! Started logfile: J1120-2508_S_2017_09_26_pus_uvs.log on Sat May 11 13:00:30 2019 obs J1120-2508_S_2017_09_26_pus_uva.fits ! Reading UV FITS file: J1120-2508_S_2017_09_26_pus_uva.fits ! AN table 1: 296 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.660567 visibilities/baseline/integration-bin. ! Found source: J1120-2508 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 674 lines of history. ! ! Reading 28156 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1120-2508_S_2017_09_26_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 601 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 752 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 752 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 2290 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.908989Jy sigma=0.006002 ! Fit after self-cal, rms=0.853380Jy sigma=0.005596 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.67 mas, bmaj=14.27 mas, bpa=-19.56 degrees ! Estimated noise=1321.12 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.117368 Jy ! Component: 100 - total flux cleaned = 0.18423 Jy ! Total flux subtracted in 100 components = 0.18423 Jy ! Clean residual min=-0.029248 max=0.042259 Jy/beam ! Clean residual mean=-0.000701 rms=0.013312 Jy/beam ! Combined flux in latest and established models = 0.18423 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 39 components and 0.18423 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.236286Jy sigma=0.001733 ! Fit after self-cal, rms=0.235191Jy sigma=0.001728 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.685 mas, bmaj=17.7 mas, bpa=-16.5 degrees ! Estimated noise=817.968 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0892732 Jy ! Component: 100 - total flux cleaned = 0.141538 Jy ! Component: 150 - total flux cleaned = 0.174976 Jy ! Component: 200 - total flux cleaned = 0.197347 Jy ! Total flux subtracted in 200 components = 0.197347 Jy ! Clean residual min=-0.047853 max=0.070091 Jy/beam ! Clean residual mean=-0.001029 rms=0.024964 Jy/beam ! Combined flux in latest and established models = 0.381577 Jy ! Performing phase self-cal ! Adding 86 model components to the UV plane model. ! The established model now contains 117 components and 0.381576 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.203084Jy sigma=0.001462 ! Fit after self-cal, rms=0.201086Jy sigma=0.001453 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.30 FD 1.00* HN 0.98 KP 1.13 ! LA 0.73 MK 0.97 NL 1.61 OV 1.47 ! PT 0.82 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.93 KP 1.20 ! LA 0.74 MK 1.00 NL 1.77 OV 1.68 ! PT 0.72 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.89 KP 1.30 ! LA 0.81 MK 1.11 NL 1.69 OV 1.49 ! PT 0.61 ! ! ! Correcting IF 4. ! A total of 318 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.96 KP 1.00* ! LA 1.00* MK 0.88 NL 1.00* OV 4.80 ! PT 0.49 ! ! ! Fit before self-cal, rms=0.201086Jy sigma=0.001453 ! Fit after self-cal, rms=0.270660Jy sigma=0.001338 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.716 mas, bmaj=18.27 mas, bpa=-16.46 degrees ! Estimated noise=884.041 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00775781 Jy ! Component: 100 - total flux cleaned = 0.00776812 Jy ! Component: 150 - total flux cleaned = 0.00730876 Jy ! Component: 200 - total flux cleaned = 0.00710012 Jy ! Total flux subtracted in 200 components = 0.00710012 Jy ! Clean residual min=-0.053707 max=0.080071 Jy/beam ! Clean residual mean=0.000100 rms=0.021063 Jy/beam ! Combined flux in latest and established models = 0.388677 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 131 components and 0.388677 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.268900Jy sigma=0.001340 ! Fit after self-cal, rms=0.274943Jy sigma=0.001319 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.274943Jy sigma=0.001319 ! Fit after self-cal, rms=0.356366Jy sigma=0.001306 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.723 mas, bmaj=18.31 mas, bpa=-16.14 degrees ! Estimated noise=950.827 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0156327 Jy ! Component: 100 - total flux cleaned = 0.0180157 Jy ! Component: 150 - total flux cleaned = 0.0186329 Jy ! Component: 200 - total flux cleaned = 0.0186395 Jy ! Total flux subtracted in 200 components = 0.0186395 Jy ! Clean residual min=-0.051022 max=0.077855 Jy/beam ! Clean residual mean=0.000129 rms=0.020927 Jy/beam ! Combined flux in latest and established models = 0.407316 