! Started logfile: J1125+2610_S_2017_03_27_pus_uvs.log on Sun Apr 28 14:39:46 2019 obs J1125+2610_S_2017_03_27_pus_uva.fits ! Reading UV FITS file: J1125+2610_S_2017_03_27_pus_uva.fits ! AN table 1: 8 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.891667 visibilities/baseline/integration-bin. ! Found source: J1125+2610 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1684 lines of history. ! ! Reading 1284 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1125+2610_S_2017_03_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 5 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 5 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 5 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.290404Jy sigma=0.002681 ! Fit after self-cal, rms=0.279877Jy sigma=0.002585 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.861 mas, bmaj=8.274 mas, bpa=-24.97 degrees ! Estimated noise=2601.39 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.610569 Jy ! Component: 100 - total flux cleaned = 0.754234 Jy ! Total flux subtracted in 100 components = 0.754234 Jy ! Clean residual min=-0.045586 max=0.075048 Jy/beam ! Clean residual mean=-0.000014 rms=0.013595 Jy/beam ! Combined flux in latest and established models = 0.754234 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.754234 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.209608Jy sigma=0.001814 ! Fit after self-cal, rms=0.209547Jy sigma=0.001814 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.471 mas, bmaj=8.481 mas, bpa=-23.27 degrees ! Estimated noise=2214.09 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-27.5, 16.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0901547 Jy ! Component: 100 - total flux cleaned = 0.143111 Jy ! Component: 150 - total flux cleaned = 0.180279 Jy ! Component: 200 - total flux cleaned = 0.206955 Jy ! Total flux subtracted in 200 components = 0.206955 Jy ! Clean residual min=-0.028386 max=0.042950 Jy/beam ! Clean residual mean=-0.000050 rms=0.008130 Jy/beam ! Combined flux in latest and established models = 0.961189 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 41 components and 0.961189 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.165033Jy sigma=0.001275 ! Fit after self-cal, rms=0.163688Jy sigma=0.001258 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.06 HN 0.93 KP 0.99 ! LA 0.96 MK 0.98 NL 0.95 OV 0.98 ! PT 0.96 SC 0.90 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.11 HN 0.97 KP 0.95 ! LA 0.92 MK 0.98 NL 1.02 OV 1.01 ! PT 0.93 SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.08 HN 0.95 KP 0.95 ! LA 0.96 MK 1.01 NL 0.98 OV 0.93 ! PT 0.92 SC 0.95 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.25 HN 0.92 KP 1.00* ! LA 0.84 MK 1.37 NL 1.00* OV 1.81 ! PT 0.96 SC 1.55 ! ! ! Fit before self-cal, rms=0.163688Jy sigma=0.001258 ! Fit after self-cal, rms=0.128698Jy sigma=0.000747 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.514 mas, bmaj=8.522 mas, bpa=-23.36 degrees ! Estimated noise=2197.14 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00890673 Jy ! Component: 100 - total flux cleaned = -0.0119175 Jy ! Component: 150 - total flux cleaned = -0.0129715 Jy ! Component: 200 - total flux cleaned = -0.013914 Jy ! Total flux subtracted in 200 components = -0.013914 Jy ! Clean residual min=-0.012003 max=0.011613 Jy/beam ! Clean residual mean=-0.000001 rms=0.002781 Jy/beam ! Combined flux in latest and established models = 0.947275 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 67 components and 0.947275 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126862Jy sigma=0.000720 ! Fit after self-cal, rms=0.127028Jy sigma=0.000719 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127028Jy sigma=0.000719 ! Fit after self-cal, rms=0.126404Jy sigma=0.000716 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.508 mas, bmaj=8.517 mas, bpa=-23.38 degrees ! Estimated noise=2198.36 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0042038 