! Started logfile: J1120-2508_S_2017_01_21_pus_uvs.log on Sun May 5 15:53:33 2019 obs J1120-2508_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J1120-2508_S_2017_01_21_pus_uva.fits ! AN table 1: 145 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.764751 visibilities/baseline/integration-bin. ! Found source: J1120-2508 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 15968 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1120-2508_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 156 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 156 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 156 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 448 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.948975Jy sigma=0.005762 ! Fit after self-cal, rms=0.885317Jy sigma=0.005331 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.111 mas, bmaj=6.415 mas, bpa=-6.604 degrees ! Estimated noise=1608.75 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0797569 Jy ! Component: 100 - total flux cleaned = 0.123541 Jy ! Total flux subtracted in 100 components = 0.123541 Jy ! Clean residual min=-0.019527 max=0.034086 Jy/beam ! Clean residual mean=-0.000229 rms=0.007715 Jy/beam ! Combined flux in latest and established models = 0.123541 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 38 components and 0.123541 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.223675Jy sigma=0.001467 ! Fit after self-cal, rms=0.222971Jy sigma=0.001464 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.693 mas, bmaj=7.127 mas, bpa=-5.424 degrees ! Estimated noise=999.3 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0855312 Jy ! Component: 100 - total flux cleaned = 0.138894 Jy ! Component: 150 - total flux cleaned = 0.172799 Jy ! Component: 200 - total flux cleaned = 0.19435 Jy ! Total flux subtracted in 200 components = 0.19435 Jy ! Clean residual min=-0.044352 max=0.056660 Jy/beam ! Clean residual mean=-0.001009 rms=0.019459 Jy/beam ! Combined flux in latest and established models = 0.317891 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 57 components and 0.317891 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.190990Jy sigma=0.001196 ! Fit after self-cal, rms=0.188749Jy sigma=0.001184 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 1.00* HN 2.59 LA 0.69 ! MK 1.37 NL 2.85 OV 1.24 PT 0.64 ! SC 1.50 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.25 FD 1.00* HN 2.30 LA 0.63 ! MK 1.28 NL 2.74 OV 1.43 PT 0.65 ! SC 1.33 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.21 FD 1.00* HN 2.14 LA 0.62 ! MK 1.56 NL 2.52 OV 1.64 PT 0.64 ! SC 1.48 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.53 FD 1.00* HN 2.10 LA 0.54 ! MK 1.19 NL 1.00* OV 2.41 PT 0.68 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.188749Jy sigma=0.001184 ! Fit after self-cal, rms=0.392347Jy sigma=0.000869 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.047 mas, bmaj=7.683 mas, bpa=-5.079 degrees ! Estimated noise=1277.33 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.010024 Jy ! Component: 100 - total flux cleaned = 0.0109804 Jy ! Component: 150 - total flux cleaned = 0.0114112 Jy ! Component: 200 - total flux cleaned = 0.0119941 Jy ! Total flux subtracted in 200 components = 0.0119941 Jy ! Clean residual min=-0.027714 max=0.041329 Jy/beam ! Clean residual mean=0.000212 rms=0.010459 Jy/beam ! Combined flux in latest and established models = 0.329885 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 62 components and 0.329885 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.390784Jy sigma=0.000871 ! Fit after self-cal, rms=0.405899Jy sigma=0.000854 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.405899Jy sigma=0.000854 ! Fit after self-cal, rms=0.554910Jy sigma=0.000814 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.981 mas, bmaj=7.715 mas, bpa=-5.163 degrees ! Estimated noise=1410.69 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.021598 Jy ! Component: 100 - total flux cleaned = 0.0319484 Jy ! Component: 150 - total flux cleaned = 0.036161 Jy ! Component: 200 - total flux cleaned = 0.036953 Jy ! Total flux subtracted in 200 components = 0.036953 Jy ! Clean residual min=-0.023713 max=0.030405 Jy/beam ! Clean residual mean=0.000359 rms=0.009139 Jy/beam ! Combined flux in latest and established models = 0.366838 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 71 components and 0.366838 