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 152 components and 0.407316 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.352679Jy sigma=0.001309 ! Fit after self-cal, rms=0.354198Jy sigma=0.001306 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000580591 Jy ! Component: 100 - total flux cleaned = -0.00039939 Jy ! Component: 150 - total flux cleaned = -0.00113618 Jy ! Component: 200 - total flux cleaned = -0.00134709 Jy ! Total flux subtracted in 200 components = -0.00134709 Jy ! Clean residual min=-0.051268 max=0.076794 Jy/beam ! Clean residual mean=0.000106 rms=0.020798 Jy/beam ! Combined flux in latest and established models = 0.405969 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 157 components and 0.405969 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.352857Jy sigma=0.001307 ! Fit after self-cal, rms=0.353092Jy sigma=0.001305 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.353092Jy sigma=0.001305 ! Fit after self-cal, rms=0.386330Jy sigma=0.001298 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.758 mas, bmaj=18.88 mas, bpa=-16.42 degrees ! Estimated noise=1005.82 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00967607 Jy ! Component: 100 - total flux cleaned = 0.0121353 Jy ! Component: 150 - total flux cleaned = 0.0141002 Jy ! Component: 200 - total flux cleaned = 0.0146578 Jy ! Total flux subtracted in 200 components = 0.0146578 Jy ! Clean residual min=-0.051707 max=0.082039 Jy/beam ! Clean residual mean=0.000051 rms=0.021796 Jy/beam ! Combined flux in latest and established models = 0.420627 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 167 components and 0.420627 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.383312Jy sigma=0.001299 ! Fit after self-cal, rms=0.383652Jy sigma=0.001297 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00105875 Jy ! Component: 100 - total flux cleaned = 8.46398e-05 Jy ! Component: 150 - total flux cleaned = -0.000193634 Jy ! Component: 200 - total flux cleaned = -0.000408647 Jy ! Total flux subtracted in 200 components = -0.000408647 Jy ! Clean residual min=-0.052218 max=0.081244 Jy/beam ! Clean residual mean=0.000040 rms=0.021726 Jy/beam ! Combined flux in latest and established models = 0.420218 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 167 components and 0.420218 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.382324Jy sigma=0.001298 ! Fit after self-cal, rms=0.382456Jy sigma=0.001296 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.382456Jy sigma=0.001296 ! Fit after self-cal, rms=0.415047Jy sigma=0.001292 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.587 mas, bmaj=34.74 mas, bpa=-6.62 degrees ! Estimated noise=1143.92 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0171986 Jy ! Component: 100 - total flux cleaned = 0.0208751 Jy ! Component: 150 - total flux cleaned = 0.0219864 Jy ! Component: 200 - total flux cleaned = 0.0224374 Jy ! Total flux subtracted in 200 components = 0.0224374 Jy ! Clean residual min=-0.076575 max=0.123752 Jy/beam ! Clean residual mean=0.000119 rms=0.034190 Jy/beam ! Combined flux in latest and established models = 0.442656 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 172 components and 0.442656 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.411996Jy sigma=0.001292 ! Fit after self-cal, rms=0.411687Jy sigma=0.001288 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00115536 Jy ! Component: 100 - total flux cleaned = -0.000155359 Jy ! Component: 150 - total flux cleaned = 0.000266434 Jy ! Component: 200 - total flux cleaned = 0.000636235 Jy ! Total flux subtracted in 200 components = 0.000636235 Jy ! Clean residual min=-0.077222 max=0.122180 Jy/beam ! Clean residual mean=0.000109 rms=0.033926 Jy/beam ! Combined flux in latest and established models = 0.443292 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 173 components and 0.443292 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.410794Jy sigma=0.001290 ! Fit after self-cal, rms=0.410712Jy sigma=0.001287 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.775 mas, bmaj=19.85 mas, bpa=-16.78 degrees ! Estimated noise=1060.17 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.775 x 19.85 at -16.78 degrees (North through East) ! Clean map min=-0.053142 max=0.16264 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.662 mas, bmaj=15.53 mas, bpa=-19.12 degrees ! Estimated noise=1846.65 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.152836 