! Started logfile: J1113+1442_S_2017_02_19_pus_uvs.log on Sat May 4 18:49:43 2019 obs J1113+1442_S_2017_02_19_pus_uva.fits ! Reading UV FITS file: J1113+1442_S_2017_02_19_pus_uva.fits ! AN table 1: 16 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.523611 visibilities/baseline/integration-bin. ! Found source: J1113+1442 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 482 lines of history. ! ! Reading 1508 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1113+1442_S_2017_02_19_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 44 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 44 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 44 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 87 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.638706Jy sigma=0.005710 ! Fit after self-cal, rms=0.635553Jy sigma=0.005689 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.657 mas, bmaj=5.617 mas, bpa=-7.408 degrees ! Estimated noise=2704.9 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.279369 Jy ! Component: 100 - total flux cleaned = 0.347919 Jy ! Total flux subtracted in 100 components = 0.347919 Jy ! Clean residual min=-0.024772 max=0.028213 Jy/beam ! Clean residual mean=0.000024 rms=0.006987 Jy/beam ! Combined flux in latest and established models = 0.347919 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.347919 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131163Jy sigma=0.001017 ! Fit after self-cal, rms=0.131133Jy sigma=0.001017 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.187 mas, bmaj=6.167 mas, bpa=-3.637 degrees ! Estimated noise=2304.17 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0337222 Jy ! Component: 100 - total flux cleaned = 0.0487741 Jy ! Component: 150 - total flux cleaned = 0.0559574 Jy ! Component: 200 - total flux cleaned = 0.0561542 Jy ! Total flux subtracted in 200 components = 0.0561542 Jy ! Clean residual min=-0.016938 max=0.021252 Jy/beam ! Clean residual mean=0.000053 rms=0.005096 Jy/beam ! Combined flux in latest and established models = 0.404073 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 23 components and 0.404073 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120772Jy sigma=0.000959 ! Fit after self-cal, rms=0.120706Jy sigma=0.000958 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.93 HN 0.99 KP 1.01 ! LA 1.00 MK 0.91 NL 0.85 OV 1.02 ! PT 1.00* SC 0.99 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.01 HN 0.97 KP 0.95 ! LA 0.96 MK 0.95 NL 1.15 OV 1.06 ! PT 1.00* SC 1.04 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 0.99 HN 0.99 KP 0.85 ! LA 0.77 MK 0.95 NL 1.48 OV 0.96 ! PT 1.00* SC 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.17 FD 0.93 HN 0.96 KP 1.00* ! LA 0.84 MK 1.53 NL 1.00* OV 1.57 ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.120706Jy sigma=0.000958 ! Fit after self-cal, rms=0.106590Jy sigma=0.000768 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.172 mas, bmaj=6.182 mas, bpa=-3.185 degrees ! Estimated noise=2299.07 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00235855 Jy ! Component: 100 - total flux cleaned = -0.00235992 Jy ! Component: 150 - total flux cleaned = -0.0023648 Jy ! Component: 200 - total flux cleaned = -0.00246555 Jy ! Total flux subtracted in 200 components = -0.00246555 Jy ! Clean residual min=-0.014908 max=0.012216 Jy/beam ! Clean residual mean=0.000086 rms=0.003521 Jy/beam ! Combined flux in latest and established models = 0.401607 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 30 components and 0.401607 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106176Jy sigma=0.000766 ! Fit after self-cal, rms=0.106258Jy sigma=0.000765 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106258Jy sigma=0.000765 ! Fit after self-cal, rms=0.112932Jy sigma=0.000651 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.163 mas, bmaj=6.207 mas, bpa=-2.679 degrees ! Estimated noise=2294.03 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000844055 Jy ! Component: 100 - total flux cleaned = 0.000652886 Jy ! Component: 150 - total flux cleaned = 0.000493391 Jy ! Component: 200 - total flux cleaned = 0.000489064 Jy ! Total flux subtracted in 200 components = 0.000489064 Jy ! Clean residual min=-0.006307 max=0.005607 Jy/beam ! Clean residual mean=0.000032 rms=0.001510 Jy/beam ! Combined flux in latest and established models = 0.402096 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 43 components and 