! Started logfile: J1125+2610_S_2017_04_28_pus_uvs.log on Thu May 2 16:23:45 2019 obs J1125+2610_S_2017_04_28_pus_uva.fits ! Reading UV FITS file: J1125+2610_S_2017_04_28_pus_uva.fits ! AN table 1: 23 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.744928 visibilities/baseline/integration-bin. ! Found source: J1125+2610 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 671 lines of history. ! ! Reading 3084 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1125+2610_S_2017_04_28_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 124 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.208760Jy sigma=0.027090 ! Fit after self-cal, rms=0.201972Jy sigma=0.026355 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.28 mas, bmaj=6.945 mas, bpa=0.1932 degrees ! Estimated noise=1508.82 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.568354 Jy ! Component: 100 - total flux cleaned = 0.71093 Jy ! Total flux subtracted in 100 components = 0.71093 Jy ! Clean residual min=-0.134115 max=0.150789 Jy/beam ! Clean residual mean=0.000055 rms=0.055070 Jy/beam ! Combined flux in latest and established models = 0.71093 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.71093 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.300468Jy sigma=0.017366 ! Fit after self-cal, rms=0.300481Jy sigma=0.017366 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.994 mas, bmaj=7.902 mas, bpa=3.714 degrees ! Estimated noise=1224.66 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.05688 Jy ! Component: 100 - total flux cleaned = 0.0657784 Jy ! Component: 150 - total flux cleaned = 0.0711158 Jy ! Component: 200 - total flux cleaned = 0.0722241 Jy ! Total flux subtracted in 200 components = 0.0722241 Jy ! Clean residual min=-0.151184 max=0.159861 Jy/beam ! Clean residual mean=0.000294 rms=0.055300 Jy/beam ! Combined flux in latest and established models = 0.783154 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 11 components and 0.783154 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.263115Jy sigma=0.017926 ! Fit after self-cal, rms=0.263031Jy sigma=0.017926 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.75 FD 0.84 HN 0.97 KP 0.86 ! LA 0.84 MK 1.10 NL 0.87 OV 0.88 ! PT 0.92 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.79 FD 0.77 HN 1.02 KP 0.83 ! LA 0.81 MK 1.05 NL 1.03 OV 0.92 ! PT 0.90 SC 1.07 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.80 FD 0.80 HN 1.01 KP 0.87 ! LA 0.86 MK 1.09 NL 0.98 OV 0.83 ! PT 0.89 SC 1.05 ! ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.86 FD 0.85 HN 1.02 KP 1.00* ! LA 32.13 MK 1.23 NL 1.00* OV 1.00* ! PT 0.91 SC 1.00* ! ! ! Fit before self-cal, rms=0.263031Jy sigma=0.017926 ! Fit after self-cal, rms=4.865049Jy sigma=0.001689 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.881 mas, bmaj=7.885 mas, bpa=4.272 degrees ! Estimated noise=1250.97 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0136182 Jy ! Component: 100 - total flux cleaned = 0.0155997 Jy ! Component: 150 - total flux cleaned = 0.0186923 Jy ! Component: 200 - total flux cleaned = 0.0231598 Jy ! Total flux subtracted in 200 components = 0.0231598 Jy ! Clean residual min=-0.022170 max=0.017623 Jy/beam ! Clean residual mean=0.000036 rms=0.005112 Jy/beam ! Combined flux in latest and established models = 0.806314 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 31 components and 0.806313 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=4.862124Jy sigma=0.001603 ! Fit after self-cal, rms=4.862205Jy sigma=0.001597 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=4.862205Jy sigma=0.001597 ! Fit after self-cal, rms=2.415340Jy sigma=0.001264 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.852 mas, bmaj=7.91 mas, bpa=4.018 degrees ! Estimated noise=1256.06 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0103713 Jy ! Component: 100 - total flux cleaned = 0.0128774 Jy ! Component: 150 - total flux cleaned = 0.0141327 Jy ! Component: 200 - total flux cleaned = 0.0152449 Jy ! Total flux subtracted in 200 