! Started logfile: J1113+1442_S_2017_10_09_pus_uvs.log on Sun May 12 13:10:41 2019 obs J1113+1442_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J1113+1442_S_2017_10_09_pus_uva.fits ! AN table 1: 20 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.654167 visibilities/baseline/integration-bin. ! Found source: J1113+1442 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 1884 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1113+1442_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 34 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 44 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 34 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 119 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.585905Jy sigma=0.005320 ! Fit after self-cal, rms=0.579690Jy sigma=0.005267 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.883 mas, bmaj=10.4 mas, bpa=-20.41 degrees ! Estimated noise=2411.86 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.322158 Jy ! Component: 100 - total flux cleaned = 0.393009 Jy ! Total flux subtracted in 100 components = 0.393009 Jy ! Clean residual min=-0.014182 max=0.022639 Jy/beam ! Clean residual mean=-0.000067 rms=0.004532 Jy/beam ! Combined flux in latest and established models = 0.393009 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.393009 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122095Jy sigma=0.000890 ! Fit after self-cal, rms=0.122094Jy sigma=0.000890 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.466 mas, bmaj=10.46 mas, bpa=-20.55 degrees ! Estimated noise=2147.01 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0274808 Jy ! Component: 100 - total flux cleaned = 0.0406217 Jy ! Component: 150 - total flux cleaned = 0.0488489 Jy ! Component: 200 - total flux cleaned = 0.0543852 Jy ! Total flux subtracted in 200 components = 0.0543852 Jy ! Clean residual min=-0.012789 max=0.014148 Jy/beam ! Clean residual mean=-0.000026 rms=0.003436 Jy/beam ! Combined flux in latest and established models = 0.447394 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 35 components and 0.447394 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113142Jy sigma=0.000846 ! Fit after self-cal, rms=0.113093Jy sigma=0.000845 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.03 HN 1.00 KP 1.06 ! LA 1.03 MK 0.96 NL 0.94 OV 1.00* ! PT 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.09 HN 1.04 KP 1.05 ! LA 0.99 MK 0.97 NL 0.63 OV 1.00* ! PT 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.07 HN 1.02 KP 0.90 ! LA 0.79 MK 1.02 NL 1.20 OV 1.00* ! PT 0.96 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.35 HN 0.98 KP 1.00* ! LA 1.00* MK 1.30 NL 1.00* OV 1.00* ! PT 1.03 ! ! ! Fit before self-cal, rms=0.113093Jy sigma=0.000845 ! Fit after self-cal, rms=0.082404Jy sigma=0.000681 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.505 mas, bmaj=10.42 mas, bpa=-20.78 degrees ! Estimated noise=2146.19 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00263839 Jy ! Component: 100 - total flux cleaned = 0.00211882 Jy ! Component: 150 - total flux cleaned = 0.0018342 Jy ! Component: 200 - total flux cleaned = 0.00168543 Jy ! Total flux subtracted in 200 components = 0.00168543 Jy ! Clean residual min=-0.007411 max=0.007345 Jy/beam ! Clean residual mean=0.000000 rms=0.001949 Jy/beam ! Combined flux in latest and established models = 0.449079 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 50 components and 0.449079 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081901Jy sigma=0.000677 ! Fit after self-cal, rms=0.081888Jy sigma=0.000676 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081888Jy sigma=0.000676 ! Fit after self-cal, rms=0.078459Jy sigma=0.000650 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.513 mas, bmaj=10.39 mas, bpa=-20.74 degrees ! Estimated noise=2149.08 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00249658 