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.552424Jy sigma=0.000812 ! Fit after self-cal, rms=0.555081Jy sigma=0.000811 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000854007 Jy ! Component: 100 - total flux cleaned = 0.00135034 Jy ! Component: 150 - total flux cleaned = 0.00149918 Jy ! Component: 200 - total flux cleaned = 0.00164243 Jy ! Total flux subtracted in 200 components = 0.00164243 Jy ! Clean residual min=-0.024178 max=0.029579 Jy/beam ! Clean residual mean=0.000339 rms=0.009057 Jy/beam ! Combined flux in latest and established models = 0.36848 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 72 components and 0.36848 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.554744Jy sigma=0.000811 ! Fit after self-cal, rms=0.554798Jy sigma=0.000811 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.554798Jy sigma=0.000811 ! Fit after self-cal, rms=0.734461Jy sigma=0.000771 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.916 mas, bmaj=7.689 mas, bpa=-4.252 degrees ! Estimated noise=1392.36 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00675716 Jy ! Component: 100 - total flux cleaned = 0.00796507 Jy ! Component: 150 - total flux cleaned = 0.00858734 Jy ! Component: 200 - total flux cleaned = 0.00902248 Jy ! Total flux subtracted in 200 components = 0.00902248 Jy ! Clean residual min=-0.019044 max=0.026986 Jy/beam ! Clean residual mean=0.000192 rms=0.007092 Jy/beam ! Combined flux in latest and established models = 0.377503 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 72 components and 0.377503 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.733936Jy sigma=0.000772 ! Fit after self-cal, rms=0.734945Jy sigma=0.000771 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000332209 Jy ! Component: 100 - total flux cleaned = 8.57085e-05 Jy ! Component: 150 - total flux cleaned = 8.55189e-05 Jy ! Component: 200 - total flux cleaned = 9.10093e-05 Jy ! Total flux subtracted in 200 components = 9.10093e-05 Jy ! Clean residual min=-0.019165 max=0.026463 Jy/beam ! Clean residual mean=0.000183 rms=0.007051 Jy/beam ! Combined flux in latest and established models = 0.377594 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 73 components and 0.377594 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.734705Jy sigma=0.000771 ! Fit after self-cal, rms=0.734852Jy sigma=0.000771 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.734852Jy sigma=0.000771 ! Fit after self-cal, rms=0.757305Jy sigma=0.000770 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.379 mas, bmaj=20.59 mas, bpa=2.02 degrees ! Estimated noise=1628.39 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00930096 Jy ! Component: 100 - total flux cleaned = 0.00982507 Jy ! Component: 150 - total flux cleaned = 0.0100573 Jy ! Component: 200 - total flux cleaned = 0.0102629 Jy ! Total flux subtracted in 200 components = 0.0102629 Jy ! Clean residual min=-0.035886 max=0.048087 Jy/beam ! Clean residual mean=0.000417 rms=0.014181 Jy/beam ! Combined flux in latest and established models = 0.387857 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 74 components and 0.387857 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.756617Jy sigma=0.000772 ! Fit after self-cal, rms=0.757143Jy sigma=0.000770 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00108595 Jy ! Component: 100 - total flux cleaned = -0.000807646 Jy ! Component: 150 - total flux cleaned = -0.000562604 Jy ! Component: 200 - total flux cleaned = -0.000353908 Jy ! Total flux subtracted in 200 components = -0.000353908 Jy ! Clean residual min=-0.035765 max=0.047700 Jy/beam ! Clean residual mean=0.000401 rms=0.014112 Jy/beam ! Combined flux in latest and established models = 0.387503 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 74 components and 0.387503 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.756744Jy sigma=0.000772 ! Fit after self-cal, rms=0.757297Jy sigma=0.000770 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.908 mas, bmaj=7.689 mas, bpa=-4.025 degrees ! Estimated noise=1414.7 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.908 x 7.689 at -4.025 degrees (North through East) ! Clean map min=-0.018705 max=0.14738 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.211 mas, bmaj=6.584 mas, bpa=-4.825 degrees ! Estimated noise=2627.71 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.126582 Jy ! Component: 100 - total flux cleaned = 0.202015 