! Started logfile: J1124+5133_S_2017_10_09_pus_uvs.log on Sun May 12 13:10:46 2019 obs J1124+5133_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J1124+5133_S_2017_10_09_pus_uva.fits ! AN table 1: 145 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.538889 visibilities/baseline/integration-bin. ! Found source: J1124+5133 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 11252 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1124+5133_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 432 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 572 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 372 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 932 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.989029Jy sigma=0.009019 ! Fit after self-cal, rms=0.952010Jy sigma=0.008696 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.516 mas, bmaj=4.415 mas, bpa=-35.68 degrees ! Estimated noise=1428.83 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0378349 Jy ! Component: 100 - total flux cleaned = 0.0487478 Jy ! Total flux subtracted in 100 components = 0.0487478 Jy ! Clean residual min=-0.006657 max=0.006928 Jy/beam ! Clean residual mean=-0.000007 rms=0.002005 Jy/beam ! Combined flux in latest and established models = 0.0487478 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.0487478 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094645Jy sigma=0.000796 ! Fit after self-cal, rms=0.093966Jy sigma=0.000791 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.292 mas, bmaj=5.755 mas, bpa=-50.59 degrees ! Estimated noise=907.472 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00550475 Jy ! Component: 100 - total flux cleaned = 0.00550343 Jy ! Component: 150 - total flux cleaned = 0.00520413 Jy ! Component: 200 - total flux cleaned = 0.00482685 Jy ! Total flux subtracted in 200 components = 0.00482685 Jy ! Clean residual min=-0.006058 max=0.005507 Jy/beam ! Clean residual mean=-0.000009 rms=0.001885 Jy/beam ! Combined flux in latest and established models = 0.0535746 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 24 components and 0.0535746 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093204Jy sigma=0.000785 ! Fit after self-cal, rms=0.093086Jy sigma=0.000784 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 84 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 0.82 HN 0.73 KP 1.25 ! LA 1.12 MK 1.05 NL 0.99 OV 1.00* ! PT 1.24 ! ! ! Correcting IF 2. ! A total of 81 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.37 FD 0.73 HN 0.69 KP 1.16 ! LA 1.15 MK 1.06 NL 1.00* OV 1.00* ! PT 1.34 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.86 HN 0.73 KP 0.96 ! LA 0.87 MK 1.09 NL 1.15 OV 1.00* ! PT 1.16 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.57 HN 0.50 KP 1.00* ! LA 1.09 MK 1.31 NL 1.00* OV 1.00* ! PT 1.73 ! ! ! Fit before self-cal, rms=0.093086Jy sigma=0.000784 ! Fit after self-cal, rms=0.084555Jy sigma=0.000775 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.134 mas, bmaj=5.5 mas, bpa=-52.71 degrees ! Estimated noise=903.175 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00184726 Jy ! Component: 100 - total flux cleaned = 0.00207744 Jy ! Component: 150 - total flux cleaned = 0.0022249 Jy ! Component: 200 - total flux cleaned = 0.00235279 Jy ! Total flux subtracted in 200 components = 0.00235279 Jy ! Clean residual min=-0.004496 max=0.006889 Jy/beam ! Clean residual mean=0.000015 rms=0.001542 Jy/beam ! Combined flux in latest and established models = 0.0559274 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 27 components and 0.0559274 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084433Jy sigma=0.000775 ! Fit after self-cal, rms=0.085642Jy sigma=0.000771 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085642Jy sigma=0.000771 ! Fit after self-cal, rms=0.099032Jy sigma=0.000762 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.076 mas, bmaj=5.515 mas, bpa=-56.25 degrees ! Estimated noise=946.579 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00176032 Jy ! Component: 100 - total flux cleaned = 0.00265175 Jy ! Component: 150 - total flux cleaned = 0.0027569 Jy ! Component: 200 - total flux cleaned = 0.00282834 Jy ! Total flux subtracted in 200 components = 0.00282834 Jy ! Clean residual min=-0.002818 max=0.006767 Jy/beam ! Clean residual mean=0.000069 rms=0.001146 Jy/beam ! Combined flux in latest and established models = 0.0587558 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 38 components and 0.0587558 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098913Jy sigma=0.000762 ! Fit after self-cal, rms=0.099916Jy sigma=0.000760 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-30.5, 17.