! Started logfile: J1121-0013_S_2017_06_15_pus_uvs.log on Tue May 7 15:17:27 2019 obs J1121-0013_S_2017_06_15_pus_uva.fits ! Reading UV FITS file: J1121-0013_S_2017_06_15_pus_uva.fits ! AN table 1: 112 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.970437 visibilities/baseline/integration-bin. ! Found source: J1121-0013 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 603 lines of history. ! ! Reading 19564 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1121-0013_S_2017_06_15_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 81 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 68 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 741 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.971493Jy sigma=0.008328 ! Fit after self-cal, rms=0.942644Jy sigma=0.008120 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.685 mas, bmaj=7.068 mas, bpa=-3.793 degrees ! Estimated noise=1059.73 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0473802 Jy ! Component: 100 - total flux cleaned = 0.0577371 Jy ! Total flux subtracted in 100 components = 0.0577371 Jy ! Clean residual min=-0.003198 max=0.003538 Jy/beam ! Clean residual mean=0.000003 rms=0.000803 Jy/beam ! Combined flux in latest and established models = 0.0577371 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.0577371 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084598Jy sigma=0.000677 ! Fit after self-cal, rms=0.084247Jy sigma=0.000674 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.212 mas, bmaj=8.047 mas, bpa=-3.164 degrees ! Estimated noise=697.477 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0040525 Jy ! Component: 100 - total flux cleaned = 0.00603283 Jy ! Component: 150 - total flux cleaned = 0.00717153 Jy ! Component: 200 - total flux cleaned = 0.00784697 Jy ! Total flux subtracted in 200 components = 0.00784697 Jy ! Clean residual min=-0.002764 max=0.002921 Jy/beam ! Clean residual mean=0.000003 rms=0.000746 Jy/beam ! Combined flux in latest and established models = 0.0655841 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 23 components and 0.0655841 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084070Jy sigma=0.000672 ! Fit after self-cal, rms=0.084082Jy sigma=0.000672 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.01 HN 0.94 KP 1.01 ! LA 0.97 MK 1.03 NL 1.11 OV 0.99 ! PT 0.95 SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.35 FD 0.98 HN 1.12 KP 0.96 ! LA 0.92 MK 1.00 NL 1.18 OV 1.35 ! PT 0.88 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.04 HN 1.15 KP 0.95 ! LA 0.98 MK 1.01 NL 0.91 OV 0.94 ! PT 0.94 SC 1.00 ! ! ! Correcting IF 4. ! A total of 18 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.06 HN 0.95 KP 1.00* ! LA 0.76 MK 0.93 NL 1.00* OV 1.00* ! PT 0.84 SC 1.00* ! ! ! Fit before self-cal, rms=0.084082Jy sigma=0.000672 ! Fit after self-cal, rms=0.085490Jy sigma=0.000669 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.233 mas, bmaj=8.108 mas, bpa=-3.002 degrees ! Estimated noise=698.307 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (6.5, -27.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00289347 Jy ! Component: 100 - total flux cleaned = 0.00440583 Jy ! Component: 150 - total flux cleaned = 0.00534081 Jy ! Component: 200 - total flux cleaned = 0.00574508 Jy ! Total flux subtracted in 200 components = 0.00574508 Jy ! Clean residual min=-0.002159 max=0.002194 Jy/beam ! Clean residual mean=-0.000003 rms=0.000548 Jy/beam ! Combined flux in latest and established models = 0.0713292 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 44 components and 0.0713292 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085389Jy sigma=0.000668 ! Fit after self-cal, rms=0.085466Jy sigma=0.000667 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085466Jy sigma=0.000667 ! Fit after self-cal, rms=0.091115Jy sigma=0.000664 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.246 mas, bmaj=8.131 mas, bpa=-2.904 degrees ! Estimated noise=701.4 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00125165 Jy ! Component: 100 - total flux cleaned = 0.00168395 Jy ! Component: 150 - total flux cleaned = 0.00181944 Jy ! Component: 200 - total flux cleaned = 0.00189011 Jy ! Total flux subtracted in 200 components = 0.00189011 Jy ! Clean residual min=-0.001748 max=0.001861 Jy/beam ! Clean residual mean=-0.000003 rms=0.000438 Jy/beam ! Combined flux in latest and established models = 0.0732193 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 52 components