux in latest and established models = 0.775782 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 63 components and 0.775782 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080140Jy sigma=0.000662 ! Fit after self-cal, rms=0.080140Jy sigma=0.000662 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.98144e-05 Jy ! Component: 100 - total flux cleaned = -7.32191e-05 Jy ! Component: 150 - total flux cleaned = -0.000102355 Jy ! Component: 200 - total flux cleaned = -0.000101707 Jy ! Total flux subtracted in 200 components = -0.000101707 Jy ! Clean residual min=-0.006994 max=0.005521 Jy/beam ! Clean residual mean=0.000013 rms=0.001623 Jy/beam ! Combined flux in latest and established models = 0.77568 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 71 components and 0.77568 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080117Jy sigma=0.000662 ! Fit after self-cal, rms=0.080118Jy sigma=0.000662 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080118Jy sigma=0.000662 ! Fit after self-cal, rms=0.080089Jy sigma=0.000662 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.835 mas, bmaj=12.25 mas, bpa=5.945 degrees ! Estimated noise=3019.89 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000391467 Jy ! Component: 100 - total flux cleaned = 0.000451555 Jy ! Component: 150 - total flux cleaned = 0.00042364 Jy ! Component: 200 - total flux cleaned = 0.000423597 Jy ! Total flux subtracted in 200 components = 0.000423597 Jy ! Clean residual min=-0.006998 max=0.005408 Jy/beam ! Clean residual mean=0.000014 rms=0.001608 Jy/beam ! Combined flux in latest and established models = 0.776104 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 78 components and 0.776104 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080068Jy sigma=0.000662 ! Fit after self-cal, rms=0.080069Jy sigma=0.000662 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.47721e-06 Jy ! Component: 100 - total flux cleaned = -4.20436e-06 Jy ! Component: 150 - total flux cleaned = -2.67749e-05 Jy ! Component: 200 - total flux cleaned = -2.6624e-05 Jy ! Total flux subtracted in 200 components = -2.6624e-05 Jy ! Clean residual min=-0.007004 max=0.005439 Jy/beam ! Clean residual mean=0.000014 rms=0.001604 Jy/beam ! Combined flux in latest and established models = 0.776077 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 83 components and 0.776077 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080057Jy sigma=0.000662 ! Fit after self-cal, rms=0.080058Jy sigma=0.000662 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080058Jy sigma=0.000662 ! Fit after self-cal, rms=0.080038Jy sigma=0.000662 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.462 mas, bmaj=17.97 mas, bpa=-6.05 degrees ! Estimated noise=3694.94 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000305385 Jy ! Component: 100 - total flux cleaned = -0.000304301 Jy ! Component: 150 - total flux cleaned = -0.000282385 Jy ! Component: 200 - total flux cleaned = -0.000263652 Jy ! Total flux subtracted in 200 components = -0.000263652 Jy ! Clean residual min=-0.006681 max=0.005931 Jy/beam ! Clean residual mean=0.000027 rms=0.002050 Jy/beam ! Combined flux in latest and established models = 0.775813 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 87 components and 0.775813 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080037Jy sigma=0.000662 ! Fit after self-cal, rms=0.080035Jy sigma=0.000662 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.86464e-05 Jy ! Component: 100 - total flux cleaned = -4.95606e-05 Jy ! Component: 150 - total flux cleaned = -3.21348e-05 Jy ! Component: 200 - total flux cleaned = -2.84412e-06 Jy ! Total flux subtracted in 200 components = -2.84412e-06 Jy ! Clean residual min=-0.006662 max=0.005943 Jy/beam ! Clean residual mean=0.000027 rms=0.002047 