! Started logfile: J1113+1442_S_2017_01_21_pus_uvs.log on Sun May 5 15:53:20 2019 obs J1113+1442_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J1113+1442_S_2017_01_21_pus_uva.fits ! AN table 1: 8 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.652778 visibilities/baseline/integration-bin. ! Found source: J1113+1442 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 752 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1113+1442_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.655866Jy sigma=0.005471 ! Fit after self-cal, rms=0.651505Jy sigma=0.005435 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.32 mas, bmaj=6.543 mas, bpa=-3.503 degrees ! Estimated noise=3817.28 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.278671 Jy ! Component: 100 - total flux cleaned = 0.34587 Jy ! Total flux subtracted in 100 components = 0.34587 Jy ! Clean residual min=-0.017007 max=0.025729 Jy/beam ! Clean residual mean=0.000167 rms=0.005456 Jy/beam ! Combined flux in latest and established models = 0.34587 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.34587 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108763Jy sigma=0.000762 ! Fit after self-cal, rms=0.108748Jy sigma=0.000761 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.655 mas, bmaj=7.149 mas, bpa=-2.505 degrees ! Estimated noise=3368.47 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0227072 Jy ! