! Started logfile: J1114-3652_S_2017_10_21_pus_uvs.log on Sat May 11 20:57:04 2019 obs J1114-3652_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J1114-3652_S_2017_10_21_pus_uva.fits ! AN table 1: 144 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.433449 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1114-3652 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 8988 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1114-3652_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 637 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 680 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 572 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 914 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.012221Jy sigma=0.006454 ! Fit after self-cal, rms=0.929079Jy sigma=0.005947 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.886 mas, bmaj=17.81 mas, bpa=-19.86 degrees ! Estimated noise=2055.19 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0609162 Jy ! Component: 100 - total flux cleaned = 0.0770333 Jy ! Total flux subtracted in 100 components = 0.0770333 Jy ! Clean residual min=-0.008325 max=0.008213 Jy/beam ! Clean residual mean=0.000007 rms=0.002215 Jy/beam ! Combined flux in latest and established models = 0.0770333 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0770333 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125720Jy sigma=0.000677 ! Fit after self-cal, rms=0.124562Jy sigma=0.000670 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.496 mas, bmaj=20.72 mas, bpa=-20.56 degrees ! Estimated noise=1494.91 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00440563 Jy ! Component: 100 - total flux cleaned = 0.00453082 Jy ! Component: 150 - total flux cleaned = 0.00474169 Jy ! Component: 200 - total flux cleaned = 0.00483379 Jy ! Total flux subtracted in 200 components = 0.00483379 Jy ! Clean residual min=-0.005472 max=0.006258 Jy/beam ! Clean residual mean=-0.000018 rms=0.001812 Jy/beam ! Combined flux in latest and established models = 0.0818671 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 29 components and 0.0818671 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124118Jy sigma=0.000669 ! Fit after self-cal, rms=0.123954Jy sigma=0.000668 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 84 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.06 HN 1.00* KP 1.24 ! LA 1.01 MK 0.89 NL 1.00* OV 1.09 ! PT 0.86 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 HN 0.88 KP 1.20 ! LA 1.07 MK 1.10 NL 0.97 OV 1.13 ! PT 0.86 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 0.86 KP 1.24 ! LA 0.90 MK 1.11 NL 1.13 OV 1.04 ! PT 0.82 ! ! ! Correcting IF 4. ! A total of 42 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.10 HN 0.77 KP 1.00* ! LA 0.88 MK 0.96 NL 1.00* OV 1.00* ! PT 0.69 ! ! ! Fit before self-cal, rms=0.123954Jy sigma=0.000668 ! Fit after self-cal, rms=0.115828Jy sigma=0.000664 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.429 mas, bmaj=19.82 mas, bpa=-19.99 degrees ! Estimated noise=1494.49 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00043846 Jy ! Component: 100 - total flux cleaned = 0.000439223 Jy ! Component: 150 - total flux cleaned = 0.00044297 Jy ! Component: 200 - total flux cleaned = 0.00044411 Jy ! Total flux subtracted in 200 components = 0.00044411 Jy ! Clean residual min=-0.003062 max=0.003531 Jy/beam ! Clean residual mean=0.000029 rms=0.000969 Jy/beam ! Combined flux in latest and established models = 0.0823112 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 44 components and 0.0823112 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115769Jy sigma=0.000664 ! Fit after self-cal, rms=0.116297Jy sigma=0.000662 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116297Jy sigma=0.000662 ! Fit after self-cal, rms=0.119727Jy sigma=0.000661 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.422 mas, bmaj=19.78 mas, bpa=-20 degrees ! Estimated noise=1508.3 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000521142 Jy ! Component: 100 - total flux cleaned = 0.000606347 Jy ! Component: 150 - total flux cleaned = 0.000677953 Jy ! Component: 200 - total flux cleaned = 0.000739996 Jy ! Total flux subtracted in 200 components = 0.000739996 Jy ! Clean residual min=-0.002757 max=0.003281 Jy/beam ! Clean residual mean=0.000015 rms=0.000851 Jy/beam ! Combined flux in latest and established models = 0.0830512 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 57 components and 0.0830512 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119690Jy sigma=0.000661 ! Fit after self-cal, rms=0.120248Jy sigma=0.000660 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.93441e-05 