Jy/beam ! Combined flux in latest and established models = 0.77581 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 93 components and 0.77581 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080038Jy sigma=0.000662 ! Fit after self-cal, rms=0.080038Jy sigma=0.000662 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.835 mas, bmaj=12.25 mas, bpa=5.94 degrees ! Estimated noise=3019.3 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.835 x 12.25 at 5.94 degrees (North through East) ! Clean map min=-0.0068346 max=0.75453 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080038Jy sigma=0.000662 ! Fit after self-cal, rms=0.071593Jy sigma=0.000588 ! Inverting map and beam ! Estimated beam: bmin=3.835 mas, bmaj=12.25 mas, bpa=5.931 degrees ! Estimated noise=3020.4 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000473302 Jy ! Component: 100 - total flux cleaned = 0.00058634 Jy ! Component: 150 - total flux cleaned = 0.000560865 Jy ! Component: 200 - total flux cleaned = 0.000538516 Jy ! Total flux subtracted in 200 components = 0.000538516 Jy ! Clean residual min=-0.006843 max=0.005332 Jy/beam ! Clean residual mean=0.000014 rms=0.001542 Jy/beam ! Combined flux in latest and established models = 0.776349 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 103 components and 0.776349 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071568Jy sigma=0.000588 ! Fit after self-cal, rms=0.071571Jy sigma=0.000588 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.4072e-05 Jy ! Component: 100 - total flux cleaned = 5.52202e-06 Jy ! Component: 150 - total flux cleaned = 5.32874e-06 Jy ! Component: 200 - total flux cleaned = -1.21962e-05 Jy ! Total flux subtracted in 200 components = -1.21962e-05 Jy ! Clean residual min=-0.006836 max=0.005244 Jy/beam ! Clean residual mean=0.000014 rms=0.001539 Jy/beam ! Combined flux in latest and established models = 0.776337 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 109 components and 0.776337 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071560Jy sigma=0.000588 ! Fit after self-cal, rms=0.071562Jy sigma=0.000588 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071562Jy sigma=0.000588 ! Fit after self-cal, rms=0.071546Jy sigma=0.000588 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.217 mas, bmaj=10.9 mas, bpa=6.579 degrees ! Estimated noise=3827.77 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.586432 Jy ! Component: 100 - total flux cleaned = 0.714349 Jy ! Component: 150 - total flux cleaned = 0.745833 Jy ! Component: 200 - total flux cleaned = 0.758123 Jy ! Total flux subtracted in 200 components = 0.758123 Jy ! Clean residual min=-0.007821 max=0.007615 Jy/beam ! Clean residual mean=0.000005 rms=0.002208 Jy/beam ! Combined flux in latest and established models = 0.758123 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.758123 Jy ! Inverting map and beam ! Estimated beam: bmin=3.835 mas, bmaj=12.25 mas, bpa=5.93 degrees ! Estimated noise=3019.88 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00930719 Jy ! Component: 100 - total flux cleaned = 0.0143162 Jy ! Component: 150 - total flux cleaned = 0.0170739 Jy ! Component: 200 - total flux cleaned = 0.0186021 Jy ! Total flux subtracted in 200 components = 0.0186021 Jy ! Clean residual min=-0.006814 max=0.005375 Jy/beam ! Clean residual mean=0.000013 rms=0.001565 Jy/beam ! Combined flux in latest and established models = 0.776725 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 63 components and 0.776725 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.46 mas, bmaj=17.98 mas, bpa=-6.069 degrees ! Estimated noise=3695.77 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.74526e-05 Jy ! Component: 100 - total flux cleaned = 1.29341e-05 Jy ! Component: 150 - total flux cleaned = 1.42466e-05 