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00496765 Jy ! Component: 100 - total flux cleaned = 0.00530388 Jy ! Component: 150 - total flux cleaned = 0.00536947 Jy ! Component: 200 - total flux cleaned = 0.00567631 Jy ! Total flux subtracted in 200 components = 0.00567631 Jy ! Clean residual min=-0.002556 max=0.003360 Jy/beam ! Clean residual mean=0.000031 rms=0.000765 Jy/beam ! Combined flux in latest and established models = 0.0644321 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 56 components and 0.0644321 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099630Jy sigma=0.000757 ! Fit after self-cal, rms=0.099067Jy sigma=0.000755 ! Inverting map ! Added new window around map position (-102, 28.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00376313 Jy ! Component: 100 - total flux cleaned = 0.00603297 Jy ! Component: 150 - total flux cleaned = 0.00731927 Jy ! Component: 200 - total flux cleaned = 0.00822021 Jy ! Total flux subtracted in 200 components = 0.00822021 Jy ! Clean residual min=-0.002349 max=0.002831 Jy/beam ! Clean residual mean=0.000022 rms=0.000703 Jy/beam ! Combined flux in latest and established models = 0.0726523 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 75 components and 0.0726523 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098806Jy sigma=0.000754 ! Fit after self-cal, rms=0.098287Jy sigma=0.000753 ! Inverting map ! Added new window around map position (126, 102). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00300083 Jy ! Component: 100 - total flux cleaned = 0.00498883 Jy ! Component: 150 - total flux cleaned = 0.00652186 Jy ! Component: 200 - total flux cleaned = 0.00738996 Jy ! Total flux subtracted in 200 components = 0.00738996 Jy ! Clean residual min=-0.002350 max=0.002656 Jy/beam ! Clean residual mean=0.000022 rms=0.000662 Jy/beam ! Combined flux in latest and established models = 0.0800423 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 93 components and 0.0800422 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098078Jy sigma=0.000752 ! Fit after self-cal, rms=0.097704Jy sigma=0.000752 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097704Jy sigma=0.000752 ! Fit after self-cal, rms=0.094080Jy sigma=0.000752 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.04 mas, bmaj=5.535 mas, bpa=-54.53 degrees ! Estimated noise=939.449 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00191095 Jy ! Component: 100 - total flux cleaned = 0.00244709 Jy ! Component: 150 - total flux cleaned = 0.00277644 Jy ! Component: 200 - total flux cleaned = 0.00303067 Jy ! Total flux subtracted in 200 components = 0.00303067 Jy ! Clean residual min=-0.002097 max=0.002547 Jy/beam ! Clean residual mean=0.000016 rms=0.000583 Jy/beam ! Combined flux in latest and established models = 0.0830729 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 116 components and 0.0830729 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094004Jy sigma=0.000751 ! Fit after self-cal, rms=0.093680Jy sigma=0.000750 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3.5, 26). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00238508 Jy ! Component: 100 - total flux cleaned = 0.00359461 Jy ! Component: 150 - total flux cleaned = 0.00453287 Jy ! Component: 200 - total flux cleaned = 0.00535609 Jy ! Total flux subtracted in 200 components = 0.00535609 Jy ! Clean residual min=-0.001918 max=0.002229 Jy/beam ! Clean residual mean=0.000025 rms=0.000549 Jy/beam ! Combined flux in latest and established models = 0.088429 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 131 components and 0.088429 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093567Jy sigma=0.000750 ! Fit after self-cal, rms=0.093385Jy sigma=0.000750 ! Inverting map ! Added new window around map position (88, 105.