! Started logfile: J1114-3652_S_2017_08_12_pus_uvs.log on Fri May 10 14:58:33 2019 obs J1114-3652_S_2017_08_12_pus_uva.fits ! Reading UV FITS file: J1114-3652_S_2017_08_12_pus_uva.fits ! AN table 1: 134 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.433997 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1114-3652 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 10468 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1114-3652_S_2017_08_12_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 460 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 436 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 460 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1097 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.982918Jy sigma=0.006293 ! Fit after self-cal, rms=0.933254Jy sigma=0.005970 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.27 mas, bmaj=6.057 mas, bpa=-4.156 degrees ! Estimated noise=1968.34 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0551519 Jy ! Component: 100 - total flux cleaned = 0.0672114 Jy ! Total flux subtracted in 100 components = 0.0672114 Jy ! Clean residual min=-0.005305 max=0.004582 Jy/beam ! Clean residual mean=-0.000011 rms=0.001201 Jy/beam ! Combined flux in latest and established models = 0.0672114 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.0672114 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099605Jy sigma=0.000621 ! Fit after self-cal, rms=0.098961Jy sigma=0.000617 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.967 mas, bmaj=7.721 mas, bpa=0.3633 degrees ! Estimated noise=1258.95 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00495131 Jy ! Component: 100 - total flux cleaned = 0.0066959 Jy ! Component: 150 - total flux cleaned = 0.00699987 Jy ! Component: 200 - total flux cleaned = 0.00705739 Jy ! Total flux subtracted in 200 components = 0.00705739 Jy ! Clean residual min=-0.003131 max=0.002755 Jy/beam ! Clean residual mean=-0.000003 rms=0.000737 Jy/beam ! Combined flux in latest and established models = 0.0742688 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 17 components and 0.0742688 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098739Jy sigma=0.000616 ! Fit after self-cal, rms=0.098747Jy sigma=0.000616 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.94 HN 1.00* KP 1.03 ! LA 0.95 MK 1.03 NL 1.00* OV 1.04 ! PT 1.08 SC 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 HN 1.00* KP 1.00 ! LA 0.99 MK 1.04 NL 1.00* OV 1.02 ! PT 1.01 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 1.00* KP 0.93 ! LA 0.94 MK 1.04 NL 1.00* OV 1.00 ! PT 1.01 SC 1.01 ! ! ! Correcting IF 4. ! A total of 243 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.098747Jy sigma=0.000616 ! Fit after self-cal, rms=0.099285Jy sigma=0.000619 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.988 mas, bmaj=7.887 mas, bpa=1.913 degrees ! Estimated noise=1284.93 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.3141e-05 Jy ! Component: 100 - total flux cleaned = -6.17162e-05 Jy ! Component: 150 - total flux cleaned = -8.50394e-05 Jy ! Component: 200 - total flux cleaned = -0.000102928 Jy ! Total flux subtracted in 200 components = -0.000102928 Jy ! Clean residual min=-0.003036 max=0.002948 Jy/beam ! Clean residual mean=-0.000003 rms=0.000703 Jy/beam ! Combined flux in latest and established models = 0.0741659 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 22 components and 0.0741659 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099268Jy sigma=0.000619 ! Fit after self-cal, rms=0.099231Jy sigma=0.000619 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099231Jy sigma=0.000619 ! Fit after self-cal, rms=0.099623Jy sigma=0.000618 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.991 mas, bmaj=7.892 mas, bpa=1.991 degrees ! Estimated noise=1287.03 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.35439e-05 Jy ! Component: 100 - total flux cleaned = 4.71377e-05 Jy ! Component: 150 - total flux cleaned = 6.62455e-05 Jy ! Component: 200 - total flux cleaned = 6.57784e-05 Jy ! Total flux subtracted in 200 components = 6.57784e-05 Jy ! Clean residual min=-0.002869 max=0.002810 Jy/beam ! Clean residual mean=0.000001 rms=0.000646 Jy/beam ! Combined flux in latest and established models = 0.0742316 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 26 components and 0.0742316 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099612Jy sigma=0.000618 ! Fit after