Jy ! Component: 200 - total flux cleaned = 4.23033e-05 Jy ! Total flux subtracted in 200 components = 4.23033e-05 Jy ! Clean residual min=-0.006606 max=0.006003 Jy/beam ! Clean residual mean=0.000025 rms=0.001964 Jy/beam ! Combined flux in latest and established models = 0.776768 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.70663e-06 Jy ! Component: 100 - total flux cleaned = -1.30533e-05 Jy ! Component: 150 - total flux cleaned = -1.28219e-05 Jy ! Component: 200 - total flux cleaned = -2.3046e-05 Jy ! Total flux subtracted in 200 components = -2.3046e-05 Jy ! Clean residual min=-0.006594 max=0.005984 Jy/beam ! Clean residual mean=0.000025 rms=0.001963 Jy/beam ! Combined flux in latest and established models = 0.776745 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 74 components and 0.776745 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.835 mas, bmaj=12.25 mas, bpa=5.93 degrees ! Estimated noise=3019.88 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.44286e-06 Jy ! Component: 100 - total flux cleaned = 0.000270813 Jy ! Component: 150 - total flux cleaned = 0.000333208 Jy ! Component: 200 - total flux cleaned = 0.000334001 Jy ! Total flux subtracted in 200 components = 0.000334001 Jy ! Clean residual min=-0.006819 max=0.005367 Jy/beam ! Clean residual mean=0.000013 rms=0.001550 Jy/beam ! Combined flux in latest and established models = 0.777079 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 88 components and 0.777079 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071598Jy sigma=0.000589 ! Fit after self-cal, rms=0.071595Jy sigma=0.000588 wmodel J1127-1857_S_2017_06_10_pus_map.mod ! Writing 88 model components to file: J1127-1857_S_2017_06_10_pus_map.mod wobs J1127-1857_S_2017_06_10_pus_uvs.fits ! Writing UV FITS file: J1127-1857_S_2017_06_10_pus_uvs.fits wwins J1127-1857_S_2017_06_10_pus_map.win ! wwins: Wrote 1 windows to J1127-1857_S_2017_06_10_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00167833 Jy ! Component: 100 - total flux cleaned = -0.00104722 Jy ! Component: 150 - total flux cleaned = -0.00055319 Jy ! Component: 200 - total flux cleaned = -0.00039552 Jy ! Component: 250 - total flux cleaned = 4.14027e-05 Jy ! Component: 300 - total flux cleaned = 0.0003867 Jy ! Component: 350 - total flux cleaned = 0.000387148 Jy ! Component: 400 - total flux cleaned = 0.00051311 Jy ! Component: 450 - total flux cleaned = 0.000572924 Jy ! Component: 500 - total flux cleaned = 0.000629119 Jy ! Component: 550 - total flux cleaned = 0.000738616 Jy ! Component: 600 - total flux cleaned = 0.000844806 Jy ! Component: 650 - total flux cleaned = 0.000998154 Jy ! Component: 700 - total flux cleaned = 0.00114543 Jy ! Component: 750 - total flux cleaned = 0.00114606 Jy ! Component: 800 - total flux cleaned = 0.00119388 Jy ! Component: 850 - total flux cleaned = 0.00128472 Jy ! Component: 900 - total flux cleaned = 0.00141665 Jy ! Component: 950 - total flux cleaned = 0.00154504 Jy ! Component: 1000 - total flux cleaned = 0.00158648 Jy ! Component: 1050 - total flux cleaned = 0.00162605 Jy ! Component: 1100 - total flux cleaned = 0.00166531 Jy ! Component: 1150 - total flux cleaned = 0.00174196 Jy ! Component: 1200 - total flux cleaned = 0.00181694 Jy ! Component: 1250 - total flux cleaned = 0.00174227 Jy ! Component: 1300 - total flux cleaned = 0.00170588 Jy ! Component: 1350 - total flux cleaned = 0.0016704 Jy ! Component: 1400 - total flux cleaned = 0.00163522 Jy ! Component: 1450 - total flux cleaned = 0.00153136 Jy ! Component: 1500 - total flux cleaned = 0.00142959 Jy ! Component: 1550 - total flux cleaned = 0.00146289 Jy ! Component: 1600 - total flux cleaned = 0.00136318 Jy ! Component: 1650 - total flux cleaned = 0.0013628 Jy ! Component: 1700 - total flux cleaned = 0.00133046 Jy ! Component: 1750 - total flux cleaned = 0.0013619 Jy ! Component: 1800 - total flux cleaned = 0.00133012 Jy ! Component: 1850 - total flux cleaned = 0.00129911 Jy ! Component: 1900 - total flux cleaned = 0.00126831 Jy ! Component: 1950 - total flux cleaned = 0.00123822 Jy ! Component: 2000 - total flux cleaned = 0.00123843 Jy ! Component: 2050 - total flux cleaned = 0.00111943 Jy ! Component: 2100 - total flux cleaned = 0.00100198 Jy ! Component: 2150 - total flux cleaned = 0.000914443 Jy ! Component: 2200 - total flux cleaned = 0.000885596 Jy ! Component: 2250 - total flux cleaned = 0.000827935 Jy ! Component: 2300 - total flux cleaned = 0.000828084 Jy ! Component: 2350 - total flux cleaned = 0.000799734 Jy ! Component: 2400 - total flux cleaned = 0.000799838 Jy ! Component: 2450 - total flux cleaned = 0.000856033 Jy ! Component: 2500 - total flux cleaned = 0.000744147 Jy ! Component: 2550 - total flux cleaned = 0.000688386 Jy ! Component: 2600 - total flux cleaned = 0.000660546 Jy ! Component: 2650 - total flux cleaned = 0.000660566 Jy ! Component: 2700 - total flux cleaned = 0.000632818 Jy ! Component: 2750 - total flux cleaned = 0.000550058 Jy ! Component: 2800 - total flux cleaned = 0.000522542 Jy ! Component: 2850 - total flux cleaned = 0.00054998 Jy ! Component: 2900 - total flux cleaned = 0.00052251 Jy ! Component: 2950 - total flux cleaned = 0.000522544 Jy ! Component: 3000 - total flux cleaned = 0.000550301 Jy ! Component: 3050 - total flux cleaned = 0.000522819 Jy ! Component: 3100 - total flux cleaned = 0.000550714 Jy ! Component: 3150 - total flux cleaned = 0.000578657 Jy ! Component: 3200 - total flux cleaned = 0.000550801 Jy ! Component: 3250 - total flux cleaned = 0.000578859 Jy ! Component: 3300 - total flux cleaned = 0.000606817 Jy ! Component: 3350 - total flux cleaned = 0.000607092 Jy ! Component: 3400 - total flux cleaned = 0.000635434 Jy ! Component: 3450 - total flux cleaned = 0.000578387 Jy ! Component: 3500 - total flux cleaned = 0.000607098 Jy ! Component: 3550 - total flux cleaned = 0.000607045 Jy ! Component: 3600 - total flux cleaned = 0.000636026 Jy ! Component: 3650 - total flux cleaned = 0.000606909 Jy ! Component: 3700 - total flux cleaned = 0.000606677 Jy ! Component: 3750 - total flux cleaned = 0.00060677 Jy ! Component: 3800 - total flux cleaned = 0.000606759 Jy ! Component: 3850 - total flux cleaned = 0.000606546 Jy ! Component: 3900 - total flux cleaned = 0.000636594 Jy ! Component: 3950 - total flux cleaned = 0.000666559 Jy ! Component: 4000 - total flux cleaned = 0.000636705 Jy ! Component: 4050 - total flux cleaned = 0.000606357 Jy ! Total flux subtracted in 4096 components = 0.000667502 Jy ! Clean residual min=-0.002039 max=0.002320 Jy/beam ! Clean residual mean=0.000012 rms=0.000487 Jy/beam ! Combined flux in latest and established models = 0.777746 Jy keep ! Adding 217 model components to the UV plane model. ! The established model now contains 305 components and 0.777746 Jy ![Exited script file: muppet] wmap "J1127-1857_S_2017_06_10_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.835 x 12.25 at 5.93 degrees (North through East) ! Clean map min=-0.0051431 max=0.75492 Jy/beam ! Writing clean map to FITS file: J1127-1857_S_2017_06_10_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.754921 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000467305 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.185704 0.185704 0.371407 0.742814 1.48563 2.97126 5.94251 11.885 23.7701 47.5401 95.0802 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.754 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.835 x 12.25 at 5.93 degrees (North through East) ! Clean map min=-0.0051431 max=0.75492 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1127-1857_S_2017_06_10_pus_uvs.log closed on Mon May 6 14:52:06 2019