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00213184 Jy ! Component: 100 - total flux cleaned = 0.00316135 Jy ! Component: 150 - total flux cleaned = 0.00391289 Jy ! Component: 200 - total flux cleaned = 0.00434107 Jy ! Total flux subtracted in 200 components = 0.00434107 Jy ! Clean residual min=-0.001858 max=0.002097 Jy/beam ! Clean residual mean=0.000023 rms=0.000523 Jy/beam ! Combined flux in latest and established models = 0.0927701 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 145 components and 0.0927701 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093284Jy sigma=0.000749 ! Fit after self-cal, rms=0.093146Jy sigma=0.000749 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093146Jy sigma=0.000749 ! Fit after self-cal, rms=0.091790Jy sigma=0.000749 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.113 mas, bmaj=10.03 mas, bpa=79.17 degrees ! Estimated noise=1225.61 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00172875 Jy ! Component: 100 - total flux cleaned = 0.00283826 Jy ! Component: 150 - total flux cleaned = 0.00355054 Jy ! Component: 200 - total flux cleaned = 0.00400162 Jy ! Total flux subtracted in 200 components = 0.00400162 Jy ! Clean residual min=-0.002215 max=0.001968 Jy/beam ! Clean residual mean=0.000037 rms=0.000627 Jy/beam ! Combined flux in latest and established models = 0.0967717 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 161 components and 0.0967717 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091735Jy sigma=0.000749 ! Fit after self-cal, rms=0.091516Jy sigma=0.000749 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00139902 Jy ! Component: 100 - total flux cleaned = 0.00221475 Jy ! Component: 150 - total flux cleaned = 0.00259537 Jy ! Component: 200 - total flux cleaned = 0.00290942 Jy ! Total flux subtracted in 200 components = 0.00290942 Jy ! Clean residual min=-0.002166 max=0.001910 Jy/beam ! Clean residual mean=0.000040 rms=0.000637 Jy/beam ! Combined flux in latest and established models = 0.0996811 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 175 components and 0.0996811 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091475Jy sigma=0.000748 ! Fit after self-cal, rms=0.091352Jy sigma=0.000748 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.044 mas, bmaj=5.54 mas, bpa=-53.8 degrees ! Estimated noise=940.457 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.044 x 5.54 at -53.8 degrees (North through East) ! Clean map min=-0.0021284 max=0.051391 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.426 mas, bmaj=4.279 mas, bpa=-38.48 degrees ! Estimated noise=1390.28 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0364549 Jy ! Component: 100 - total flux cleaned = 0.0498693 Jy ! Component: 150 - total flux cleaned = 0.0578548 Jy ! Component: 200 - total flux cleaned = 0.062128 Jy ! Total flux subtracted in 200 components = 0.062128 Jy ! Clean residual min=-0.005840 max=0.006789 Jy/beam ! Clean residual mean=-0.000007 rms=0.001410 Jy/beam ! Combined flux in latest and established models = 0.062128 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.062128 Jy ! Inverting map and beam ! Estimated beam: bmin=4.044 mas, bmaj=5.54 mas, bpa=-53.8 degrees ! Estimated noise=940.457 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00796265 Jy ! Component: 100 - total flux cleaned = 0.0139776 Jy ! Component: 150 - total flux cleaned = 0.0188316 Jy ! Component: 200 - total flux cleaned = 0.0228429 Jy ! Total flux subtracted in 200 components = 0.0228429 Jy ! Clean residual min=-0.003388 max=0.004232 Jy/beam ! Clean residual mean=0.000007 rms=0.000891 Jy/beam ! Combined flux in latest and established models = 0.0849709 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 54 components and 0.0849709 Jy ! Inverting map ! Added new window around map position (-22, -0.