Jy ! Component: 100 - total flux cleaned = 0.00280123 Jy ! Component: 150 - total flux cleaned = 0.00289807 Jy ! Component: 200 - total flux cleaned = 0.00289701 Jy ! Total flux subtracted in 200 components = 0.00289701 Jy ! Clean residual min=-0.004531 max=0.005032 Jy/beam ! Clean residual mean=-0.000003 rms=0.001140 Jy/beam ! Combined flux in latest and established models = 0.451976 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 72 components and 0.451976 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078340Jy sigma=0.000649 ! Fit after self-cal, rms=0.078346Jy sigma=0.000649 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3, 120.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00423524 Jy ! Component: 100 - total flux cleaned = 0.00503581 Jy ! Component: 150 - total flux cleaned = 0.00504166 Jy ! Component: 200 - total flux cleaned = 0.00497711 Jy ! Total flux subtracted in 200 components = 0.00497711 Jy ! Clean residual min=-0.004314 max=0.004387 Jy/beam ! Clean residual mean=-0.000003 rms=0.001022 Jy/beam ! Combined flux in latest and established models = 0.456953 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 92 components and 0.456953 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078081Jy sigma=0.000646 ! Fit after self-cal, rms=0.078070Jy sigma=0.000646 ! Inverting map ! Added new window around map position (-6.5, -35.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00295059 Jy ! Component: 100 - total flux cleaned = 0.00389035 Jy ! Component: 150 - total flux cleaned = 0.00421362 Jy ! Component: 200 - total flux cleaned = 0.00428422 Jy ! Total flux subtracted in 200 components = 0.00428422 Jy ! Clean residual min=-0.003887 max=0.003215 Jy/beam ! Clean residual mean=-0.000003 rms=0.000866 Jy/beam ! Combined flux in latest and established models = 0.461238 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 114 components and 0.461238 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077794Jy sigma=0.000643 ! Fit after self-cal, rms=0.077781Jy sigma=0.000643 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077781Jy sigma=0.000643 ! Fit after self-cal, rms=0.077649Jy sigma=0.000643 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.517 mas, bmaj=10.38 mas, bpa=-20.76 degrees ! Estimated noise=2147.66 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00112352 Jy ! Component: 100 - total flux cleaned = 0.00138051 Jy ! Component: 150 - total flux cleaned = 0.00160777 Jy ! Component: 200 - total flux cleaned = 0.00171728 Jy ! Total flux subtracted in 200 components = 0.00171728 Jy ! Clean residual min=-0.003554 max=0.003173 Jy/beam ! Clean residual mean=-0.000003 rms=0.000790 Jy/beam ! Combined flux in latest and established models = 0.462955 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 132 components and 0.462955 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077562Jy sigma=0.000642 ! Fit after self-cal, rms=0.077560Jy sigma=0.000642 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000377239 Jy ! Component: 100 - total flux cleaned = 0.000330976 Jy ! Component: 150 - total flux cleaned = 0.000332249 Jy ! Component: 200 - total flux cleaned = 0.000333671 Jy ! Total flux subtracted in 200 components = 0.000333671 Jy ! Clean residual min=-0.003442 max=0.003059 Jy/beam ! Clean residual mean=-0.000003 rms=0.000769 Jy/beam ! Combined flux in latest and established models = 0.463289 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 143 components and 0.463289 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077512Jy sigma=0.000642 ! Fit after self-cal, rms=0.077511Jy sigma=0.000642 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077511Jy sigma=0.000642 ! Fit after self-cal, rms=0.077535Jy sigma=0.000642 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.846 mas, bmaj=11.17 mas, bpa=-18.97 degrees ! Estimated noise=2649.66 