! Started logfile: J1124-1501_S_2017_05_27_pus_uvs.log on Fri May 3 11:04:55 2019 obs J1124-1501_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J1124-1501_S_2017_05_27_pus_uva.fits ! AN table 1: 76 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.961404 visibilities/baseline/integration-bin. ! Found source: J1124-1501 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 13152 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1124-1501_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 41 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 92 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 398 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.757109Jy sigma=0.061081 ! Fit after self-cal, rms=0.752571Jy sigma=0.061048 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.457 mas, bmaj=7.638 mas, bpa=12.42 degrees ! Estimated noise=401.008 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0552323 Jy ! Component: 100 - total flux cleaned = 0.0837712 Jy ! Total flux subtracted in 100 components = 0.0837712 Jy ! Clean residual min=-0.017814 max=0.040454 Jy/beam ! Clean residual mean=-0.000127 rms=0.006901 Jy/beam ! Combined flux in latest and established models = 0.0837713 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.0837713 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.258966Jy sigma=0.003654 ! Fit after self-cal, rms=0.258478Jy sigma=0.003652 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.922 mas, bmaj=7.821 mas, bpa=6.592 degrees ! Estimated noise=346.748 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-38, 51.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0498568 Jy ! Component: 100 - total flux cleaned = 0.0828268 Jy ! Component: 150 - total flux cleaned = 0.108945 Jy ! Component: 200 - total flux cleaned = 0.129702 Jy ! Total flux subtracted in 200 components = 0.129702 Jy ! Clean residual min=-0.022059 max=0.044985 Jy/beam ! Clean residual mean=-0.000151 rms=0.006916 Jy/beam ! Combined flux in latest and established models = 0.213473 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 14 components and 0.213473 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.218379Jy sigma=0.003500 ! Fit after self-cal, rms=0.214266Jy sigma=0.003472 ! Inverting map ! Added new window around map position (38, -51.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0336875 Jy ! Component: 100 - total flux cleaned = 0.0555494 Jy ! Component: 150 - total flux cleaned = 0.0733823 Jy ! Component: 200 - total flux cleaned = 0.0882831 Jy ! Total flux subtracted in 200 components = 0.0882831 Jy ! Clean residual min=-0.015060 max=0.019058 Jy/beam ! Clean residual mean=-0.000094 rms=0.004540 Jy/beam ! Combined flux in latest and established models = 0.301756 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 31 components and 0.301756 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.198505Jy sigma=0.002566 ! Fit after self-cal, rms=0.194385Jy sigma=0.002553 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 11.46 FD 0.61 HN 0.77 KP 0.95 ! LA 0.93 MK 0.92 NL 0.79 OV 0.82 ! PT 1.02 SC 0.67 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 12.56 FD 0.62 HN 0.86 KP 0.90 ! LA 0.90 MK 0.91 NL 0.88 OV 0.91 ! PT 0.98 SC 0.82 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.64 HN 0.82 KP 0.93 ! LA 0.92 MK 0.92 NL 0.91 OV 0.84 ! PT 0.96 SC 0.76 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.63 HN 0.81 KP 1.00* ! LA 0.74 MK 1.31 NL 1.00* OV 1.00* ! PT 1.01 SC 1.00* ! ! ! Fit before self-cal, rms=0.194385Jy sigma=0.002553 ! Fit after self-cal, rms=1.170200Jy sigma=0.000973 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.377 mas, bmaj=8.103 mas, bpa=-0.5814 degrees ! Estimated noise=717.017 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00344643 Jy ! Component: 100 - total flux cleaned = -0.00833874 Jy ! Component: 