! Started logfile: J1124-1501_X_2017_05_27_pus_uvs.log on Fri May 3 10:34:33 2019 obs J1124-1501_X_2017_05_27_pus_uva.fits ! Reading UV FITS file: J1124-1501_X_2017_05_27_pus_uva.fits ! AN table 1: 76 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.961404 visibilities/baseline/integration-bin. ! Found source: J1124-1501 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.44388e+09 3.2e+07 1 3.2e+07 ! 02 2 8.47588e+09 3.2e+07 1 3.2e+07 ! 03 3 8.50788e+09 3.2e+07 1 3.2e+07 ! 04 4 8.53988e+09 3.2e+07 1 3.2e+07 ! 05 5 8.60388e+09 3.2e+07 1 3.2e+07 ! 06 6 8.63588e+09 3.2e+07 1 3.2e+07 ! 07 7 8.69988e+09 3.2e+07 1 3.2e+07 ! 08 8 8.73188e+09 3.2e+07 1 3.2e+07 ! 09 9 8.79588e+09 3.2e+07 1 3.2e+07 ! 10 10 8.82788e+09 3.2e+07 1 3.2e+07 ! 11 11 8.85988e+09 3.2e+07 1 3.2e+07 ! 12 12 8.89188e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1033 lines of history. ! ! Reading 39456 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J1124-1501_X_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.883084Jy sigma=0.006911 ! Fit after self-cal, rms=0.875212Jy sigma=0.006859 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7072 mas, bmaj=1.699 mas, bpa=-2.482 degrees ! Estimated noise=811.363 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0922213 Jy ! Component: 100 - total flux cleaned = 0.120155 Jy ! Total flux subtracted in 100 components = 0.120155 Jy ! Clean residual min=-0.005577 max=0.018039 Jy/beam ! Clean residual mean=0.000073 rms=0.002176 Jy/beam ! Combined flux in latest and established models = 0.120155 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.120155 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.098053Jy sigma=0.000717 ! Fit after self-cal, rms=0.098003Jy sigma=0.000716 ! Inverting map ! Added new window around map position (1, 0.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0190751 Jy ! Component: 100 - total flux cleaned = 0.0306862 Jy ! Total flux subtracted in 100 components = 0.0306862 Jy ! Clean residual min=-0.003935 max=0.007191 Jy/beam ! Clean residual mean=0.000035 rms=0.001184 Jy/beam ! Combined flux in latest and established models = 0.150841 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 14 components and 0.150841 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.092777Jy sigma=0.000666 ! Fit after self-cal, rms=0.092637Jy sigma=0.000665 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00855545 Jy ! Component: 100 - total flux cleaned = 0.013839 Jy ! Total flux subtracted in 100 components = 0.013839 Jy ! Clean residual min=-0.003151 max=0.003788 Jy/beam ! Clean residual mean=0.000018 rms=0.000795 Jy/beam ! Combined flux in latest and established models = 0.16468 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 30 components and 0.16468 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.091538Jy sigma=0.000654 ! Fit after self-cal, rms=0.091504Jy sigma=0.000653 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8821 mas, bmaj=2.025 mas, bpa=-1.778 degrees ! Estimated noise=460.451 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00581521 Jy ! Component: 100 - total flux cleaned = 0.00860215 Jy ! Component: 150 - total flux cleaned = 0.0101354 Jy ! Component: 200 - total flux cleaned = 0.0106727 Jy ! Total flux subtracted in 200 components = 0.0106727 Jy ! Clean residual min=-0.002198 max=0.002159 Jy/beam ! Clean residual mean=0.000006 rms=0.000505 Jy/beam ! Combined flux in latest and established models = 0.175352 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 47 components and 0.175352 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.091192Jy sigma=0.000650 ! Fit after self-cal, rms=0.091176Jy sigma=0.000650 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.01 HN 1.04 KP 0.99 ! LA 0.98 MK 1.00 NL 0.97 OV 0.97 ! PT 1.00 SC 1.03 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.97 HN 1.08 KP 0.96 ! LA 0.99 MK 0.95 NL 1.00 OV 1.00 ! PT 1.01 SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.98 HN 1.04 KP 1.02 ! LA 0.98 MK 0.98 NL 0.96 OV 1.01 ! PT 1.03 SC 1.05 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.97 HN 1.09 KP 1.01 ! LA 0.98 MK 1.04 NL 0.98 OV 1.02 ! PT 1.06 SC 0.99 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.97 HN 1.05 KP 1.03 ! LA 1.00 MK 1.03 NL 0.97 OV 0.99 ! PT 1.03 SC 0.98 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.97 HN 1.06 KP 1.01 ! LA 0.99 MK 1.03 NL 0.96 OV 0.99 ! PT 1.03 SC 1.00 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.97 HN 1.03 KP 0.97 ! LA 