! Started logfile: J1124+6555_S_2017_03_27_pus_uvs.log on Sun Apr 28 14:39:40 2019 obs J1124+6555_S_2017_03_27_pus_uva.fits ! Reading UV FITS file: J1124+6555_S_2017_03_27_pus_uva.fits ! AN table 1: 150 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.872444 visibilities/baseline/integration-bin. ! Found source: J1124+6555 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1684 lines of history. ! ! Reading 23556 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1124+6555_S_2017_03_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 105 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 105 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 105 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 580 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.878050Jy sigma=0.007688 ! Fit after self-cal, rms=0.871524Jy sigma=0.007640 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.353 mas, bmaj=4.153 mas, bpa=61.74 degrees ! Estimated noise=994.576 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.100119 Jy ! Component: 100 - total flux cleaned = 0.127274 Jy ! Total flux subtracted in 100 components = 0.127274 Jy ! Clean residual min=-0.008074 max=0.036928 Jy/beam ! Clean residual mean=-0.000120 rms=0.002453 Jy/beam ! Combined flux in latest and established models = 0.127274 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.127274 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107569Jy sigma=0.000869 ! Fit after self-cal, rms=0.107506Jy sigma=0.000868 ! Inverting map ! Added new window around map position (-3.5, -6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0313875 Jy ! Component: 100 - total flux cleaned = 0.0457531 Jy ! Total flux subtracted in 100 components = 0.0457531 Jy ! Clean residual min=-0.006849 max=0.014872 Jy/beam ! Clean residual mean=-0.000066 rms=0.001547 Jy/beam ! Combined flux in latest and established models = 0.173027 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 35 components and 0.173027 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097116Jy sigma=0.000757 ! Fit after self-cal, rms=0.095367Jy sigma=0.000741 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0135261 Jy ! Component: 100 - total flux cleaned = 0.021334 Jy ! Total flux subtracted in 100 components = 0.021334 Jy ! Clean residual min=-0.004015 max=0.009744 Jy/beam ! Clean residual mean=-0.000040 rms=0.001112 Jy/beam ! Combined flux in latest and established models = 0.194361 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 49 components and 0.194361 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092913Jy sigma=0.000713 ! Fit after self-cal, rms=0.092638Jy sigma=0.000710 ! Inverting map ! Added new window around map position (-3.5, -11.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00965202 Jy ! Component: 100 - total flux cleaned = 0.0152837 Jy ! Total flux subtracted in 100 components = 0.0152837 Jy ! Clean residual min=-0.003398 max=0.004349 Jy/beam ! Clean residual mean=-0.000024 rms=0.000914 Jy/beam ! Combined flux in latest and established models = 0.209645 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 61 components and 0.209645 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091373Jy sigma=0.000697 ! Fit after self-cal, rms=0.091228Jy sigma=0.000696 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.063 mas, bmaj=4.947 mas, bpa=61.52 degrees ! Estimated noise=573.178 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00711196 Jy ! Component: 100 - total flux cleaned = 0.0112826 Jy ! Component: 150 - total flux cleaned = 0.0140299 Jy ! Component: 200 - total flux cleaned = 0.0159168 Jy ! Total flux subtracted in 200 components = 0.0159168 Jy ! Clean residual min=-0.002481 max=0.002604 Jy/beam ! Clean residual mean=-0.000016 rms=0.000658 Jy/beam ! Combined flux in latest and established models = 0.225561 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 92 components and 0.225561 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090679Jy sigma=0.000689 ! Fit after self-cal, rms=0.090601Jy sigma=0.000689 