150 - total flux cleaned = -0.0137524 Jy ! Component: 200 - total flux cleaned = -0.0180016 Jy ! Total flux subtracted in 200 components = -0.0180016 Jy ! Clean residual min=-0.012448 max=0.011753 Jy/beam ! Clean residual mean=0.000005 rms=0.002414 Jy/beam ! Combined flux in latest and established models = 0.283754 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 37 components and 0.283754 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.160097Jy sigma=0.000917 ! Fit after self-cal, rms=1.159704Jy sigma=0.000884 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.159704Jy sigma=0.000884 ! Fit after self-cal, rms=1.561642Jy sigma=0.000783 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.324 mas, bmaj=8.223 mas, bpa=-1.677 degrees ! Estimated noise=725.267 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00371535 Jy ! Component: 100 - total flux cleaned = -0.00804353 Jy ! Component: 150 - total flux cleaned = -0.0118605 Jy ! Component: 200 - total flux cleaned = -0.0145443 Jy ! Total flux subtracted in 200 components = -0.0145443 Jy ! Clean residual min=-0.009344 max=0.006440 Jy/beam ! Clean residual mean=-0.000014 rms=0.001800 Jy/beam ! Combined flux in latest and established models = 0.26921 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 48 components and 0.26921 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.558221Jy sigma=0.000769 ! Fit after self-cal, rms=1.558204Jy sigma=0.000767 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00289478 Jy ! Component: 100 - total flux cleaned = -0.00421723 Jy ! Component: 150 - total flux cleaned = -0.00539941 Jy ! Component: 200 - total flux cleaned = -0.00630589 Jy ! Total flux subtracted in 200 components = -0.00630589 Jy ! Clean residual min=-0.007932 max=0.005912 Jy/beam ! Clean residual mean=-0.000014 rms=0.001619 Jy/beam ! Combined flux in latest and established models = 0.262904 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 63 components and 0.262904 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.556810Jy sigma=0.000764 ! Fit after self-cal, rms=1.556799Jy sigma=0.000763 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.556799Jy sigma=0.000763 ! Fit after self-cal, rms=2.030066Jy sigma=0.000752 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.312 mas, bmaj=8.247 mas, bpa=-2.091 degrees ! Estimated noise=752.048 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00143641 Jy ! Component: 100 - total flux cleaned = -0.00405331 Jy ! Component: 150 - total flux cleaned = -0.00653382 Jy ! Component: 200 - total flux cleaned = -0.00808092 Jy ! Total flux subtracted in 200 components = -0.00808092 Jy ! Clean residual min=-0.006870 max=0.005141 Jy/beam ! Clean residual mean=-0.000006 rms=0.001540 Jy/beam ! Combined flux in latest and established models = 0.254823 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 68 components and 0.254823 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.027479Jy sigma=0.000748 ! Fit after self-cal, rms=2.027474Jy sigma=0.000747 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00140552 Jy ! Component: 100 - total flux cleaned = -0.00177517 Jy ! Component: 150 - total flux cleaned = -0.00245105 Jy ! Component: 200 - total flux cleaned = -0.00292539 Jy ! Total flux subtracted in 200 components = -0.00292539 Jy ! Clean residual min=-0.005974 max=0.005180 Jy/beam ! Clean residual mean=-0.000004 rms=0.001448 Jy/beam ! Combined flux in latest and established models = 0.251898 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 80 components and 0.251898 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.026145Jy sigma=0.000747 ! Fit after self-cal, rms=2.026145Jy sigma=0.000747 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.026145Jy sigma=0.000747 ! Fit after self-cal, rms=2.452978Jy sigma=0.000740 