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.1618e-05 Jy ! Component: 100 - total flux cleaned = -2.4856e-05 Jy ! Component: 150 - total flux cleaned = -2.28803e-05 Jy ! Component: 200 - total flux cleaned = -2.19973e-05 Jy ! Total flux subtracted in 200 components = -2.19973e-05 Jy ! Clean residual min=-0.003088 max=0.003296 Jy/beam ! Clean residual mean=-0.000006 rms=0.000810 Jy/beam ! Combined flux in latest and established models = 0.463267 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 168 components and 0.463267 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077510Jy sigma=0.000641 ! Fit after self-cal, rms=0.077510Jy sigma=0.000641 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.97229e-05 Jy ! Component: 100 - total flux cleaned = 4.03458e-05 Jy ! Component: 150 - total flux cleaned = -1.97127e-05 Jy ! Component: 200 - total flux cleaned = -7.58437e-05 Jy ! Total flux subtracted in 200 components = -7.58437e-05 Jy ! Clean residual min=-0.003100 max=0.003340 Jy/beam ! Clean residual mean=-0.000006 rms=0.000798 Jy/beam ! Combined flux in latest and established models = 0.463191 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 184 components and 0.463191 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077495Jy sigma=0.000641 ! Fit after self-cal, rms=0.077494Jy sigma=0.000641 ! Inverting map ! Added new window around map position (29.5, -119). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00227032 Jy ! Component: 100 - total flux cleaned = 0.00233896 Jy ! Component: 150 - total flux cleaned = 0.00214181 Jy ! Component: 200 - total flux cleaned = 0.00187692 Jy ! Total flux subtracted in 200 components = 0.00187692 Jy ! Clean residual min=-0.003050 max=0.002459 Jy/beam ! Clean residual mean=-0.000011 rms=0.000730 Jy/beam ! Combined flux in latest and established models = 0.465068 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 215 components and 0.465068 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077401Jy sigma=0.000641 ! Fit after self-cal, rms=0.077396Jy sigma=0.000640 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.519 mas, bmaj=10.37 mas, bpa=-20.76 degrees ! Estimated noise=2148.4 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.519 x 10.37 at -20.76 degrees (North through East) ! Clean map min=-0.003556 max=0.42032 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.927 mas, bmaj=10.27 mas, bpa=-20.52 degrees ! Estimated noise=2465.76 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.326893 Jy ! Component: 100 - total flux cleaned = 0.398922 Jy ! Component: 150 - total flux cleaned = 0.422187 Jy ! Component: 200 - total flux cleaned = 0.433293 Jy ! Total flux subtracted in 200 components = 0.433293 Jy ! Clean residual min=-0.006090 max=0.005892 Jy/beam ! Clean residual mean=-0.000024 rms=0.001560 Jy/beam ! Combined flux in latest and established models = 0.433293 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 30 model components to the UV plane model. ! The established model now contains 30 components and 0.433293 Jy ! Inverting map and beam ! Estimated beam: bmin=3.519 mas, bmaj=10.37 mas, bpa=-20.76 degrees ! Estimated noise=2148.4 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2, 9). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00644266 Jy ! Component: 100 - total flux cleaned = 0.0113836 Jy ! Component: 150 - total flux cleaned = 0.0154405 Jy ! Component: 200 - total flux cleaned = 0.0187523 Jy ! Total flux subtracted in 200 components = 0.0187523 Jy ! Clean residual min=-0.004535 max=0.003762 Jy/beam ! Clean residual mean=-0.000017 rms=0.001019 Jy/beam ! Combined flux in latest and established models = 0.452045 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 70 components and 0.452045 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.846 mas, bmaj=11.17 mas, bpa=-18.97 degrees ! Estimated noise=2649.66 