! Started logfile: J1121-0553_S_2017_06_15_pus_uvs.log on Tue May 7 15:17:32 2019 obs J1121-0553_S_2017_06_15_pus_uva.fits ! Reading UV FITS file: J1121-0553_S_2017_06_15_pus_uva.fits ! AN table 1: 83 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.960107 visibilities/baseline/integration-bin. ! Found source: J1121-0553 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 603 lines of history. ! ! Reading 14344 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1121-0553_S_2017_06_15_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 47 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 47 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 475 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.726893Jy sigma=0.006121 ! Fit after self-cal, rms=0.714810Jy sigma=0.006016 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.72 mas, bmaj=7.092 mas, bpa=-3.78 degrees ! Estimated noise=1037.98 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.220739 Jy ! Component: 100 - total flux cleaned = 0.284466 Jy ! Total flux subtracted in 100 components = 0.284466 Jy ! Clean residual min=-0.011168 max=0.027048 Jy/beam ! Clean residual mean=-0.000007 rms=0.003402 Jy/beam ! Combined flux in latest and established models = 0.284466 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.284466 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114124Jy sigma=0.000944 ! Fit after self-cal, rms=0.113971Jy sigma=0.000943 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0286469 Jy ! Component: 100 - total flux cleaned = 0.0430834 Jy ! Total flux subtracted in 100 components = 0.0430834 Jy ! Clean residual min=-0.009274 max=0.018717 Jy/beam ! Clean residual mean=-0.000011 rms=0.002595 Jy/beam ! Combined flux in latest and established models = 0.32755 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 25 components and 0.32755 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105971Jy sigma=0.000863 ! Fit after self-cal, rms=0.105915Jy sigma=0.000862 ! Inverting map ! Added new window around map position (9, 18). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0160237 Jy ! Component: 100 - total flux cleaned = 0.0248639 Jy ! Total flux subtracted in 100 components = 0.0248639 Jy ! Clean residual min=-0.007991 max=0.016106 Jy/beam ! Clean residual mean=-0.000009 rms=0.002256 Jy/beam ! Combined flux in latest and established models = 0.352414 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 43 components and 0.352414 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102968Jy sigma=0.000833 ! Fit after self-cal, rms=0.102662Jy sigma=0.000831 ! Inverting map ! Added new window around map position (-3, 9.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0133427 Jy ! Component: 100 - total flux cleaned = 0.020781 Jy ! Total flux subtracted in 100 components = 0.020781 Jy ! Clean residual min=-0.007069 max=0.013342 Jy/beam ! Clean residual mean=-0.000009 rms=0.001997 Jy/beam ! Combined flux in latest and established models = 0.373195 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 52 components and 0.373195 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100407Jy sigma=0.000811 ! Fit after self-cal, rms=0.100143Jy sigma=0.000809 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.227 mas, bmaj=7.983 mas, bpa=-3.548 degrees ! Estimated noise=808.87 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0102946 Jy ! Component: 100 - total flux cleaned = 0.015614 Jy ! Component: 150 - total flux cleaned = 0.0164365 Jy ! Component: 200 - total flux cleaned = 0.0171527 Jy ! Total flux subtracted in 200 components = 0.0171527 Jy ! Clean residual min=-0.006473 max=0.010305 Jy/beam ! Clean residual mean=-0.000018 rms=0.002038 Jy/beam ! Combined flux in latest and established models = 0.390347 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 67 components and 0.390347 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098809Jy sigma=0.000797 ! Fit after self-cal, rms=0.098681Jy sigma=0.000796 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.91 HN 0.99 KP 1.03 ! LA 1.00 MK 1.01 NL 0.95 OV 0.97 ! PT 1.02 SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.85 FD 0.95 HN 1.03 KP 0.99 ! LA 0.98 MK 1.01 NL 1.06 OV 1.10 ! PT 0.99 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.24 FD 0.99 HN 1.05 KP 0.99 ! LA 0.97 MK 0.99 NL 1.00 OV 0.92 ! PT 0.98 SC 1.00 ! ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 1.03 KP 1.00* ! LA 1.00 MK 1.09 NL 1.00* OV 1.00* ! PT 1.03 SC 1.00* ! ! ! Fit before self-cal, rms=0.098681Jy sigma=0.000796 ! Fit after self-cal, rms=0.099929Jy sigma=0.000742 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.22 mas, bmaj=8.059 mas, bpa=-3.436 degrees ! Estimated noise=822.615 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4, 4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00593819 Jy ! Component: 100 - total flux cleaned = 0.00584061 Jy ! Component: 150 - total flux cleaned = 0.00510639 Jy ! Component: 200 - total flux cleaned = 0.00446379 Jy ! Total flux subtracted in 200 components = 0.00446379 Jy ! Clean residual min=-0.004639 max=0.005553 Jy/beam ! Clean residual mean=-0.000014 rms=0.001273 Jy/beam ! Combined flux in latest and established models = 0.394811 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 92 components and 0.394811 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099384Jy sigma=0.000738 ! Fit after self-cal, rms=0.099453Jy sigma=0.000737 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099453Jy sigma=0.000737 ! Fit after self-cal, rms=0.100237Jy sigma=0.000714 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.22 mas, bmaj=8.069 mas, bpa=-3.32 degrees ! Estimated noise=826.168 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00138607 Jy ! Component: 100 - total flux cleaned = 0.00115698 Jy ! Component: 150 - total flux cleaned = 0.00116013 Jy ! Component: 200 - total flux cleaned = 0.00123394 Jy ! Total flux subtracted in 200 components = 0.00123394 Jy ! Clean residual min=-0.003252 max=0.003218 Jy/beam ! Clean residual mean=-0.000006 rms=0.000775 Jy/beam ! Combined flux in latest and established models = 0.396045 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 111 components and 0.396045 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099990Jy sigma=0.000712 ! Fit after self-cal, rms=0.100012Jy sigma=0.000712 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.42868e-05 Jy ! Component: 100 - total flux cleaned = 3.20271e-05 Jy ! Component: 150 - total flux cleaned = 9.06871e-05 Jy ! Component: 200 - total flux cleaned = 0.000146126 Jy ! Total flux subtracted in 200 components = 0.000146126 Jy ! Clean residual min=-0.003190 max=0.003225 Jy/beam ! Clean residual mean=-0.000006 rms=0.000746 Jy/beam ! Combined flux in latest and established models = 0.396191 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 121 components and 0.396191 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099924Jy sigma=0.000711 ! Fit after self-cal, rms=0.099917Jy sigma=0.000711 ! Inverting map ! Added new window around map position (5, 48.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00273238 Jy ! Component: 100 - total flux cleaned = 0.00365086 Jy ! Component: 150 - total flux cleaned = 0.00403241 Jy ! Component: 200 - total flux cleaned = 0.00437402 Jy ! Total flux subtracted in 200 components = 0.00437402 Jy ! Clean residual min=-0.002926 max=0.002742 Jy/beam ! Clean residual mean=-0.000006 rms=0.000697 Jy/beam ! Combined flux in latest and established models = 0.400565 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 139 components and 0.400565 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099762Jy sigma=0.000710 ! Fit after self-cal, rms=0.099758Jy sigma=0.000710 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099758Jy sigma=0.000710 ! Fit after self-cal, rms=0.101093Jy sigma=0.000707 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.215 mas, bmaj=8.072 mas, bpa=-3.358 degrees ! Estimated noise=824.771 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000394296 Jy ! Component: 100 - total flux cleaned = -0.000401026 Jy ! Component: 150 - total flux cleaned = -0.000351642 Jy ! Component: 200 - total flux cleaned = -0.000213178 Jy ! Total flux subtracted in 200 components = -0.000213178 Jy ! Clean residual min=-0.002628 max=0.002361 Jy/beam ! Clean residual mean=-0.000004 rms=0.000610 Jy/beam ! Combined flux in latest and established