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.98 HN 0.95 KP 1.01 ! LA 0.99 MK 1.04 NL 0.97 OV 1.00 ! PT 0.97 SC 0.92 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.02 HN 1.03 KP 0.97 ! LA 0.92 MK 1.03 NL 1.00 OV 1.04 ! PT 0.96 SC 1.15 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.07 HN 0.97 KP 0.97 ! LA 0.96 MK 1.06 NL 0.97 OV 0.95 ! PT 0.95 SC 1.01 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.09 HN 0.94 KP 1.00* ! LA 1.04 MK 0.88 NL 1.00* OV 1.60 ! PT 1.01 SC 1.00* ! ! ! Fit before self-cal, rms=0.090601Jy sigma=0.000689 ! Fit after self-cal, rms=0.100943Jy sigma=0.000680 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.085 mas, bmaj=4.966 mas, bpa=61.12 degrees ! Estimated noise=570.796 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00060974 Jy ! Component: 100 - total flux cleaned = 0.000767622 Jy ! Component: 150 - total flux cleaned = 0.000849645 Jy ! Component: 200 - total flux cleaned = 0.000887197 Jy ! Total flux subtracted in 200 components = 0.000887197 Jy ! Clean residual min=-0.002189 max=0.002131 Jy/beam ! Clean residual mean=0.000005 rms=0.000525 Jy/beam ! Combined flux in latest and established models = 0.226449 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 105 components and 0.226449 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100868Jy sigma=0.000680 ! Fit after self-cal, rms=0.100954Jy sigma=0.000680 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100954Jy sigma=0.000680 ! Fit after self-cal, rms=0.094649Jy sigma=0.000676 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.067 mas, bmaj=4.973 mas, bpa=60.64 degrees ! Estimated noise=569.596 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00063231 Jy ! Component: 100 - total flux cleaned = 0.000668633 Jy ! Component: 150 - total flux cleaned = 0.000639369 Jy ! Component: 200 - total flux cleaned = 0.000638781 Jy ! Total flux subtracted in 200 components = 0.000638781 Jy ! Clean residual min=-0.001689 max=0.001952 Jy/beam ! Clean residual mean=0.000003 rms=0.000433 Jy/beam ! Combined flux in latest and established models = 0.227087 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 116 components and 0.227087 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094619Jy sigma=0.000676 ! Fit after self-cal, rms=0.094638Jy sigma=0.000675 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-60, -28.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0015712 Jy ! Component: 100 - total flux cleaned = 0.00190637 Jy ! Component: 150 - total flux cleaned = 0.00214383 Jy ! Component: 200 - total flux cleaned = 0.00226233 Jy ! Total flux subtracted in 200 components = 0.00226233 Jy ! Clean residual min=-0.001734 max=0.001780 Jy/beam ! Clean residual mean=0.000001 rms=0.000423 Jy/beam ! Combined flux in latest and established models = 0.22935 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 134 components and 0.22935 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094578Jy sigma=0.000675 ! Fit after self-cal, rms=0.094576Jy sigma=0.000675 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094576Jy sigma=0.000675 ! Fit after self-cal, rms=0.093597Jy sigma=0.000675 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.069 mas, bmaj=4.974 mas, bpa=60.34 degrees ! Estimated noise=568.935 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00065726 Jy ! Component: 100 - total flux cleaned = 0.000775171 Jy ! Component: 150 - total flux cleaned = 0.000800956 Jy ! Component: 200 - total flux cleaned = 0.000825345 Jy ! Total flux subtracted in 200 components = 0.000825345 Jy ! Clean residual min=-0.001751 max=0.001727 Jy/beam ! Clean residual mean=0.000001 rms=0.000419 Jy/beam ! Combined flux in latest and established models = 0.230175 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 142 components and 0.230175 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093571Jy sigma=0.000675 ! Fit after self-cal, rms=0.093571Jy sigma=0.000675 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000185762 Jy ! Component: 100 - total flux cleaned = 0.000185511 Jy ! Component: 150 - total