self-cal, rms=0.099639Jy sigma=0.000618 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.02801e-05 Jy ! Component: 100 - total flux cleaned = 1.77e-05 Jy ! Component: 150 - total flux cleaned = 3.04896e-07 Jy ! Component: 200 - total flux cleaned = 1.05028e-07 Jy ! Total flux subtracted in 200 components = 1.05028e-07 Jy ! Clean residual min=-0.002880 max=0.002834 Jy/beam ! Clean residual mean=0.000002 rms=0.000655 Jy/beam ! Combined flux in latest and established models = 0.0742317 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 27 components and 0.0742317 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099630Jy sigma=0.000618 ! Fit after self-cal, rms=0.099630Jy sigma=0.000618 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099630Jy sigma=0.000618 ! Fit after self-cal, rms=0.100127Jy sigma=0.000618 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.99 mas, bmaj=7.891 mas, bpa=1.983 degrees ! Estimated noise=1285.83 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.06198e-05 Jy ! Component: 100 - total flux cleaned = 1.70765e-05 Jy ! Component: 150 - total flux cleaned = 2.41346e-06 Jy ! Component: 200 - total flux cleaned = 2.86388e-06 Jy ! Total flux subtracted in 200 components = 2.86388e-06 Jy ! Clean residual min=-0.002744 max=0.002753 Jy/beam ! Clean residual mean=0.000005 rms=0.000633 Jy/beam ! Combined flux in latest and established models = 0.0742346 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 32 components and 0.0742346 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100120Jy sigma=0.000618 ! Fit after self-cal, rms=0.100175Jy sigma=0.000618 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (116, -71). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00182052 Jy ! Component: 100 - total flux cleaned = 0.00181326 Jy ! Component: 150 - total flux cleaned = 0.00177543 Jy ! Component: 200 - total flux cleaned = 0.00186798 Jy ! Total flux subtracted in 200 components = 0.00186798 Jy ! Clean residual min=-0.002575 max=0.002182 Jy/beam ! Clean residual mean=-0.000004 rms=0.000579 Jy/beam ! Combined flux in latest and established models = 0.0761026 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 47 components and 0.0761026 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100108Jy sigma=0.000617 ! Fit after self-cal, rms=0.100104Jy sigma=0.000617 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100104Jy sigma=0.000617 ! Fit after self-cal, rms=0.100130Jy sigma=0.000617 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.41 mas, bmaj=29.77 mas, bpa=3.165 degrees ! Estimated noise=1677.68 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000944891 Jy ! Component: 100 - total flux cleaned = 0.00132997 Jy ! Component: 150 - total flux cleaned = 0.00139243 Jy ! Component: 200 - total flux cleaned = 0.00138322 Jy ! Total flux subtracted in 200 components = 0.00138322 Jy ! Clean residual min=-0.002542 max=0.002721 Jy/beam ! Clean residual mean=-0.000010 rms=0.000685 Jy/beam ! Combined flux in latest and established models = 0.0774858 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 53 components and 0.0774858 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100118Jy sigma=0.000617 ! Fit after self-cal, rms=0.100140Jy sigma=0.000617 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000560493 Jy ! Component: 100 - total flux cleaned = 0.000701895 Jy ! Component: 150 - total flux cleaned = 0.00069326 Jy ! Component: 200 - total flux cleaned = 0.000677836 Jy ! Total flux subtracted in 200 components = 0.000677836 Jy ! Clean residual min=-0.002486 max=0.002710 Jy/beam ! Clean residual mean=-0.000010 rms=0.000678 Jy/beam ! Combined flux in latest and established models = 0.0781636 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 56 components and 0.0781636 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100133Jy sigma=0.000617 ! Fit after self-cal, rms=0.100135Jy sigma=0.000617 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.991 mas, bmaj=7.893 mas, bpa=1.961 degrees ! Estimated noise=1282.75 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.991 x 7.893 at 1.961 degrees (North through East) ! Clean map min=-0.0025179 max=0.071233 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.291 mas, bmaj=6.18 mas, bpa=-2.058 degrees ! Estimated noise=1945.69 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0554124 Jy ! Component: 100 - total flux cleaned = 0.0681759 Jy ! Component: 150 - total flux