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00374844 Jy ! Component: 100 - total flux cleaned = 0.00626499 Jy ! Component: 150 - total flux cleaned = 0.00780746 Jy ! Component: 200 - total flux cleaned = 0.0091543 Jy ! Total flux subtracted in 200 components = 0.0091543 Jy ! Clean residual min=-0.002557 max=0.002785 Jy/beam ! Clean residual mean=0.000013 rms=0.000660 Jy/beam ! Combined flux in latest and established models = 0.0941252 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 79 components and 0.0941252 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.113 mas, bmaj=10.03 mas, bpa=79.17 degrees ! Estimated noise=1225.61 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00247944 Jy ! Component: 100 - total flux cleaned = 0.00399139 Jy ! Component: 150 - total flux cleaned = 0.00480365 Jy ! Component: 200 - total flux cleaned = 0.00557153 Jy ! Total flux subtracted in 200 components = 0.00557153 Jy ! Clean residual min=-0.001804 max=0.002277 Jy/beam ! Clean residual mean=0.000035 rms=0.000649 Jy/beam ! Combined flux in latest and established models = 0.0996967 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000632547 Jy ! Component: 100 - total flux cleaned = 0.00111591 Jy ! Component: 150 - total flux cleaned = 0.00147935 Jy ! Component: 200 - total flux cleaned = 0.00185096 Jy ! Total flux subtracted in 200 components = 0.00185096 Jy ! Clean residual min=-0.001838 max=0.002187 Jy/beam ! Clean residual mean=0.000037 rms=0.000608 Jy/beam ! Combined flux in latest and established models = 0.101548 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 119 components and 0.101548 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.044 mas, bmaj=5.54 mas, bpa=-53.8 degrees ! Estimated noise=940.457 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00174232 Jy ! Component: 100 - total flux cleaned = -0.00192988 Jy ! Component: 150 - total flux cleaned = -0.00193521 Jy ! Component: 200 - total flux cleaned = -0.00178933 Jy ! Total flux subtracted in 200 components = -0.00178933 Jy ! Clean residual min=-0.001925 max=0.002061 Jy/beam ! Clean residual mean=0.000017 rms=0.000510 Jy/beam ! Combined flux in latest and established models = 0.0997583 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 134 components and 0.0997583 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091366Jy sigma=0.000748 ! Fit after self-cal, rms=0.091188Jy sigma=0.000748 wmodel J1124+5133_S_2017_10_09_pus_map.mod ! Writing 134 model components to file: J1124+5133_S_2017_10_09_pus_map.mod wobs J1124+5133_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J1124+5133_S_2017_10_09_pus_uvs.fits wwins J1124+5133_S_2017_10_09_pus_map.win ! wwins: Wrote 7 windows to J1124+5133_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000323004 Jy ! Component: 100 - total flux cleaned = 0.000390385 Jy ! Component: 150 - total flux cleaned = 0.000421436 Jy ! Component: 200 - total flux cleaned = 0.000451451 Jy ! Component: 250 - total flux cleaned = 0.00047972 Jy ! Component: 300 - total flux cleaned = 0.000560982 Jy ! Component: 350 - total flux cleaned = 0.000614471 Jy ! Component: 400 - total flux cleaned = 0.000666766 Jy ! Component: 450 - total flux cleaned = 0.000667204 Jy ! Component: 500 - total flux cleaned = 0.000765446 Jy ! Component: 550 - total flux cleaned = 0.000814252 Jy ! Component: 600 - total flux cleaned = 0.000932741 Jy ! Component: 650 - total flux cleaned = 0.00114033 Jy ! Component: 700 - total flux cleaned = 0.00127517 Jy ! Component: 750 - total flux cleaned = 0.00138529 Jy ! Component: 800 - total flux cleaned = 0.00149393 Jy ! Component: 850 - total flux cleaned = 0.00155763 Jy ! Component: 900 - total flux cleaned = 0.00157866 Jy ! Component: 950 - total flux cleaned = 0.00166075 Jy ! Component: 1000 - total flux cleaned = 0.0017419 Jy ! Component: 1050 - total flux cleaned = 0.00188166 Jy ! Component: 1100 - total flux cleaned = 0.00194075 Jy ! Component: 1150 - total flux cleaned = 0.0020964 Jy ! Component: 1200 - total flux cleaned = 0.00221136 Jy ! Component: 1250 - total flux cleaned = 0.00224915 Jy ! Component: 1300 - total flux cleaned = 0.00234285 Jy ! Component: 1350 - total flux cleaned = 