and 0.0732193 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091088Jy sigma=0.000663 ! Fit after self-cal, rms=0.091345Jy sigma=0.000663 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000575247 Jy ! Component: 100 - total flux cleaned = 0.000621946 Jy ! Component: 150 - total flux cleaned = 0.000686464 Jy ! Component: 200 - total flux cleaned = 0.000745087 Jy ! Total flux subtracted in 200 components = 0.000745087 Jy ! Clean residual min=-0.001745 max=0.001859 Jy/beam ! Clean residual mean=-0.000003 rms=0.000438 Jy/beam ! Combined flux in latest and established models = 0.0739644 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 57 components and 0.0739643 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091332Jy sigma=0.000663 ! Fit after self-cal, rms=0.091321Jy sigma=0.000663 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091321Jy sigma=0.000663 ! Fit after self-cal, rms=0.094635Jy sigma=0.000662 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.248 mas, bmaj=8.139 mas, bpa=-2.871 degrees ! Estimated noise=699.451 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000237153 Jy ! Component: 100 - total flux cleaned = 0.000255991 Jy ! Component: 150 - total flux cleaned = 0.000238194 Jy ! Component: 200 - total flux cleaned = 0.000206429 Jy ! Total flux subtracted in 200 components = 0.000206429 Jy ! Clean residual min=-0.001702 max=0.001722 Jy/beam ! Clean residual mean=-0.000003 rms=0.000418 Jy/beam ! Combined flux in latest and established models = 0.0741708 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 66 components and 0.0741708 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094625Jy sigma=0.000662 ! Fit after self-cal, rms=0.094684Jy sigma=0.000662 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.46247e-05 Jy ! Component: 100 - total flux cleaned = 2.85731e-05 Jy ! Component: 150 - total flux cleaned = -1.65738e-06 Jy ! Component: 200 - total flux cleaned = -1.54501e-05 Jy ! Total flux subtracted in 200 components = -1.54501e-05 Jy ! Clean residual min=-0.001747 max=0.001713 Jy/beam ! Clean residual mean=-0.000002 rms=0.000419 Jy/beam ! Combined flux in latest and established models = 0.0741553 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 71 components and 0.0741553 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094678Jy sigma=0.000662 ! Fit after self-cal, rms=0.094677Jy sigma=0.000662 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094677Jy sigma=0.000662 ! Fit after self-cal, rms=0.095530Jy sigma=0.000662 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.544 mas, bmaj=13.39 mas, bpa=-5.034 degrees ! Estimated noise=862.618 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.62796e-05 Jy ! Component: 100 - total flux cleaned = 8.50493e-05 Jy ! Component: 150 - total flux cleaned = 8.44371e-05 Jy ! Component: 200 - total flux cleaned = 8.43361e-05 Jy ! Total flux subtracted in 200 components = 8.43361e-05 Jy ! Clean residual min=-0.001827 max=0.002223 Jy/beam ! Clean residual mean=-0.000005 rms=0.000542 Jy/beam ! Combined flux in latest and established models = 0.0742397 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 83 components and 0.0742397 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095527Jy sigma=0.000662 ! Fit after self-cal, rms=0.095541Jy sigma=0.000662 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.40429e-05 Jy ! Component: 100 - total flux cleaned = 2.51758e-05 Jy ! Component: 150 - total flux cleaned = 2.5019e-05 Jy ! Component: 200 - total flux cleaned = 2.50113e-05 Jy ! Total flux subtracted in 200 components = 2.50113e-05 Jy ! Clean residual min=-0.001821 max=0.002210 Jy/beam ! Clean residual mean=-0.000005 rms=0.000541 Jy/beam ! Combined flux in latest and established models = 0.0742647 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 91 components and 0.0742647 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095540Jy sigma=0.000662 ! Fit after self-cal, rms=0.095539Jy sigma=0.000662 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.252 mas, bmaj=8.149 mas, bpa=-2.853 degrees ! Estimated noise=699.925 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.252 x 8.149 at -2.853 degrees (North through East) ! Clean map min=-0.0017283 max=0.060788 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.701 mas, bmaj=7.102 mas, bpa=-3.456 degrees ! Estimated noise=1069.11 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0475911 Jy ! Component: 100 - total flux cleaned = 0.0580706 Jy ! Component: 150 - total flux cleaned = 0.0621604 Jy ! Component: 200 - total flux cleaned = 0.0650559 Jy ! Total flux subtracted in 200 components = 0.0650559 Jy ! Clean residual min=-0.002763 max=0.002599 Jy/beam ! Clean residual mean=-0.000000 rms=0.000621 Jy/beam ! Combined flux in latest and established models = 0.0650559 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.0650559 Jy ! Inverting map and beam ! Estimated beam: bmin=3.252 mas, bmaj=8.149 mas, bpa=-2.853 degrees ! Estimated noise=699.925 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.5, -8.