! Started logfile: J1120+5404_S_2017_07_09_pus_uvs.log on Wed May 8 14:47:37 2019 obs J1120+5404_S_2017_07_09_pus_uva.fits ! Reading UV FITS file: J1120+5404_S_2017_07_09_pus_uva.fits ! AN table 1: 114 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.971735 visibilities/baseline/integration-bin. ! Found source: J1120+5404 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 19940 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1120+5404_S_2017_07_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 590 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.935794Jy sigma=0.009023 ! Fit after self-cal, rms=0.928504Jy sigma=0.008957 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.284 mas, bmaj=4.269 mas, bpa=19.04 degrees ! Estimated noise=979.158 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0581898 Jy ! Component: 100 - total flux cleaned = 0.0709232 Jy ! Total flux subtracted in 100 components = 0.0709232 Jy ! Clean residual min=-0.003344 max=0.003923 Jy/beam ! Clean residual mean=-0.000002 rms=0.000823 Jy/beam ! Combined flux in latest and established models = 0.0709232 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0709232 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073861Jy sigma=0.000684 ! Fit after self-cal, rms=0.073812Jy sigma=0.000683 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.861 mas, bmaj=5.024 mas, bpa=20.78 degrees ! Estimated noise=585.386 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0038958 Jy ! Component: 100 - total flux cleaned = 0.00569822 Jy ! Component: 150 - total flux cleaned = 0.0063087 Jy ! Component: 200 - total flux cleaned = 0.00644775 Jy ! Total flux subtracted in 200 components = 0.00644775 Jy ! Clean residual min=-0.002292 max=0.002426 Jy/beam ! Clean residual mean=0.000020 rms=0.000550 Jy/beam ! Combined flux in latest and established models = 0.0773709 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 17 components and 0.0773709 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073630Jy sigma=0.000682 ! Fit after self-cal, rms=0.073628Jy sigma=0.000681 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.97 HN 1.20 KP 1.01 ! LA 1.06 MK 1.05 NL 0.93 OV 1.05 ! PT 1.00 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.96 HN 1.01 KP 1.05 ! LA 1.19 MK 0.98 NL 1.02 OV 1.03 ! PT 0.96 SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 0.97 HN 0.99 KP 0.98 ! LA 0.97 MK 1.00 NL 0.99 OV 0.96 ! PT 0.93 SC 0.96 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.95 HN 0.93 KP 1.00* ! LA 1.01 MK 0.95 NL 1.00* OV 1.00* ! PT 0.95 SC 1.00* ! ! ! Fit before self-cal, rms=0.073628Jy sigma=0.000681 ! Fit after self-cal, rms=0.073471Jy sigma=0.000678 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.867 mas, bmaj=5.028 mas, bpa=21.17 degrees ! Estimated noise=581.407 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000373275 Jy ! Component: 100 - total flux cleaned = -0.000447288 Jy ! Component: 150 - total flux cleaned = -0.000463205 Jy ! Component: 200 - total flux cleaned = -0.000477838 Jy ! Total flux subtracted in 200 components = -0.000477838 Jy ! Clean residual min=-0.002153 max=0.002193 Jy/beam ! Clean residual mean=0.000019 rms=0.000492 Jy/beam ! Combined flux in latest and established models = 0.0768931 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 23 components and 0.0768931 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073460Jy sigma=0.000678 ! Fit after self-cal, rms=0.073485Jy sigma=0.000678 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073485Jy sigma=0.000678 ! Fit after self-cal, rms=0.077320Jy sigma=0.000674 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.866 mas, bmaj=5.005 mas, bpa=21.4 degrees ! Estimated noise=584.821 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000622848 Jy ! Component: 100 - total flux cleaned = 0.000610187 Jy ! Component: 150 - total flux cleaned = 0.000600428 Jy ! Component: 200 - total flux cleaned = 0.00058421 Jy ! Total flux subtracted in 200 components = 0.00058421 Jy ! Clean residual min=-0.001736 max=0.001992 Jy/beam ! Clean residual mean=0.000010 rms=0.000402 Jy/beam ! Combined flux in latest and established models = 0.0774773 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 38 components and 0.0774773 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077316Jy sigma=0.000674 ! Fit after self-cal, rms=0.077458Jy sigma=0.000674 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-83.5, 15.