components = 0.0152449 Jy ! Clean residual min=-0.014529 max=0.012680 Jy/beam ! Clean residual mean=0.000058 rms=0.003507 Jy/beam ! Combined flux in latest and established models = 0.821558 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 44 components and 0.821558 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.414362Jy sigma=0.001231 ! Fit after self-cal, rms=2.414345Jy sigma=0.001228 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00146016 Jy ! Component: 100 - total flux cleaned = 0.00264149 Jy ! Component: 150 - total flux cleaned = 0.00316847 Jy ! Component: 200 - total flux cleaned = 0.00389053 Jy ! Total flux subtracted in 200 components = 0.00389053 Jy ! Clean residual min=-0.013181 max=0.011667 Jy/beam ! Clean residual mean=0.000057 rms=0.003398 Jy/beam ! Combined flux in latest and established models = 0.825449 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 52 components and 0.825449 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.413960Jy sigma=0.001219 ! Fit after self-cal, rms=2.413951Jy sigma=0.001218 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.413951Jy sigma=0.001218 ! Fit after self-cal, rms=0.073212Jy sigma=0.000744 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.829 mas, bmaj=7.907 mas, bpa=3.69 degrees ! Estimated noise=1254.22 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00302835 Jy ! Component: 100 - total flux cleaned = -0.00335677 Jy ! Component: 150 - total flux cleaned = -0.00356505 Jy ! Component: 200 - total flux cleaned = -0.00375876 Jy ! Total flux subtracted in 200 components = -0.00375876 Jy ! Clean residual min=-0.006407 max=0.006873 Jy/beam ! Clean residual mean=-0.000009 rms=0.001462 Jy/beam ! Combined flux in latest and established models = 0.82169 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 61 components and 0.82169 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070936Jy sigma=0.000722 ! Fit after self-cal, rms=0.070591Jy sigma=0.000720 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4.5, 19.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00300487 Jy ! Component: 100 - total flux cleaned = 0.00258001 Jy ! Component: 150 - total flux cleaned = 0.00293188 Jy ! Component: 200 - total flux cleaned = 0.00293595 Jy ! Total flux subtracted in 200 components = 0.00293595 Jy ! Clean residual min=-0.006041 max=0.006285 Jy/beam ! Clean residual mean=-0.000011 rms=0.001350 Jy/beam ! Combined flux in latest and established models = 0.824626 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 78 components and 0.824626 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069345Jy sigma=0.000709 ! Fit after self-cal, rms=0.069222Jy sigma=0.000708 ! Inverting map ! Added new window around map position (-35, -76.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00291916 Jy ! Component: 100 - total flux cleaned = 0.00376273 Jy ! Component: 150 - total flux cleaned = 0.00391024 Jy ! Component: 200 - total flux cleaned = 0.00391333 Jy ! Total flux subtracted in 200 components = 0.00391333 Jy ! Clean residual min=-0.005404 max=0.005201 Jy/beam ! Clean residual mean=-0.000010 rms=0.001243 Jy/beam ! Combined flux in latest and established models = 0.828539 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 93 components and 0.828539 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068357Jy sigma=0.000700 ! Fit after self-cal, rms=0.068293Jy sigma=0.000699 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068293Jy sigma=0.000699 ! Fit after self-cal, rms=0.067731Jy sigma=0.000694 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.759 mas, bmaj=10.11 mas, bpa=1.343 degrees ! Estimated noise=1419.56 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000380633 Jy ! Component: 100 - total flux cleaned = -0.0010104 Jy ! Component: 150 - total flux cleaned = -0.00167975 Jy ! Component: 200 - total flux cleaned = -0.00225349 Jy ! Total flux subtracted in 200 components = -0.00225349 Jy ! Clean residual min=-0.003889 max=0.003744 Jy/beam ! Clean residual