1.00 MK 1.05 NL 0.95 OV 1.02 ! PT 1.02 SC 1.04 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.04 HN 1.05 KP 0.99 ! LA 0.97 MK 0.99 NL 0.98 OV 1.01 ! PT 1.07 SC 1.09 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00 HN 1.06 KP 1.02 ! LA 0.98 MK 0.97 NL 0.99 OV 0.99 ! PT 1.01 SC 1.00 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.98 HN 1.01 KP 1.02 ! LA 0.99 MK 0.99 NL 0.99 OV 1.01 ! PT 1.05 SC 1.01 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00 HN 1.08 KP 0.99 ! LA 1.00 MK 0.98 NL 0.98 OV 1.00 ! PT 1.07 SC 1.02 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.00 HN 1.02 KP 0.99 ! LA 1.00 MK 0.94 NL 0.98 OV 1.04 ! PT 1.06 SC 1.02 ! ! ! Fit before self-cal, rms=0.091176Jy sigma=0.000650 ! Fit after self-cal, rms=0.091762Jy sigma=0.000648 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8864 mas, bmaj=2.027 mas, bpa=-1.938 degrees ! Estimated noise=460.493 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000292276 Jy ! Component: 100 - total flux cleaned = 0.00029685 Jy ! Component: 150 - total flux cleaned = 0.000224965 Jy ! Component: 200 - total flux cleaned = 0.000184221 Jy ! Total flux subtracted in 200 components = 0.000184221 Jy ! Clean residual min=-0.001551 max=0.001352 Jy/beam ! Clean residual mean=0.000006 rms=0.000356 Jy/beam ! Combined flux in latest and established models = 0.175537 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 52 components and 0.175537 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.091745Jy sigma=0.000648 ! Fit after self-cal, rms=0.091763Jy sigma=0.000648 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.091763Jy sigma=0.000648 ! Fit after self-cal, rms=0.092120Jy sigma=0.000647 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8864 mas, bmaj=2.033 mas, bpa=-1.832 degrees ! Estimated noise=460.76 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000388447 Jy ! Component: 100 - total flux cleaned = 0.000353509 Jy ! Component: 150 - total flux cleaned = 0.000340331 Jy ! Component: 200 - total flux cleaned = 0.000339507 Jy ! Total flux subtracted in 200 components = 0.000339507 Jy ! Clean residual min=-0.001375 max=0.001067 Jy/beam ! Clean residual mean=0.000003 rms=0.000300 Jy/beam ! Combined flux in latest and established models = 0.175876 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 60 components and 0.175876 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.092113Jy sigma=0.000647 ! Fit after self-cal, rms=0.092122Jy sigma=0.000647 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.89771e-05 Jy ! Component: 100 - total flux cleaned = 3.23178e-05 Jy ! Component: 150 - total flux cleaned = 2.2824e-05 Jy ! Component: 200 - total flux cleaned = 2.24284e-05 Jy ! Total flux subtracted in 200 components = 2.24284e-05 Jy ! Clean residual min=-0.001341 max=0.001069 Jy/beam ! Clean residual mean=0.000003 rms=0.000296 Jy/beam ! Combined flux in latest and established models = 0.175899 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 64 components and 0.175899 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.092118Jy sigma=0.000647 ! Fit after self-cal, rms=0.092118Jy sigma=0.000647 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.092118Jy sigma=0.000647 ! Fit after self-cal, rms=0.092130Jy sigma=0.000647 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8867 mas, bmaj=2.034 mas, bpa=-1.876 degrees ! Estimated noise=460.907 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000146992 Jy ! Component: 100 - total flux cleaned = 0.00014576 Jy ! Component: 150 - total flux cleaned = 0.000136976 Jy ! Component: 200 - total flux cleaned = 0.000136611 Jy ! Total flux subtracted in 200 components = 0.000136611 Jy ! Clean residual min=-0.001301 max=0.001080 Jy/beam ! Clean residual mean=0.000003 rms=0.000291 Jy/beam ! Combined flux in latest and established models = 0.176035 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 68 components and 0.176035 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.092127Jy sigma=0.000647 ! Fit after self-cal, rms=0.092127Jy sigma=0.000647 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.02263e-05 Jy ! Component: 100 - total flux cleaned = 3.10149e-05 Jy ! Component: 150 - total flux cleaned = 1.5171e-05 Jy ! Component: 200 - total flux cleaned = 7.62838e-06 Jy ! Total flux subtracted in 200 components = 7.62838e-06 Jy ! Clean residual min=-0.001278 max=0.001086 Jy/beam ! Clean residual mean=0.000003 rms=0.000289 Jy/beam ! Combined flux in latest and