Jy ! Component: 150 - total flux cleaned = 0.252521 Jy ! Component: 200 - total flux cleaned = 0.287443 Jy ! Total flux subtracted in 200 components = 0.287443 Jy ! Clean residual min=-0.024935 max=0.024978 Jy/beam ! Clean residual mean=-0.000086 rms=0.006549 Jy/beam ! Combined flux in latest and established models = 0.287443 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 35 model components to the UV plane model. ! The established model now contains 35 components and 0.287443 Jy ! Inverting map and beam ! Estimated beam: bmin=2.908 mas, bmaj=7.689 mas, bpa=-4.025 degrees ! Estimated noise=1414.7 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0446121 Jy ! Component: 100 - total flux cleaned = 0.0677155 Jy ! Component: 150 - total flux cleaned = 0.0800149 Jy ! Component: 200 - total flux cleaned = 0.0834182 Jy ! Total flux subtracted in 200 components = 0.0834182 Jy ! Clean residual min=-0.022271 max=0.026313 Jy/beam ! Clean residual mean=0.000069 rms=0.007392 Jy/beam ! Combined flux in latest and established models = 0.370861 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 54 components and 0.370861 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.379 mas, bmaj=20.59 mas, bpa=2.02 degrees ! Estimated noise=1628.39 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.010998 Jy ! Component: 100 - total flux cleaned = 0.011573 Jy ! Component: 150 - total flux cleaned = 0.0118355 Jy ! Component: 200 - total flux cleaned = 0.0120738 Jy ! Total flux subtracted in 200 components = 0.0120738 Jy ! Clean residual min=-0.036988 max=0.047699 Jy/beam ! Clean residual mean=0.000326 rms=0.014198 Jy/beam ! Combined flux in latest and established models = 0.382935 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000402392 Jy ! Component: 100 - total flux cleaned = 0.000596065 Jy ! Component: 150 - total flux cleaned = 0.000764434 Jy ! Component: 200 - total flux cleaned = 0.000930379 Jy ! Total flux subtracted in 200 components = 0.000930379 Jy ! Clean residual min=-0.036547 max=0.047183 Jy/beam ! Clean residual mean=0.000339 rms=0.014175 Jy/beam ! Combined flux in latest and established models = 0.383865 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 61 components and 0.383865 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.908 mas, bmaj=7.689 mas, bpa=-4.025 degrees ! Estimated noise=1414.7 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00327578 Jy ! Component: 100 - total flux cleaned = -0.00409833 Jy ! Component: 150 - total flux cleaned = -0.00457058 Jy ! Component: 200 - total flux cleaned = -0.00469937 Jy ! Total flux subtracted in 200 components = -0.00469937 Jy ! Clean residual min=-0.020631 max=0.025797 Jy/beam ! Clean residual mean=0.000124 rms=0.007212 Jy/beam ! Combined flux in latest and established models = 0.379166 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 68 components and 0.379166 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.756889Jy sigma=0.000773 ! Fit after self-cal, rms=0.757261Jy sigma=0.000771 wmodel J1120-2508_S_2017_01_21_pus_map.mod ! Writing 68 model components to file: J1120-2508_S_2017_01_21_pus_map.mod wobs J1120-2508_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J1120-2508_S_2017_01_21_pus_uvs.fits wwins J1120-2508_S_2017_01_21_pus_map.win ! wwins: Wrote 1 windows to J1120-2508_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0117186 Jy ! Component: 100 - total flux cleaned = 0.0219435 Jy ! Component: 150 - total flux cleaned = 0.0306534 Jy ! Component: 200 - total flux cleaned = 0.0374491 Jy ! Component: 250 - total flux cleaned = 0.042218 Jy ! Component: 300 - total flux cleaned = 0.0461438 Jy ! Component: 350 - total flux cleaned = 0.0499323 Jy ! Component: 400 - total flux cleaned = 0.0529841 Jy ! Component: 450 - total flux cleaned = 0.0547574 Jy ! Component: 500 - total flux cleaned = 0.0561924 Jy ! Component: 550 - total flux cleaned = 0.0581463 Jy ! Component: 600 - total flux cleaned = 0.0595031 Jy ! Component: 650 - total flux cleaned = 0.0608249 Jy ! Component: 700 - total flux cleaned = 0.0610825 Jy ! Component: 750 - total flux cleaned = 0.0615829 Jy ! Component: 800 - total flux cleaned = 0.0623199 Jy ! Component: 850 - total flux cleaned = 0.0623112 Jy ! Component: 900 - total flux cleaned = 0.0625484 Jy ! Component: 950 - total flux cleaned = 0.0630172 Jy ! Component: 1000 - total flux cleaned = 0.0641651 Jy ! Component: 1050 - total flux cleaned = 