! Started logfile: J1113-3549_S_2017_08_05_pus_uvs.log on Thu May 9 19:28:16 2019 obs J1113-3549_S_2017_08_05_pus_uva.fits ! Reading UV FITS file: J1113-3549_S_2017_08_05_pus_uva.fits ! AN table 1: 116 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.597318 visibilities/baseline/integration-bin. ! Found source: J1113-3549 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 513 lines of history. ! ! Reading 12472 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1113-3549_S_2017_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 360 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 302 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 360 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 830 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.869543Jy sigma=0.005545 ! Fit after self-cal, rms=0.838799Jy sigma=0.005353 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.334 mas, bmaj=6.4 mas, bpa=-4.925 degrees ! Estimated noise=2174.06 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.123068 Jy ! Component: 100 - total flux cleaned = 0.158775 Jy ! Total flux subtracted in 100 components = 0.158775 Jy ! Clean residual min=-0.007905 max=0.016180 Jy/beam ! Clean residual mean=-0.000159 rms=0.002619 Jy/beam ! Combined flux in latest and established models = 0.158775 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.158775 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112968Jy sigma=0.000699 ! Fit after self-cal, rms=0.112970Jy sigma=0.000699 ! Inverting map ! Added new window around map position (-2.5, -8.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0172326 Jy ! Component: 100 - total flux cleaned = 0.0280539 Jy ! Total flux subtracted in 100 components = 0.0280539 Jy ! Clean residual min=-0.006591 max=0.010474 Jy/beam ! Clean residual mean=-0.000106 rms=0.001906 Jy/beam ! Combined flux in latest and established models = 0.186829 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 34 components and 0.186829 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108842Jy sigma=0.000667 ! Fit after self-cal, rms=0.108808Jy sigma=0.000667 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.812 mas, bmaj=7.336 mas, bpa=-5.343 degrees ! Estimated noise=1254.56 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4.5, 9). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0155044 Jy ! Component: 100 - total flux cleaned = 0.024653 Jy ! Component: 150 - total flux cleaned = 0.0304264 Jy ! Component: 200 - total flux cleaned = 0.0342265 Jy ! Total flux subtracted in 200 components = 0.0342265 Jy ! Clean residual min=-0.004323 max=0.004775 Jy/beam ! Clean residual mean=-0.000057 rms=0.001084 Jy/beam ! Combined flux in latest and established models = 0.221056 Jy ! Performing phase self-cal ! Adding 76 model components to the UV plane model. ! The established model now contains 104 components and 0.221056 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106483Jy sigma=0.000651 ! Fit after self-cal, rms=0.106454Jy sigma=0.000650 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.95 HN 1.00* KP 1.02 ! LA 0.98 MK 1.02 NL 1.00* OV 1.02 ! PT 1.00 SC 0.96 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 1.00* KP 1.00 ! LA 0.98 MK 0.99 NL 0.98 OV 1.06 ! PT 0.96 SC 1.03 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 1.00* KP 0.85 ! LA 1.00* MK 1.02 NL 1.24 OV 0.95 ! PT 0.94 SC 1.04 ! ! ! Correcting IF 4. ! A total of 330 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.106454Jy sigma=0.000650 ! Fit after self-cal, rms=0.107549Jy sigma=0.000649 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.845 mas, bmaj=7.433 mas, bpa=-3.85 degrees ! Estimated noise=1286.18 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000291908 Jy ! Component: 100 - total flux cleaned = 0.000340126 Jy ! Component: 150 - total flux cleaned = 0.000266519 Jy ! Component: 200 - total flux cleaned = 0.000266143 Jy ! Total flux subtracted in 200 components = 0.000266143 Jy ! Clean residual min=-0.003431 max=0.003738 Jy/beam ! Clean residual mean=-0.000041 rms=0.000858 Jy/beam ! Combined flux in latest and established models = 0.221322 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 119 components and 0.221322 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107507Jy sigma=0.000649 ! Fit after self-cal, rms=0.107546Jy sigma=0.000649 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107546Jy sigma=0.000649 ! Fit after self-cal, rms=0.107487Jy sigma=0.000649 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.842 mas, bmaj=7.429 mas, bpa=-3.828 degrees ! Estimated noise=1283.69 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000230321 Jy ! Component: 100 - total flux cleaned = -0.000197507 Jy ! Component: 150 - total flux cleaned = -0.000226749 Jy ! Component: 200 - total flux cleaned = -0.000225544 Jy ! Total flux subtracted in 200 components = -0.000225544 Jy ! Clean residual min=-0.003322 max=0.003646 Jy/beam ! Clean residual mean=-0.000040 rms=0.000838 Jy/beam ! Combined flux in latest and established models = 0.221096 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 131 components and 0.221096 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107464Jy sigma=0.000648 ! Fit after self-cal, rms=0.107457Jy sigma=0.000648 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.80951e-06 Jy ! Component: 100 - total flux cleaned = 5.3045e-05 Jy ! Component: 150 - total flux cleaned = 0.000101278 Jy ! Component: 200 - total flux cleaned = 0.000122558 Jy ! Total flux subtracted in 200 components = 0.000122558 Jy ! Clean residual min=-0.003297 max=0.003585 Jy/beam ! Clean residual mean=-0.000040 rms=0.000827 Jy/beam ! Combined flux in latest and established models = 0.221219 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 140 components and 0.221219 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107444Jy sigma=0.000648 ! Fit after self-cal, rms=0.107437Jy sigma=0.000648 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107437Jy sigma=0.000648 ! Fit after self-cal, rms=0.107848Jy sigma=0.000647 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.843 mas, bmaj=7.424 mas, bpa=-3.832 degrees ! Estimated noise=1281.48 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000101386 Jy ! Component: 100 - total flux cleaned = 0.000106168 Jy ! Component: 150 - total flux cleaned = 4.81151e-05 Jy ! Component: 200 - total flux cleaned = -3.81232e-06 Jy ! Total flux subtracted in 200 components = -3.81232e-06 Jy ! Clean residual min=-0.003016 max=0.003187 Jy/beam ! Clean residual mean=-0.000027 rms=0.000766 Jy/beam ! Combined flux in latest and established models = 0.221215 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 157 components and 0.221215 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107839Jy sigma=0.000647 ! Fit after self-cal, rms=0.107852Jy sigma=0.000647 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.53103e-05 Jy ! Component: 100 - total flux cleaned = 5.26519e-06 Jy ! Component: 150 - total flux cleaned = -9.81913e-06 Jy ! Component: 200 - total flux cleaned = -3.81666e-05 Jy ! Total flux subtracted in 200 components = -3.81666e-05 Jy ! Clean residual min=-0.003007 max=0.003170 Jy/beam ! Clean residual mean=-0.000028 rms=0.000762 Jy/beam ! Combined flux in latest and established models = 0.221177 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 167 components and 0.221177 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107847Jy sigma=0.000647 ! Fit after self-cal, rms=0.107844Jy sigma=0.000647 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107844Jy sigma=0.000647 ! Fit after self-cal, rms=0.107897Jy sigma=0.000647 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.963 mas, bmaj=24.66 mas, bpa=-2.305 degrees ! Estimated noise=1701.57 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00020051 Jy ! Component: 100 - total flux cleaned = -0.00019723 Jy ! Component: 150 - total flux cleaned = -0.000177547 Jy ! Component: 200 - total flux cleaned = -0.000177607 Jy ! Total flux subtracted in 200 components = -0.000177607 Jy ! Clean residual min=-0.002763 max=0.002986 Jy/beam ! Clean residual mean=-0.000062 rms=0.000971 Jy/beam ! Combined flux in latest and established models = 0.220999 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 170 components and 0.220999 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107899Jy sigma=0.000647 ! Fit after self-cal, rms=0.107895Jy sigma=0.000647 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.87178e-06 Jy ! Component: 100 - total flux cleaned = 2.58938e-06 Jy ! Component: 150 - total flux cleaned = 3.79924e-06 Jy ! Component: 200 - total flux cleaned = 4.25626e-06 Jy ! Total flux subtracted in 200 components = 4.25626e-06 Jy ! Clean residual min=-0.002756 max=0.002962 Jy/beam ! Clean residual mean=-0.000062 rms=0.000968 Jy/beam ! Combined flux in latest and established models = 0.221003 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 172 components and 0.221003 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107898Jy sigma=0.000647 ! Fit after self-cal, rms=0.107894Jy sigma=0.000647 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.842 mas, bmaj=7.421 mas, bpa=-3.829 degrees ! Estimated noise=1281.42 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.842 x 7.421 at -3.829 degrees (North through East) ! Clean map min=-0.0028346 max=0.15056 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.359 mas, bmaj=6.486 mas, bpa=-3.136 degrees ! Estimated noise=2254.