established models = 0.176043 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 68 components and 0.176043 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.092125Jy sigma=0.000647 ! Fit after self-cal, rms=0.092125Jy sigma=0.000647 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.092125Jy sigma=0.000647 ! Fit after self-cal, rms=0.092168Jy sigma=0.000647 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.217 mas, bmaj=4.058 mas, bpa=1.36 degrees ! Estimated noise=575.619 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.23366e-05 Jy ! Component: 100 - total flux cleaned = 1.03168e-05 Jy ! Component: 150 - total flux cleaned = 1.87509e-05 Jy ! Component: 200 - total flux cleaned = 3.67498e-05 Jy ! Total flux subtracted in 200 components = 3.67498e-05 Jy ! Clean residual min=-0.001280 max=0.001270 Jy/beam ! Clean residual mean=0.000007 rms=0.000354 Jy/beam ! Combined flux in latest and established models = 0.17608 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 77 components and 0.17608 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.092168Jy sigma=0.000647 ! Fit after self-cal, rms=0.092167Jy sigma=0.000647 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.10234e-05 Jy ! Component: 100 - total flux cleaned = 4.85253e-05 Jy ! Component: 150 - total flux cleaned = 5.57011e-05 Jy ! Component: 200 - total flux cleaned = 6.74596e-05 Jy ! Total flux subtracted in 200 components = 6.74596e-05 Jy ! Clean residual min=-0.001288 max=0.001270 Jy/beam ! Clean residual mean=0.000007 rms=0.000352 Jy/beam ! Combined flux in latest and established models = 0.176147 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 77 components and 0.176147 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.092168Jy sigma=0.000647 ! Fit after self-cal, rms=0.092167Jy sigma=0.000647 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.8872 mas, bmaj=2.035 mas, bpa=-1.891 degrees ! Estimated noise=461.184 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8872 x 2.035 at -1.891 degrees (North through East) ! Clean map min=-0.0011721 max=0.12453 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7115 mas, bmaj=1.706 mas, bpa=-2.556 degrees ! Estimated noise=813.566 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0918994 Jy ! Component: 100 - total flux cleaned = 0.123574 Jy ! Component: 150 - total flux cleaned = 0.141121 Jy ! Component: 200 - total flux cleaned = 0.152231 Jy ! Total flux subtracted in 200 components = 0.152231 Jy ! Clean residual min=-0.003077 max=0.005923 Jy/beam ! Clean residual mean=0.000032 rms=0.000927 Jy/beam ! Combined flux in latest and established models = 0.152231 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.152231 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8872 mas, bmaj=2.035 mas, bpa=-1.891 degrees ! Estimated noise=461.184 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0110514 Jy ! Component: 100 - total flux cleaned = 0.0167418 Jy ! Component: 150 - total flux cleaned = 0.0198231 Jy ! Component: 200 - total flux cleaned = 0.0215704 Jy ! Total flux subtracted in 200 components = 0.0215704 Jy ! Clean residual min=-0.001225 max=0.001193 Jy/beam ! Clean residual mean=0.000010 rms=0.000310 Jy/beam ! Combined flux in latest and established models = 0.173801 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 35 components and 0.173801 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.217 mas, bmaj=4.058 mas, bpa=1.36 degrees ! Estimated noise=575.619 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00130958 Jy ! Component: 100 - total flux cleaned = 0.00187124 Jy ! Component: 150 - total flux cleaned = 0.00213005 Jy ! Component: 200 - total flux cleaned = 0.00218962 Jy ! Total flux subtracted in 200 components = 0.00218962 Jy ! Clean residual min=-0.001225 max=0.001277 Jy/beam ! Clean residual mean=0.000008 rms=0.000347 Jy/beam ! Combined flux in latest and established models = 0.175991 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.99457e-05 Jy ! Component: 100 - total flux cleaned = 3.81181e-05 Jy ! Component: 150 - total flux cleaned = 5.49337e-05 Jy ! Component: 200 - total flux cleaned = 7.02446e-05 Jy ! Total flux subtracted in 200 components = 7.02446e-05 Jy ! Clean residual min=-0.001233 max=0.001267 Jy/beam ! Clean residual mean=0.000008 rms=0.000346 Jy/beam ! Combined flux in latest and established models = 0.176061 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 48 components and 0.176061 