Jy ! Component: 100 - total flux cleaned = -0.00509044 Jy ! Component: 150 - total flux cleaned = -0.00605061 Jy ! Component: 200 - total flux cleaned = -0.00673256 Jy ! Total flux subtracted in 200 components = -0.00673256 Jy ! Clean residual min=-0.010481 max=0.010264 Jy/beam ! Clean residual mean=-0.000002 rms=0.002413 Jy/beam ! Combined flux in latest and established models = 0.940542 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 80 components and 0.940542 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125542Jy sigma=0.000704 ! Fit after self-cal, rms=0.125494Jy sigma=0.000703 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-66, 21.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00747921 Jy ! Component: 100 - total flux cleaned = 0.00746393 Jy ! Component: 150 - total flux cleaned = 0.00763067 Jy ! Component: 200 - total flux cleaned = 0.00796926 Jy ! Total flux subtracted in 200 components = 0.00796926 Jy ! Clean residual min=-0.009092 max=0.007788 Jy/beam ! Clean residual mean=0.000002 rms=0.002010 Jy/beam ! Combined flux in latest and established models = 0.948512 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 109 components and 0.948512 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124399Jy sigma=0.000690 ! Fit after self-cal, rms=0.124324Jy sigma=0.000689 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124324Jy sigma=0.000689 ! Fit after self-cal, rms=0.124008Jy sigma=0.000688 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.504 mas, bmaj=8.513 mas, bpa=-23.41 degrees ! Estimated noise=2196.76 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00193524 Jy ! Component: 100 - total flux cleaned = -0.00143664 Jy ! Component: 150 - total flux cleaned = -0.000696128 Jy ! Component: 200 - total flux cleaned = -0.000292074 Jy ! Total flux subtracted in 200 components = -0.000292074 Jy ! Clean residual min=-0.008116 max=0.007351 Jy/beam ! Clean residual mean=0.000003 rms=0.001779 Jy/beam ! Combined flux in latest and established models = 0.948219 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 129 components and 0.948219 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123442Jy sigma=0.000682 ! Fit after self-cal, rms=0.123417Jy sigma=0.000682 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000449101 Jy ! Component: 100 - total flux cleaned = 0.000694407 Jy ! Component: 150 - total flux cleaned = 0.000925917 Jy ! Component: 200 - total flux cleaned = 0.00103484 Jy ! Total flux subtracted in 200 components = 0.00103484 Jy ! Clean residual min=-0.007591 max=0.006894 Jy/beam ! Clean residual mean=0.000004 rms=0.001671 Jy/beam ! Combined flux in latest and established models = 0.949254 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 146 components and 0.949254 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123033Jy sigma=0.000679 ! Fit after self-cal, rms=0.123017Jy sigma=0.000678 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123017Jy sigma=0.000678 ! Fit after self-cal, rms=0.122722Jy sigma=0.000678 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.893 mas, bmaj=10.12 mas, bpa=-11.84 degrees ! Estimated noise=2534.5 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00216088 Jy ! Component: 100 - total flux cleaned = -0.00191867 Jy ! Component: 150 - total flux cleaned = -0.00171521 Jy ! Component: 200 - total flux cleaned = -0.00153403 Jy ! Total flux subtracted in 200 components = -0.00153403 Jy ! Clean residual min=-0.007139 max=0.006439 Jy/beam ! Clean residual mean=0.000006 rms=0.001732 Jy/beam ! Combined flux in latest and established models = 0.94772 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 172 components and 0.94772 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122570Jy sigma=0.000676 ! Fit after self-cal, rms=0.122515Jy sigma=0.000675 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000505797 Jy ! Component: 100 - total flux cleaned = 0.000343259 