mean=-0.000020 rms=0.001003 Jy/beam ! Combined flux in latest and established models = 0.826286 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 114 components and 0.826286 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067459Jy sigma=0.000690 ! Fit after self-cal, rms=0.067426Jy sigma=0.000690 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000219632 Jy ! Component: 100 - total flux cleaned = -0.000847054 Jy ! Component: 150 - total flux cleaned = -0.00144968 Jy ! Component: 200 - total flux cleaned = -0.00187944 Jy ! Total flux subtracted in 200 components = -0.00187944 Jy ! Clean residual min=-0.003683 max=0.003604 Jy/beam ! Clean residual mean=-0.000017 rms=0.000959 Jy/beam ! Combined flux in latest and established models = 0.824407 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 131 components and 0.824406 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067332Jy sigma=0.000689 ! Fit after self-cal, rms=0.067316Jy sigma=0.000689 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.816 mas, bmaj=7.906 mas, bpa=3.548 degrees ! Estimated noise=1254.67 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.816 x 7.906 at 3.548 degrees (North through East) ! Clean map min=-0.0045071 max=0.74648 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067316Jy sigma=0.000689 ! Fit after self-cal, rms=0.063430Jy sigma=0.000645 ! Inverting map and beam ! Estimated beam: bmin=3.811 mas, bmaj=7.907 mas, bpa=3.508 degrees ! Estimated noise=1255.29 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000508787 Jy ! Component: 100 - total flux cleaned = -0.000335493 Jy ! Component: 150 - total flux cleaned = -8.08206e-05 Jy ! Component: 200 - total flux cleaned = 3.3411e-05 Jy ! Total flux subtracted in 200 components = 3.3411e-05 Jy ! Clean residual min=-0.004405 max=0.004413 Jy/beam ! Clean residual mean=-0.000009 rms=0.000979 Jy/beam ! Combined flux in latest and established models = 0.82444 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 144 components and 0.82444 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062739Jy sigma=0.000639 ! Fit after self-cal, rms=0.062678Jy sigma=0.000639 ! Inverting map ! Added new window around map position (-28, -40). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00307603 Jy ! Component: 100 - total flux cleaned = 0.00398609 Jy ! Component: 150 - total flux cleaned = 0.00460974 Jy ! Component: 200 - total flux cleaned = 0.00520353 Jy ! Total flux subtracted in 200 components = 0.00520353 Jy ! Clean residual min=-0.004175 max=0.003828 Jy/beam ! Clean residual mean=-0.000007 rms=0.000922 Jy/beam ! Combined flux in latest and established models = 0.829643 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 164 components and 0.829643 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062196Jy sigma=0.000634 ! Fit after self-cal, rms=0.062178Jy sigma=0.000634 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062178Jy sigma=0.000634 ! Fit after self-cal, rms=0.062075Jy sigma=0.000633 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.132 mas, bmaj=7.251 mas, bpa=1.263 degrees ! Estimated noise=1543.97 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.580539 Jy ! Component: 100 - total flux cleaned = 0.714858 Jy ! Component: 150 - total flux cleaned = 0.766143 Jy ! Component: 200 - total flux cleaned = 0.789849 Jy ! Total flux subtracted in 200 components = 0.789849 Jy ! Clean residual min=-0.008566 max=0.011443 Jy/beam ! Clean residual mean=-0.000002 rms=0.002167 Jy/beam ! Combined flux in latest and established models = 0.789849 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.789849 Jy ! Inverting map and beam ! Estimated beam: bmin=3.804 mas, bmaj=7.903 mas, bpa=3.466 degrees ! Estimated noise=1256.27 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0171603 Jy ! Component: 100 - total flux cleaned = 0.0268917 Jy ! Component: 150 - total flux cleaned = 0.030794 Jy ! Component: 200 - total flux cleaned = 0.0335465 Jy ! Total flux subtracted in 200 components = 0.0335465 Jy ! Clean