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00141451 Jy ! Component: 100 - total flux cleaned = 0.00152869 Jy ! Component: 150 - total flux cleaned = 0.00161145 Jy ! Component: 200 - total flux cleaned = 0.00170363 Jy ! Total flux subtracted in 200 components = 0.00170363 Jy ! Clean residual min=-0.001660 max=0.001672 Jy/beam ! Clean residual mean=0.000006 rms=0.000384 Jy/beam ! Combined flux in latest and established models = 0.0791809 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 54 components and 0.0791809 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077413Jy sigma=0.000673 ! Fit after self-cal, rms=0.077390Jy sigma=0.000673 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077390Jy sigma=0.000673 ! Fit after self-cal, rms=0.080894Jy sigma=0.000672 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.868 mas, bmaj=5.001 mas, bpa=20.82 degrees ! Estimated noise=583.606 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000531335 Jy ! Component: 100 - total flux cleaned = 0.000726539 Jy ! Component: 150 - total flux cleaned = 0.000781574 Jy ! Component: 200 - total flux cleaned = 0.000798814 Jy ! Total flux subtracted in 200 components = 0.000798814 Jy ! Clean residual min=-0.001497 max=0.001487 Jy/beam ! Clean residual mean=0.000007 rms=0.000358 Jy/beam ! Combined flux in latest and established models = 0.0799797 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 67 components and 0.0799797 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080881Jy sigma=0.000672 ! Fit after self-cal, rms=0.080935Jy sigma=0.000672 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.27854e-05 Jy ! Component: 100 - total flux cleaned = 5.73706e-05 Jy ! Component: 150 - total flux cleaned = 5.75938e-05 Jy ! Component: 200 - total flux cleaned = 3.01571e-05 Jy ! Total flux subtracted in 200 components = 3.01571e-05 Jy ! Clean residual min=-0.001507 max=0.001496 Jy/beam ! Clean residual mean=0.000007 rms=0.000356 Jy/beam ! Combined flux in latest and established models = 0.0800099 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 75 components and 0.0800099 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080929Jy sigma=0.000672 ! Fit after self-cal, rms=0.080928Jy sigma=0.000672 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080928Jy sigma=0.000672 ! Fit after self-cal, rms=0.081361Jy sigma=0.000672 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.845 mas, bmaj=8.998 mas, bpa=29.54 degrees ! Estimated noise=728.407 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00022108 Jy ! Component: 100 - total flux cleaned = 0.000253464 Jy ! Component: 150 - total flux cleaned = 0.000291301 Jy ! Component: 200 - total flux cleaned = 0.000301391 Jy ! Total flux subtracted in 200 components = 0.000301391 Jy ! Clean residual min=-0.001440 max=0.001597 Jy/beam ! Clean residual mean=0.000015 rms=0.000423 Jy/beam ! Combined flux in latest and established models = 0.0803113 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 93 components and 0.0803113 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081360Jy sigma=0.000672 ! Fit after self-cal, rms=0.081363Jy sigma=0.000672 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.23087e-06 Jy ! Component: 100 - total flux cleaned = -2.49473e-05 Jy ! Component: 150 - total flux cleaned = -1.57562e-05 Jy ! Component: 200 - total flux cleaned = -7.31937e-06 Jy ! Total flux subtracted in 200 components = -7.31937e-06 Jy ! Clean residual min=-0.001443 max=0.001581 Jy/beam ! Clean residual mean=0.000016 rms=0.000423 Jy/beam ! Combined flux in latest and established models = 0.080304 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 96 components and 0.080304 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081363Jy sigma=0.000672 ! Fit after self-cal, rms=0.081361Jy sigma=0.000672 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.87 mas, bmaj=4.999 mas, bpa=20.62 degrees ! Estimated noise=583.857 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.87 x 4.999 at 20.62 degrees (North through East) ! Clean map min=-0.0014004 max=0.073966 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.284 mas, bmaj=4.253 mas, bpa=19.32 degrees ! Estimated noise=974.084 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0578235 Jy ! Component: 100 - total flux cleaned = 0.0704963 Jy ! Component: 150 - total flux cleaned = 0.0747646 Jy ! Component: 200 - total flux cleaned = 0.0764956 Jy ! Total flux subtracted in 200 components = 0.0764956 Jy ! Clean residual min=-0.002582 max=0.003067 Jy/beam ! Clean residual mean=0.000001 rms=0.000643 Jy/beam ! Combined flux in latest and established models = 0.0764956 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.0764956 Jy ! Inverting map and beam ! Estimated beam: bmin=3.87 mas, bmaj=4.999 mas, bpa=20.62 degrees ! Estimated noise=583.857 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.5, -1.