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0029786 Jy ! Component: 100 - total flux cleaned = 0.00495225 Jy ! Component: 150 - total flux cleaned = 0.00644796 Jy ! Component: 200 - total flux cleaned = 0.00722446 Jy ! Total flux subtracted in 200 components = 0.00722446 Jy ! Clean residual min=-0.001769 max=0.001707 Jy/beam ! Clean residual mean=-0.000001 rms=0.000439 Jy/beam ! Combined flux in latest and established models = 0.0722803 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 45 components and 0.0722803 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.544 mas, bmaj=13.39 mas, bpa=-5.034 degrees ! Estimated noise=862.618 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00111824 Jy ! Component: 100 - total flux cleaned = 0.00175567 Jy ! Component: 150 - total flux cleaned = 0.00187719 Jy ! Component: 200 - total flux cleaned = 0.001998 Jy ! Total flux subtracted in 200 components = 0.001998 Jy ! Clean residual min=-0.001822 max=0.002147 Jy/beam ! Clean residual mean=-0.000005 rms=0.000539 Jy/beam ! Combined flux in latest and established models = 0.0742783 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.67114e-05 Jy ! Component: 100 - total flux cleaned = 0.00014643 Jy ! Component: 150 - total flux cleaned = 0.000197829 Jy ! Component: 200 - total flux cleaned = 0.000245705 Jy ! Total flux subtracted in 200 components = 0.000245705 Jy ! Clean residual min=-0.001822 max=0.002135 Jy/beam ! Clean residual mean=-0.000005 rms=0.000535 Jy/beam ! Combined flux in latest and established models = 0.0745241 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 94 components and 0.074524 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.252 mas, bmaj=8.149 mas, bpa=-2.853 degrees ! Estimated noise=699.925 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.65256e-05 Jy ! Component: 100 - total flux cleaned = -0.000172573 Jy ! Component: 150 - total flux cleaned = -0.000224631 Jy ! Component: 200 - total flux cleaned = -0.00022473 Jy ! Total flux subtracted in 200 components = -0.00022473 Jy ! Clean residual min=-0.001744 max=0.001751 Jy/beam ! Clean residual mean=-0.000002 rms=0.000418 Jy/beam ! Combined flux in latest and established models = 0.0742993 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 113 components and 0.0742993 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095542Jy sigma=0.000662 ! Fit after self-cal, rms=0.095536Jy sigma=0.000662 wmodel J1121-0013_S_2017_06_15_pus_map.mod ! Writing 113 model components to file: J1121-0013_S_2017_06_15_pus_map.mod wobs J1121-0013_S_2017_06_15_pus_uvs.fits ! Writing UV FITS file: J1121-0013_S_2017_06_15_pus_uvs.fits wwins J1121-0013_S_2017_06_15_pus_map.win ! wwins: Wrote 3 windows to J1121-0013_S_2017_06_15_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000134477 Jy ! Component: 100 - total flux cleaned = -0.00025167 Jy ! Component: 150 - total flux cleaned = -0.000416085 Jy ! Component: 200 - total flux cleaned = -0.000495364 Jy ! Component: 250 - total flux cleaned = -0.000571527 Jy ! Component: 300 - total flux cleaned = -0.000646067 Jy ! Component: 350 - total flux cleaned = -0.000718822 Jy ! Component: 400 - total flux cleaned = -0.000859816 Jy ! Component: 450 - total flux cleaned = -0.000951234 Jy ! Component: 500 - total flux cleaned = -0.000883486 Jy ! Component: 550 - total flux cleaned = -0.000883436 Jy ! Component: 600 - total flux cleaned = -0.000796418 Jy ! Component: 650 - total flux cleaned = -0.000753894 Jy ! Component: 700 - total flux cleaned = -0.000732752 Jy ! Component: 750 - total flux cleaned = -0.000753698 Jy ! Component: 800 - total flux cleaned = -0.000712283 Jy ! Component: 850 - total flux cleaned = -0.000550554 Jy ! Component: 900 - total flux cleaned = -0.000471101 Jy ! Component: 950 - total flux cleaned = -0.000372793 Jy ! Component: 1000 - total flux cleaned = -0.000353386 Jy ! Component: 1050 - total flux cleaned = -0.000295293 Jy ! Component: 1100 - total flux cleaned = -0.000162353 Jy ! Component: 1150 - total flux cleaned = -6.81777e-05 Jy ! Component: 1200 - total flux cleaned = -4.93228e-05 Jy ! Component: 1250 - total flux cleaned = 9.77938e-05 Jy ! Component: 1300 - total flux cleaned = 0.000207209 Jy ! Component: 1350 - total flux cleaned = 0.000297366 Jy ! Component: 1400 - total flux cleaned = 0.000386806 Jy ! Component: 1450 - total flux cleaned = 0.000475274 Jy ! Component: 1500 - total flux cleaned = 0.000510468 Jy ! Component: 1550 - total flux cleaned = 0.000597333 Jy ! Component: 1600 - total flux cleaned = 0.000648836 Jy ! Component: 1650 - total flux cleaned = 0.000751126 Jy ! Component: 1700 - total flux cleaned = 0.000818845 Jy ! Component: 1750 - total flux cleaned = 0.000852367 Jy ! Component: 1800 - total flux cleaned = 0.000968299 Jy ! Component: 1850 - total flux cleaned = 0.000951907 Jy ! Component: 1900 - total flux cleaned = 0.00103343 Jy ! Component: 1950 - total flux cleaned = 0.00104978 Jy ! Component: 2000 - total flux cleaned = 0.00111399 Jy ! Component: 2050 - total flux cleaned = 0.00120948 Jy ! Component: 2100 - total flux cleaned = 0.00119365 Jy ! Component: 2150 - total flux cleaned = 0.00125619 Jy ! Component: 2200 - total flux cleaned = 0.00133388 Jy ! Component: 2250 - total flux cleaned = 0.00127217 Jy ! Component: 2300 - total flux cleaned = 0.00134888 Jy ! Component: 2350 - total flux cleaned = 0.00134887 Jy ! Component: 2400 - total flux cleaned = 0.00143943 Jy ! Component: 2450 - total flux cleaned = 0.00140943 Jy ! Component: 2500 - total flux cleaned = 0.0014837 Jy ! Component: 2550 - total flux cleaned = 0.00145431 Jy ! Component: 2600 - total flux cleaned = 0.00154249 Jy ! Component: 2650 - total flux cleaned = 0.00154262 Jy ! Component: 2700 - total flux cleaned = 0.00157161 Jy ! Component: 2750 - total flux cleaned = 0.00157143 Jy ! Component: 2800 - total flux cleaned = 0.00167143 Jy ! Component: 2850 - total flux cleaned = 0.00172816 Jy ! Component: 2900 - total flux cleaned = 0.00167187 Jy ! Component: 2950 - total flux cleaned = 0.00169974 Jy ! Component: 3000 - total flux cleaned = 0.00179706 Jy ! Component: 3050 - total flux cleaned = 0.00183845 Jy ! Component: 3100 - total flux cleaned = 0.001811 Jy ! Component: 3150 - total flux cleaned = 0.00185179 Jy ! Component: 3200 - total flux cleaned = 0.00179756 Jy ! Component: 3250 - total flux cleaned = 0.0018514 Jy ! Component: 3300 - total flux cleaned = 0.00179787 Jy ! Component: 3350 - total flux cleaned = 0.00174481 Jy ! Component: 3400 - total flux cleaned = 0.00179785 Jy ! Component: 3450 - total flux cleaned = 0.00183744 Jy ! Component: 3500 - total flux cleaned = 0.00185036 Jy ! Component: 3550 - total flux cleaned = 0.00182449 Jy ! Component: 3600 - total flux cleaned = 0.00187615 Jy ! Component: 3650 - total flux cleaned = 0.00183774 Jy ! Component: 3700 - total flux cleaned = 0.00186334 Jy ! Component: 3750 - total flux cleaned = 0.00187599 Jy ! Component: 3800 - total flux cleaned = 0.00188843 Jy ! Component: 3850 - total flux cleaned = 0.0018884 Jy ! Component: 3900 - total flux cleaned = 0.00188842 Jy ! Component: 3950 - total flux cleaned = 0.00187593 Jy ! Component: 4000 - total flux cleaned = 0.00196242 Jy ! Component: 4050 - total flux cleaned = 0.00195023 Jy ! Total flux subtracted in 4096 components = 0.00197476 Jy ! Clean residual min=-0.000772 max=0.000769 Jy/beam ! Clean residual mean=-0.000001 rms=0.000233 Jy/beam ! Combined flux in latest and established models = 0.0762741 Jy keep ! Adding 281 model components to the UV plane model. ! The established model now contains 394 components and 0.0762741 Jy ![Exited script file: muppet] wmap "J1121-0013_S_2017_06_15_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.252 x 8.149 at -2.853 degrees (North through East) ! Clean map min=-0.0016664 max=0.060576 Jy/beam ! Writing clean map to FITS file: J1121-0013_S_2017_06_15_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0605757 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000232972 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.15379 1.15379 2.30758 4.61516 9.23032 18.4606 36.9213 73.8426 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.06 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.252 x 8.149 at -2.853 degrees (North through East) ! Clean map min=-0.0016664 max=0.060576 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1121-0013_S_2017_06_15_pus_uvs.log closed on Tue May 7 15:17:32 2019