0.402096 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112883Jy sigma=0.000649 ! Fit after self-cal, rms=0.113471Jy sigma=0.000648 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000296307 Jy ! Component: 100 - total flux cleaned = 0.00023966 Jy ! Component: 150 - total flux cleaned = 0.000289665 Jy ! Component: 200 - total flux cleaned = 0.00033379 Jy ! Total flux subtracted in 200 components = 0.00033379 Jy ! Clean residual min=-0.006272 max=0.005572 Jy/beam ! Clean residual mean=0.000033 rms=0.001487 Jy/beam ! Combined flux in latest and established models = 0.40243 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 47 components and 0.40243 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113452Jy sigma=0.000648 ! Fit after self-cal, rms=0.113440Jy sigma=0.000647 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113440Jy sigma=0.000647 ! Fit after self-cal, rms=0.114986Jy sigma=0.000647 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.157 mas, bmaj=6.209 mas, bpa=-2.38 degrees ! Estimated noise=2292.7 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000574358 Jy ! Component: 100 - total flux cleaned = 0.000629732 Jy ! Component: 150 - total flux cleaned = 0.000678471 Jy ! Component: 200 - total flux cleaned = 0.000726121 Jy ! Total flux subtracted in 200 components = 0.000726121 Jy ! Clean residual min=-0.006097 max=0.005416 Jy/beam ! Clean residual mean=0.000030 rms=0.001445 Jy/beam ! Combined flux in latest and established models = 0.403156 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 54 components and 0.403156 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114970Jy sigma=0.000646 ! Fit after self-cal, rms=0.114976Jy sigma=0.000646 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000193466 Jy ! Component: 100 - total flux cleaned = 0.000232221 Jy ! Component: 150 - total flux cleaned = 0.000301955 Jy ! Component: 200 - total flux cleaned = 0.000334438 Jy ! Total flux subtracted in 200 components = 0.000334438 Jy ! Clean residual min=-0.006067 max=0.005359 Jy/beam ! Clean residual mean=0.000030 rms=0.001433 Jy/beam ! Combined flux in latest and established models = 0.403491 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 56 components and 0.403491 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114955Jy sigma=0.000646 ! Fit after self-cal, rms=0.114953Jy sigma=0.000646 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114953Jy sigma=0.000646 ! Fit after self-cal, rms=0.115195Jy sigma=0.000646 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.194 mas, bmaj=9.666 mas, bpa=3.146 degrees ! Estimated noise=2867.03 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00146603 Jy ! Component: 100 - total flux cleaned = 0.0017069 Jy ! Component: 150 - total flux cleaned = 0.00178917 Jy ! Component: 200 - total flux cleaned = 0.00188368 Jy ! Total flux subtracted in 200 components = 0.00188368 Jy ! Clean residual min=-0.007338 max=0.006136 Jy/beam ! Clean residual mean=0.000055 rms=0.001761 Jy/beam ! Combined flux in latest and established models = 0.405374 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 59 components and 0.405374 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115181Jy sigma=0.000646 ! Fit after self-cal, rms=0.115174Jy sigma=0.000646 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.66313e-05 Jy ! Component: 100 - total flux cleaned = 6.35582e-05 Jy ! Component: 150 - total flux cleaned = 9.80479e-05 Jy ! Component: 200 - total flux cleaned = 0.000130906 Jy ! Total flux subtracted in 200 components = 0.000130906 Jy ! Clean residual min=-0.007317 max=0.006055 Jy/beam ! Clean residual mean=0.000055 rms=0.001758 Jy/beam ! Combined flux in latest and established models = 0.405505 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 62 components and 0.405505 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115159Jy sigma=0.000645 ! Fit after self-cal, rms=0.115156Jy sigma=0.000645 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.154 mas, bmaj=6.209 mas, bpa=-2.202 degrees ! Estimated noise=2291.4 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.154 x 6.209 at -2.202 degrees (North through East) ! Clean map min=-0.0058177 max=0.36279 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.628 mas, bmaj=5.666 mas, bpa=-5.03 degrees ! Estimated noise=2722.93 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.280613 Jy ! Component: 100 - total flux cleaned = 0.348164 Jy ! Component: 