cleaned = 0.073838 Jy ! Component: 200 - total flux cleaned = 0.0755127 Jy ! Total flux subtracted in 200 components = 0.0755127 Jy ! Clean residual min=-0.003765 max=0.003479 Jy/beam ! Clean residual mean=-0.000003 rms=0.000921 Jy/beam ! Combined flux in latest and established models = 0.0755128 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.0755128 Jy ! Inverting map and beam ! Estimated beam: bmin=2.991 mas, bmaj=7.893 mas, bpa=1.961 degrees ! Estimated noise=1282.75 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00203044 Jy ! Component: 100 - total flux cleaned = 0.00221887 Jy ! Component: 150 - total flux cleaned = 0.0022725 Jy ! Component: 200 - total flux cleaned = 0.00231964 Jy ! Total flux subtracted in 200 components = 0.00231964 Jy ! Clean residual min=-0.002699 max=0.002315 Jy/beam ! Clean residual mean=-0.000006 rms=0.000609 Jy/beam ! Combined flux in latest and established models = 0.0778324 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 25 components and 0.0778324 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.41 mas, bmaj=29.77 mas, bpa=3.165 degrees ! Estimated noise=1677.68 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000466021 Jy ! Component: 100 - total flux cleaned = 0.00052275 Jy ! Component: 150 - total flux cleaned = 0.000535037 Jy ! Component: 200 - total flux cleaned = 0.000546328 Jy ! Total flux subtracted in 200 components = 0.000546328 Jy ! Clean residual min=-0.002413 max=0.002681 Jy/beam ! Clean residual mean=-0.000010 rms=0.000675 Jy/beam ! Combined flux in latest and established models = 0.0783787 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.13536e-07 Jy ! Component: 100 - total flux cleaned = 8.90235e-06 Jy ! Component: 150 - total flux cleaned = 8.13189e-06 Jy ! Component: 200 - total flux cleaned = -1.60309e-07 Jy ! Total flux subtracted in 200 components = -1.60309e-07 Jy ! Clean residual min=-0.002385 max=0.002697 Jy/beam ! Clean residual mean=-0.000010 rms=0.000672 Jy/beam ! Combined flux in latest and established models = 0.0783786 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 34 components and 0.0783786 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.991 mas, bmaj=7.893 mas, bpa=1.961 degrees ! Estimated noise=1282.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000306553 Jy ! Component: 100 - total flux cleaned = -0.00031053 Jy ! Component: 150 - total flux cleaned = -0.000310898 Jy ! Component: 200 - total flux cleaned = -0.000310614 Jy ! Total flux subtracted in 200 components = -0.000310614 Jy ! Clean residual min=-0.002631 max=0.002232 Jy/beam ! Clean residual mean=-0.000005 rms=0.000585 Jy/beam ! Combined flux in latest and established models = 0.0780679 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 44 components and 0.078068 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100145Jy sigma=0.000617 ! Fit after self-cal, rms=0.100138Jy sigma=0.000617 wmodel J1114-3652_S_2017_08_12_pus_map.mod ! Writing 44 model components to file: J1114-3652_S_2017_08_12_pus_map.mod wobs J1114-3652_S_2017_08_12_pus_uvs.fits ! Writing UV FITS file: J1114-3652_S_2017_08_12_pus_uvs.fits wwins J1114-3652_S_2017_08_12_pus_map.win ! wwins: Wrote 2 windows to J1114-3652_S_2017_08_12_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000542647 Jy ! Component: 100 - total flux cleaned = -0.000695488 Jy ! Component: 150 - total flux cleaned = -0.000519636 Jy ! Component: 200 - total flux cleaned = -0.00038571 Jy ! Component: 250 - total flux cleaned = -0.000353743 Jy ! Component: 300 - total flux cleaned = -0.000474823 Jy ! Component: 350 - total flux cleaned = -0.000532759 Jy ! Component: 400 - total flux cleaned = -0.00053321 Jy ! Component: 450 - total flux cleaned = -0.000588303 Jy ! Component: 500 - total flux cleaned = -0.000482254 Jy ! Component: 550 - total flux cleaned = -0.00037943 Jy ! Component: 600 - total flux cleaned = -0.000152048 Jy ! Component: 650 - total flux cleaned = -4.45096e-06 Jy ! Component: 700 - total flux cleaned = 0.000116337 Jy ! Component: 750 - total flux cleaned = 0.000234034 Jy ! Component: 800 - total flux cleaned = 0.000303722 Jy ! Component: 850 - total flux cleaned = 0.000417246 Jy ! Component: 900 - total flux cleaned = 0.000572325 Jy ! Component: 950 - total flux cleaned = 0.000593606 Jy ! Component: 1000 - total flux cleaned = 0.000594354 Jy ! Component: 1050 - total flux cleaned = 0.000699413 Jy ! Component: 1100 - total flux cleaned = 0.000740957 Jy ! Component: 1150 - total flux cleaned = 0.000761599 Jy ! Component: 1200 - total flux cleaned = 0.000841341 Jy ! Component: 1250 - total flux cleaned = 0.000899691 Jy ! Component: 1300 - total flux cleaned = 0.000918751 Jy ! Component: 1350 - total flux cleaned = 0.000956422 Jy ! Component: 1400 - total flux cleaned = 0.00101211 Jy ! Component: 1450 - total flux cleaned = 0.00103014 Jy ! Component: 1500 - total flux cleaned = 0.00104798 Jy ! Component: 1550 - total flux cleaned = 0.0011012 Jy ! Component: 1600 - total flux cleaned = 0.00113588 Jy ! Component: 1650 - total flux cleaned = 0.00117039 Jy ! Component: 1700 - total flux cleaned = 0.00113634 Jy ! Component: 1750 - total flux cleaned = 0.00117006 Jy ! Component: 1800 - total flux cleaned = 0.00118626 Jy ! Component: 1850 - total flux cleaned = 0.00115357 Jy ! Component: 1900 - total flux cleaned = 0.00112155 Jy ! Component: 1950 - total flux cleaned = 0.00105769 Jy ! Component: 2000 - total flux cleaned = 0.00102625 Jy ! Component: 2050 - total flux cleaned = 0.00101042 Jy ! Component: 2100 - total flux cleaned = 0.000933019 Jy ! Component: 2150 - total flux cleaned = 0.000902381 Jy ! Component: 2200 - total flux cleaned = 0.000872022 Jy ! Component: 2250 - total flux cleaned = 0.000812243 Jy ! Component: 2300 - total flux cleaned = 0.00082722 Jy ! Component: 2350 - total flux cleaned = 0.000827201 Jy ! Component: 2400 - total flux cleaned = 0.000768846 Jy ! Component: 2450 - total flux cleaned = 0.000797682 Jy ! Component: 2500 - total flux cleaned = 0.000797502 Jy ! Component: 2550 - total flux cleaned = 0.000797474 Jy ! Component: 2600 - total flux cleaned = 0.000825675 Jy ! Component: 2650 - total flux cleaned = 0.00083961 Jy ! Component: 2700 - total flux cleaned = 0.000797868 Jy ! Component: 2750 - total flux cleaned = 0.00079799 Jy ! Component: 2800 - total flux cleaned = 0.00077063 Jy ! Component: 2850 - total flux cleaned = 0.000757042 Jy ! Component: 2900 - total flux cleaned = 0.000743457 Jy ! Component: 2950 - total flux cleaned = 0.000729994 Jy ! Component: 3000 - total flux cleaned = 0.000729929 Jy ! Component: 3050 - total flux cleaned = 0.000716628 Jy ! Component: 3100 - total flux cleaned = 0.000756528 Jy ! Component: 3150 - total flux cleaned = 0.00074325 Jy ! Component: 3200 - total flux cleaned = 0.000756449 Jy ! Component: 3250 - total flux cleaned = 0.000743433 Jy ! Component: 3300 - total flux cleaned = 0.000808702 Jy ! Component: 3350 - total flux cleaned = 0.00079568 Jy ! Component: 3400 - total flux cleaned = 0.000860364 Jy ! Component: 3450 - total flux cleaned = 0.000847506 Jy ! Component: 3500 - total flux cleaned = 0.000873166 Jy ! Component: 3550 - total flux cleaned = 0.000873245 Jy ! Component: 3600 - total flux cleaned = 0.000898796 Jy ! Component: 3650 - total flux cleaned = 0.000924181 Jy ! Component: 3700 - total flux cleaned = 0.000949483 Jy ! Component: 3750 - total flux cleaned = 0.000962115 Jy ! Component: 3800 - total flux cleaned = 0.000974728 Jy ! Component: 3850 - total flux cleaned = 0.000974731 Jy ! Component: 3900 - total flux cleaned = 0.00103709 Jy ! Component: 3950 - total flux cleaned = 0.000999811 Jy ! Component: 4000 - total flux cleaned = 0.000987482 Jy ! Component: 4050 - total flux cleaned = 0.00101228 Jy ! Total flux subtracted in 4096 components = 0.00102463 Jy ! Clean residual min=-0.000672 max=0.000675 Jy/beam ! Clean residual mean=-0.000004 rms=0.000207 Jy/beam ! Combined flux in latest and established models = 0.0790926 Jy keep ! Adding 213 model components to the UV plane model. ! The established model now contains 257 components and 0.0790926 Jy ![Exited script file: muppet] wmap "J1114-3652_S_2017_08_12_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.991 x 7.893 at 1.961 degrees (North through East) ! Clean map min=-0.0014936 max=0.071894 Jy/beam ! Writing clean map to FITS file: J1114-3652_S_2017_08_12_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0718944 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000210073 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.87659 0.87659 1.75318 3.50636 7.01272 14.0254 28.0509 56.1018 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.071 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.991 x 7.893 at 1.961 degrees (North through East) ! Clean map min=-0.0014936 max=0.071894 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1114-3652_S_2017_08_12_pus_uvs.log closed on Fri May 10 14:58:38 2019