! Started logfile: J1125-3557_S_2017_08_12_pus_uvs.log on Fri May 10 14:58:47 2019 obs J1125-3557_S_2017_08_12_pus_uva.fits ! Reading UV FITS file: J1125-3557_S_2017_08_12_pus_uva.fits ! AN table 1: 116 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.696169 visibilities/baseline/integration-bin. ! Found source: J1125-3557 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 14536 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1125-3557_S_2017_08_12_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 359 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 359 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 185 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 833 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.973755Jy sigma=0.006159 ! Fit after self-cal, rms=0.929268Jy sigma=0.005904 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.292 mas, bmaj=6.416 mas, bpa=-3.67 degrees ! Estimated noise=1988.84 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0568119 Jy ! Component: 100 - total flux cleaned = 0.0694732 Jy ! Total flux subtracted in 100 components = 0.0694732 Jy ! Clean residual min=-0.005183 max=0.005968 Jy/beam ! Clean residual mean=-0.000020 rms=0.001361 Jy/beam ! Combined flux in latest and established models = 0.0694732 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.0694732 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105208Jy sigma=0.000644 ! Fit after self-cal, rms=0.104671Jy sigma=0.000641 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.875 mas, bmaj=7.373 mas, bpa=-3.786 degrees ! Estimated noise=1201.64 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0075366 Jy ! Component: 100 - total flux cleaned = 0.0107887 Jy ! Component: 150 - total flux cleaned = 0.0123399 Jy ! Component: 200 - total flux cleaned = 0.0127323 Jy ! Total flux subtracted in 200 components = 0.0127323 Jy ! Clean residual min=-0.003915 max=0.003449 Jy/beam ! Clean residual mean=-0.000004 rms=0.000840 Jy/beam ! Combined flux in latest and established models = 0.0822055 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 21 components and 0.0822055 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104205Jy sigma=0.000638 ! Fit after self-cal, rms=0.104171Jy sigma=0.000638 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.91 HN 1.00* KP 1.04 ! LA 0.95 MK 1.02 NL 1.00* OV 1.05 ! PT 0.99 SC 1.05 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 1.00* KP 1.01 ! LA 0.98 MK 1.03 NL 1.00* OV 1.01 ! PT 0.97 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.27 FD 1.02 HN 1.00* KP 1.02 ! LA 0.98 MK 1.07 NL 0.99 OV 0.96 ! PT 0.98 SC 0.97 ! ! ! Correcting IF 4. ! A total of 327 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.104171Jy sigma=0.000638 ! Fit after self-cal, rms=0.107547Jy sigma=0.000641 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.919 mas, bmaj=7.497 mas, bpa=-2.408 degrees ! Estimated noise=1238.14 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000199695 Jy ! Component: 100 - total flux cleaned = -0.000264904 Jy ! Component: 150 - total flux cleaned = -0.000295602 Jy ! Component: 200 - total flux cleaned = -0.0002717 Jy ! Total flux subtracted in 200 components = -0.0002717 Jy ! Clean residual min=-0.003776 max=0.002765 Jy/beam ! Clean residual mean=0.000013 rms=0.000731 Jy/beam ! Combined flux in latest and established models = 0.0819338 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 27 components and 0.0819338 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107529Jy sigma=0.000641 ! Fit after self-cal, rms=0.107578Jy sigma=0.000641 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107578Jy sigma=0.000641 ! Fit after self-cal, rms=0.108088Jy sigma=0.000640 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.93 mas, bmaj=7.48 mas, bpa=-2.377 degrees ! Estimated noise=1238.02 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.01096e-05 Jy ! Component: 100 - total flux cleaned = -1.0763e-05 Jy ! Component: 150 - total flux cleaned = 4.65219e-06 Jy ! Component: 200 - total flux cleaned = 3.93191e-06 Jy ! Total flux subtracted in 200 components = 3.93191e-06 Jy ! Clean residual min=-0.003397 max=0.002645 Jy/beam ! Clean residual mean=0.000006 rms=0.000699 Jy/beam ! Combined flux in latest and established models = 0.0819377 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 32 components and 0.0819377 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108081Jy sigma=0.000640 ! Fit after