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00444432 Jy ! Component: 100 - total flux cleaned = 0.00735592 Jy ! Component: 150 - total flux cleaned = 0.00938219 Jy ! Component: 200 - total flux cleaned = 0.0106675 Jy ! Total flux subtracted in 200 components = 0.0106675 Jy ! Clean residual min=-0.004081 max=0.002749 Jy/beam ! Clean residual mean=-0.000019 rms=0.000932 Jy/beam ! Combined flux in latest and established models = 0.462712 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000975538 Jy ! Component: 100 - total flux cleaned = 0.00178028 Jy ! Component: 150 - total flux cleaned = 0.0020746 Jy ! Component: 200 - total flux cleaned = 0.00241679 Jy ! Total flux subtracted in 200 components = 0.00241679 Jy ! Clean residual min=-0.003401 max=0.002600 Jy/beam ! Clean residual mean=-0.000017 rms=0.000836 Jy/beam ! Combined flux in latest and established models = 0.465129 Jy ! Adding 66 model components to the UV plane model. ! The established model now contains 130 components and 0.465129 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.519 mas, bmaj=10.37 mas, bpa=-20.76 degrees ! Estimated noise=2148.4 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.12505e-06 Jy ! Component: 100 - total flux cleaned = 0.000164855 Jy ! Component: 150 - total flux cleaned = 0.000467393 Jy ! Component: 200 - total flux cleaned = 0.000745211 Jy ! Total flux subtracted in 200 components = 0.000745211 Jy ! Clean residual min=-0.003062 max=0.003133 Jy/beam ! Clean residual mean=-0.000007 rms=0.000746 Jy/beam ! Combined flux in latest and established models = 0.465874 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 159 components and 0.465874 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077525Jy sigma=0.000641 ! Fit after self-cal, rms=0.077511Jy sigma=0.000641 wmodel J1113+1442_S_2017_10_09_pus_map.mod ! Writing 159 model components to file: J1113+1442_S_2017_10_09_pus_map.mod wobs J1113+1442_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J1113+1442_S_2017_10_09_pus_uvs.fits wwins J1113+1442_S_2017_10_09_pus_map.win ! wwins: Wrote 5 windows to J1113+1442_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000560978 Jy ! Component: 100 - total flux cleaned = -0.00129475 Jy ! Component: 150 - total flux cleaned = -0.00188695 Jy ! Component: 200 - total flux cleaned = -0.00216702 Jy ! Component: 250 - total flux cleaned = -0.00243427 Jy ! Component: 300 - total flux cleaned = -0.0027343 Jy ! Component: 350 - total flux cleaned = -0.00286 Jy ! Component: 400 - total flux cleaned = -0.00314323 Jy ! Component: 450 - total flux cleaned = -0.00326054 Jy ! Component: 500 - total flux cleaned = -0.00345183 Jy ! Component: 550 - total flux cleaned = -0.00363887 Jy ! Component: 600 - total flux cleaned = -0.00385799 Jy ! Component: 650 - total flux cleaned = -0.00410673 Jy ! Component: 700 - total flux cleaned = -0.00435041 Jy ! Component: 750 - total flux cleaned = -0.00458832 Jy ! Component: 800 - total flux cleaned = -0.00482135 Jy ! Component: 850 - total flux cleaned = -0.00501785 Jy ! Component: 900 - total flux cleaned = -0.00514674 Jy ! Component: 950 - total flux cleaned = -0.00530583 Jy ! Component: 1000 - total flux cleaned = -0.00555527 Jy ! Component: 1050 - total flux cleaned = -0.0056781 Jy ! Component: 1100 - total flux cleaned = -0.00576882 Jy ! Component: 1150 - total flux cleaned = -0.00585847 Jy ! Component: 1200 - total flux cleaned = -0.00594717 Jy ! Component: 1250 - total flux cleaned = -0.00612148 Jy ! Component: 1300 - total flux cleaned = -0.0061781 Jy ! Component: 1350 - total flux cleaned = -0.00629121 Jy ! Component: 1400 - total flux cleaned = -0.0062912 Jy ! Component: 1450 - total flux cleaned = -0.00637374 Jy ! Component: 1500 - total flux cleaned = -0.00634679 Jy ! Component: 1550 - total flux cleaned = -0.00634689 Jy ! Component: 1600 - total flux cleaned = -0.00645341 Jy ! Component: 1650 - total