Jy ! Component: 100 - total flux cleaned = -4.58481e-05 Jy ! Component: 150 - total flux cleaned = -4.51335e-05 Jy ! Component: 200 - total flux cleaned = -7.62329e-05 Jy ! Total flux subtracted in 200 components = -7.62329e-05 Jy ! Clean residual min=-0.002905 max=0.003369 Jy/beam ! Clean residual mean=0.000022 rms=0.000867 Jy/beam ! Combined flux in latest and established models = 0.082975 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 70 components and 0.082975 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120212Jy sigma=0.000660 ! Fit after self-cal, rms=0.120204Jy sigma=0.000660 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120204Jy sigma=0.000660 ! Fit after self-cal, rms=0.122841Jy sigma=0.000659 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.424 mas, bmaj=19.85 mas, bpa=-20.02 degrees ! Estimated noise=1512.67 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.3307e-05 Jy ! Component: 100 - total flux cleaned = 5.27629e-05 Jy ! Component: 150 - total flux cleaned = 8.85995e-05 Jy ! Component: 200 - total flux cleaned = 0.000152379 Jy ! Total flux subtracted in 200 components = 0.000152379 Jy ! Clean residual min=-0.002815 max=0.003427 Jy/beam ! Clean residual mean=-0.000001 rms=0.000842 Jy/beam ! Combined flux in latest and established models = 0.0831274 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 75 components and 0.0831274 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122803Jy sigma=0.000659 ! Fit after self-cal, rms=0.123153Jy sigma=0.000659 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (6.5, 113). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00103565 Jy ! Component: 100 - total flux cleaned = 0.000520557 Jy ! Component: 150 - total flux cleaned = 5.7544e-05 Jy ! Component: 200 - total flux cleaned = -0.000235867 Jy ! Total flux subtracted in 200 components = -0.000235867 Jy ! Clean residual min=-0.002552 max=0.003029 Jy/beam ! Clean residual mean=0.000011 rms=0.000738 Jy/beam ! Combined flux in latest and established models = 0.0828915 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 100 components and 0.0828915 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123000Jy sigma=0.000658 ! Fit after self-cal, rms=0.122932Jy sigma=0.000657 ! Inverting map ! Added new window around map position (-69.5, -8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00226219 Jy ! Component: 100 - total flux cleaned = 0.00244364 Jy ! Component: 150 - total flux cleaned = 0.00277247 Jy ! Component: 200 - total flux cleaned = 0.00326262 Jy ! Total flux subtracted in 200 components = 0.00326262 Jy ! Clean residual min=-0.002281 max=0.002488 Jy/beam ! Clean residual mean=0.000007 rms=0.000657 Jy/beam ! Combined flux in latest and established models = 0.0861541 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 121 components and 0.0861541 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122780Jy sigma=0.000657 ! Fit after self-cal, rms=0.122728Jy sigma=0.000656 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122728Jy sigma=0.000656 ! Fit after self-cal, rms=0.122722Jy sigma=0.000656 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.68 mas, bmaj=40.54 mas, bpa=-9.191 degrees ! Estimated noise=1767.34 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00118923 Jy ! Component: 100 - total flux cleaned = 0.00170435 Jy ! Component: 150 - total flux cleaned = 0.0019398 Jy ! Component: 200 - total flux cleaned = 0.00222743 Jy ! Total flux subtracted in 200 components = 0.00222743 Jy ! Clean residual min=-0.002015 max=0.001929 Jy/beam ! Clean residual mean=-0.000002 rms=0.000616 Jy/beam ! Combined flux in latest and established models = 0.0883815 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 143 components and 0.0883815 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122660Jy sigma=0.000656 ! Fit after self-cal, rms=0.122775Jy sigma=0.000656 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00055303 Jy ! Component: 100 - total flux cleaned = 0.000557434 Jy ! Component: 150 - total flux cleaned = 0.000680692 Jy ! Component: 200 - total flux cleaned = 0.00071774 Jy ! Total flux subtracted in 200 components = 0.00071774 Jy ! Clean residual min=-0.002042 max=0.001952 Jy/beam ! Clean residual mean=0.000005 rms=0.000643 Jy/beam ! Combined flux in latest and established models = 0.0890993 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 154 components and 0.0890993 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122735Jy sigma=0.000656 ! Fit after self-cal, rms=0.122723Jy sigma=0.000656 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.421 mas, bmaj=19.89 mas, bpa=-20.05 degrees ! Estimated noise=1499.23 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.421 x 19.89 at -20.05 degrees (North through East) ! Clean map min=-0.0057527 max=0.076485 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.861 mas, bmaj=17.43 mas, bpa=-19.46 degrees ! Estimated noise=1998.08 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0580335 Jy ! Component: 100 - total flux cleaned = 0.0754398 Jy ! Component: 150 - total flux cleaned = 0.0813253 Jy ! Component: 200 - total flux cleaned = 0.0847782 Jy ! Total flux subtracted in 200 components = 0.0847782 Jy ! Clean residual min=-0.005370 max=0.005661 Jy/beam ! Clean residual mean=0.000002 rms=0.001400 Jy/beam ! Combined flux in latest and established models = 0.0847782 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.0847782 Jy ! Inverting map and beam ! Estimated beam: bmin=3.421 mas, bmaj=19.89 mas, bpa=-20.05 degrees ! Estimated noise=1499.23 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00199375 Jy ! Component: 100 - total flux cleaned = 0.0021482 Jy ! Component: 150 - total flux cleaned = 0.00239435 Jy ! Component: 200 - total flux cleaned = 0.00261303 Jy ! Total flux subtracted in 200 components = 0.00261303 Jy ! Clean residual min=-0.002724 max=0.003219 Jy/beam ! Clean residual mean=-0.000007 rms=0.000835 Jy/beam ! Combined flux in latest and established models = 0.0873912 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 45 components and 0.0873912 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.68 mas, bmaj=40.54 mas, bpa=-9.191 degrees ! Estimated noise=1767.34 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00107275 Jy ! Component: 100 - total flux cleaned = -0.000165703 Jy ! Component: 150 - total flux cleaned = 0.000620748 Jy ! Component: 200 - total flux cleaned = 0.00110352 Jy ! Total flux subtracted in 200 components = 0.00110352 Jy ! Clean residual min=-0.002254 max=0.002313 Jy/beam ! Clean residual mean=0.000008 rms=0.000726 Jy/beam ! Combined flux in latest and established models = 0.0884947 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000145207 Jy ! Component: 100 - total flux cleaned = 0.000190679 Jy ! Component: 150 - total flux cleaned = 0.000277508 Jy ! Component: 200 - total flux cleaned = 0.000279216 Jy ! Total flux subtracted in 200 components = 0.000279216 Jy ! Clean residual min=-0.002117 max=0.002129 Jy/beam ! Clean residual mean=0.000006 rms=0.000686 Jy/beam ! Combined flux in latest and established models = 0.0887739 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 91 components and 0.088774 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.421 mas, bmaj=19.89 mas, bpa=-20.05 degrees ! Estimated noise=1499.23 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000427856 Jy ! Component: 100 - total flux cleaned = -0.000430836 Jy ! Component: 150 - total flux cleaned = -0.000494194 Jy ! Component: 200 - total flux cleaned = -0.000435335 Jy ! Total flux subtracted in 200 components = -0.000435335 Jy ! Clean residual min=-0.002520 max=0.002601 Jy/beam ! Clean residual mean=0.000002 rms=0.000679 Jy/beam ! Combined flux in latest and established models = 0.0883386 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 115 components and 0.0883386 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122709Jy sigma=0.000656 ! Fit after self-cal, rms=0.122783Jy sigma=0.000656 wmodel J1114-3652_S_2017_10_21_pus_map.mod ! Writing 115 model components to file: J1114-3652_S_2017_10_21_pus_map.mod wobs J1114-3652_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J1114-3652_S_2017_10_21_pus_uvs.fits wwins J1114-3652_S_2017_10_21_pus_map.win ! wwins: Wrote 3 windows to J1114-3652_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000576684 Jy ! Component: 100 - total flux cleaned = -0.00083468 Jy ! Component: 150 - total flux cleaned = -0.000996815 Jy ! Component: 200 - total flux cleaned = -0.00107645 Jy ! Component: 250 - total flux cleaned = -0.00104262 Jy ! Component: 300 - total flux cleaned = -0.00107855 Jy ! Component: 350 - total flux cleaned = -0.00114674 Jy ! Component: 400 - total flux cleaned = -0.00121208 Jy ! Component: 450 - total flux cleaned = -0.0012121 Jy ! Component: 500 - total flux cleaned = -0.001243 Jy ! Component: 550 - total flux cleaned = -0.00118299 Jy ! Component: 600 - total flux cleaned = -0.00121251 Jy ! Component: 650 - total flux cleaned = -0.00121254 Jy ! Component: 700 - total flux cleaned = -0.00123988 Jy ! Component: 750 - total flux cleaned = -0.00121165 Jy ! Component: 800 - total flux cleaned = -0.00118526 Jy ! Component: 850 - total flux cleaned = -0.00121174 Jy ! Component: 900 - total flux cleaned = -0.00139224 Jy ! Component: 