models = 0.400352 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 155 components and 0.400352 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101011Jy sigma=0.000707 ! Fit after self-cal, rms=0.101011Jy sigma=0.000707 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.83817e-05 Jy ! Component: 100 - total flux cleaned = 0.000158469 Jy ! Component: 150 - total flux cleaned = 0.00024112 Jy ! Component: 200 - total flux cleaned = 0.000317597 Jy ! Total flux subtracted in 200 components = 0.000317597 Jy ! Clean residual min=-0.002542 max=0.002288 Jy/beam ! Clean residual mean=-0.000004 rms=0.000596 Jy/beam ! Combined flux in latest and established models = 0.40067 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 162 components and 0.40067 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100968Jy sigma=0.000706 ! Fit after self-cal, rms=0.100963Jy sigma=0.000706 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100963Jy sigma=0.000706 ! Fit after self-cal, rms=0.101246Jy sigma=0.000706 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.461 mas, bmaj=13.82 mas, bpa=-3.676 degrees ! Estimated noise=1039.23 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000572298 Jy ! Component: 100 - total flux cleaned = -0.000413894 Jy ! Component: 150 - total flux cleaned = -0.000413133 Jy ! Component: 200 - total flux cleaned = -0.000471661 Jy ! Total flux subtracted in 200 components = -0.000471661 Jy ! Clean residual min=-0.002831 max=0.002451 Jy/beam ! Clean residual mean=-0.000008 rms=0.000699 Jy/beam ! Combined flux in latest and established models = 0.400198 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 178 components and 0.400198 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101217Jy sigma=0.000706 ! Fit after self-cal, rms=0.101216Jy sigma=0.000706 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.39786e-06 Jy ! Component: 100 - total flux cleaned = 0.000133407 Jy ! Component: 150 - total flux cleaned = 0.00013434 Jy ! Component: 200 - total flux cleaned = 0.000157229 Jy ! Total flux subtracted in 200 components = 0.000157229 Jy ! Clean residual min=-0.002813 max=0.002381 Jy/beam ! Clean residual mean=-0.000008 rms=0.000689 Jy/beam ! Combined flux in latest and established models = 0.400355 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 199 components and 0.400355 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101206Jy sigma=0.000706 ! Fit after self-cal, rms=0.101203Jy sigma=0.000706 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.215 mas, bmaj=8.077 mas, bpa=-3.344 degrees ! Estimated noise=823.935 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.215 x 8.077 at -3.344 degrees (North through East) ! Clean map min=-0.0024024 max=0.28125 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.717 mas, bmaj=7.202 mas, bpa=-3.369 degrees ! Estimated noise=1058.86 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.224594 Jy ! Component: 100 - total flux cleaned = 0.290133 Jy ! Component: 150 - total flux cleaned = 0.318658 Jy ! Component: 200 - total flux cleaned = 0.336005 Jy ! Total flux subtracted in 200 components = 0.336005 Jy ! Clean residual min=-0.006417 max=0.009597 Jy/beam ! Clean residual mean=-0.000007 rms=0.001513 Jy/beam ! Combined flux in latest and established models = 0.336005 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.336005 Jy ! Inverting map and beam ! Estimated beam: bmin=3.215 mas, bmaj=8.077 mas, bpa=-3.344 degrees ! Estimated noise=823.935 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0176196 Jy ! Component: 100 - total flux cleaned = 0.0294506 Jy ! Component: 150 - total flux cleaned = 0.0377383 Jy ! Component: 200 - total flux cleaned = 0.0437346 Jy ! Total flux subtracted in 200 components = 0.0437346 Jy ! Clean residual min=-0.003576 max=0.004966 Jy/beam ! Clean residual mean=-0.000004 rms=0.000852 Jy/beam ! Combined flux in latest and established models = 0.37974 Jy ! Adding 69 model components to the UV plane model. ! The established model now contains 91 components and 0.37974 Jy ! Inverting map ! Added new window around map position (1.5, -11). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00498361 Jy ! Component: 100 - total flux cleaned = 0.00866015 Jy ! Component: 150 - total flux cleaned = 0.0116361 Jy ! Component: 200 - total flux cleaned = 0.0140946 Jy ! Total flux subtracted in 200 components = 0.0140946 Jy ! Clean residual min=-0.003195 max=0.002329 Jy/beam ! Clean residual mean=-0.000004 rms=0.000630 Jy/beam ! Combined flux in latest and established models = 0.393834 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 125 components and 0.393834 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.461 mas, bmaj=13.82 mas, bpa=-3.676 degrees ! Estimated noise=1039.23 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00299625 Jy ! Component: 100 - total flux cleaned = 0.00491434 Jy ! Component: 150 - total flux cleaned = 0.00634494 Jy ! Component: 200 - total flux cleaned = 0.00708994 Jy ! Total flux subtracted in 200 components = 0.00708994 Jy ! Clean residual min=-0.003236 max=0.002278 Jy/beam ! Clean residual mean=-0.000008 rms=0.000690 Jy/beam ! Combined flux in latest and established models = 0.400924 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000517549 Jy ! Component: 100 - total flux cleaned = 0.000795897 Jy ! Component: 150 - total flux cleaned = 0.0010172 Jy ! Component: 200 - total flux cleaned = 0.00116394 Jy ! Total flux subtracted in 200 components = 0.00116394 Jy ! Clean residual min=-0.003095 max=0.002178 Jy/beam ! Clean residual mean=-0.000008 rms=0.000675 Jy/beam ! Combined flux in latest and established models = 0.402088 Jy ! Adding 65 model components to the UV plane model. ! The established model now contains 180 components and 0.402088 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.215 mas, bmaj=8.077 mas, bpa=-3.344 degrees ! Estimated noise=823.935 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000376972 Jy ! Component: 100 - total flux cleaned = -0.000199329 Jy ! Component: 150 - total flux cleaned = -0.000144986 Jy ! Component: 200 - total flux cleaned = 0.000103875 Jy ! Total flux subtracted in 200 components = 0.000103875 Jy ! Clean residual min=-0.002604 max=0.002083 Jy/beam ! Clean residual mean=-0.000004 rms=0.000558 Jy/beam ! Combined flux in latest and established models = 0.402192 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 207 components and 0.402192 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101146Jy sigma=0.000706 ! Fit after self-cal, rms=0.101101Jy sigma=0.000705 wmodel J1121-0553_S_2017_06_15_pus_map.mod ! Writing 207 model components to file: J1121-0553_S_2017_06_15_pus_map.mod wobs J1121-0553_S_2017_06_15_pus_uvs.fits ! Writing UV FITS file: J1121-0553_S_2017_06_15_pus_uvs.fits wwins J1121-0553_S_2017_06_15_pus_map.win ! wwins: Wrote 6 windows to J1121-0553_S_2017_06_15_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000655577 Jy ! Component: 100 - total flux cleaned = -0.000734787 Jy ! Component: 150 - total flux cleaned = -0.000623548 Jy ! Component: 200 - total flux cleaned = -0.000693721 Jy ! Component: 250 - total flux cleaned = -0.000865199 Jy ! Component: 300 - total flux cleaned = -0.000998704 Jy ! Component: 350 - total flux cleaned = -0.00109611 Jy ! Component: 400 - total flux cleaned = -0.00115915 Jy ! Component: 450 - total flux cleaned = -0.00131465 Jy ! Component: 500 - total flux cleaned = -0.00143609 Jy ! Component: 550 - total flux cleaned = -0.00158465 Jy ! Component: 600 - total flux cleaned = -0.00178854 Jy ! Component: 650 - total flux cleaned = -0.00198841 Jy ! Component: 700 - total flux cleaned = -0.0021847 Jy ! Component: 750 - total flux cleaned = -0.00235055 Jy ! Component: 800 - total flux cleaned = -0.00256749 Jy ! Component: 850 - total flux cleaned = -0.00270124 Jy ! Component: 900 - total flux cleaned = -0.00283271 Jy ! Component: 950 - total flux cleaned = -0.00293641 Jy ! Component: 1000 - total flux cleaned = -0.00314129 Jy ! Component: 1050 - total flux cleaned = -0.00319147 Jy ! Component: 1100 - total flux cleaned = -0.00339067 Jy ! Component: 1150 - total flux cleaned = -0.00346455 Jy ! Component: 1200 - total flux cleaned = -0.00368369 Jy ! Component: 1250 - total flux cleaned = -0.00385197 Jy ! Component: 1300 - total flux cleaned = -0.00399459 Jy ! Component: 1350 - total flux cleaned = -0.00432324 Jy ! Component: 