! Started logfile: J1123-2020_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:12:34 2019 obs J1123-2020_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J1123-2020_S_2017_01_16_pus_uva.fits ! AN table 1: 75 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.777481 visibilities/baseline/integration-bin. ! Found source: J1123-2020 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 10496 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1123-2020_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 86 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 86 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 86 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 196 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.997294Jy sigma=0.006852 ! Fit after self-cal, rms=0.938805Jy sigma=0.006507 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.178 mas, bmaj=11.57 mas, bpa=16.17 degrees ! Estimated noise=1586.79 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0527435 Jy ! Component: 100 - total flux cleaned = 0.0643968 Jy ! Total flux subtracted in 100 components = 0.0643968 Jy ! Clean residual min=-0.004476 max=0.004817 Jy/beam ! Clean residual mean=-0.000013 rms=0.001209 Jy/beam ! Combined flux in latest and established models = 0.0643968 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.0643968 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121303Jy sigma=0.000654 ! Fit after self-cal, rms=0.120274Jy sigma=0.000650 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.84 mas, bmaj=13.06 mas, bpa=14.84 degrees ! Estimated noise=1065.51 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00288028 Jy ! Component: 100 - total flux cleaned = 0.00369163 Jy ! Component: 150 - total flux cleaned = 0.00373102 Jy ! Component: 200 - total flux cleaned = 0.0037674 Jy ! Total flux subtracted in 200 components = 0.0037674 Jy ! Clean residual min=-0.002933 max=0.002746 Jy/beam ! Clean residual mean=-0.000015 rms=0.000777 Jy/beam ! Combined flux in latest and established models = 0.0681642 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 20 components and 0.0681642 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120102Jy sigma=0.000649 ! Fit after self-cal, rms=0.120134Jy sigma=0.000649 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.99 HN 1.05 KP 1.02 ! LA 0.97 MK 1.00* NL 0.91 OV 1.16 ! PT 0.98 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.97 HN 1.11 KP 1.12 ! LA 1.00 MK 1.00* NL 0.97 OV 1.06 ! PT 1.01 SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.03 HN 0.95 KP 1.06 ! LA 1.03 MK 1.00* NL 0.94 OV 1.03 ! PT 0.99 SC 1.07 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.86 FD 1.04 HN 0.93 KP 0.88 ! LA 0.54 MK 1.00* NL 1.00* OV 0.95 ! PT 0.96 SC 0.90 ! ! ! Fit before self-cal, rms=0.120134Jy sigma=0.000649 ! Fit after self-cal, rms=0.102040Jy sigma=0.000647 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.846 mas, bmaj=13.06 mas, bpa=14.92 degrees ! Estimated noise=1060.16 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00036838 Jy ! Component: 100 - total flux cleaned = -0.000369905 Jy ! Component: 150 - total flux cleaned = -0.0003449 Jy ! Component: 200 - total flux cleaned = -0.000321461 Jy ! Total flux subtracted in 200 components = -0.000321461 Jy ! Clean residual min=-0.002863 max=0.002577 Jy/beam ! Clean residual mean=-0.000008 rms=0.000686 Jy/beam ! Combined flux in latest and established models = 0.0678427 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 28 components and 0.0678427 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102027Jy sigma=0.000647 ! Fit after self-cal, rms=0.101905Jy sigma=0.000647 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101905Jy sigma=0.000647 ! Fit after self-cal, rms=0.101015Jy sigma=0.000646 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.853 mas, bmaj=13.04 mas, bpa=14.95 degrees ! Estimated noise=1059.85 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000298572 Jy ! Component: 100 - total flux cleaned = -0.000298389 Jy ! Component: 150 - total flux cleaned = -0.000298975 Jy ! Component: 200 - total flux cleaned = -0.000277506 Jy ! Total flux subtracted in 200 components = -0.000277506 Jy ! Clean residual min=-0.002748 max=0.002570 Jy/beam ! Clean residual mean=-0.000008 rms=0.000662 Jy/beam ! Combined flux in latest and established models = 0.0675652 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 37 components and 0.0675652 