Jy ! Component: 150 - total flux cleaned = 0.000269699 Jy ! Component: 200 - total flux cleaned = 0.000340506 Jy ! Total flux subtracted in 200 components = 0.000340506 Jy ! Clean residual min=-0.006741 max=0.006331 Jy/beam ! Clean residual mean=0.000007 rms=0.001669 Jy/beam ! Combined flux in latest and established models = 0.948061 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 193 components and 0.948061 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122385Jy sigma=0.000675 ! Fit after self-cal, rms=0.122350Jy sigma=0.000675 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.503 mas, bmaj=8.509 mas, bpa=-23.43 degrees ! Estimated noise=2195.81 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.503 x 8.509 at -23.43 degrees (North through East) ! Clean map min=-0.0075424 max=0.77657 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122350Jy sigma=0.000675 ! Fit after self-cal, rms=0.122265Jy sigma=0.000632 ! Inverting map and beam ! Estimated beam: bmin=3.497 mas, bmaj=8.509 mas, bpa=-23.46 degrees ! Estimated noise=2194.03 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00062519 Jy ! Component: 100 - total flux cleaned = -0.000731714 Jy ! Component: 150 - total flux cleaned = -0.000918312 Jy ! Component: 200 - total flux cleaned = -0.00116756 Jy ! Total flux subtracted in 200 components = -0.00116756 Jy ! Clean residual min=-0.006349 max=0.005719 Jy/beam ! Clean residual mean=0.000005 rms=0.001441 Jy/beam ! Combined flux in latest and established models = 0.946893 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 214 components and 0.946893 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121908Jy sigma=0.000630 ! Fit after self-cal, rms=0.121922Jy sigma=0.000630 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.87617e-05 Jy ! Component: 100 - total flux cleaned = -0.00014444 Jy ! Component: 150 - total flux cleaned = -0.00021448 Jy ! Component: 200 - total flux cleaned = -0.000283628 Jy ! Total flux subtracted in 200 components = -0.000283628 Jy ! Clean residual min=-0.006236 max=0.005700 Jy/beam ! Clean residual mean=0.000005 rms=0.001412 Jy/beam ! Combined flux in latest and established models = 0.94661 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 225 components and 0.94661 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121702Jy sigma=0.000629 ! Fit after self-cal, rms=0.121700Jy sigma=0.000629 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121700Jy sigma=0.000629 ! Fit after self-cal, rms=0.121421Jy sigma=0.000629 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.88 mas, bmaj=8.243 mas, bpa=-25.18 degrees ! Estimated noise=2615.72 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.613683 Jy ! Component: 100 - total flux cleaned = 0.755243 Jy ! Component: 150 - total flux cleaned = 0.815524 Jy ! Component: 200 - total flux cleaned = 0.848698 Jy ! Total flux subtracted in 200 components = 0.848698 Jy ! Clean residual min=-0.017523 max=0.019967 Jy/beam ! Clean residual mean=-0.000005 rms=0.004034 Jy/beam ! Combined flux in latest and established models = 0.848698 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.848698 Jy ! Inverting map and beam ! Estimated beam: bmin=3.499 mas, bmaj=8.505 mas, bpa=-23.45 degrees ! Estimated noise=2192.8 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (25, -14.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0270711 Jy ! Component: 100 - total flux cleaned = 0.0453522 Jy ! Component: 150 - total flux cleaned = 0.0591636 Jy ! Component: 200 - total flux cleaned = 0.0688162 Jy ! Total flux subtracted in 200 components = 0.0688162 Jy ! Clean residual min=-0.010446 max=0.008566 Jy/beam ! Clean residual mean=-0.000010 rms=0.002441 Jy/beam ! Combined flux in latest and established models = 0.917514 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 63 components and 0.917514 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.887 mas, bmaj=10.11 mas, bpa=-11.91 degrees ! Estimated noise=2534.03 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0124609 Jy ! Component: 100 - total flux cleaned = 0.0204941 Jy ! Component: 150 - total flux cleaned = 0.0232604 Jy ! Component: 200 - total flux cleaned = 0.0250617 Jy ! Total flux subtracted in 200 components = 0.0250617 Jy ! Clean residual min=-0.007686 max=0.006325 Jy/beam ! Clean residual mean=-0.000001 rms=0.001845 Jy/beam ! Combined flux in latest and established models = 0.942576 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00116133 Jy ! Component: 100 - total flux cleaned = 0.00188684 Jy ! Component: 150 - total flux cleaned = 0.00253439 Jy ! Component: 200 - total flux cleaned = 0.00288947 Jy ! Total flux subtracted in 200 components = 0.00288947 Jy ! Clean residual min=-0.006895 max=0.005911 Jy/beam ! Clean residual mean=0.000004 rms=0.001649 Jy/beam ! Combined flux in latest and established models = 0.945465 Jy ! Adding 74 model components to the UV plane model. ! The established model now contains 135 components and 0.945465 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.499 mas, bmaj=8.505 mas, bpa=-23.45 degrees ! Estimated noise=2192.8 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000335379 Jy ! Component: 100 - total flux cleaned = -0.000536628 Jy ! Component: 150 - total flux cleaned = -0.000702565 Jy ! Component: 200 - total flux cleaned = -0.000550877 Jy ! Total flux subtracted in 200 components = -0.000550877 Jy ! Clean residual min=-0.006547 max=0.006095 Jy/beam ! Clean residual mean=0.000004 rms=0.001560 Jy/beam ! Combined flux in latest and established models = 0.944914 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 160 components and 0.944914 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122185Jy sigma=0.000636 ! Fit after self-cal, rms=0.122005Jy sigma=0.000633 wmodel J1125+2610_S_2017_03_27_pus_map.mod ! Writing 160 model components to file: J1125+2610_S_2017_03_27_pus_map.mod wobs J1125+2610_S_2017_03_27_pus_uvs.fits ! Writing UV FITS file: J1125+2610_S_2017_03_27_pus_uvs.fits wwins J1125+2610_S_2017_03_27_pus_map.win ! wwins: Wrote 4 windows to J1125+2610_S_2017_03_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000394482 Jy ! Component: 100 - total flux cleaned = 0.000707464 Jy ! Component: 150 - total flux cleaned = 0.000606125 Jy ! Component: 200 - total flux cleaned = 0.000153365 Jy ! Component: 250 - total flux cleaned = -0.000363606 Jy ! Component: 300 - total flux cleaned = -0.000939083 Jy ! Component: 350 - total flux cleaned = -0.00149237 Jy ! Component: 400 - total flux cleaned = -0.0021788 Jy ! Component: 450 - total flux cleaned = -0.00262088 Jy ! Component: 500 - total flux cleaned = -0.00311833 Jy ! Component: 550 - total flux cleaned = -0.00346034 Jy ! Component: 600 - total flux cleaned = -0.00379329 Jy ! Component: 650 - total flux cleaned = -0.00405197 Jy ! Component: 700 - total flux cleaned = -0.00411625 Jy ! Component: 750 - total flux cleaned = -0.00436463 Jy ! Component: 800 - total flux cleaned = -0.00448587 Jy ! Component: 850 - total flux cleaned = -0.00454421 Jy ! Component: 900 - total flux cleaned = -0.00448666 Jy ! Component: 950 - total flux cleaned = -0.00454487 Jy ! Component: 1000 - total flux cleaned = -0.00460118 Jy ! Component: 1050 - total flux cleaned = -0.00454659 Jy ! Component: 1100 - total flux cleaned = -0.0046003 Jy ! Component: 1150 - total flux cleaned = -0.00454681 Jy ! Component: 1200 - total flux cleaned = -0.00459883 Jy ! Component: 1250 - total flux cleaned = -0.00459954 Jy ! Component: 1300 - total flux cleaned = -0.00470051 Jy ! Component: 1350 - total flux cleaned = -0.00465097 Jy ! Component: 1400 - total flux cleaned = -0.00470049 Jy ! Component: 1450 - total flux cleaned = -0.00474809 Jy ! Component: 1500 - total flux cleaned = -0.0047956 Jy ! Component: 1550 - total flux cleaned = -0.00474845 Jy ! Component: 1600 - total flux cleaned = -0.00474851 Jy ! Component: 1650 - total flux cleaned = -0.00483925 Jy ! Component: 1700 - total flux cleaned = -0.00479465 Jy ! Component: 1750 - total flux cleaned = -0.00470645 Jy ! Component: 1800 - total flux cleaned = -0.00466344 Jy ! Component: 1850 - total flux cleaned = -0.00457691 Jy ! Component: 1900 - total flux cleaned = -0.00453421 Jy ! Component: 1950 - total flux cleaned = -0.00444967 Jy ! Component: 2000 - total flux cleaned = -0.00436629 Jy ! Component: 2050 - total flux cleaned = -0.00428409 Jy ! Component: 2100 - total flux cleaned = -0.00432463 Jy ! Component: 2150 - total flux cleaned = -0.00424397 Jy ! Component: 2200 - total flux cleaned = -0.00424369 Jy ! Component: 2250 - total flux cleaned = -0.00412534 Jy ! Component: 2300 - total flux cleaned = -0.00412558 Jy ! Component: 2350 - total flux cleaned = -0.00393125 Jy ! Component: 2400 - total flux cleaned = -0.00393135 Jy ! Component: 2450 - total flux cleaned = -0.00374023 Jy ! Component: 2500 - total flux cleaned = -0.00370262 Jy ! Component: 2550 - total flux cleaned = -0.00355254 Jy ! Component: 2600 - total flux cleaned = -0.00351575 Jy ! Component: 2650 - total flux cleaned = -0.00344161 Jy ! Component: 2700 - total flux cleaned = -0.00336829 Jy ! Component: 2750 - total flux cleaned = -0.00329558 Jy ! Component: 2800 - total flux cleaned = -0.0032594 Jy ! Component: 2850 - total flux cleaned = -0.00315221 Jy ! Component: 2900 - total flux cleaned = -0.00308098 Jy ! Component: 2950 - total flux cleaned = -0.002975 Jy ! Component: 3000 - total flux cleaned = -0.00297488 Jy ! Component: 3050 - total flux cleaned = -0.00290491 Jy ! Component: 3100 - total flux cleaned = -0.00280107 Jy ! Component: 3150 - total flux cleaned = -0.00276654 Jy ! Component: 3200 - total flux cleaned = -0.00266361 Jy ! Component: 3250 - total flux cleaned = -0.00256134 Jy ! Component: 3300 - total flux cleaned = -0.00245989 Jy ! Component: 3350 - total flux cleaned = -0.00242629 Jy ! Component: 3400 - total flux cleaned = -0.00235917 Jy ! Component: 3450 - total flux cleaned = -0.00229241 Jy ! Component: 3500 - total flux cleaned = -0.00225925 Jy ! Component: 3550 - total flux cleaned = -0.00232549 Jy ! Component: 3600 - total flux cleaned = -0.00239117 Jy ! Component: 3650 - total flux cleaned = -0.00252228 Jy ! Component: 3700 - total flux cleaned = -0.00248948 Jy ! Component: 3750 - total flux cleaned = -0.00258718 Jy ! Component: 3800 - total flux cleaned = -0.00255453 Jy ! Component: 3850 - total flux cleaned = -0.00265146 Jy ! Component: 3900 - total flux cleaned = -0.00265131 Jy ! Component: 3950 - total flux cleaned = -0.00274785 Jy ! Component: 4000 - total flux cleaned = -0.00287605 Jy ! Component: 4050 - total flux cleaned = -0.00287605 Jy ! Total flux subtracted in 4096 components = -0.00300354 Jy ! Clean residual min=-0.001859 max=0.002175 Jy/beam ! Clean residual mean=-0.000002 rms=0.000580 Jy/beam ! Combined flux in latest and established models = 0.941911 Jy keep ! Adding 276 model components to the UV plane model. ! The established model now contains 436 components and 0.94191 Jy ![Exited script file: muppet] wmap "J1125+2610_S_2017_03_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.499 x 8.505 at -23.45 degrees (North through East) ! Clean map min=-0.0058033 max=0.78271 Jy/beam ! Writing clean map to FITS file: J1125+2610_S_2017_03_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.78271 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000559811 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.214566 0.214566 0.429133 0.858265 1.71653 3.43306 6.86612 13.7322 27.4645 54.929 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0016 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.782 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.499 x 8.505 at -23.45 degrees (North through East) ! Clean map min=-0.0058033 max=0.78271 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1125+2610_S_2017_03_27_pus_uvs.log closed on Sun Apr 28 14:39:50 2019