150 - total flux cleaned = 0.376799 Jy ! Component: 200 - total flux cleaned = 0.390889 Jy ! Total flux subtracted in 200 components = 0.390889 Jy ! Clean residual min=-0.007857 max=0.007275 Jy/beam ! Clean residual mean=0.000008 rms=0.001975 Jy/beam ! Combined flux in latest and established models = 0.390888 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.390888 Jy ! Inverting map and beam ! Estimated beam: bmin=4.154 mas, bmaj=6.209 mas, bpa=-2.202 degrees ! Estimated noise=2291.4 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00813388 Jy ! Component: 100 - total flux cleaned = 0.0102231 Jy ! Component: 150 - total flux cleaned = 0.0111063 Jy ! Component: 200 - total flux cleaned = 0.0118242 Jy ! Total flux subtracted in 200 components = 0.0118242 Jy ! Clean residual min=-0.006002 max=0.005339 Jy/beam ! Clean residual mean=0.000028 rms=0.001439 Jy/beam ! Combined flux in latest and established models = 0.402713 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 33 components and 0.402713 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.194 mas, bmaj=9.666 mas, bpa=3.146 degrees ! Estimated noise=2867.03 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00183626 Jy ! Component: 100 - total flux cleaned = 0.00239887 Jy ! Component: 150 - total flux cleaned = 0.00246146 Jy ! Component: 200 - total flux cleaned = 0.0024996 Jy ! Total flux subtracted in 200 components = 0.0024996 Jy ! Clean residual min=-0.007280 max=0.006051 Jy/beam ! Clean residual mean=0.000056 rms=0.001769 Jy/beam ! Combined flux in latest and established models = 0.405212 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.87131e-05 Jy ! Component: 100 - total flux cleaned = 5.36946e-05 Jy ! Component: 150 - total flux cleaned = 8.74149e-05 Jy ! Component: 200 - total flux cleaned = 0.000104379 Jy ! Total flux subtracted in 200 components = 0.000104379 Jy ! Clean residual min=-0.007276 max=0.006018 Jy/beam ! Clean residual mean=0.000056 rms=0.001767 Jy/beam ! Combined flux in latest and established models = 0.405317 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 44 components and 0.405317 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.154 mas, bmaj=6.209 mas, bpa=-2.202 degrees ! Estimated noise=2291.4 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000304879 Jy ! Component: 100 - total flux cleaned = -0.000641045 Jy ! Component: 150 - total flux cleaned = -0.000785087 Jy ! Component: 200 - total flux cleaned = -0.000880812 Jy ! Total flux subtracted in 200 components = -0.000880812 Jy ! Clean residual min=-0.005996 max=0.005082 Jy/beam ! Clean residual mean=0.000029 rms=0.001420 Jy/beam ! Combined flux in latest and established models = 0.404436 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 49 components and 0.404436 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115154Jy sigma=0.000646 ! Fit after self-cal, rms=0.115156Jy sigma=0.000645 wmodel J1113+1442_S_2017_02_19_pus_map.mod ! Writing 49 model components to file: J1113+1442_S_2017_02_19_pus_map.mod wobs J1113+1442_S_2017_02_19_pus_uvs.fits ! Writing UV FITS file: J1113+1442_S_2017_02_19_pus_uvs.fits wwins J1113+1442_S_2017_02_19_pus_map.win ! wwins: Wrote 1 windows to J1113+1442_S_2017_02_19_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00192285 Jy ! Component: 100 - total flux cleaned = -0.00267426 Jy ! Component: 150 - total flux cleaned = -0.00258925 Jy ! Component: 200 - total flux cleaned = -0.00275854 Jy ! Component: 250 - total flux cleaned = -0.00267354 Jy ! Component: 300 - total flux cleaned = -0.00274886 Jy ! Component: 350 - total flux cleaned = -0.00259491 Jy ! Component: 400 - total flux cleaned = -0.00237344 Jy ! Component: 450 - total flux cleaned = -0.00201797 Jy ! Component: 500 - total flux cleaned = -0.00188066 Jy ! Component: 550 - total flux cleaned = -0.00174575 Jy ! Component: 600 - total flux cleaned = -0.00154755 Jy ! Component: 650 - total flux cleaned = -0.00148388 Jy ! Component: 700 - total flux cleaned = -0.00166987 Jy ! Component: 750 - total flux cleaned = -0.00160713 Jy ! Component: 800 - total flux cleaned = -0.00166629 Jy ! Component: 850 - total flux cleaned = -0.00160846 Jy ! Component: 900 - total flux cleaned = -0.00178008 Jy ! Component: 950 - total flux cleaned = -0.0016682 Jy ! Component: 1000 - total flux cleaned = -0.00172351 Jy ! Component: 1050 - total flux cleaned = -0.00183124 Jy ! Component: 1100 - total flux cleaned = -0.00177819 Jy ! Component: 