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101003Jy sigma=0.000646 ! Fit after self-cal, rms=0.101016Jy sigma=0.000646 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.40084e-05 Jy ! Component: 100 - total flux cleaned = 4.56545e-05 Jy ! Component: 150 - total flux cleaned = 4.64481e-05 Jy ! Component: 200 - total flux cleaned = 6.52005e-05 Jy ! Total flux subtracted in 200 components = 6.52005e-05 Jy ! Clean residual min=-0.002760 max=0.002567 Jy/beam ! Clean residual mean=-0.000008 rms=0.000665 Jy/beam ! Combined flux in latest and established models = 0.0676304 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 39 components and 0.0676304 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101008Jy sigma=0.000646 ! Fit after self-cal, rms=0.101010Jy sigma=0.000646 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101010Jy sigma=0.000646 ! Fit after self-cal, rms=0.101074Jy sigma=0.000646 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.854 mas, bmaj=13.01 mas, bpa=14.98 degrees ! Estimated noise=1059.64 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000223129 Jy ! Component: 100 - total flux cleaned = -0.000289284 Jy ! Component: 150 - total flux cleaned = -0.000289314 Jy ! Component: 200 - total flux cleaned = -0.000271067 Jy ! Total flux subtracted in 200 components = -0.000271067 Jy ! Clean residual min=-0.002675 max=0.002584 Jy/beam ! Clean residual mean=-0.000008 rms=0.000655 Jy/beam ! Combined flux in latest and established models = 0.0673593 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 42 components and 0.0673593 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101066Jy sigma=0.000646 ! Fit after self-cal, rms=0.101082Jy sigma=0.000645 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.6176e-07 Jy ! Component: 100 - total flux cleaned = 1.88717e-07 Jy ! Component: 150 - total flux cleaned = 1.65733e-05 Jy ! Component: 200 - total flux cleaned = 3.29998e-05 Jy ! Total flux subtracted in 200 components = 3.29998e-05 Jy ! Clean residual min=-0.002694 max=0.002563 Jy/beam ! Clean residual mean=-0.000008 rms=0.000656 Jy/beam ! Combined flux in latest and established models = 0.0673923 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 42 components and 0.0673923 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101077Jy sigma=0.000645 ! Fit after self-cal, rms=0.101078Jy sigma=0.000645 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101078Jy sigma=0.000645 ! Fit after self-cal, rms=0.101243Jy sigma=0.000645 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.916 mas, bmaj=18.1 mas, bpa=5.819 degrees ! Estimated noise=1242.99 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000182756 Jy ! Component: 100 - total flux cleaned = -0.000182821 Jy ! Component: 150 - total flux cleaned = -0.000170624 Jy ! Component: 200 - total flux cleaned = -0.000181624 Jy ! Total flux subtracted in 200 components = -0.000181624 Jy ! Clean residual min=-0.002591 max=0.002949 Jy/beam ! Clean residual mean=-0.000012 rms=0.000757 Jy/beam ! Combined flux in latest and established models = 0.0672107 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 49 components and 0.0672107 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101242Jy sigma=0.000645 ! Fit after self-cal, rms=0.101246Jy sigma=0.000645 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.66326e-05 Jy ! Component: 100 - total flux cleaned = 6.63497e-05 Jy ! Component: 150 - total flux cleaned = 7.55785e-05 Jy ! Component: 200 - total flux cleaned = 8.43815e-05 Jy ! Total flux subtracted in 200 components = 8.43815e-05 Jy ! Clean residual min=-0.002600 max=0.002941 Jy/beam ! Clean residual mean=-0.000012 rms=0.000755 Jy/beam ! Combined flux in latest and established models = 0.0672951 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 50 components and 0.0672951 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101246Jy sigma=0.000645 ! Fit after self-cal, rms=0.101248Jy sigma=0.000645 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.857 mas, bmaj=13 mas, bpa=15.01 degrees ! Estimated noise=1060.51 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.857 x 13 at 15.01 degrees (North through East) ! Clean map min=-0.0026055 max=0.067909 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.181 mas, bmaj=11.48 mas, bpa=16.38 degrees ! Estimated noise=1543.98 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0524633 Jy ! Component: 100 - total flux cleaned = 0.0639767 Jy ! Component: 150 - total flux cleaned = 0.065435 Jy ! Component: 200 - total flux cleaned = 0.0657131 Jy ! Total flux subtracted in 200 components = 0.0657131 Jy ! Clean residual min=-0.004257 max=0.003609 Jy/beam ! Clean residual mean=-0.000006 rms=0.000972 Jy/beam ! Combined flux in latest and established models = 0.0657131 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.0657131 Jy ! Inverting map and beam ! Estimated beam: bmin=3.857 mas, bmaj=13 mas, bpa=15.01 degrees ! Estimated noise=1060.51 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000921439 Jy ! Component: 100 - total flux cleaned = 0.00101933 Jy ! Component: 150 - total flux cleaned = 0.00106025 Jy ! Component: 200 - total flux cleaned = 0.00106034 Jy ! Total flux subtracted in 200 components = 0.00106034 Jy ! Clean residual min=-0.002867 max=0.002621 Jy/beam ! Clean residual mean=-0.000008 rms=0.000674 Jy/beam ! Combined flux in latest and established models = 0.0667734 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 36 components and 0.0667734 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.916 mas, bmaj=18.1 mas, bpa=5.819 degrees ! Estimated noise=1242.99 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000468738 Jy ! Component: 100 - total flux cleaned = 0.000490081 Jy ! Component: 150 - total flux cleaned = 0.000490507 Jy ! Component: 200 - total flux cleaned = 0.000490476 Jy ! Total flux subtracted in 200 components = 0.000490476 Jy ! Clean residual min=-0.002637 max=0.002989 Jy/beam ! Clean residual mean=-0.000012 rms=0.000758 Jy/beam ! Combined flux in latest and established models = 0.0672639 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.51138e-05 Jy ! Component: 100 - total flux cleaned = -1.49102e-05 Jy ! Component: 150 - total flux cleaned = -1.48999e-05 Jy ! Component: 200 - total flux cleaned = -2.5773e-05 Jy ! Total flux subtracted in 200 components = -2.5773e-05 Jy ! Clean residual min=-0.002628 max=0.002966 Jy/beam ! Clean residual mean=-0.000012 rms=0.000756 Jy/beam ! Combined flux in latest and established models = 0.0672381 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 45 components and 0.0672381 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.857 mas, bmaj=13 mas, bpa=15.01 degrees ! Estimated noise=1060.51 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.27114e-05 Jy ! Component: 100 - total flux cleaned = 4.65968e-05 Jy ! Component: 150 - total flux cleaned = 4.64607e-05 Jy ! Component: 200 - total flux cleaned = 7.12318e-05 Jy ! Total flux subtracted in 200 components = 7.12318e-05 Jy ! Clean residual min=-0.002692 max=0.002700 Jy/beam ! Clean residual mean=-0.000008 rms=0.000661 Jy/beam ! Combined flux in latest and established models = 0.0673093 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 55 components and 0.0673093 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101264Jy sigma=0.000646 ! Fit after self-cal, rms=0.101257Jy sigma=0.000646 wmodel J1123-2020_S_2017_01_16_pus_map.mod ! Writing 55 model components to file: J1123-2020_S_2017_01_16_pus_map.mod wobs J1123-2020_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J1123-2020_S_2017_01_16_pus_uvs.fits wwins J1123-2020_S_2017_01_16_pus_map.win ! wwins: Wrote 1 windows to J1123-2020_S_2017_01_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000442786 Jy ! Component: 100 - total flux cleaned = -0.00100605 Jy ! Component: 150 - total flux cleaned = -0.001618 Jy ! Component: 200 - total flux cleaned = -0.0020816 Jy ! Component: 250 - total flux cleaned = -0.00219212 Jy ! Component: 300 - total flux cleaned = -0.00222626 Jy ! Component: 350 - total flux cleaned = -0.00236196 Jy ! Component: 400 - total flux cleaned = -0.00246003 Jy ! Component: 450 - total flux cleaned = -0.00255542 Jy ! Component: 500 - total flux cleaned = -0.00258633 Jy ! Component: 550 - total flux cleaned = -0.00267877 Jy ! Component: 600 - total flux cleaned = -0.00285838 Jy ! Component: 650 - total flux cleaned = -0.00294632 Jy ! Component: 700 - total flux cleaned = -0.00309031 Jy ! Component: 750 - total flux cleaned = -0.00317481 Jy ! Component: 800 - total flux cleaned = -0.00334115 Jy ! Component: 850 - total flux cleaned = -0.00345006 Jy ! Component: 900 - total flux cleaned = -0.00358442 Jy ! Component: 950 - total flux cleaned = -0.00371607 Jy ! Component: 1000 - total flux cleaned = -0.00392416 Jy ! Component: 1050 - total flux cleaned = -0.00410293 Jy ! Component: 1100 - total flux cleaned = -0.00427844 Jy ! Component: 1150 - total flux cleaned = -0.00435257 Jy ! Component: 1200 - total flux cleaned = -0.00442627 Jy ! Component: 1250 - total flux cleaned = -0.00459481 Jy ! Component: 1300 - total flux cleaned = -0.00469006 Jy ! Component: 1350 - total flux cleaned = -0.00478406 Jy ! Component: 1400 - total flux cleaned = -0.00494604 Jy ! Component: 1450 - total flux cleaned = -0.00510539 Jy ! Component: 1500 - total flux cleaned = -0.00517313 Jy ! Component: 1550 - total flux cleaned = -0.00532847 Jy ! Component: 1600 - total flux cleaned = -0.00539417 Jy ! Component: 1650 - total flux cleaned = -0.00561089 Jy ! Component: 1700 - total flux cleaned = -0.00569666 Jy ! Component: 1750 - total flux cleaned = -0.00584455 Jy ! Component: 1800 - total flux cleaned = -0.00594875 Jy ! Component: 1850 - total flux cleaned = -0.00611407 Jy ! Component: 1900 - total flux cleaned = -0.00621586 Jy ! Component: 1950 - total flux cleaned = -0.00635716 Jy ! Component: 2000 - total flux cleaned = -0.0064771 Jy ! Component: 2050 - total flux cleaned = -0.00657621 Jy ! Component: 2100 - total flux cleaned = -0.00671298 Jy ! Component: 2150 - total flux cleaned = -0.00686754 Jy ! Component: 2200 - total flux cleaned = -0.00696277 Jy ! Component: 2250 - total flux cleaned = -0.00709502 Jy ! Component: 2300 - total flux cleaned = -0.00720736 Jy ! Component: 2350 - total flux cleaned = -0.00730001 Jy ! Component: 2400 - total flux cleaned = -0.00742882 Jy ! Component: 2450 - total flux cleaned = -0.00751961 Jy ! Component: 2500 - total flux cleaned = -0.00766369 Jy ! Component: 2550 - total flux cleaned = -0.00771736 Jy ! Component: 2600 - total flux cleaned = -0.00782348 Jy ! Component: 2650 - total flux cleaned = -0.00791106 Jy ! Component: 2700 - total flux cleaned = -0.00801516 Jy ! Component: 2750 - total flux cleaned = -0.00806696 Jy ! Component: 2800 - total flux cleaned = -0.00810107 Jy ! Component: 2850 - total flux cleaned = -0.00827031 Jy ! Component: 2900 - total flux cleaned = -0.00833742 Jy ! Component: 2950 - total flux cleaned = -0.00840401 Jy ! Component: 3000 - total flux cleaned = -0.00850296 Jy ! Component: 3050 - total flux cleaned = -0.00860119 Jy ! Component: 3100 - total flux cleaned = -0.00858488 Jy ! Component: 3150 - total flux cleaned = -0.00864973 Jy ! Component: 3200 - total flux cleaned = -0.00871378 Jy ! Component: 3250 - total flux cleaned = -0.00877727 Jy ! Component: 3300 - total flux cleaned = -0.00887183 Jy ! Component: 3350 - total flux cleaned = -0.00893446 Jy ! Component: 3400 - total flux cleaned = -0.00901221 Jy ! Component: 3450 - total flux cleaned = -0.00907389 Jy ! Component: 3500 - total flux cleaned = -0.00916558 Jy ! Component: 3550 - total flux cleaned = -0.00927191 Jy ! Component: 3600 - total flux cleaned = -0.00933239 Jy ! Component: 3650 - total flux cleaned = -0.00942231 Jy ! Component: 3700 - total flux cleaned = -0.00951141 Jy ! Component: 3750 - total flux cleaned = -0.00960003 Jy ! Component: 3800 - total flux cleaned = -0.00965872 Jy ! Component: 3850 - total flux cleaned = -0.00980428 Jy ! Component: 3900 - total flux cleaned = -0.00984766 Jy ! Component: 3950 - total flux cleaned = -0.00997685 Jy ! Component: 4000 - total flux cleaned = -0.010034 Jy ! Component: 4050 - total flux cleaned = -0.010133 Jy ! Total flux subtracted in 4096 components = -0.0102036 Jy ! Clean residual min=-0.000787 max=0.000780 Jy/beam ! Clean residual mean=-0.000005 rms=0.000274 Jy/beam ! Combined flux in latest and established models = 0.0571058 Jy keep ! Adding 272 model components to the UV plane model. ! The established model now contains 327 components and 0.0571058 Jy ![Exited script file: muppet] wmap "J1123-2020_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.857 x 13 at 15.01 degrees (North through East) ! Clean map min=-0.002147 max=0.067705 Jy/beam ! Writing clean map to FITS file: J1123-2020_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0677055 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000270288 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.19764 1.19764 2.39527 4.79054 9.58108 19.1622 38.3243 76.6487 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.067 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.857 x 13 at 15.01 degrees (North through East) ! Clean map min=-0.002147 max=0.067705 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1123-2020_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:12:39 2019