flux cleaned = 0.000163643 Jy ! Component: 200 - total flux cleaned = 0.000163689 Jy ! Total flux subtracted in 200 components = 0.000163689 Jy ! Clean residual min=-0.001741 max=0.001720 Jy/beam ! Clean residual mean=0.000001 rms=0.000418 Jy/beam ! Combined flux in latest and established models = 0.230339 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 149 components and 0.230339 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093554Jy sigma=0.000675 ! Fit after self-cal, rms=0.093554Jy sigma=0.000675 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093554Jy sigma=0.000675 ! Fit after self-cal, rms=0.093129Jy sigma=0.000675 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.087 mas, bmaj=9.16 mas, bpa=63.21 degrees ! Estimated noise=700.43 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000373918 Jy ! Component: 100 - total flux cleaned = 0.000390977 Jy ! Component: 150 - total flux cleaned = 0.000406717 Jy ! Component: 200 - total flux cleaned = 0.000382157 Jy ! Total flux subtracted in 200 components = 0.000382157 Jy ! Clean residual min=-0.001973 max=0.001837 Jy/beam ! Clean residual mean=0.000003 rms=0.000473 Jy/beam ! Combined flux in latest and established models = 0.230721 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 174 components and 0.230721 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093124Jy sigma=0.000675 ! Fit after self-cal, rms=0.093123Jy sigma=0.000675 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.32985e-05 Jy ! Component: 100 - total flux cleaned = 0.000121782 Jy ! Component: 150 - total flux cleaned = 0.000110886 Jy ! Component: 200 - total flux cleaned = 0.000101271 Jy ! Total flux subtracted in 200 components = 0.000101271 Jy ! Clean residual min=-0.001954 max=0.001842 Jy/beam ! Clean residual mean=0.000003 rms=0.000472 Jy/beam ! Combined flux in latest and established models = 0.230822 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 184 components and 0.230822 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093118Jy sigma=0.000675 ! Fit after self-cal, rms=0.093119Jy sigma=0.000675 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.071 mas, bmaj=4.976 mas, bpa=60.13 degrees ! Estimated noise=568.665 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.071 x 4.976 at 60.13 degrees (North through East) ! Clean map min=-0.0017176 max=0.12076 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.358 mas, bmaj=4.184 mas, bpa=60.63 degrees ! Estimated noise=985.434 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.1016 Jy ! Component: 100 - total flux cleaned = 0.142488 Jy ! Component: 150 - total flux cleaned = 0.164873 Jy ! Component: 200 - total flux cleaned = 0.179608 Jy ! Total flux subtracted in 200 components = 0.179608 Jy ! Clean residual min=-0.004274 max=0.008250 Jy/beam ! Clean residual mean=-0.000050 rms=0.001131 Jy/beam ! Combined flux in latest and established models = 0.179608 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 36 model components to the UV plane model. ! The established model now contains 36 components and 0.179608 Jy ! Inverting map and beam ! Estimated beam: bmin=4.071 mas, bmaj=4.976 mas, bpa=60.13 degrees ! Estimated noise=568.665 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0153455 Jy ! Component: 100 - total flux cleaned = 0.0253515 Jy ! Component: 150 - total flux cleaned = 0.0321718 Jy ! Component: 200 - total flux cleaned = 0.0369281 Jy ! Total flux subtracted in 200 components = 0.0369281 Jy ! Clean residual min=-0.002176 max=0.002993 Jy/beam ! Clean residual mean=-0.000020 rms=0.000526 Jy/beam ! Combined flux in latest and established models = 0.216536 Jy ! Adding 62 model components to the UV plane model. ! The established model now contains 89 components and 0.216536 Jy ! Inverting map ! Added new window around map position (3, -10.