0.0646133 Jy ! Component: 1100 - total flux cleaned = 0.0652807 Jy ! Component: 1150 - total flux cleaned = 0.0659364 Jy ! Component: 1200 - total flux cleaned = 0.067007 Jy ! Component: 1250 - total flux cleaned = 0.067223 Jy ! Component: 1300 - total flux cleaned = 0.0680573 Jy ! Component: 1350 - total flux cleaned = 0.0692848 Jy ! Component: 1400 - total flux cleaned = 0.069891 Jy ! Component: 1450 - total flux cleaned = 0.0708846 Jy ! Component: 1500 - total flux cleaned = 0.0712748 Jy ! Component: 1550 - total flux cleaned = 0.0724347 Jy ! Component: 1600 - total flux cleaned = 0.0731933 Jy ! Component: 1650 - total flux cleaned = 0.0739432 Jy ! Component: 1700 - total flux cleaned = 0.0750518 Jy ! Component: 1750 - total flux cleaned = 0.0757798 Jy ! Component: 1800 - total flux cleaned = 0.0763199 Jy ! Component: 1850 - total flux cleaned = 0.0768563 Jy ! Component: 1900 - total flux cleaned = 0.0779104 Jy ! Component: 1950 - total flux cleaned = 0.0784311 Jy ! Component: 2000 - total flux cleaned = 0.0786051 Jy ! Component: 2050 - total flux cleaned = 0.0791145 Jy ! Component: 2100 - total flux cleaned = 0.0799518 Jy ! Component: 2150 - total flux cleaned = 0.0804466 Jy ! Component: 2200 - total flux cleaned = 0.0811003 Jy ! Component: 2250 - total flux cleaned = 0.0817459 Jy ! Component: 2300 - total flux cleaned = 0.0823829 Jy ! Component: 2350 - total flux cleaned = 0.0830131 Jy ! Component: 2400 - total flux cleaned = 0.0834804 Jy ! Component: 2450 - total flux cleaned = 0.0837884 Jy ! Component: 2500 - total flux cleaned = 0.0843985 Jy ! Component: 2550 - total flux cleaned = 0.0847009 Jy ! Component: 2600 - total flux cleaned = 0.0855975 Jy ! Component: 2650 - total flux cleaned = 0.0858941 Jy ! Component: 2700 - total flux cleaned = 0.0860419 Jy ! Component: 2750 - total flux cleaned = 0.0866244 Jy ! Component: 2800 - total flux cleaned = 0.08691 Jy ! Component: 2850 - total flux cleaned = 0.0873357 Jy ! Component: 2900 - total flux cleaned = 0.0874764 Jy ! Component: 2950 - total flux cleaned = 0.0881758 Jy ! Component: 3000 - total flux cleaned = 0.0883138 Jy ! Component: 3050 - total flux cleaned = 0.0891358 Jy ! Component: 3100 - total flux cleaned = 0.08927 Jy ! Component: 3150 - total flux cleaned = 0.0894053 Jy ! Component: 3200 - total flux cleaned = 0.0899434 Jy ! Component: 3250 - total flux cleaned = 0.0908763 Jy ! Component: 3300 - total flux cleaned = 0.0908765 Jy ! Component: 3350 - total flux cleaned = 0.0916659 Jy ! Component: 3400 - total flux cleaned = 0.0924504 Jy ! Component: 3450 - total flux cleaned = 0.0928403 Jy ! Component: 3500 - total flux cleaned = 0.0932277 Jy ! Component: 3550 - total flux cleaned = 0.0938699 Jy ! Component: 3600 - total flux cleaned = 0.0939965 Jy ! Component: 3650 - total flux cleaned = 0.0943773 Jy ! Component: 3700 - total flux cleaned = 0.0947557 Jy ! Component: 3750 - total flux cleaned = 0.0950064 Jy ! Component: 3800 - total flux cleaned = 0.0955055 Jy ! Component: 3850 - total flux cleaned = 0.0962522 Jy ! Component: 3900 - total flux cleaned = 0.0972435 Jy ! Component: 3950 - total flux cleaned = 0.0982314 Jy ! Component: 4000 - total flux cleaned = 0.0988474 Jy ! Component: 4050 - total flux cleaned = 0.0997072 Jy ! Total flux subtracted in 4096 components = 0.100564 Jy ! Clean residual min=-0.006412 max=0.009075 Jy/beam ! Clean residual mean=0.000018 rms=0.002820 Jy/beam ! Combined flux in latest and established models = 0.47973 Jy keep ! Adding 497 model components to the UV plane model. ! The established model now contains 565 components and 0.47973 Jy ![Exited script file: muppet] wmap "J1120-2508_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.908 x 7.689 at -4.025 degrees (North through East) ! Clean map min=-0.015644 max=0.16267 Jy/beam ! Writing clean map to FITS file: J1120-2508_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.162669 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00278132 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -5.12941 5.12941 10.2588 20.5177 41.0353 82.0706 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0083 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.162 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.908 x 7.689 at -4.025 degrees (North through East) ! Clean map min=-0.015644 max=0.16267 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1120-2508_S_2017_01_21_pus_uvs.log closed on Sun May 5 15:53:38 2019