self-cal, rms=0.108114Jy sigma=0.000640 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.67345e-05 Jy ! Component: 100 - total flux cleaned = 5.80922e-05 Jy ! Component: 150 - total flux cleaned = 2.69189e-05 Jy ! Component: 200 - total flux cleaned = 4.08759e-05 Jy ! Total flux subtracted in 200 components = 4.08759e-05 Jy ! Clean residual min=-0.003419 max=0.002611 Jy/beam ! Clean residual mean=0.000007 rms=0.000698 Jy/beam ! Combined flux in latest and established models = 0.0819786 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 32 components and 0.0819786 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108108Jy sigma=0.000640 ! Fit after self-cal, rms=0.108108Jy sigma=0.000640 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108108Jy sigma=0.000640 ! Fit after self-cal, rms=0.108399Jy sigma=0.000640 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.933 mas, bmaj=7.47 mas, bpa=-2.389 degrees ! Estimated noise=1237.1 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.41221e-05 Jy ! Component: 100 - total flux cleaned = -8.53855e-05 Jy ! Component: 150 - total flux cleaned = -9.78472e-05 Jy ! Component: 200 - total flux cleaned = -9.80124e-05 Jy ! Total flux subtracted in 200 components = -9.80124e-05 Jy ! Clean residual min=-0.003235 max=0.002793 Jy/beam ! Clean residual mean=0.000002 rms=0.000693 Jy/beam ! Combined flux in latest and established models = 0.0818806 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 35 components and 0.0818806 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108395Jy sigma=0.000640 ! Fit after self-cal, rms=0.108408Jy sigma=0.000640 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.76619e-06 Jy ! Component: 100 - total flux cleaned = -8.91589e-06 Jy ! Component: 150 - total flux cleaned = -1.97577e-05 Jy ! Component: 200 - total flux cleaned = -2.05047e-05 Jy ! Total flux subtracted in 200 components = -2.05047e-05 Jy ! Clean residual min=-0.003246 max=0.002771 Jy/beam ! Clean residual mean=0.000002 rms=0.000692 Jy/beam ! Combined flux in latest and established models = 0.0818601 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 35 components and 0.0818601 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108405Jy sigma=0.000640 ! Fit after self-cal, rms=0.108404Jy sigma=0.000640 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108404Jy sigma=0.000640 ! Fit after self-cal, rms=0.108434Jy sigma=0.000640 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.438 mas, bmaj=25.73 mas, bpa=0.3358 degrees ! Estimated noise=1614.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.44281e-06 Jy ! Component: 100 - total flux cleaned = -4.82746e-06 Jy ! Component: 150 - total flux cleaned = -5.17616e-06 Jy ! Component: 200 - total flux cleaned = -5.2112e-06 Jy ! Total flux subtracted in 200 components = -5.2112e-06 Jy ! Clean residual min=-0.002938 max=0.002766 Jy/beam ! Clean residual mean=0.000002 rms=0.000921 Jy/beam ! Combined flux in latest and established models = 0.0818549 Jy selfcal ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 35 components and 0.0818549 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108434Jy sigma=0.000640 ! Fit after self-cal, rms=0.108439Jy sigma=0.000640 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.89297e-05 Jy ! Component: 100 - total flux cleaned = 1.80896e-05 Jy ! Component: 150 - total flux cleaned = 1.80172e-05 Jy ! Component: 200 - total flux cleaned = 1.83721e-05 Jy ! Total flux subtracted in 200 components = 1.83721e-05 Jy ! Clean residual min=-0.002936 max=0.002772 Jy/beam ! Clean residual mean=0.000003 rms=0.000922 Jy/beam ! Combined flux in latest and established models = 0.0818732 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 36 components and 0.0818732 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108439Jy sigma=0.000640 ! Fit after self-cal, rms=0.108439Jy sigma=0.000640 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.934 mas, bmaj=7.474 mas, bpa=-2.411 degrees ! Estimated noise=1236.46 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.934 x 7.474 at -2.411 degrees (North through East) ! Clean map min=-0.0030426 max=0.07552 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.324 mas, bmaj=6.429 mas, bpa=-2.928 degrees ! Estimated noise=2079.01 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0579271 Jy ! Component: 100 - total flux cleaned = 0.0713468 Jy ! Component: 150 - total flux cleaned = 0.0763722 Jy ! Component: 200 - total flux cleaned = 0.0784993 Jy ! Total flux subtracted in 200 components = 0.0784993 Jy ! Clean residual min=-0.005052 max=0.004853 Jy/beam ! Clean residual mean=-0.000004 rms=0.001225 Jy/beam ! Combined flux in latest and established models = 0.0784993 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.0784993 Jy ! Inverting map and beam ! Estimated beam: bmin=2.934 mas, bmaj=7.474 mas, bpa=-2.411 degrees ! Estimated noise=1236.46 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.5, -13). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00341794 Jy ! Component: 100 - total flux cleaned = 0.00350495 Jy ! Component: 150 - total flux cleaned = 0.00357184 Jy ! Component: 200 - total flux cleaned = 0.0036647 Jy ! Total flux subtracted in 200 components = 0.0036647 Jy ! Clean residual min=-0.002846 max=0.002828 Jy/beam ! Clean residual mean=0.000003 rms=0.000697 Jy/beam ! Combined flux in latest and established models = 0.082164 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 32 components and 0.082164 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.438 mas, bmaj=25.73 mas, bpa=0.3358 degrees ! Estimated noise=1614.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000193508 Jy ! Component: 100 - total flux cleaned = 0.00019853 Jy ! Component: 150 - total flux cleaned = 0.000233193 Jy ! Component: 200 - total flux cleaned = 0.000263202 Jy ! Total flux subtracted in 200 components = 0.000263202 Jy ! Clean residual min=-0.003173 max=0.002983 Jy/beam ! Clean residual mean=0.000008 rms=0.000923 Jy/beam ! Combined flux in latest and established models = 0.0824272 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.27086e-07 Jy ! Component: 100 - total flux cleaned = -1.07303e-06 Jy ! Component: 150 - total flux cleaned = -1.30294e-06 Jy ! Component: 200 - total flux cleaned = -1.29888e-05 Jy ! Total flux subtracted in 200 components = -1.29888e-05 Jy ! Clean residual min=-0.003162 max=0.002947 Jy/beam ! Clean residual mean=0.000008 rms=0.000922 Jy/beam ! Combined flux in latest and established models = 0.0824142 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 42 components and 0.0824142 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.934 mas, bmaj=7.474 mas, bpa=-2.411 degrees ! Estimated noise=1236.46 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000180595 Jy ! Component: 100 - total flux cleaned = -0.00021683 Jy ! Component: 150 - total flux cleaned = -0.000152717 Jy ! Component: 200 - total flux cleaned = -0.000152566 Jy ! Total flux subtracted in 200 components = -0.000152566 Jy ! Clean residual min=-0.002843 max=0.002730 Jy/beam ! Clean residual mean=0.000004 rms=0.000684 Jy/beam ! Combined flux in latest and established models = 0.0822616 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 56 components and 0.0822616 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108442Jy sigma=0.000640 ! Fit after self-cal, rms=0.108439Jy sigma=0.000640 wmodel J1125-3557_S_2017_08_12_pus_map.mod ! Writing 56 model components to file: J1125-3557_S_2017_08_12_pus_map.mod wobs J1125-3557_S_2017_08_12_pus_uvs.fits ! Writing UV FITS file: J1125-3557_S_2017_08_12_pus_uvs.fits wwins J1125-3557_S_2017_08_12_pus_map.win ! wwins: Wrote 2 windows to J1125-3557_S_2017_08_12_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000490544 Jy ! Component: 100 - total flux cleaned = -0.000856808 Jy ! Component: 150 - total flux cleaned = -0.00102862 Jy ! Component: 200 - total flux cleaned = -0.00110986 Jy ! Component: 250 - total flux cleaned = -0.00122353 Jy ! Component: 300 - total flux cleaned = -0.00136833 Jy ! Component: 350 - total flux cleaned = -0.00143804 Jy ! Component: 400 - total flux cleaned = -0.00150506 Jy ! Component: 450 - total flux cleaned = -0.00150464 Jy ! Component: 500 - total flux cleaned = -0.00147338 Jy ! Component: 550 - total flux cleaned = -0.00150409 Jy ! Component: 600 - total flux cleaned = -0.00165319 Jy ! Component: 650 - total flux cleaned = -0.00179691 Jy ! Component: 700 - total flux cleaned = -0.00179575 Jy ! Component: 750 - total flux cleaned = -0.00182363 Jy ! Component: 800 - total flux cleaned = -0.00187782 Jy ! Component: 850 - total flux cleaned = -0.00195718 Jy ! Component: 900 - total flux cleaned = -0.00198276 Jy ! Component: 950 - total flux cleaned = -0.0021076 Jy ! Component: 1000 - total flux cleaned = -0.00213245 Jy ! Component: 1050 - total flux cleaned = -0.00225227 Jy ! Component: 1100 - total flux cleaned = -0.00236906 Jy ! Component: 