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.124878 Jy ! Component: 100 - total flux cleaned = 0.16117 Jy ! Component: 150 - total flux cleaned = 0.179235 Jy ! Component: 200 - total flux cleaned = 0.191289 Jy ! Total flux subtracted in 200 components = 0.191289 Jy ! Clean residual min=-0.005893 max=0.007210 Jy/beam ! Clean residual mean=-0.000081 rms=0.001621 Jy/beam ! Combined flux in latest and established models = 0.191289 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 45 model components to the UV plane model. ! The established model now contains 45 components and 0.191289 Jy ! Inverting map and beam ! Estimated beam: bmin=2.842 mas, bmaj=7.421 mas, bpa=-3.829 degrees ! Estimated noise=1281.42 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0118055 Jy ! Component: 100 - total flux cleaned = 0.0182174 Jy ! Component: 150 - total flux cleaned = 0.0220931 Jy ! Component: 200 - total flux cleaned = 0.0245451 Jy ! Total flux subtracted in 200 components = 0.0245451 Jy ! Clean residual min=-0.003158 max=0.002832 Jy/beam ! Clean residual mean=-0.000044 rms=0.000790 Jy/beam ! Combined flux in latest and established models = 0.215834 Jy ! Adding 78 model components to the UV plane model. ! The established model now contains 111 components and 0.215834 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.963 mas, bmaj=24.66 mas, bpa=-2.305 degrees ! Estimated noise=1701.57 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00272549 Jy ! Component: 100 - total flux cleaned = 0.00400324 Jy ! Component: 150 - total flux cleaned = 0.0045738 Jy ! Component: 200 - total flux cleaned = 0.0046454 Jy ! Total flux subtracted in 200 components = 0.0046454 Jy ! Clean residual min=-0.002853 max=0.002871 Jy/beam ! Clean residual mean=-0.000065 rms=0.000966 Jy/beam ! Combined flux in latest and established models = 0.22048 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.40044e-05 Jy ! Component: 100 - total flux cleaned = 0.000122377 Jy ! Component: 150 - total flux cleaned = 0.000175725 Jy ! Component: 200 - total flux cleaned = 0.000200323 Jy ! Total flux subtracted in 200 components = 0.000200323 Jy ! Clean residual min=-0.002837 max=0.002898 Jy/beam ! Clean residual mean=-0.000064 rms=0.000962 Jy/beam ! Combined flux in latest and established models = 0.22068 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 124 components and 0.22068 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.842 mas, bmaj=7.421 mas, bpa=-3.829 degrees ! Estimated noise=1281.42 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000324063 Jy ! Component: 100 - total flux cleaned = -0.00031936 Jy ! Component: 150 - total flux cleaned = -0.000248584 Jy ! Component: 200 - total flux cleaned = -0.000189799 Jy ! Total flux subtracted in 200 components = -0.000189799 Jy ! Clean residual min=-0.002906 max=0.003085 Jy/beam ! Clean residual mean=-0.000030 rms=0.000749 Jy/beam ! Combined flux in latest and established models = 0.22049 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 138 components and 0.22049 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107897Jy sigma=0.000647 ! Fit after self-cal, rms=0.107884Jy sigma=0.000647 wmodel J1113-3549_S_2017_08_05_pus_map.mod ! Writing 138 model components to file: J1113-3549_S_2017_08_05_pus_map.mod wobs J1113-3549_S_2017_08_05_pus_uvs.fits ! Writing UV FITS file: J1113-3549_S_2017_08_05_pus_uvs.fits wwins J1113-3549_S_2017_08_05_pus_map.win ! wwins: Wrote 3 windows to J1113-3549_S_2017_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000151005 Jy ! Component: 100 - total flux cleaned = -0.000658629 Jy ! Component: 150 - total flux cleaned = -0.00122593 Jy ! Component: 200 - total flux cleaned = -0.00193764 Jy ! Component: 250 - total flux cleaned = -0.00244386 Jy ! Component: 300 - total flux cleaned = -0.00284618 Jy ! Component: 350 - total flux cleaned = -0.00319448 Jy ! Component: 400 - total flux cleaned = -0.00338252 Jy ! Component: 450 - total flux cleaned = -0.00360007 Jy ! Component: 500 - total flux cleaned = -0.0038102 Jy ! Component: 550 - total flux cleaned = -0.00398053 Jy ! Component: 600 - total flux cleaned = -0.0042477 Jy ! Component: 650 - total flux cleaned = -0.00444318 Jy ! Component: 700 - total flux cleaned = -0.00476215 Jy ! Component: 750 - total flux cleaned = -0.00507405 Jy ! Component: 800 - total flux cleaned = -0.00528766 Jy ! Component: 850 - total flux cleaned = -0.00546671 Jy ! Component: 900 - total flux cleaned = -0.00570136 Jy ! Component: 950 - total flux cleaned = -0.0059028 Jy ! Component: 1000 - total flux cleaned = -0.00610036 Jy ! Component: 1050 - total flux cleaned = -0.00626638 Jy ! Component: 1100 - total flux cleaned = -0.0064831 Jy ! Component: 1150 - total flux cleaned = -0.00656308 Jy ! Component: 1200 - total flux cleaned = -0.00669449 Jy ! Component: 1250 - total flux cleaned = -0.00682377 Jy ! Component: 1300 - total flux cleaned = -0.00702615 Jy ! Component: 1350 - total flux cleaned = -0.00717482 Jy ! Component: 1400 - total flux cleaned = -0.0072971 Jy ! Component: 1450 - total flux cleaned = -0.0074412 Jy ! Component: 1500 - total flux cleaned = -0.00763003 Jy ! Component: 1550 - total flux cleaned = -0.00769983 Jy ! Component: 1600 - total flux cleaned = -0.00786027 Jy ! Component: 1650 - total flux cleaned = -0.00803973 Jy ! Component: 1700 - total flux cleaned = -0.00810604 Jy ! Component: 1750 - total flux cleaned = -0.00823671 Jy ! Component: 1800 - total flux cleaned = -0.00832312 Jy ! Component: 1850 - total flux cleaned = -0.00847104 Jy ! Component: 1900 - total flux cleaned = -0.00857533 Jy ! Component: 1950 - total flux cleaned = -0.00871953 Jy ! Component: 2000 - total flux cleaned = -0.00886135 Jy ! Component: 2050 - total flux cleaned = -0.00894119 Jy ! Component: 2100 - total flux cleaned = -0.00905982 Jy ! Component: 2150 - total flux cleaned = -0.00917674 Jy ! Component: 2200 - total flux cleaned = -0.00931084 Jy ! Component: 2250 - total flux cleaned = -0.00931109 Jy ! Component: 2300 - total flux cleaned = -0.00944192 Jy ! Component: 2350 - total flux cleaned = -0.00953373 Jy ! Component: 2400 - total flux cleaned = -0.00964287 Jy ! Component: 2450 - total flux cleaned = -0.00973254 Jy ! Component: 2500 - total flux cleaned = -0.00978587 Jy ! Component: 2550 - total flux cleaned = -0.00990817 Jy ! Component: 2600 - total flux cleaned = -0.0100463 Jy ! Component: 2650 - total flux cleaned = -0.0101485 Jy ! Component: 2700 - total flux cleaned = -0.0101653 Jy ! Component: 2750 - total flux cleaned = -0.0102654 Jy ! Component: 2800 - total flux cleaned = -0.0103315 Jy ! Component: 2850 - total flux cleaned = -0.0103963 Jy ! Component: 2900 - total flux cleaned = -0.0104446 Jy ! Component: 2950 - total flux cleaned = -0.0105404 Jy ! Component: 3000 - total flux cleaned = -0.0105717 Jy ! Component: 3050 - total flux cleaned = -0.0106345 Jy ! Component: 3100 - total flux cleaned = -0.0107123 Jy ! Component: 3150 - total flux cleaned = -0.0108664 Jy ! Component: 3200 - total flux cleaned = -0.0109273 Jy ! Component: 3250 - total flux cleaned = -0.0109877 Jy ! Component: 3300 - total flux cleaned = -0.011048 Jy ! Component: 3350 - total flux cleaned = -0.0111226 Jy ! Component: 3400 - total flux cleaned = -0.0111966 Jy ! Component: 3450 - total flux cleaned = -0.0112259 Jy ! Component: 3500 - total flux cleaned = -0.0112991 Jy ! Component: 3550 - total flux cleaned = -0.011357 Jy ! Component: 3600 - total flux cleaned = -0.0113859 Jy ! Component: 3650 - total flux cleaned = -0.0114145 Jy ! Component: 3700 - total flux cleaned = -0.0114855 Jy ! Component: 3750 - total flux cleaned = -0.0115276 Jy ! Component: 3800 - total flux cleaned = -0.0114996 Jy ! Component: 3850 - total flux cleaned = -0.0115832 Jy ! Component: 3900 - total flux cleaned = -0.0115832 Jy ! Component: 3950 - total flux cleaned = -0.0116244 Jy ! Component: 4000 - total flux cleaned = -0.0116378 Jy ! Component: 4050 - total flux cleaned = -0.0116919 Jy ! Total flux subtracted in 4096 components = -0.0117052 Jy ! Clean residual min=-0.000877 max=0.000788 Jy/beam ! Clean residual mean=-0.000006 rms=0.000227 Jy/beam ! Combined flux in latest and established models = 0.208785 Jy keep ! Adding 246 model components to the UV plane model. ! The established model now contains 384 components and 0.208785 Jy ![Exited script file: muppet] wmap "J1113-3549_S_2017_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.842 x 7.421 at -3.829 degrees (North through East) ! Clean map min=-0.0020656 max=0.15061 Jy/beam ! Writing clean map to FITS file: J1113-3549_S_2017_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.150608 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000217811 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.433864 0.433864 0.867729 1.73546 3.47092 6.94183 13.8837 27.7673 55.5346 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.15 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.842 x 7.421 at -3.829 degrees (North through East) ! Clean map min=-0.0020656 max=0.15061 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1113-3549_S_2017_08_05_pus_uvs.log closed on Thu May 9 19:28:22 2019