950 - total flux cleaned = -0.00149303 Jy ! Component: 1000 - total flux cleaned = -0.00154275 Jy ! Component: 1050 - total flux cleaned = -0.00168929 Jy ! Component: 1100 - total flux cleaned = -0.00176103 Jy ! Component: 1150 - total flux cleaned = -0.00183181 Jy ! Component: 1200 - total flux cleaned = -0.00204099 Jy ! Component: 1250 - total flux cleaned = -0.00215455 Jy ! Component: 1300 - total flux cleaned = -0.0022898 Jy ! Component: 1350 - total flux cleaned = -0.00240046 Jy ! Component: 1400 - total flux cleaned = -0.00250994 Jy ! Component: 1450 - total flux cleaned = -0.00259664 Jy ! Component: 1500 - total flux cleaned = -0.00274584 Jy ! Component: 1550 - total flux cleaned = -0.00282991 Jy ! Component: 1600 - total flux cleaned = -0.00297498 Jy ! Component: 1650 - total flux cleaned = -0.00309784 Jy ! Component: 1700 - total flux cleaned = -0.0031986 Jy ! Component: 1750 - total flux cleaned = -0.00323866 Jy ! Component: 1800 - total flux cleaned = -0.00333731 Jy ! Component: 1850 - total flux cleaned = -0.0034736 Jy ! Component: 1900 - total flux cleaned = -0.00355048 Jy ! Component: 1950 - total flux cleaned = -0.00366437 Jy ! Component: 2000 - total flux cleaned = -0.00381446 Jy ! Component: 2050 - total flux cleaned = -0.00390746 Jy ! Component: 2100 - total flux cleaned = -0.00399939 Jy ! Component: 2150 - total flux cleaned = -0.00403601 Jy ! Component: 2200 - total flux cleaned = -0.00403585 Jy ! Component: 2250 - total flux cleaned = -0.00410757 Jy ! Component: 2300 - total flux cleaned = -0.00414322 Jy ! Component: 2350 - total flux cleaned = -0.00421355 Jy ! Component: 2400 - total flux cleaned = -0.00426615 Jy ! Component: 2450 - total flux cleaned = -0.00433554 Jy ! Component: 2500 - total flux cleaned = -0.00440403 Jy ! Component: 2550 - total flux cleaned = -0.00447186 Jy ! Component: 2600 - total flux cleaned = -0.00453939 Jy ! Component: 2650 - total flux cleaned = -0.00453946 Jy ! Component: 2700 - total flux cleaned = -0.00462256 Jy ! Component: 2750 - total flux cleaned = -0.00463898 Jy ! Component: 2800 - total flux cleaned = -0.00467174 Jy ! Component: 2850 - total flux cleaned = -0.00472063 Jy ! Component: 2900 - total flux cleaned = -0.00476902 Jy ! Component: 2950 - total flux cleaned = -0.00483316 Jy ! Component: 3000 - total flux cleaned = -0.00484896 Jy ! Component: 3050 - total flux cleaned = -0.00484903 Jy ! Component: 3100 - total flux cleaned = -0.00491185 Jy ! Component: 3150 - total flux cleaned = -0.00492756 Jy ! Component: 3200 - total flux cleaned = -0.00498948 Jy ! Component: 3250 - total flux cleaned = -0.00502011 Jy ! Component: 3300 - total flux cleaned = -0.0050659 Jy ! Component: 3350 - total flux cleaned = -0.005081 Jy ! Component: 3400 - total flux cleaned = -0.00514143 Jy ! Component: 3450 - total flux cleaned = -0.00520135 Jy ! Component: 3500 - total flux cleaned = -0.00521615 Jy ! Component: 3550 - total flux cleaned = -0.00526079 Jy ! Component: 3600 - total flux cleaned = -0.00527567 Jy ! Component: 3650 - total flux cleaned = -0.00533454 Jy ! Component: 3700 - total flux cleaned = -0.00536388 Jy ! Component: 3750 - total flux cleaned = -0.00540768 Jy ! Component: 3800 - total flux cleaned = -0.00543665 Jy ! Component: 3850 - total flux cleaned = -0.00545112 Jy ! Component: 3900 - total flux cleaned = -0.00549423 Jy ! Component: 3950 - total flux cleaned = -0.0055513 Jy ! Component: 4000 - total flux cleaned = -0.00555129 Jy ! Component: 4050 - total flux cleaned = -0.00557968 Jy ! Total flux subtracted in 4096 components = -0.00563625 Jy ! Clean residual min=-0.000794 max=0.000841 Jy/beam ! Clean residual mean=0.000001 rms=0.000271 Jy/beam ! Combined flux in latest and established models = 0.0827024 Jy keep ! Adding 270 model components to the UV plane model. ! The established model now contains 382 components and 0.0827024 Jy ![Exited script file: muppet] wmap "J1114-3652_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.421 x 19.89 at -20.05 degrees (North through East) ! Clean map min=-0.0037761 max=0.072579 Jy/beam ! Writing clean map to FITS file: J1114-3652_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0725785 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000271273 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.12129 1.12129 2.24259 4.48517 8.97035 17.9407 35.8814 71.7628 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.072 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.421 x 19.89 at -20.05 degrees (North through East) ! Clean map min=-0.0037761 max=0.072579 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1114-3652_S_2017_10_21_pus_uvs.log closed on Sat May 11 20:57:09 2019