1150 - total flux cleaned = -0.00183046 Jy ! Component: 1200 - total flux cleaned = -0.00172771 Jy ! Component: 1250 - total flux cleaned = -0.00172782 Jy ! Component: 1300 - total flux cleaned = -0.00167995 Jy ! Component: 1350 - total flux cleaned = -0.00187344 Jy ! Component: 1400 - total flux cleaned = -0.00187364 Jy ! Component: 1450 - total flux cleaned = -0.00201326 Jy ! Component: 1500 - total flux cleaned = -0.00201247 Jy ! Component: 1550 - total flux cleaned = -0.00210298 Jy ! Component: 1600 - total flux cleaned = -0.00223737 Jy ! Component: 1650 - total flux cleaned = -0.00236932 Jy ! Component: 1700 - total flux cleaned = -0.00236801 Jy ! Component: 1750 - total flux cleaned = -0.00223953 Jy ! Component: 1800 - total flux cleaned = -0.00228182 Jy ! Component: 1850 - total flux cleaned = -0.00224015 Jy ! Component: 1900 - total flux cleaned = -0.00219961 Jy ! Component: 1950 - total flux cleaned = -0.00215899 Jy ! Component: 2000 - total flux cleaned = -0.00207943 Jy ! Component: 2050 - total flux cleaned = -0.00211943 Jy ! Component: 2100 - total flux cleaned = -0.0020023 Jy ! Component: 2150 - total flux cleaned = -0.00192519 Jy ! Component: 2200 - total flux cleaned = -0.00188736 Jy ! Component: 2250 - total flux cleaned = -0.00177432 Jy ! Component: 2300 - total flux cleaned = -0.0017742 Jy ! Component: 2350 - total flux cleaned = -0.00170051 Jy ! Component: 2400 - total flux cleaned = -0.00144552 Jy ! Component: 2450 - total flux cleaned = -0.00133753 Jy ! Component: 2500 - total flux cleaned = -0.00119414 Jy ! Component: 2550 - total flux cleaned = -0.000982115 Jy ! Component: 2600 - total flux cleaned = -0.000876788 Jy ! Component: 2650 - total flux cleaned = -0.000738033 Jy ! Component: 2700 - total flux cleaned = -0.000600754 Jy ! Component: 2750 - total flux cleaned = -0.00056683 Jy ! Component: 2800 - total flux cleaned = -0.000364567 Jy ! Component: 2850 - total flux cleaned = -0.00033125 Jy ! Component: 2900 - total flux cleaned = -0.000264458 Jy ! Component: 2950 - total flux cleaned = 3.08301e-05 Jy ! Component: 3000 - total flux cleaned = 9.57561e-05 Jy ! Component: 3050 - total flux cleaned = 0.00032197 Jy ! Component: 3100 - total flux cleaned = 0.000385598 Jy ! Component: 3150 - total flux cleaned = 0.000544349 Jy ! Component: 3200 - total flux cleaned = 0.000670082 Jy ! Component: 3250 - total flux cleaned = 0.000826312 Jy ! Component: 3300 - total flux cleaned = 0.00095039 Jy ! Component: 3350 - total flux cleaned = 0.00110454 Jy ! Component: 3400 - total flux cleaned = 0.00128767 Jy ! Component: 3450 - total flux cleaned = 0.00134831 Jy ! Component: 3500 - total flux cleaned = 0.00158902 Jy ! Component: 3550 - total flux cleaned = 0.00170861 Jy ! Component: 3600 - total flux cleaned = 0.00185709 Jy ! Component: 3650 - total flux cleaned = 0.00200455 Jy ! Component: 3700 - total flux cleaned = 0.00209223 Jy ! Component: 3750 - total flux cleaned = 0.00223798 Jy ! Component: 3800 - total flux cleaned = 0.00238291 Jy ! Component: 3850 - total flux cleaned = 0.00261257 Jy ! Component: 3900 - total flux cleaned = 0.00269822 Jy ! Component: 3950 - total flux cleaned = 0.00284012 Jy ! Component: 4000 - total flux cleaned = 0.00298109 Jy ! Component: 4050 - total flux cleaned = 0.0031212 Jy ! Total flux subtracted in 4096 components = 0.00317693 Jy ! Clean residual min=-0.001640 max=0.001414 Jy/beam ! Clean residual mean=0.000008 rms=0.000483 Jy/beam ! Combined flux in latest and established models = 0.407613 Jy keep ! Adding 271 model components to the UV plane model. ! The established model now contains 320 components and 0.407613 Jy ![Exited script file: muppet] wmap "J1113+1442_S_2017_02_19_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.154 x 6.209 at -2.202 degrees (North through East) ! Clean map min=-0.0036332 max=0.36223 Jy/beam ! Writing clean map to FITS file: J1113+1442_S_2017_02_19_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.362232 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000470713 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.389844 0.389844 0.779688 1.55938 3.11875 6.2375 12.475 24.95 49.9 99.8 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.362 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.154 x 6.209 at -2.202 degrees (North through East) ! Clean map min=-0.0036332 max=0.36223 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1113+1442_S_2017_02_19_pus_uvs.log closed on Sat May 4 18:49:48 2019