! Started logfile: J1120+1420_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:12:09 2019 obs J1120+1420_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J1120+1420_S_2017_01_16_pus_uva.fits ! AN table 1: 218 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.785525 visibilities/baseline/integration-bin. ! Found source: J1120+1420 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 30824 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1120+1420_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 239 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 239 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 239 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 806 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.884481Jy sigma=0.007613 ! Fit after self-cal, rms=0.833955Jy sigma=0.007178 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.581 mas, bmaj=8.285 mas, bpa=17.19 degrees ! Estimated noise=910.695 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.189677 Jy ! Component: 100 - total flux cleaned = 0.296226 Jy ! Total flux subtracted in 100 components = 0.296226 Jy ! Clean residual min=-0.049663 max=0.091291 Jy/beam ! Clean residual mean=-0.000522 rms=0.015453 Jy/beam ! Combined flux in latest and established models = 0.296226 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 33 components and 0.296226 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.391660Jy sigma=0.003517 ! Fit after self-cal, rms=0.389764Jy sigma=0.003499 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.233 mas, bmaj=8.799 mas, bpa=15.57 degrees ! Estimated noise=505.907 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.137098 Jy ! Component: 100 - total flux cleaned = 0.225217 Jy ! Component: 150 - total flux cleaned = 0.285512 Jy ! Component: 200 - total flux cleaned = 0.327272 Jy ! Total flux subtracted in 200 components = 0.327272 Jy ! Clean residual min=-0.061426 max=0.118585 Jy/beam ! Clean residual mean=-0.000503 rms=0.022034 Jy/beam ! Combined flux in latest and established models = 0.623499 Jy ! Performing phase self-cal ! Adding 52 model components to the UV plane model. ! The established model now contains 77 components and 0.623499 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.335974Jy sigma=0.002968 ! Fit after self-cal, rms=0.333644Jy sigma=0.002949 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.05 HN 1.20 KP 1.00 ! LA 0.61 MK 1.00* NL 1.14 OV 1.51 ! PT 0.81 SC 1.70 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 1.12 HN 1.24 KP 0.94 ! LA 0.59 MK 1.00* NL 1.33 OV 1.74 ! PT 0.83 SC 2.22 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.41 FD 1.16 HN 1.29 KP 0.96 ! LA 0.60 MK 1.00* NL 1.37 OV 1.87 ! PT 0.85 SC 2.42 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.84 FD 0.96 HN 1.74 KP 1.00* ! LA 0.78 MK 1.00* NL 1.00* OV 1.28 ! PT 0.98 SC 1.04 ! ! ! Fit before self-cal, rms=0.333644Jy sigma=0.002949 ! Fit after self-cal, rms=0.402827Jy sigma=0.002612 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.028 mas, bmaj=9.475 mas, bpa=11.81 degrees ! Estimated noise=592.213 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-66.5, 37.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.1304 Jy ! Component: 100 - total flux cleaned = 0.201934 Jy ! Component: 150 - total flux cleaned = 0.24687 Jy ! Component: 200 - total flux cleaned = 0.277667 Jy ! Total flux subtracted in 200 components = 0.277667 Jy ! Clean residual min=-0.055000 max=0.082927 Jy/beam ! Clean residual mean=-0.000104 rms=0.018726 Jy/beam ! Combined flux in latest and established models = 0.901166 Jy ! Performing phase self-cal ! Adding 65 model components to the UV plane model. ! The established model now contains 141 components and 0.901166 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.358141Jy sigma=0.002166 ! Fit after self-cal, rms=0.346727Jy sigma=0.001943 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.346727Jy sigma=0.001943 ! Fit after self-cal, rms=0.427326Jy sigma=0.001477 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.094 mas, bmaj=9.483 mas, bpa=15.85 degrees ! Estimated noise=589.691 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0274264 Jy ! Component: 100 - total flux cleaned = 0.036465 Jy ! Component: 150 - total flux cleaned = 0.0384221 Jy ! Component: 200 - total flux cleaned = 0.0400053 Jy ! Total flux subtracted in 200 components = 0.0400053 Jy ! Clean residual min=-0.042841 max=0.046794 Jy/beam ! Clean residual mean=0.000110 rms=0.010027 Jy/beam ! Combined flux in latest and established models = 0.941171 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 