flux cleaned = -0.00640103 Jy ! Component: 1700 - total flux cleaned = -0.00640106 Jy ! Component: 1750 - total flux cleaned = -0.00642662 Jy ! Component: 1800 - total flux cleaned = -0.00642653 Jy ! Component: 1850 - total flux cleaned = -0.00647641 Jy ! Component: 1900 - total flux cleaned = -0.00650096 Jy ! Component: 1950 - total flux cleaned = -0.00654981 Jy ! Component: 2000 - total flux cleaned = -0.00652522 Jy ! Component: 2050 - total flux cleaned = -0.00657293 Jy ! Component: 2100 - total flux cleaned = -0.00666812 Jy ! Component: 2150 - total flux cleaned = -0.00673852 Jy ! Component: 2200 - total flux cleaned = -0.00676154 Jy ! Component: 2250 - total flux cleaned = -0.00676173 Jy ! Component: 2300 - total flux cleaned = -0.00682997 Jy ! Component: 2350 - total flux cleaned = -0.00689803 Jy ! Component: 2400 - total flux cleaned = -0.00689816 Jy ! Component: 2450 - total flux cleaned = -0.00700982 Jy ! Component: 2500 - total flux cleaned = -0.00707622 Jy ! Component: 2550 - total flux cleaned = -0.00714181 Jy ! Component: 2600 - total flux cleaned = -0.00712019 Jy ! Component: 2650 - total flux cleaned = -0.00722799 Jy ! Component: 2700 - total flux cleaned = -0.00731367 Jy ! Component: 2750 - total flux cleaned = -0.00741961 Jy ! Component: 2800 - total flux cleaned = -0.00739829 Jy ! Component: 2850 - total flux cleaned = -0.00737729 Jy ! Component: 2900 - total flux cleaned = -0.0074397 Jy ! Component: 2950 - total flux cleaned = -0.00750145 Jy ! Component: 3000 - total flux cleaned = -0.00739925 Jy ! Component: 3050 - total flux cleaned = -0.00744012 Jy ! Component: 3100 - total flux cleaned = -0.00744016 Jy ! Component: 3150 - total flux cleaned = -0.00742026 Jy ! Component: 3200 - total flux cleaned = -0.00749981 Jy ! Component: 3250 - total flux cleaned = -0.0074404 Jy ! Component: 3300 - total flux cleaned = -0.00747968 Jy ! Component: 3350 - total flux cleaned = -0.00746026 Jy ! Component: 3400 - total flux cleaned = -0.0074021 Jy ! Component: 3450 - total flux cleaned = -0.00749849 Jy ! Component: 3500 - total flux cleaned = -0.00749846 Jy ! Component: 3550 - total flux cleaned = -0.00747942 Jy ! Component: 3600 - total flux cleaned = -0.00755536 Jy ! Component: 3650 - total flux cleaned = -0.00749875 Jy ! Component: 3700 - total flux cleaned = -0.00755511 Jy ! Component: 3750 - total flux cleaned = -0.00757393 Jy ! Component: 3800 - total flux cleaned = -0.0076295 Jy ! Component: 3850 - total flux cleaned = -0.00770327 Jy ! Component: 3900 - total flux cleaned = -0.00768491 Jy ! Component: 3950 - total flux cleaned = -0.00766653 Jy ! Component: 4000 - total flux cleaned = -0.00773913 Jy ! Component: 4050 - total flux cleaned = -0.00768495 Jy ! Total flux subtracted in 4096 components = -0.00773896 Jy ! Clean residual min=-0.001091 max=0.000996 Jy/beam ! Clean residual mean=-0.000002 rms=0.000326 Jy/beam ! Combined flux in latest and established models = 0.458135 Jy keep ! Adding 252 model components to the UV plane model. ! The established model now contains 411 components and 0.458135 Jy ![Exited script file: muppet] wmap "J1113+1442_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.519 x 10.37 at -20.76 degrees (North through East) ! Clean map min=-0.003058 max=0.41915 Jy/beam ! Writing clean map to FITS file: J1113+1442_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.419154 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000323515 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.231548 0.231548 0.463097 0.926194 1.85239 3.70477 7.40955 14.8191 29.6382 59.2764 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.419 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.519 x 10.37 at -20.76 degrees (North through East) ! Clean map min=-0.003058 max=0.41915 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1113+1442_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:10:46 2019