Jy ! Component: 100 - total flux cleaned = 0.243795 Jy ! Component: 150 - total flux cleaned = 0.305117 Jy ! Component: 200 - total flux cleaned = 0.348216 Jy ! Total flux subtracted in 200 components = 0.348216 Jy ! Clean residual min=-0.037139 max=0.044364 Jy/beam ! Clean residual mean=-0.000217 rms=0.013426 Jy/beam ! Combined flux in latest and established models = 0.348216 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 66 model components to the UV plane model. ! The established model now contains 66 components and 0.348216 Jy ! Inverting map and beam ! Estimated beam: bmin=3.775 mas, bmaj=19.85 mas, bpa=-16.78 degrees ! Estimated noise=1060.17 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0496873 Jy ! Component: 100 - total flux cleaned = 0.0643609 Jy ! Component: 150 - total flux cleaned = 0.0707187 Jy ! Component: 200 - total flux cleaned = 0.0757744 Jy ! Total flux subtracted in 200 components = 0.0757744 Jy ! Clean residual min=-0.053923 max=0.080060 Jy/beam ! Clean residual mean=-0.000064 rms=0.022716 Jy/beam ! Combined flux in latest and established models = 0.42399 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 82 components and 0.42399 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.587 mas, bmaj=34.74 mas, bpa=-6.62 degrees ! Estimated noise=1143.92 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0194456 Jy ! Component: 100 - total flux cleaned = 0.0221589 Jy ! Component: 150 - total flux cleaned = 0.0226755 Jy ! Component: 200 - total flux cleaned = 0.0231342 Jy ! Total flux subtracted in 200 components = 0.0231342 Jy ! Clean residual min=-0.077573 max=0.121536 Jy/beam ! Clean residual mean=0.000142 rms=0.033829 Jy/beam ! Combined flux in latest and established models = 0.447124 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.20116e-05 Jy ! Component: 100 - total flux cleaned = -3.61e-05 Jy ! Component: 150 - total flux cleaned = -0.000423161 Jy ! Component: 200 - total flux cleaned = -0.000794547 Jy ! Total flux subtracted in 200 components = -0.000794547 Jy ! Clean residual min=-0.077171 max=0.120928 Jy/beam ! Clean residual mean=0.000130 rms=0.033768 Jy/beam ! Combined flux in latest and established models = 0.44633 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 109 components and 0.44633 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.775 mas, bmaj=19.85 mas, bpa=-16.78 degrees ! Estimated noise=1060.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00451947 Jy ! Component: 100 - total flux cleaned = -0.00660583 Jy ! Component: 150 - total flux cleaned = -0.00855932 Jy ! Component: 200 - total flux cleaned = -0.00889471 Jy ! Total flux subtracted in 200 components = -0.00889471 Jy ! Clean residual min=-0.052712 max=0.079583 Jy/beam ! Clean residual mean=0.000046 rms=0.022397 Jy/beam ! Combined flux in latest and established models = 0.437435 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 123 components and 0.437435 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.412247Jy sigma=0.001288 ! Fit after self-cal, rms=0.412662Jy sigma=0.001286 wmodel J1120-2508_S_2017_09_26_pus_map.mod ! Writing 123 model components to file: J1120-2508_S_2017_09_26_pus_map.mod wobs J1120-2508_S_2017_09_26_pus_uvs.fits ! Writing UV FITS file: J1120-2508_S_2017_09_26_pus_uvs.fits wwins J1120-2508_S_2017_09_26_pus_map.win ! wwins: Wrote 1 windows to J1120-2508_S_2017_09_26_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0342194 Jy ! Component: 100 - total flux cleaned = 0.0620953 Jy ! Component: 150 - total flux cleaned = 0.0867377 Jy ! Component: 200 - total flux cleaned = 0.107858 Jy ! Component: 250 - total flux cleaned = 0.121816 Jy ! Component: 300 - total flux cleaned = 0.136029 Jy ! Component: 350 - total flux cleaned = 0.148086 Jy ! Component: 400 - total flux cleaned = 0.158928 Jy ! Component: 450 - total flux cleaned = 0.170866 Jy ! Component: 500 - total flux cleaned = 0.180231 Jy ! Component: 550 - total flux cleaned = 0.189989 Jy ! Component: 600 - total flux cleaned = 0.196746 Jy ! Component: 650 - total flux cleaned = 0.205282 Jy ! Component: 700 - total flux cleaned = 0.212276 Jy ! Component: 750 - total flux cleaned = 0.220341 Jy ! Component: 800 - total flux cleaned = 0.227607 Jy ! Component: 850 - total flux cleaned = 0.235281 Jy ! Component: 900 - total flux cleaned = 0.243359 Jy ! Component: 950 - total flux cleaned = 0.249572 Jy ! Component: 1000 - total flux cleaned = 0.255098 Jy ! Component: 1050 - total flux cleaned = 0.258891 Jy ! Component: 1100 - total flux cleaned = 0.264729 Jy ! Component: 1150 - total flux cleaned = 0.269404 Jy ! Component: 1200 - total flux cleaned = 0.2735 Jy ! Component: 1250 - total flux cleaned = 0.279504 Jy ! Component: 1300 - total flux cleaned = 0.282946 Jy ! Component: 1350 - total flux cleaned = 0.28681 Jy ! Component: 1400 - total flux cleaned = 0.290124 Jy ! Component: 1450 - total flux cleaned = 0.294771 Jy ! Component: 1500 - total flux cleaned = 0.297512 Jy ! Component: 1550 - total flux cleaned = 0.301557 Jy ! Component: 1600 - total flux cleaned = 0.304647 Jy ! Component: 1650 - total flux cleaned = 0.307688 Jy ! Component: 1700 - total flux cleaned = 0.309396 Jy ! Component: 1750 - total flux cleaned = 0.312344 Jy ! Component: 1800 - total flux cleaned = 0.314832 Jy ! Component: 1850 - total flux cleaned = 0.317284 Jy ! Component: 1900 - total flux cleaned = 0.319294 Jy ! Component: 1950 - total flux cleaned = 0.320882 Jy ! Component: 2000 - total flux cleaned = 0.323225 Jy ! Component: 2050 - total flux cleaned = 0.325914 Jy ! Component: 2100 - total flux cleaned = 0.326292 Jy ! Component: 2150 - total flux cleaned = 0.328536 Jy ! Component: 2200 - total flux cleaned = 0.330007 Jy ! Component: 2250 - total flux cleaned = 0.330736 Jy ! Component: 2300 - total flux cleaned = 0.332526 Jy ! Component: 2350 - total flux cleaned = 0.334637 Jy ! Component: 2400 - total flux cleaned = 0.336372 Jy ! Component: 2450 - total flux cleaned = 0.338094 Jy ! Component: 2500 - total flux cleaned = 0.339453 Jy ! Component: 2550 - total flux cleaned = 0.341468 Jy ! Component: 2600 - total flux cleaned = 0.343783 Jy ! Component: 2650 - total flux cleaned = 0.346067 Jy ! Component: 2700 - total flux cleaned = 0.347353 Jy ! Component: 2750 - total flux cleaned = 0.349263 Jy ! Component: 2800 - total flux cleaned = 0.350836 Jy ! Component: 2850 - total flux cleaned = 0.353012 Jy ! Component: 2900 - total flux cleaned = 0.354549 Jy ! Component: 2950 - total flux cleaned = 0.35607 Jy ! Component: 3000 - total flux cleaned = 0.357573 Jy ! Component: 3050 - total flux cleaned = 0.359647 Jy ! Component: 3100 - total flux cleaned = 0.360815 Jy ! Component: 3150 - total flux cleaned = 0.362268 Jy ! Component: 3200 - total flux cleaned = 0.363994 Jy ! Component: 3250 - total flux cleaned = 0.365416 Jy ! Component: 3300 - total flux cleaned = 0.366542 Jy ! Component: 3350 - total flux cleaned = 0.367931 Jy ! Component: 3400 - total flux cleaned = 0.369034 Jy ! Component: 3450 - total flux cleaned = 0.370399 Jy ! Component: 3500 - total flux cleaned = 0.370939 Jy ! Component: 3550 - total flux cleaned = 0.372545 Jy ! Component: 3600 - total flux cleaned = 0.374132 Jy ! Component: 3650 - total flux cleaned = 0.374655 Jy ! Component: 3700 - total flux cleaned = 0.376214 Jy ! Component: 3750 - total flux cleaned = 0.378015 Jy ! Component: 3800 - total flux cleaned = 0.379798 Jy ! Component: 3850 - total flux cleaned = 0.380808 Jy ! Component: 3900 - total flux cleaned = 0.382563 Jy ! Component: 3950 - total flux cleaned = 0.383558 Jy ! Component: 4000 - total flux cleaned = 0.38578 Jy ! Component: 4050 - total flux cleaned = 0.386761 Jy ! Total flux subtracted in 4096 components = 0.388222 Jy ! Clean residual min=-0.013140 max=0.013528 Jy/beam ! Clean residual mean=-0.000093 rms=0.005727 Jy/beam ! Combined flux in latest and established models = 0.825657 Jy keep ! Adding 853 model components to the UV plane model. ! The established model now contains 976 components and 0.825657 Jy ![Exited script file: muppet] wmap "J1120-2508_S_2017_09_26_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.775 x 19.85 at -16.78 degrees (North through East) ! Clean map min=-0.038957 max=0.18189 Jy/beam ! Writing clean map to FITS file: J1120-2508_S_2017_09_26_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.181887 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00554885 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -9.15212 9.15212 18.3042 36.6085 73.217 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0166 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.181 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.775 x 19.85 at -16.78 degrees (North through East) ! Clean map min=-0.038957 max=0.18189 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1120-2508_S_2017_09_26_pus_uvs.log closed on Sat May 11 13:00:37 2019