residual min=-0.006926 max=0.005088 Jy/beam ! Clean residual mean=-0.000011 rms=0.001306 Jy/beam ! Combined flux in latest and established models = 0.823395 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 37 components and 0.823395 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.745 mas, bmaj=10.12 mas, bpa=1.098 degrees ! Estimated noise=1424.65 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00141472 Jy ! Component: 100 - total flux cleaned = 0.00172773 Jy ! Component: 150 - total flux cleaned = 0.00325215 Jy ! Component: 200 - total flux cleaned = 0.00457637 Jy ! Total flux subtracted in 200 components = 0.00457637 Jy ! Clean residual min=-0.003739 max=0.003706 Jy/beam ! Clean residual mean=-0.000020 rms=0.001019 Jy/beam ! Combined flux in latest and established models = 0.827972 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00086635 Jy ! Component: 100 - total flux cleaned = 0.00155191 Jy ! Component: 150 - total flux cleaned = 0.00209162 Jy ! Component: 200 - total flux cleaned = 0.00234415 Jy ! Total flux subtracted in 200 components = 0.00234415 Jy ! Clean residual min=-0.003522 max=0.003552 Jy/beam ! Clean residual mean=-0.000019 rms=0.000943 Jy/beam ! Combined flux in latest and established models = 0.830316 Jy ! Adding 74 model components to the UV plane model. ! The established model now contains 108 components and 0.830316 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.804 mas, bmaj=7.903 mas, bpa=3.466 degrees ! Estimated noise=1256.27 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00212387 Jy ! Component: 100 - total flux cleaned = 0.00350008 Jy ! Component: 150 - total flux cleaned = 0.00490479 Jy ! Component: 200 - total flux cleaned = 0.00591355 Jy ! Total flux subtracted in 200 components = 0.00591355 Jy ! Clean residual min=-0.004414 max=0.004340 Jy/beam ! Clean residual mean=-0.000009 rms=0.001038 Jy/beam ! Combined flux in latest and established models = 0.836229 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 126 components and 0.836229 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063064Jy sigma=0.000643 ! Fit after self-cal, rms=0.062755Jy sigma=0.000641 wmodel J1125+2610_S_2017_04_28_pus_map.mod ! Writing 126 model components to file: J1125+2610_S_2017_04_28_pus_map.mod wobs J1125+2610_S_2017_04_28_pus_uvs.fits ! Writing UV FITS file: J1125+2610_S_2017_04_28_pus_uvs.fits wwins J1125+2610_S_2017_04_28_pus_map.win ! wwins: Wrote 5 windows to J1125+2610_S_2017_04_28_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000250301 Jy ! Component: 100 - total flux cleaned = -2.69912e-05 Jy ! Component: 150 - total flux cleaned = 0.000546722 Jy ! Component: 200 - total flux cleaned = 0.001236 Jy ! Component: 250 - total flux cleaned = 0.00183487 Jy ! Component: 300 - total flux cleaned = 0.00241557 Jy ! Component: 350 - total flux cleaned = 0.00304125 Jy ! Component: 400 - total flux cleaned = 0.00352942 Jy ! Component: 450 - total flux cleaned = 0.00406455 Jy ! Component: 500 - total flux cleaned = 0.0045274 Jy ! Component: 550 - total flux cleaned = 0.00492251 Jy ! Component: 600 - total flux cleaned = 0.00530879 Jy ! Component: 650 - total flux cleaned = 0.00579631 Jy ! Component: 700 - total flux cleaned = 0.0062204 Jy ! Component: 750 - total flux cleaned = 0.00663743 Jy ! Component: 800 - total flux cleaned = 0.00699629 Jy ! Component: 850 - total flux cleaned = 0.00734896 Jy ! Component: 900 - total flux cleaned = 0.00774695 Jy ! Component: 950 - total flux cleaned = 0.00804001 Jy ! Component: 1000 - total flux cleaned = 0.00847247 Jy ! Component: 1050 - total flux cleaned = 0.00880354 Jy ! Component: 1100 - total flux cleaned = 0.00899066 Jy ! Component: 1150 - total flux cleaned = 0.00922118 Jy ! Component: 1200 - total flux cleaned = 0.00953893 Jy ! Component: 1250 - total flux cleaned = 0.00967314 Jy ! Component: 1300 - total flux cleaned = 0.00998228 Jy ! Component: 1350 - total flux cleaned = 0.0101571 Jy ! Component: 1400 - total flux cleaned = 0.0105018 Jy ! Component: 1450 - total