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00349619 Jy ! Component: 100 - total flux cleaned = 0.0061455 Jy ! Component: 150 - total flux cleaned = 0.00826287 Jy ! Component: 200 - total flux cleaned = 0.00999046 Jy ! Total flux subtracted in 200 components = 0.00999046 Jy ! Clean residual min=-0.001823 max=0.001803 Jy/beam ! Clean residual mean=-0.000005 rms=0.000435 Jy/beam ! Combined flux in latest and established models = 0.226527 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 110 components and 0.226527 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.087 mas, bmaj=9.16 mas, bpa=63.21 degrees ! Estimated noise=700.43 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00186352 Jy ! Component: 100 - total flux cleaned = 0.00290079 Jy ! Component: 150 - total flux cleaned = 0.00334439 Jy ! Component: 200 - total flux cleaned = 0.00366266 Jy ! Total flux subtracted in 200 components = 0.00366266 Jy ! Clean residual min=-0.001870 max=0.001877 Jy/beam ! Clean residual mean=0.000001 rms=0.000472 Jy/beam ! Combined flux in latest and established models = 0.230189 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000173456 Jy ! Component: 100 - total flux cleaned = 0.000287517 Jy ! Component: 150 - total flux cleaned = 0.0003878 Jy ! Component: 200 - total flux cleaned = 0.00044719 Jy ! Total flux subtracted in 200 components = 0.00044719 Jy ! Clean residual min=-0.001875 max=0.001871 Jy/beam ! Clean residual mean=0.000002 rms=0.000467 Jy/beam ! Combined flux in latest and established models = 0.230636 Jy ! Adding 69 model components to the UV plane model. ! The established model now contains 168 components and 0.230636 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.071 mas, bmaj=4.976 mas, bpa=60.13 degrees ! Estimated noise=568.665 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00013558 Jy ! Component: 100 - total flux cleaned = -0.000171607 Jy ! Component: 150 - total flux cleaned = -0.000136546 Jy ! Component: 200 - total flux cleaned = -0.000104823 Jy ! Total flux subtracted in 200 components = -0.000104823 Jy ! Clean residual min=-0.001707 max=0.001666 Jy/beam ! Clean residual mean=0.000001 rms=0.000414 Jy/beam ! Combined flux in latest and established models = 0.230532 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 190 components and 0.230532 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093118Jy sigma=0.000675 ! Fit after self-cal, rms=0.093109Jy sigma=0.000675 wmodel J1124+6555_S_2017_03_27_pus_map.mod ! Writing 190 model components to file: J1124+6555_S_2017_03_27_pus_map.mod wobs J1124+6555_S_2017_03_27_pus_uvs.fits ! Writing UV FITS file: J1124+6555_S_2017_03_27_pus_uvs.fits wwins J1124+6555_S_2017_03_27_pus_map.win ! wwins: Wrote 5 windows to J1124+6555_S_2017_03_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -4.32515e-05 Jy ! Component: 100 - total flux cleaned = 0.000277628 Jy ! Component: 150 - total flux cleaned = 0.000613482 Jy ! Component: 200 - total flux cleaned = 0.000909405 Jy ! Component: 250 - total flux cleaned = 0.00109164 Jy ! Component: 300 - total flux cleaned = 0.0013206 Jy ! Component: 350 - total flux cleaned = 0.00146961 Jy ! Component: 400 - total flux cleaned = 0.00161542 Jy ! Component: 450 - total flux cleaned = 0.00175816 Jy ! Component: 500 - total flux cleaned = 0.00192179 Jy ! Component: 550 - total flux cleaned = 0.00199035 Jy ! Component: 600 - total flux cleaned = 0.00208157 Jy ! Component: 650 - total flux cleaned = 0.00223888 Jy ! Component: 700 - total flux cleaned = 0.0024379 Jy ! Component: 750 - total flux cleaned = 0.00265597 Jy ! Component: 800 - total flux cleaned = 0.00278527 Jy ! Component: 850 - total flux cleaned = 0.00289196 Jy ! Component: 900 - total flux cleaned = 0.00306036 Jy ! Component: 950 - total flux cleaned = 0.00318531 Jy ! Component: 1000 - total flux cleaned = 0.00330889 Jy ! Component: 1050 - total flux cleaned = 0.00345156 Jy ! Component: 1100 - total flux cleaned = 0.00359297 Jy ! Component: 1150 - total flux cleaned = 0.00379274 Jy ! Component: 1200 - total flux cleaned = 0.0038718 Jy ! Component: 1250 - total flux cleaned = 0.0040683 Jy ! Component: 1300 - total flux cleaned = 0.00416558 Jy ! Component: 1350 - total flux cleaned = 0.00430101 Jy ! Component: 1400 - total flux cleaned = 0.00447313 Jy ! Component: 