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.608 mas, bmaj=15.49 mas, bpa=-0.8807 degrees ! Estimated noise=957.941 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00212275 Jy ! Component: 100 - total flux cleaned = -0.00356009 Jy ! Component: 150 - total flux cleaned = -0.00428949 Jy ! Component: 200 - total flux cleaned = -0.00472167 Jy ! Total flux subtracted in 200 components = -0.00472167 Jy ! Clean residual min=-0.005592 max=0.004986 Jy/beam ! Clean residual mean=0.000015 rms=0.001740 Jy/beam ! Combined flux in latest and established models = 0.247176 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 104 components and 0.247176 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.450681Jy sigma=0.000741 ! Fit after self-cal, rms=2.450682Jy sigma=0.000741 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000736188 Jy ! Component: 100 - total flux cleaned = -0.00112006 Jy ! Component: 150 - total flux cleaned = -0.00166677 Jy ! Component: 200 - total flux cleaned = -0.00201781 Jy ! Total flux subtracted in 200 components = -0.00201781 Jy ! Clean residual min=-0.005339 max=0.004712 Jy/beam ! Clean residual mean=0.000020 rms=0.001625 Jy/beam ! Combined flux in latest and established models = 0.245158 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 112 components and 0.245158 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.449252Jy sigma=0.000743 ! Fit after self-cal, rms=2.449255Jy sigma=0.000743 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.303 mas, bmaj=8.25 mas, bpa=-2.363 degrees ! Estimated noise=773.381 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.303 x 8.25 at -2.363 degrees (North through East) ! Clean map min=-0.0069821 max=0.17958 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.692 mas, bmaj=7.07 mas, bpa=-1.513 degrees ! Estimated noise=1158.09 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.155306 Jy ! Component: 100 - total flux cleaned = 0.190389 Jy ! Component: 150 - total flux cleaned = 0.20503 Jy ! Component: 200 - total flux cleaned = 0.214676 Jy ! Total flux subtracted in 200 components = 0.214676 Jy ! Clean residual min=-0.006791 max=0.008502 Jy/beam ! Clean residual mean=-0.000026 rms=0.001733 Jy/beam ! Combined flux in latest and established models = 0.214676 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.214676 Jy ! Inverting map and beam ! Estimated beam: bmin=3.303 mas, bmaj=8.25 mas, bpa=-2.363 degrees ! Estimated noise=773.381 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-45.5, 62). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0104638 Jy ! Component: 100 - total flux cleaned = 0.0171119 Jy ! Component: 150 - total flux cleaned = 0.0202156 Jy ! Component: 200 - total flux cleaned = 0.0216318 Jy ! Total flux subtracted in 200 components = 0.0216318 Jy ! Clean residual min=-0.006091 max=0.006897 Jy/beam ! Clean residual mean=-0.000005 rms=0.001384 Jy/beam ! Combined flux in latest and established models = 0.236308 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 66 components and 0.236308 Jy ! Inverting map ! Added new window around map position (46, -60.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00377796 Jy ! Component: 100 - total flux cleaned = 0.00427789 Jy ! Component: 150 - total flux cleaned = 0.00502363 Jy ! Component: 200 - total flux cleaned = 0.00544683 Jy ! Total flux subtracted in 200 components = 0.00544683 Jy ! Clean residual min=-0.005743 max=0.004645 Jy/beam ! Clean residual mean=0.000004 rms=0.001240 Jy/beam ! Combined flux in latest and established models = 0.241755 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 93 components and 0.241755 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.608 mas, bmaj=15.49 mas, bpa=-0.8807 degrees ! Estimated noise=957.941 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00156087 Jy ! Component: 100 - total flux cleaned = 0.00156721 Jy ! Component: 150 - total flux cleaned = 0.00144744 Jy ! Component: 200 - total flux cleaned = 0.00133382 Jy ! Total flux subtracted in 200 components = 0.00133382 Jy ! Clean residual min=-0.005341 max=0.004628 Jy/beam ! Clean residual mean=0.000017 rms=0.001493 Jy/beam ! Combined flux in latest and established models = 0.243089 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000110578 Jy ! Component: 100 - total flux cleaned = 0.000110179 Jy ! Component: 150 - total flux cleaned = 0.000109924 Jy ! Component: 200 - total flux cleaned = 0.0002064 Jy ! Total flux subtracted in 200 components = 0.0002064 Jy ! Clean residual min=-0.004996 max=0.004724 Jy/beam ! Clean residual mean=0.000018 rms=0.001466 Jy/beam ! Combined flux in latest and established models = 0.243295 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 124 components and 0.243295 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.303 mas, bmaj=8.25 mas, bpa=-2.363 degrees ! Estimated noise=773.381 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000895286 Jy ! Component: 100 - total flux cleaned = -0.000666732 Jy ! Component: 150 - total flux cleaned = -0.00012139 Jy ! Component: 200 - total flux cleaned = 0.000287254 Jy ! Total flux subtracted in 200 components = 0.000287254 Jy ! Clean residual min=-0.004981 max=0.004279 Jy/beam ! Clean residual mean=0.000009 rms=0.001146 Jy/beam ! Combined flux in latest and established models = 0.243582 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 143 components and 0.243583 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.443190Jy sigma=0.000748 ! Fit after self-cal, rms=2.443150Jy sigma=0.000747 wmodel J1124-1501_S_2017_05_27_pus_map.mod ! Writing 143 model components to file: J1124-1501_S_2017_05_27_pus_map.mod wobs J1124-1501_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J1124-1501_S_2017_05_27_pus_uvs.fits wwins J1124-1501_S_2017_05_27_pus_map.win ! wwins: Wrote 5 windows to J1124-1501_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00143694 Jy ! Component: 100 - total flux cleaned = -0.00197532 Jy ! Component: 150 - total flux cleaned = -0.0022706 Jy ! Component: 200 - total flux cleaned = -0.00262364 Jy ! Component: 250 - total flux cleaned = -0.00275944 Jy ! Component: 300 - total flux cleaned = -0.00302424 Jy ! Component: 350 - total flux cleaned = -0.00334541 Jy ! Component: 400 - total flux cleaned = -0.00353367 Jy ! Component: 450 - total flux cleaned = -0.0037171 Jy ! Component: 500 - total flux cleaned = -0.00371614 Jy ! Component: 550 - total flux cleaned = -0.00365684 Jy ! Component: 600 - total flux cleaned = -0.00359826 Jy ! Component: 650 - total flux cleaned = -0.0035989 Jy ! Component: 700 - total flux cleaned = -0.0035991 Jy ! Component: 750 - total flux cleaned = -0.00371101 Jy ! Component: 800 - total flux cleaned = -0.00376559 Jy ! Component: 850 - total flux cleaned = -0.00392801 Jy ! Component: 900 - total flux cleaned = -0.00387382 Jy ! Component: 950 - total flux cleaned = -0.00387374 Jy ! Component: 1000 - total flux cleaned = -0.00382135 Jy ! Component: 1050 - total flux cleaned = -0.00382155 Jy ! Component: 1100 - total flux cleaned = -0.00387293 Jy ! Component: 1150 - total flux cleaned = -0.00387311 Jy ! Component: 1200 - total flux cleaned = -0.00387317 Jy ! Component: 1250 - total flux cleaned = -0.00392283 Jy ! Component: 1300 - total flux cleaned = -0.00382429 Jy ! Component: 1350 - total flux cleaned = -0.00392198 Jy ! Component: 1400 - total flux cleaned = -0.00382503 Jy ! Component: 1450 - total flux cleaned = -0.00372948 Jy ! Component: 1500 - total flux cleaned = -0.00363454 Jy ! Component: 1550 - total flux cleaned = -0.00368142 Jy ! Component: 1600 - total flux cleaned = -0.0036339 Jy ! Component: 1650 - total flux cleaned = -0.0034946 Jy ! Component: 1700 - total flux cleaned = -0.00340289 