flux cleaned = 0.0107566 Jy ! Component: 1500 - total flux cleaned = 0.0110494 Jy ! Component: 1550 - total flux cleaned = 0.0112568 Jy ! Component: 1600 - total flux cleaned = 0.0115025 Jy ! Component: 1650 - total flux cleaned = 0.0117861 Jy ! Component: 1700 - total flux cleaned = 0.0120656 Jy ! Component: 1750 - total flux cleaned = 0.0121843 Jy ! Component: 1800 - total flux cleaned = 0.0124194 Jy ! Component: 1850 - total flux cleaned = 0.0126525 Jy ! Component: 1900 - total flux cleaned = 0.0127675 Jy ! Component: 1950 - total flux cleaned = 0.0131089 Jy ! Component: 2000 - total flux cleaned = 0.0132218 Jy ! Component: 2050 - total flux cleaned = 0.0134079 Jy ! Component: 2100 - total flux cleaned = 0.0137387 Jy ! Component: 2150 - total flux cleaned = 0.0139934 Jy ! Component: 2200 - total flux cleaned = 0.0141011 Jy ! Component: 2250 - total flux cleaned = 0.014315 Jy ! Component: 2300 - total flux cleaned = 0.0144206 Jy ! Component: 2350 - total flux cleaned = 0.0145605 Jy ! Component: 2400 - total flux cleaned = 0.0146994 Jy ! Component: 2450 - total flux cleaned = 0.0148028 Jy ! Component: 2500 - total flux cleaned = 0.0149733 Jy ! Component: 2550 - total flux cleaned = 0.0151427 Jy ! Component: 2600 - total flux cleaned = 0.0151427 Jy ! Component: 2650 - total flux cleaned = 0.0153091 Jy ! Component: 2700 - total flux cleaned = 0.0154738 Jy ! Component: 2750 - total flux cleaned = 0.0156042 Jy ! Component: 2800 - total flux cleaned = 0.0157006 Jy ! Component: 2850 - total flux cleaned = 0.0156365 Jy ! Component: 2900 - total flux cleaned = 0.0157955 Jy ! Component: 2950 - total flux cleaned = 0.0157951 Jy ! Component: 3000 - total flux cleaned = 0.0158267 Jy ! Component: 3050 - total flux cleaned = 0.0158582 Jy ! Component: 3100 - total flux cleaned = 0.0159506 Jy ! Component: 3150 - total flux cleaned = 0.0161038 Jy ! Component: 3200 - total flux cleaned = 0.0160733 Jy ! Component: 3250 - total flux cleaned = 0.0162247 Jy ! Component: 3300 - total flux cleaned = 0.0162544 Jy ! Component: 3350 - total flux cleaned = 0.0164029 Jy ! Component: 3400 - total flux cleaned = 0.0164027 Jy ! Component: 3450 - total flux cleaned = 0.0164907 Jy ! Component: 3500 - total flux cleaned = 0.016433 Jy ! Component: 3550 - total flux cleaned = 0.0165488 Jy ! Component: 3600 - total flux cleaned = 0.0168352 Jy ! Component: 3650 - total flux cleaned = 0.0168351 Jy ! Component: 3700 - total flux cleaned = 0.0168069 Jy ! Component: 3750 - total flux cleaned = 0.016779 Jy ! Component: 3800 - total flux cleaned = 0.0168627 Jy ! Component: 3850 - total flux cleaned = 0.0170288 Jy ! Component: 3900 - total flux cleaned = 0.0170012 Jy ! Component: 3950 - total flux cleaned = 0.0170284 Jy ! Component: 4000 - total flux cleaned = 0.0170556 Jy ! Component: 4050 - total flux cleaned = 0.016975 Jy ! Total flux subtracted in 4096 components = 0.0171086 Jy ! Clean residual min=-0.001343 max=0.001358 Jy/beam ! Clean residual mean=-0.000001 rms=0.000492 Jy/beam ! Combined flux in latest and established models = 0.853338 Jy keep ! Adding 271 model components to the UV plane model. ! The established model now contains 397 components and 0.853338 Jy ![Exited script file: muppet] wmap "J1125+2610_S_2017_04_28_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.804 x 7.903 at 3.466 degrees (North through East) ! Clean map min=-0.0043146 max=0.74745 Jy/beam ! Writing clean map to FITS file: J1125+2610_S_2017_04_28_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.747447 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000491785 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.197386 0.197386 0.394772 0.789544 1.57909 3.15818 6.31635 12.6327 25.2654 50.5308 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.747 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.804 x 7.903 at 3.466 degrees (North through East) ! Clean map min=-0.0043146 max=0.74745 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1125+2610_S_2017_04_28_pus_uvs.log closed on Thu May 2 16:23:50 2019