1450 - total flux cleaned = 0.00458694 Jy ! Component: 1500 - total flux cleaned = 0.00477526 Jy ! Component: 1550 - total flux cleaned = 0.00486854 Jy ! Component: 1600 - total flux cleaned = 0.00501691 Jy ! Component: 1650 - total flux cleaned = 0.00510882 Jy ! Component: 1700 - total flux cleaned = 0.00523671 Jy ! Component: 1750 - total flux cleaned = 0.00532749 Jy ! Component: 1800 - total flux cleaned = 0.00543573 Jy ! Component: 1850 - total flux cleaned = 0.00554314 Jy ! Component: 1900 - total flux cleaned = 0.00561443 Jy ! Component: 1950 - total flux cleaned = 0.0057204 Jy ! Component: 2000 - total flux cleaned = 0.0058434 Jy ! Component: 2050 - total flux cleaned = 0.00596538 Jy ! Component: 2100 - total flux cleaned = 0.00601738 Jy ! Component: 2150 - total flux cleaned = 0.00617252 Jy ! Component: 2200 - total flux cleaned = 0.0062752 Jy ! Component: 2250 - total flux cleaned = 0.00639424 Jy ! Component: 2300 - total flux cleaned = 0.0064449 Jy ! Component: 2350 - total flux cleaned = 0.00652888 Jy ! Component: 2400 - total flux cleaned = 0.00657912 Jy ! Component: 2450 - total flux cleaned = 0.00669539 Jy ! Component: 2500 - total flux cleaned = 0.0068276 Jy ! Component: 2550 - total flux cleaned = 0.00694258 Jy ! Component: 2600 - total flux cleaned = 0.00697521 Jy ! Component: 2650 - total flux cleaned = 0.00704032 Jy ! Component: 2700 - total flux cleaned = 0.0071214 Jy ! Component: 2750 - total flux cleaned = 0.00728224 Jy ! Component: 2800 - total flux cleaned = 0.00731429 Jy ! Component: 2850 - total flux cleaned = 0.00739386 Jy ! Component: 2900 - total flux cleaned = 0.00755222 Jy ! Component: 2950 - total flux cleaned = 0.00753642 Jy ! Component: 3000 - total flux cleaned = 0.00767739 Jy ! Component: 3050 - total flux cleaned = 0.00783313 Jy ! Component: 3100 - total flux cleaned = 0.00789506 Jy ! Component: 3150 - total flux cleaned = 0.00792604 Jy ! Component: 3200 - total flux cleaned = 0.00807971 Jy ! Component: 3250 - total flux cleaned = 0.00821726 Jy ! Component: 3300 - total flux cleaned = 0.00829323 Jy ! Component: 3350 - total flux cleaned = 0.00839909 Jy ! Component: 3400 - total flux cleaned = 0.00847444 Jy ! Component: 3450 - total flux cleaned = 0.00857937 Jy ! Component: 3500 - total flux cleaned = 0.00866899 Jy ! Component: 3550 - total flux cleaned = 0.00871356 Jy ! Component: 3600 - total flux cleaned = 0.00884665 Jy ! Component: 3650 - total flux cleaned = 0.00886139 Jy ! Component: 3700 - total flux cleaned = 0.00896409 Jy ! Component: 3750 - total flux cleaned = 0.0090662 Jy ! Component: 3800 - total flux cleaned = 0.0092115 Jy ! Component: 3850 - total flux cleaned = 0.00926938 Jy ! Component: 3900 - total flux cleaned = 0.00937021 Jy ! Component: 3950 - total flux cleaned = 0.00939891 Jy ! Component: 4000 - total flux cleaned = 0.00952757 Jy ! Component: 4050 - total flux cleaned = 0.00955592 Jy ! Total flux subtracted in 4096 components = 0.00965517 Jy ! Clean residual min=-0.000767 max=0.000820 Jy/beam ! Clean residual mean=-0.000001 rms=0.000269 Jy/beam ! Combined flux in latest and established models = 0.240187 Jy keep ! Adding 330 model components to the UV plane model. ! The established model now contains 520 components and 0.240187 Jy ![Exited script file: muppet] wmap "J1124+6555_S_2017_03_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.071 x 4.976 at 60.13 degrees (North through East) ! Clean map min=-0.0012011 max=0.12108 Jy/beam ! Writing clean map to FITS file: J1124+6555_S_2017_03_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.121081 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000268851 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.666128 0.666128 1.33226 2.66451 5.32902 10.658 21.3161 42.6322 85.2643 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.121 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.071 x 4.976 at 60.13 degrees (North through East) ! Clean map min=-0.0012011 max=0.12108 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1124+6555_S_2017_03_27_pus_uvs.log closed on Sun Apr 28 14:39:46 2019