1400 - total flux cleaned = -0.00446267 Jy ! Component: 1450 - total flux cleaned = -0.00464702 Jy ! Component: 1500 - total flux cleaned = -0.00480636 Jy ! Component: 1550 - total flux cleaned = -0.00498624 Jy ! Component: 1600 - total flux cleaned = -0.00511983 Jy ! Component: 1650 - total flux cleaned = -0.00531787 Jy ! Component: 1700 - total flux cleaned = -0.00540506 Jy ! Component: 1750 - total flux cleaned = -0.00559919 Jy ! Component: 1800 - total flux cleaned = -0.00570622 Jy ! Component: 1850 - total flux cleaned = -0.00587555 Jy ! Component: 1900 - total flux cleaned = -0.00598045 Jy ! Component: 1950 - total flux cleaned = -0.00610513 Jy ! Component: 2000 - total flux cleaned = -0.00620795 Jy ! Component: 2050 - total flux cleaned = -0.00624837 Jy ! Component: 2100 - total flux cleaned = -0.00626849 Jy ! Component: 2150 - total flux cleaned = -0.00630885 Jy ! Component: 2200 - total flux cleaned = -0.00624896 Jy ! Component: 2250 - total flux cleaned = -0.00640725 Jy ! Component: 2300 - total flux cleaned = -0.00634859 Jy ! Component: 2350 - total flux cleaned = -0.00648484 Jy ! Component: 2400 - total flux cleaned = -0.00652366 Jy ! Component: 2450 - total flux cleaned = -0.00648499 Jy ! Component: 2500 - total flux cleaned = -0.00657985 Jy ! Component: 2550 - total flux cleaned = -0.00646665 Jy ! Component: 2600 - total flux cleaned = -0.00657946 Jy ! Component: 2650 - total flux cleaned = -0.00663562 Jy ! Component: 2700 - total flux cleaned = -0.00661696 Jy ! Component: 2750 - total flux cleaned = -0.00667201 Jy ! Component: 2800 - total flux cleaned = -0.00661725 Jy ! Component: 2850 - total flux cleaned = -0.00667172 Jy ! Component: 2900 - total flux cleaned = -0.00676145 Jy ! Component: 2950 - total flux cleaned = -0.0067079 Jy ! Component: 3000 - total flux cleaned = -0.00677881 Jy ! Component: 3050 - total flux cleaned = -0.00676123 Jy ! Component: 3100 - total flux cleaned = -0.00672637 Jy ! Component: 3150 - total flux cleaned = -0.00679606 Jy ! Component: 3200 - total flux cleaned = -0.00681327 Jy ! Component: 3250 - total flux cleaned = -0.00686485 Jy ! Component: 3300 - total flux cleaned = -0.00683054 Jy ! Component: 3350 - total flux cleaned = -0.0068473 Jy ! Component: 3400 - total flux cleaned = -0.00677985 Jy ! Component: 3450 - total flux cleaned = -0.00679653 Jy ! Component: 3500 - total flux cleaned = -0.00681319 Jy ! Component: 3550 - total flux cleaned = -0.00687929 Jy ! Component: 3600 - total flux cleaned = -0.00687919 Jy ! Component: 3650 - total flux cleaned = -0.00696078 Jy ! Component: 3700 - total flux cleaned = -0.00692834 Jy ! Component: 3750 - total flux cleaned = -0.00694425 Jy ! Component: 3800 - total flux cleaned = -0.00697619 Jy ! Component: 3850 - total flux cleaned = -0.00707162 Jy ! Component: 3900 - total flux cleaned = -0.00705585 Jy ! Component: 3950 - total flux cleaned = -0.00704015 Jy ! Component: 4000 - total flux cleaned = -0.00708708 Jy ! Component: 4050 - total flux cleaned = -0.0070872 Jy ! Total flux subtracted in 4096 components = -0.00717976 Jy ! Clean residual min=-0.000943 max=0.000896 Jy/beam ! Clean residual mean=-0.000003 rms=0.000287 Jy/beam ! Combined flux in latest and established models = 0.395012 Jy keep ! Adding 279 model components to the UV plane model. ! The established model now contains 485 components and 0.395012 Jy ![Exited script file: muppet] wmap "J1121-0553_S_2017_06_15_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.215 x 8.077 at -3.344 degrees (North through East) ! Clean map min=-0.0019989 max=0.28331 Jy/beam ! Writing clean map to FITS file: J1121-0553_S_2017_06_15_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.283313 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000286106 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.302957 0.302957 0.605914 1.21183 2.42365 4.84731 9.69462 19.3892 38.7785 77.5569 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.283 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.215 x 8.077 at -3.344 degrees (North through East) ! Clean map min=-0.0019989 max=0.28331 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1121-0553_S_2017_06_15_pus_uvs.log closed on Tue May 7 15:17:37 2019