Jy ! Component: 1750 - total flux cleaned = -0.00331133 Jy ! Component: 1800 - total flux cleaned = -0.00322111 Jy ! Component: 1850 - total flux cleaned = -0.00322112 Jy ! Component: 1900 - total flux cleaned = -0.00313217 Jy ! Component: 1950 - total flux cleaned = -0.00308762 Jy ! Component: 2000 - total flux cleaned = -0.00304374 Jy ! Component: 2050 - total flux cleaned = -0.00286916 Jy ! Component: 2100 - total flux cleaned = -0.00295618 Jy ! Component: 2150 - total flux cleaned = -0.00295601 Jy ! Component: 2200 - total flux cleaned = -0.00291323 Jy ! Component: 2250 - total flux cleaned = -0.00282814 Jy ! Component: 2300 - total flux cleaned = -0.00278597 Jy ! Component: 2350 - total flux cleaned = -0.00278604 Jy ! Component: 2400 - total flux cleaned = -0.00286938 Jy ! Component: 2450 - total flux cleaned = -0.00274488 Jy ! Component: 2500 - total flux cleaned = -0.00278614 Jy ! Component: 2550 - total flux cleaned = -0.00270389 Jy ! Component: 2600 - total flux cleaned = -0.00266344 Jy ! Component: 2650 - total flux cleaned = -0.00266332 Jy ! Component: 2700 - total flux cleaned = -0.00262289 Jy ! Component: 2750 - total flux cleaned = -0.00258295 Jy ! Component: 2800 - total flux cleaned = -0.00254317 Jy ! Component: 2850 - total flux cleaned = -0.00270179 Jy ! Component: 2900 - total flux cleaned = -0.00262272 Jy ! Component: 2950 - total flux cleaned = -0.00262275 Jy ! Component: 3000 - total flux cleaned = -0.00262279 Jy ! Component: 3050 - total flux cleaned = -0.00270071 Jy ! Component: 3100 - total flux cleaned = -0.00277797 Jy ! Component: 3150 - total flux cleaned = -0.00270101 Jy ! Component: 3200 - total flux cleaned = -0.00277769 Jy ! Component: 3250 - total flux cleaned = -0.00273969 Jy ! Component: 3300 - total flux cleaned = -0.00277753 Jy ! Component: 3350 - total flux cleaned = -0.0029668 Jy ! Component: 3400 - total flux cleaned = -0.00289156 Jy ! Component: 3450 - total flux cleaned = -0.00285432 Jy ! Component: 3500 - total flux cleaned = -0.00285447 Jy ! Component: 3550 - total flux cleaned = -0.00296568 Jy ! Component: 3600 - total flux cleaned = -0.00292852 Jy ! Component: 3650 - total flux cleaned = -0.00292843 Jy ! Component: 3700 - total flux cleaned = -0.00300168 Jy ! Component: 3750 - total flux cleaned = -0.00296513 Jy ! Component: 3800 - total flux cleaned = -0.00300148 Jy ! Component: 3850 - total flux cleaned = -0.0029653 Jy ! Component: 3900 - total flux cleaned = -0.00307342 Jy ! Component: 3950 - total flux cleaned = -0.00300157 Jy ! Component: 4000 - total flux cleaned = -0.00303743 Jy ! Component: 4050 - total flux cleaned = -0.00303737 Jy ! Total flux subtracted in 4096 components = -0.00310841 Jy ! Clean residual min=-0.001970 max=0.001915 Jy/beam ! Clean residual mean=-0.000000 rms=0.000679 Jy/beam ! Combined flux in latest and established models = 0.240474 Jy keep ! Adding 291 model components to the UV plane model. ! The established model now contains 434 components and 0.240474 Jy ![Exited script file: muppet] wmap "J1124-1501_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.303 x 8.25 at -2.363 degrees (North through East) ! Clean map min=-0.0088807 max=0.19416 Jy/beam ! Writing clean map to FITS file: J1124-1501_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.194156 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000677213 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.0464 1.0464 2.09279 4.18559 8.37118 16.7424 33.4847 66.9694 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.002 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.194 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.303 x 8.25 at -2.363 degrees (North through East) ! Clean map min=-0.0088807 max=0.19416 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1124-1501_S_2017_05_27_pus_uvs.log closed on Fri May 3 11:05:00 2019