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0018615 Jy ! Component: 100 - total flux cleaned = 0.0025712 Jy ! Component: 150 - total flux cleaned = 0.0029699 Jy ! Component: 200 - total flux cleaned = 0.00319508 Jy ! Total flux subtracted in 200 components = 0.00319508 Jy ! Clean residual min=-0.001506 max=0.001566 Jy/beam ! Clean residual mean=0.000008 rms=0.000366 Jy/beam ! Combined flux in latest and established models = 0.0796907 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 41 components and 0.0796907 Jy ! Inverting map ! Added new window around map position (-90.5, 29). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00111935 Jy ! Component: 100 - total flux cleaned = 0.00141084 Jy ! Component: 150 - total flux cleaned = 0.00155338 Jy ! Component: 200 - total flux cleaned = 0.00173794 Jy ! Total flux subtracted in 200 components = 0.00173794 Jy ! Clean residual min=-0.001502 max=0.001484 Jy/beam ! Clean residual mean=0.000005 rms=0.000346 Jy/beam ! Combined flux in latest and established models = 0.0814286 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 61 components and 0.0814286 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.845 mas, bmaj=8.998 mas, bpa=29.54 degrees ! Estimated noise=728.407 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.77418e-05 Jy ! Component: 100 - total flux cleaned = 0.000120444 Jy ! Component: 150 - total flux cleaned = 0.000182782 Jy ! Component: 200 - total flux cleaned = 0.000265201 Jy ! Total flux subtracted in 200 components = 0.000265201 Jy ! Clean residual min=-0.001427 max=0.001475 Jy/beam ! Clean residual mean=0.000013 rms=0.000397 Jy/beam ! Combined flux in latest and established models = 0.0816938 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.47093e-05 Jy ! Component: 100 - total flux cleaned = 4.75614e-05 Jy ! Component: 150 - total flux cleaned = 5.84964e-05 Jy ! Component: 200 - total flux cleaned = 8.88949e-05 Jy ! Total flux subtracted in 200 components = 8.88949e-05 Jy ! Clean residual min=-0.001435 max=0.001473 Jy/beam ! Clean residual mean=0.000013 rms=0.000394 Jy/beam ! Combined flux in latest and established models = 0.0817827 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 102 components and 0.0817827 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.87 mas, bmaj=4.999 mas, bpa=20.62 degrees ! Estimated noise=583.857 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000179693 Jy ! Component: 100 - total flux cleaned = 0.000199833 Jy ! Component: 150 - total flux cleaned = 0.000237155 Jy ! Component: 200 - total flux cleaned = 0.000254957 Jy ! Total flux subtracted in 200 components = 0.000254957 Jy ! Clean residual min=-0.001450 max=0.001479 Jy/beam ! Clean residual mean=0.000005 rms=0.000338 Jy/beam ! Combined flux in latest and established models = 0.0820377 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 121 components and 0.0820377 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081338Jy sigma=0.000672 ! Fit after self-cal, rms=0.081332Jy sigma=0.000672 wmodel J1120+5404_S_2017_07_09_pus_map.mod ! Writing 121 model components to file: J1120+5404_S_2017_07_09_pus_map.mod wobs J1120+5404_S_2017_07_09_pus_uvs.fits ! Writing UV FITS file: J1120+5404_S_2017_07_09_pus_uvs.fits wwins J1120+5404_S_2017_07_09_pus_map.win ! wwins: Wrote 4 windows to J1120+5404_S_2017_07_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -5.26149e-05 Jy ! Component: 100 - total flux cleaned = 7.32318e-05 Jy ! Component: 150 - total flux cleaned = 9.75497e-05 Jy ! Component: 200 - total flux cleaned = 9.78995e-05 Jy ! Component: 250 - total flux cleaned = 0.000142448 Jy ! Component: 300 - total flux cleaned = 0.00020655 Jy ! Component: 350 - total flux cleaned = 0.000206526 Jy ! Component: 400 - total flux cleaned = 0.000266398 Jy ! Component: 450 - total flux cleaned = 0.000305709 Jy ! Component: 500 - total flux cleaned = 0.000421966 Jy ! Component: 550 - total flux cleaned = 0.000498298 Jy ! Component: 600 - total flux cleaned = 0.00061068 Jy ! Component: 650 - total flux cleaned = 0.000702764 Jy ! Component: 700 - total flux cleaned = 0.000793352 Jy ! Component: 750 - total flux cleaned = 0.000847087 Jy ! Component: 800 - total flux cleaned = 0.000952119 Jy ! Component: 850 - total flux cleaned = 0.000952233 Jy ! Component: 900 - total flux cleaned = 0.000986828 Jy ! Component: 950 - total flux cleaned = 0.0010205 Jy ! Component: 1000 - total flux cleaned = 0.0010204 