1150 - total flux cleaned = -0.00239206 Jy ! Component: 1200 - total flux cleaned = -0.00250421 Jy ! Component: 1250 - total flux cleaned = -0.00259238 Jy ! Component: 1300 - total flux cleaned = -0.00274371 Jy ! Component: 1350 - total flux cleaned = -0.00270111 Jy ! Component: 1400 - total flux cleaned = -0.0027433 Jy ! Component: 1450 - total flux cleaned = -0.00274308 Jy ! Component: 1500 - total flux cleaned = -0.00280351 Jy ! Component: 1550 - total flux cleaned = -0.00278309 Jy ! Component: 1600 - total flux cleaned = -0.00276302 Jy ! Component: 1650 - total flux cleaned = -0.00278199 Jy ! Component: 1700 - total flux cleaned = -0.00272481 Jy ! Component: 1750 - total flux cleaned = -0.0027435 Jy ! Component: 1800 - total flux cleaned = -0.00279919 Jy ! Component: 1850 - total flux cleaned = -0.00279946 Jy ! Component: 1900 - total flux cleaned = -0.00285391 Jy ! Component: 1950 - total flux cleaned = -0.00290736 Jy ! Component: 2000 - total flux cleaned = -0.00296002 Jy ! Component: 2050 - total flux cleaned = -0.00301222 Jy ! Component: 2100 - total flux cleaned = -0.00308101 Jy ! Component: 2150 - total flux cleaned = -0.00313201 Jy ! Component: 2200 - total flux cleaned = -0.00321609 Jy ! Component: 2250 - total flux cleaned = -0.00336557 Jy ! Component: 2300 - total flux cleaned = -0.00349688 Jy ! Component: 2350 - total flux cleaned = -0.00361056 Jy ! Component: 2400 - total flux cleaned = -0.00370717 Jy ! Component: 2450 - total flux cleaned = -0.00385062 Jy ! Component: 2500 - total flux cleaned = -0.00394534 Jy ! Component: 2550 - total flux cleaned = -0.00403919 Jy ! Component: 2600 - total flux cleaned = -0.00416302 Jy ! Component: 2650 - total flux cleaned = -0.00423985 Jy ! Component: 2700 - total flux cleaned = -0.00437687 Jy ! Component: 2750 - total flux cleaned = -0.00443714 Jy ! Component: 2800 - total flux cleaned = -0.00446696 Jy ! Component: 2850 - total flux cleaned = -0.00451146 Jy ! Component: 2900 - total flux cleaned = -0.0046292 Jy ! Component: 2950 - total flux cleaned = -0.00471684 Jy ! Component: 3000 - total flux cleaned = -0.00480365 Jy ! Component: 3050 - total flux cleaned = -0.00488989 Jy ! Component: 3100 - total flux cleaned = -0.00498989 Jy ! Component: 3150 - total flux cleaned = -0.00507491 Jy ! Component: 3200 - total flux cleaned = -0.00513142 Jy ! Component: 3250 - total flux cleaned = -0.00524345 Jy ! Component: 3300 - total flux cleaned = -0.00534092 Jy ! Component: 3350 - total flux cleaned = -0.00542396 Jy ! Component: 3400 - total flux cleaned = -0.00552018 Jy ! Component: 3450 - total flux cleaned = -0.00562939 Jy ! Component: 3500 - total flux cleaned = -0.00567011 Jy ! Component: 3550 - total flux cleaned = -0.00577817 Jy ! Component: 3600 - total flux cleaned = -0.00585866 Jy ! Component: 3650 - total flux cleaned = -0.00593894 Jy ! Component: 3700 - total flux cleaned = -0.00603206 Jy ! Component: 3750 - total flux cleaned = -0.00613806 Jy ! Component: 3800 - total flux cleaned = -0.00623045 Jy ! Component: 3850 - total flux cleaned = -0.0063354 Jy ! Component: 3900 - total flux cleaned = -0.00642682 Jy ! Component: 3950 - total flux cleaned = -0.00654383 Jy ! Component: 4000 - total flux cleaned = -0.00658268 Jy ! Component: 4050 - total flux cleaned = -0.00671167 Jy ! Total flux subtracted in 4096 components = -0.00676304 Jy ! Clean residual min=-0.000778 max=0.000802 Jy/beam ! Clean residual mean=0.000004 rms=0.000219 Jy/beam ! Combined flux in latest and established models = 0.0754986 Jy keep ! Adding 258 model components to the UV plane model. ! The established model now contains 314 components and 0.0754986 Jy ![Exited script file: muppet] wmap "J1125-3557_S_2017_08_12_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.934 x 7.474 at -2.411 degrees (North through East) ! Clean map min=-0.0017513 max=0.074185 Jy/beam ! Writing clean map to FITS file: J1125-3557_S_2017_08_12_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.074185 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000212113 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.857774 0.857774 1.71555 3.4311 6.86219 13.7244 27.4488 54.8975 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.074 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.934 x 7.474 at -2.411 degrees (North through East) ! Clean map min=-0.0017513 max=0.074185 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1125-3557_S_2017_08_12_pus_uvs.log closed on Fri May 10 14:58:51 2019