0.00236143 Jy ! Component: 1400 - total flux cleaned = 0.00239811 Jy ! Component: 1450 - total flux cleaned = 0.00245263 Jy ! Component: 1500 - total flux cleaned = 0.00245264 Jy ! Component: 1550 - total flux cleaned = 0.00250604 Jy ! Component: 1600 - total flux cleaned = 0.00248838 Jy ! Component: 1650 - total flux cleaned = 0.00254082 Jy ! Component: 1700 - total flux cleaned = 0.0024886 Jy ! Component: 1750 - total flux cleaned = 0.00250569 Jy ! Component: 1800 - total flux cleaned = 0.00247137 Jy ! Component: 1850 - total flux cleaned = 0.00247143 Jy ! Component: 1900 - total flux cleaned = 0.00245456 Jy ! Component: 1950 - total flux cleaned = 0.00245452 Jy ! Component: 2000 - total flux cleaned = 0.00247108 Jy ! Component: 2050 - total flux cleaned = 0.00247104 Jy ! Component: 2100 - total flux cleaned = 0.00247102 Jy ! Component: 2150 - total flux cleaned = 0.00247102 Jy ! Component: 2200 - total flux cleaned = 0.00248731 Jy ! Component: 2250 - total flux cleaned = 0.00251975 Jy ! Component: 2300 - total flux cleaned = 0.00250362 Jy ! Component: 2350 - total flux cleaned = 0.00251956 Jy ! Component: 2400 - total flux cleaned = 0.00250352 Jy ! Component: 2450 - total flux cleaned = 0.00248749 Jy ! Component: 2500 - total flux cleaned = 0.00245562 Jy ! Component: 2550 - total flux cleaned = 0.00242399 Jy ! Component: 2600 - total flux cleaned = 0.00242405 Jy ! Component: 2650 - total flux cleaned = 0.00240835 Jy ! Component: 2700 - total flux cleaned = 0.00245541 Jy ! Component: 2750 - total flux cleaned = 0.00237688 Jy ! Component: 2800 - total flux cleaned = 0.00234551 Jy ! Component: 2850 - total flux cleaned = 0.0023455 Jy ! Component: 2900 - total flux cleaned = 0.0023299 Jy ! Component: 2950 - total flux cleaned = 0.00232992 Jy ! Component: 3000 - total flux cleaned = 0.00228315 Jy ! Component: 3050 - total flux cleaned = 0.00225197 Jy ! Component: 3100 - total flux cleaned = 0.00220535 Jy ! Component: 3150 - total flux cleaned = 0.00222081 Jy ! Component: 3200 - total flux cleaned = 0.00215868 Jy ! Component: 3250 - total flux cleaned = 0.00215869 Jy ! Component: 3300 - total flux cleaned = 0.00214311 Jy ! Component: 3350 - total flux cleaned = 0.00211194 Jy ! Component: 3400 - total flux cleaned = 0.00212754 Jy ! Component: 3450 - total flux cleaned = 0.00211194 Jy ! Component: 3500 - total flux cleaned = 0.00209621 Jy ! Component: 3550 - total flux cleaned = 0.00208051 Jy ! Component: 3600 - total flux cleaned = 0.00204906 Jy ! Component: 3650 - total flux cleaned = 0.00203326 Jy ! Component: 3700 - total flux cleaned = 0.00200173 Jy ! Component: 3750 - total flux cleaned = 0.00195419 Jy ! Component: 3800 - total flux cleaned = 0.00190651 Jy ! Component: 3850 - total flux cleaned = 0.00195432 Jy ! Component: 3900 - total flux cleaned = 0.00192242 Jy ! Component: 3950 - total flux cleaned = 0.00192238 Jy ! Component: 4000 - total flux cleaned = 0.00193846 Jy ! Component: 4050 - total flux cleaned = 0.0018739 Jy ! Total flux subtracted in 4096 components = 0.0018576 Jy ! Clean residual min=-0.000939 max=0.000921 Jy/beam ! Clean residual mean=0.000008 rms=0.000278 Jy/beam ! Combined flux in latest and established models = 0.101616 Jy keep ! Adding 250 model components to the UV plane model. ! The established model now contains 384 components and 0.101616 Jy ![Exited script file: muppet] wmap "J1124+5133_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.044 x 5.54 at -53.8 degrees (North through East) ! Clean map min=-0.0024761 max=0.051805 Jy/beam ! Writing clean map to FITS file: J1124+5133_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0518047 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000245777 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.42329 1.42329 2.84658 5.69316 11.3863 22.7727 45.5453 91.0906 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.051 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.044 x 5.54 at -53.8 degrees (North through East) ! Clean map min=-0.0024761 max=0.051805 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1124+5133_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:10:51 2019