Jy ! Component: 1050 - total flux cleaned = 0.00102043 Jy ! Component: 1100 - total flux cleaned = 0.00102048 Jy ! Component: 1150 - total flux cleaned = 0.00103641 Jy ! Component: 1200 - total flux cleaned = 0.00100472 Jy ! Component: 1250 - total flux cleaned = 0.000989255 Jy ! Component: 1300 - total flux cleaned = 0.000974201 Jy ! Component: 1350 - total flux cleaned = 0.000989478 Jy ! Component: 1400 - total flux cleaned = 0.00094436 Jy ! Component: 1450 - total flux cleaned = 0.000959409 Jy ! Component: 1500 - total flux cleaned = 0.000914968 Jy ! Component: 1550 - total flux cleaned = 0.000871002 Jy ! Component: 1600 - total flux cleaned = 0.000870814 Jy ! Component: 1650 - total flux cleaned = 0.000856246 Jy ! Component: 1700 - total flux cleaned = 0.000827778 Jy ! Component: 1750 - total flux cleaned = 0.000771116 Jy ! Component: 1800 - total flux cleaned = 0.000771057 Jy ! Component: 1850 - total flux cleaned = 0.000715529 Jy ! Component: 1900 - total flux cleaned = 0.000715777 Jy ! Component: 1950 - total flux cleaned = 0.000715696 Jy ! Component: 2000 - total flux cleaned = 0.000661759 Jy ! Component: 2050 - total flux cleaned = 0.000675159 Jy ! Component: 2100 - total flux cleaned = 0.000688608 Jy ! Component: 2150 - total flux cleaned = 0.000635945 Jy ! Component: 2200 - total flux cleaned = 0.000622905 Jy ! Component: 2250 - total flux cleaned = 0.000674761 Jy ! Component: 2300 - total flux cleaned = 0.000597568 Jy ! Component: 2350 - total flux cleaned = 0.000584817 Jy ! Component: 2400 - total flux cleaned = 0.000572313 Jy ! Component: 2450 - total flux cleaned = 0.000547177 Jy ! Component: 2500 - total flux cleaned = 0.000584518 Jy ! Component: 2550 - total flux cleaned = 0.000535231 Jy ! Component: 2600 - total flux cleaned = 0.000571943 Jy ! Component: 2650 - total flux cleaned = 0.000523238 Jy ! Component: 2700 - total flux cleaned = 0.000511134 Jy ! Component: 2750 - total flux cleaned = 0.000463165 Jy ! Component: 2800 - total flux cleaned = 0.000451239 Jy ! Component: 2850 - total flux cleaned = 0.000427615 Jy ! Component: 2900 - total flux cleaned = 0.000380646 Jy ! Component: 2950 - total flux cleaned = 0.000380627 Jy ! Component: 3000 - total flux cleaned = 0.000357317 Jy ! Component: 3050 - total flux cleaned = 0.000345819 Jy ! Component: 3100 - total flux cleaned = 0.00036884 Jy ! Component: 3150 - total flux cleaned = 0.000323211 Jy ! Component: 3200 - total flux cleaned = 0.000357093 Jy ! Component: 3250 - total flux cleaned = 0.000289617 Jy ! Component: 3300 - total flux cleaned = 0.000311942 Jy ! Component: 3350 - total flux cleaned = 0.000278413 Jy ! Component: 3400 - total flux cleaned = 0.000278308 Jy ! Component: 3450 - total flux cleaned = 0.000234405 Jy ! Component: 3500 - total flux cleaned = 0.000223432 Jy ! Component: 3550 - total flux cleaned = 0.000245108 Jy ! Component: 3600 - total flux cleaned = 0.000234206 Jy ! Component: 3650 - total flux cleaned = 0.000223447 Jy ! Component: 3700 - total flux cleaned = 0.000234174 Jy ! Component: 3750 - total flux cleaned = 0.000212985 Jy ! Component: 3800 - total flux cleaned = 0.000202472 Jy ! Component: 3850 - total flux cleaned = 0.000223471 Jy ! Component: 3900 - total flux cleaned = 0.000233887 Jy ! Component: 3950 - total flux cleaned = 0.000244222 Jy ! Component: 4000 - total flux cleaned = 0.000213221 Jy ! Component: 4050 - total flux cleaned = 0.000254214 Jy ! Total flux subtracted in 4096 components = 0.000213402 Jy ! Clean residual min=-0.000571 max=0.000592 Jy/beam ! Clean residual mean=0.000001 rms=0.000182 Jy/beam ! Combined flux in latest and established models = 0.0822511 Jy keep ! Adding 272 model components to the UV plane model. ! The established model now contains 393 components and 0.0822511 Jy ![Exited script file: muppet] wmap "J1120+5404_S_2017_07_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.87 x 4.999 at 20.62 degrees (North through East) ! Clean map min=-0.0012471 max=0.073679 Jy/beam ! Writing clean map to FITS file: J1120+5404_S_2017_07_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.073679 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000180333 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.734265 0.734265 1.46853 2.93706 5.87412 11.7482 23.4965 46.9929 93.9859 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.073 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.87 x 4.999 at 20.62 degrees (North through East) ! Clean map min=-0.0012471 max=0.073679 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1120+5404_S_2017_07_09_pus_uvs.log closed on Wed May 8 14:47:41 2019