165 components and 0.941171 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.416807Jy sigma=0.001388 ! Fit after self-cal, rms=0.413915Jy sigma=0.001347 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-10, 6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0258975 Jy ! Component: 100 - total flux cleaned = 0.028437 Jy ! Component: 150 - total flux cleaned = 0.02852 Jy ! Component: 200 - total flux cleaned = 0.0294259 Jy ! Total flux subtracted in 200 components = 0.0294259 Jy ! Clean residual min=-0.037467 max=0.032645 Jy/beam ! Clean residual mean=0.000161 rms=0.008579 Jy/beam ! Combined flux in latest and established models = 0.970597 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 201 components and 0.970597 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.402829Jy sigma=0.001253 ! Fit after self-cal, rms=0.399513Jy sigma=0.001231 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.399513Jy sigma=0.001231 ! Fit after self-cal, rms=0.293166Jy sigma=0.001181 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.206 mas, bmaj=9.431 mas, bpa=13.34 degrees ! Estimated noise=560.141 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0102995 Jy ! Component: 100 - total flux cleaned = 0.0211405 Jy ! Component: 150 - total flux cleaned = 0.028276 Jy ! Component: 200 - total flux cleaned = 0.0322369 Jy ! Total flux subtracted in 200 components = 0.0322369 Jy ! Clean residual min=-0.030989 max=0.027149 Jy/beam ! Clean residual mean=0.000072 rms=0.006709 Jy/beam ! Combined flux in latest and established models = 1.00283 Jy selfcal ! Performing phase self-cal ! Adding 50 model components to the UV plane model. ! The established model now contains 243 components and 1.00283 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.285798Jy sigma=0.001104 ! Fit after self-cal, rms=0.281705Jy sigma=0.001082 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0102939 Jy ! Component: 100 - total flux cleaned = 0.0125047 Jy ! Component: 150 - total flux cleaned = 0.0137868 Jy ! Component: 200 - total flux cleaned = 0.0148735 Jy ! Total flux subtracted in 200 components = 0.0148735 Jy ! Clean residual min=-0.028351 max=0.024843 Jy/beam ! Clean residual mean=0.000079 rms=0.006081 Jy/beam ! Combined flux in latest and established models = 1.01771 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 269 components and 1.01771 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.277195Jy sigma=0.001043 ! Fit after self-cal, rms=0.275141Jy sigma=0.001031 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.275141Jy sigma=0.001031 ! Fit after self-cal, rms=0.227571Jy sigma=0.000999 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.374 mas, bmaj=11.53 mas, bpa=-0.122 degrees ! Estimated noise=524.476 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00369763 Jy ! Component: 100 - total flux cleaned = 0.0115065 Jy ! Component: 150 - total flux cleaned = 0.0170352 Jy ! Component: 200 - total flux cleaned = 0.0205752 Jy ! Total flux subtracted in 200 components = 0.0205752 Jy ! Clean residual min=-0.021863 max=0.023037 Jy/beam ! Clean residual mean=0.000062 rms=0.005371 Jy/beam ! Combined flux in latest and established models = 1.03828 Jy selfcal ! Performing phase self-cal ! Adding 59 model components to the UV plane model. ! The established model now contains 318 components and 1.03828 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.224405Jy sigma=0.000950 ! Fit after self-cal, rms=0.222801Jy sigma=0.000937 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00518974 Jy ! Component: 100 - total flux cleaned = 0.00876919 Jy ! Component: 150 - total flux cleaned = 0.00990609 Jy ! Component: 200 - total flux cleaned = 0.0102358 Jy ! Total flux subtracted in 200 components = 0.0102358 Jy ! Clean residual min=-0.019501 max=0.020206 Jy/beam ! Clean residual mean=0.000068 rms=0.004746 Jy/beam ! Combined flux in latest and established models = 1.04852 Jy ! Performing phase self-cal ! Adding 54 model components to the UV plane model. ! The established model now contains 353 components and 1.04852 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.221082Jy sigma=0.000916 ! Fit after self-cal, rms=0.220679Jy sigma=0.000911 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=5.294 mas, bmaj=9.511 mas, bpa=12.04 degrees ! Estimated noise=544.296 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.294 x 9.511 at 12.04 degrees (North through East) ! Clean map min=-0.028651 max=0.21173 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.315 mas, bmaj=8.635 mas, bpa=14.33 degrees ! Estimated noise=1104.25 