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8872 mas, bmaj=2.035 mas, bpa=-1.891 degrees ! Estimated noise=461.184 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.38321e-05 Jy ! Component: 100 - total flux cleaned = -6.24348e-05 Jy ! Component: 150 - total flux cleaned = -3.15909e-05 Jy ! Component: 200 - total flux cleaned = -1.83962e-05 Jy ! Total flux subtracted in 200 components = -1.83962e-05 Jy ! Clean residual min=-0.001170 max=0.001062 Jy/beam ! Clean residual mean=0.000004 rms=0.000284 Jy/beam ! Combined flux in latest and established models = 0.176043 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 59 components and 0.176043 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.092166Jy sigma=0.000647 ! Fit after self-cal, rms=0.092163Jy sigma=0.000647 wmodel J1124-1501_X_2017_05_27_pus_map.mod ! Writing 59 model components to file: J1124-1501_X_2017_05_27_pus_map.mod wobs J1124-1501_X_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J1124-1501_X_2017_05_27_pus_uvs.fits wwins J1124-1501_X_2017_05_27_pus_map.win ! wwins: Wrote 2 windows to J1124-1501_X_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000395391 Jy ! Component: 100 - total flux cleaned = -0.000526412 Jy ! Component: 150 - total flux cleaned = -0.000493078 Jy ! Component: 200 - total flux cleaned = -0.000476798 Jy ! Component: 250 - total flux cleaned = -0.000509451 Jy ! Component: 300 - total flux cleaned = -0.000494294 Jy ! Component: 350 - total flux cleaned = -0.000539552 Jy ! Component: 400 - total flux cleaned = -0.000569204 Jy ! Component: 450 - total flux cleaned = -0.000669575 Jy ! Component: 500 - total flux cleaned = -0.000655233 Jy ! Component: 550 - total flux cleaned = -0.000682713 Jy ! Component: 600 - total flux cleaned = -0.000709511 Jy ! Component: 650 - total flux cleaned = -0.000762046 Jy ! Component: 700 - total flux cleaned = -0.000749195 Jy ! Component: 750 - total flux cleaned = -0.000812393 Jy ! Component: 800 - total flux cleaned = -0.000849274 Jy ! Component: 850 - total flux cleaned = -0.000873616 Jy ! Component: 900 - total flux cleaned = -0.00088555 Jy ! Component: 950 - total flux cleaned = -0.000909293 Jy ! Component: 1000 - total flux cleaned = -0.00094432 Jy ! Component: 1050 - total flux cleaned = -0.00100179 Jy ! Component: 1100 - total flux cleaned = -0.00105818 Jy ! Component: 1150 - total flux cleaned = -0.00108062 Jy ! Component: 1200 - total flux cleaned = -0.00117962 Jy ! Component: 1250 - total flux cleaned = -0.00123366 Jy ! Component: 1300 - total flux cleaned = -0.00126552 Jy ! Component: 1350 - total flux cleaned = -0.00129727 Jy ! Component: 1400 - total flux cleaned = -0.00132877 Jy ! Component: 1450 - total flux cleaned = -0.00138046 Jy ! Component: 1500 - total flux cleaned = -0.00140084 Jy ! Component: 1550 - total flux cleaned = -0.00144123 Jy ! Component: 1600 - total flux cleaned = -0.00145125 Jy ! Component: 1650 - total flux cleaned = -0.00149085 Jy ! Component: 1700 - total flux cleaned = -0.00153965 Jy ! Component: 1750 - total flux cleaned = -0.00157832 Jy ! Component: 1800 - total flux cleaned = -0.0015688 Jy ! Component: 1850 - total flux cleaned = -0.00164462 Jy ! Component: 1900 - total flux cleaned = -0.00165397 Jy ! Component: 1950 - total flux cleaned = -0.0016816 Jy ! Component: 2000 - total flux cleaned = -0.00167239 Jy ! Total flux subtracted in 2048 components = -0.00173613 Jy ! Clean residual min=-0.000521 max=0.000568 Jy/beam ! Clean residual mean=0.000000 rms=0.000165 Jy/beam ! Combined flux in latest and established models = 0.174307 Jy keep ! Adding 130 model components to the UV plane model. ! The established model now contains 189 components and 0.174307 Jy ![Exited script file: muppet] wmap "J1124-1501_X_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8872 x 2.035 at -1.891 degrees (North through East) ! Clean map min=-0.00096888 max=0.12451 Jy/beam ! Writing clean map to FITS file: J1124-1501_X_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.124509 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000164599 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.396594 0.396594 0.793187 1.58637 3.17275 6.3455 12.691 25.382 50.764 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.124 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8872 x 2.035 at -1.891 degrees (North through East) ! Clean map min=-0.00096888 max=0.12451 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1124-1501_X_2017_05_27_pus_uvs.log closed on Fri May 3 10:34:36 2019