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.212349 Jy ! Component: 100 - total flux cleaned = 0.359412 Jy ! Component: 150 - total flux cleaned = 0.474132 Jy ! Component: 200 - total flux cleaned = 0.564876 Jy ! Total flux subtracted in 200 components = 0.564876 Jy ! Clean residual min=-0.035740 max=0.057749 Jy/beam ! Clean residual mean=-0.000337 rms=0.011429 Jy/beam ! Combined flux in latest and established models = 0.564876 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 54 model components to the UV plane model. ! The established model now contains 54 components and 0.564876 Jy ! Inverting map and beam ! Estimated beam: bmin=5.294 mas, bmaj=9.511 mas, bpa=12.04 degrees ! Estimated noise=544.296 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.106965 Jy ! Component: 100 - total flux cleaned = 0.184713 Jy ! Component: 150 - total flux cleaned = 0.245354 Jy ! Component: 200 - total flux cleaned = 0.294031 Jy ! Total flux subtracted in 200 components = 0.294031 Jy ! Clean residual min=-0.025436 max=0.032668 Jy/beam ! Clean residual mean=-0.000145 rms=0.007928 Jy/beam ! Combined flux in latest and established models = 0.858906 Jy ! Adding 97 model components to the UV plane model. ! The established model now contains 143 components and 0.858906 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.374 mas, bmaj=11.53 mas, bpa=-0.122 degrees ! Estimated noise=524.476 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.05218 Jy ! Component: 100 - total flux cleaned = 0.0894097 Jy ! Component: 150 - total flux cleaned = 0.112316 Jy ! Component: 200 - total flux cleaned = 0.126042 Jy ! Total flux subtracted in 200 components = 0.126042 Jy ! Clean residual min=-0.019871 max=0.018183 Jy/beam ! Clean residual mean=-0.000027 rms=0.005727 Jy/beam ! Combined flux in latest and established models = 0.984948 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00846318 Jy ! Component: 100 - total flux cleaned = 0.0163357 Jy ! Component: 150 - total flux cleaned = 0.0230355 Jy ! Component: 200 - total flux cleaned = 0.0278574 Jy ! Total flux subtracted in 200 components = 0.0278574 Jy ! Clean residual min=-0.018689 max=0.014938 Jy/beam ! Clean residual mean=0.000023 rms=0.004755 Jy/beam ! Combined flux in latest and established models = 1.01281 Jy ! Adding 130 model components to the UV plane model. ! The established model now contains 260 components and 1.0128 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=5.294 mas, bmaj=9.511 mas, bpa=12.04 degrees ! Estimated noise=544.296 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0050754 Jy ! Component: 100 - total flux cleaned = 0.00958121 Jy ! Component: 150 - total flux cleaned = 0.0116082 Jy ! Component: 200 - total flux cleaned = 0.0123426 Jy ! Total flux subtracted in 200 components = 0.0123426 Jy ! Clean residual min=-0.018727 max=0.015079 Jy/beam ! Clean residual mean=0.000030 rms=0.004271 Jy/beam ! Combined flux in latest and established models = 1.02515 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 288 components and 1.02515 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.219570Jy sigma=0.000904 ! Fit after self-cal, rms=0.215998Jy sigma=0.000881 wmodel J1120+1420_S_2017_01_16_pus_map.mod ! Writing 288 model components to file: J1120+1420_S_2017_01_16_pus_map.mod wobs J1120+1420_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J1120+1420_S_2017_01_16_pus_uvs.fits wwins J1120+1420_S_2017_01_16_pus_map.win ! wwins: Wrote 3 windows to J1120+1420_S_2017_01_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00214802 Jy ! Component: 100 - total flux cleaned = 0.00107882 Jy ! Component: 150 - total flux cleaned = -0.00175925 Jy ! Component: 200 - total flux cleaned = -0.00497181 Jy ! Component: 250 - total flux cleaned = -0.00734295 Jy ! Component: 300 - total flux cleaned = -0.00825962 Jy ! Component: 350 - total flux cleaned = -0.00937355 Jy ! Component: 400 - total flux cleaned = -0.00980656 Jy ! Component: 450 - total flux cleaned = -0.0104324 Jy ! Component: 500 - total flux cleaned = -0.010431 Jy ! Component: 550 - total flux cleaned = -0.0108293 Jy ! Component: 600 - total flux cleaned = -0.0104354 Jy ! Component: 650 - total flux cleaned = -0.0102453 Jy ! Component: 700 - total flux cleaned = -0.0106209 Jy ! Component: 750 - total flux cleaned = -0.0104324 Jy ! Component: 800 - total flux cleaned = -0.0102468 Jy ! Component: 850 - total flux cleaned = -0.0100696 Jy ! Component: 900 - total flux cleaned = -0.0097228 Jy ! Component: 950 - total flux cleaned = -0.00990084 Jy ! Component: 1000 - total flux cleaned = -0.00939331 Jy ! Component: 1050 - total flux cleaned = -0.00922153 Jy ! Component: 1100 - total flux cleaned = -0.00823093 Jy ! Component: 1150 - total flux cleaned = -0.00741638 Jy ! Component: 1200 - total flux cleaned = -0.00661536 Jy ! Component: 1250 - total flux cleaned = -0.00582969 Jy ! Component: 1300 - total flux cleaned = -0.00552205 Jy ! Component: 1350 - total flux cleaned = -0.0058281 Jy ! Component: 1400 - total flux cleaned = -0.00582747 Jy ! Component: 1450 - total flux cleaned = -0.00657282 Jy ! Component: 1500 - total flux cleaned = -0.00656925 Jy ! Component: 1550 - total flux cleaned = -0.00729883 Jy ! Component: 1600 - total flux cleaned = -0.00686682 Jy ! Component: 1650 - total flux cleaned = -0.00672658 Jy ! Component: 1700 - total flux cleaned = -0.00729105 Jy ! Component: 1750 - total flux cleaned = -0.00770792 Jy ! Component: 1800 - total flux cleaned = -0.00811865 Jy ! Component: 1850 - total flux cleaned = -0.00784467 Jy ! Component: 1900 - total flux cleaned = -0.00757568 Jy ! Component: 1950 - total flux cleaned = -0.00810877 Jy ! Component: 2000 - total flux cleaned = -0.00784667 Jy ! Component: 2050 - total flux cleaned = -0.00797898 Jy ! Component: 2100 - total flux cleaned = -0.00823588 Jy ! Component: 2150 - total flux cleaned = -0.00798138 Jy ! Component: 2200 - total flux cleaned = -0.00797896 Jy ! Component: 2250 - total flux cleaned = -0.00797805 Jy ! Component: 2300 - total flux cleaned = -0.00785774 Jy ! Component: 2350 - total flux cleaned = -0.00809987 Jy ! Component: 2400 - total flux cleaned = -0.00798071 Jy ! Component: 2450 - total flux cleaned = -0.00774169 Jy ! Component: 2500 - total flux cleaned = -0.00762694 Jy ! Component: 2550 - total flux cleaned = -0.00715934 Jy ! Component: 2600 - total flux cleaned = -0.00750959 Jy ! Component: 2650 - total flux cleaned = -0.0071653 Jy ! Component: 2700 - total flux cleaned = -0.00704999 Jy ! Component: 2750 - total flux cleaned = -0.00659731 Jy ! Component: 2800 - total flux cleaned = -0.00659655 Jy ! Component: 2850 - total flux cleaned = -0.00648487 Jy ! Component: 2900 - total flux cleaned = -0.00604592 Jy ! Component: 2950 - total flux cleaned = -0.00582765 Jy ! Component: 3000 - total flux cleaned = -0.00561194 Jy ! Component: 3050 - total flux cleaned = -0.00539787 Jy ! Component: 3100 - total flux cleaned = -0.00571734 Jy ! Component: 3150 - total flux cleaned = -0.00561158 Jy ! Component: 3200 - total flux cleaned = -0.00550707 Jy ! Component: 3250 - total flux cleaned = -0.00571352 Jy ! Component: 3300 - total flux cleaned = -0.00560986 Jy ! Component: 3350 - total flux cleaned = -0.00540695 Jy ! Component: 3400 - total flux cleaned = -0.00540743 Jy ! Component: 3450 - total flux cleaned = -0.00520795 Jy ! Component: 3500 - total flux cleaned = -0.00530729 Jy ! Component: 3550 - total flux cleaned = -0.0053072 Jy ! Component: 3600 - total flux cleaned = -0.00560186 Jy ! Component: 3650 - total flux cleaned = -0.00579595 Jy ! Component: 3700 - total flux cleaned = -0.00646887 Jy ! Component: 3750 - total flux cleaned = -0.00608644 Jy ! Component: 3800 - total flux cleaned = -0.00627683 Jy ! Component: 3850 - total flux cleaned = -0.00646609 Jy ! Component: 3900 - total flux cleaned = -0.0067465 Jy ! Component: 3950 - total flux cleaned = -0.00656127 Jy ! Component: 4000 - total flux cleaned = -0.00665348 Jy ! Component: 4050 - total flux cleaned = -0.00683637 Jy ! Total flux subtracted in 4096 components = -0.00710952 Jy ! Clean residual min=-0.004773 max=0.005114 Jy/beam ! Clean residual mean=-0.000000 rms=0.001761 Jy/beam ! Combined flux in latest and established models = 1.01804 Jy keep ! Adding 287 model components to the UV plane model. ! The established model now contains 574 components and 1.01804 Jy ![Exited script file: muppet] wmap "J1120+1420_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.294 x 9.511 at 12.04 degrees (North through East) ! Clean map min=-0.020759 max=0.21664 Jy/beam ! Writing clean map to FITS file: J1120+1420_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.216643 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00174395 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.41496 2.41496 4.82992 9.65985 19.3197 38.6394 77.2788 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0052 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.216 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.294 x 9.511 at 12.04 degrees (North through East) ! Clean map min=-0.020759 max=0.21664 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1120+1420_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:12:16 2019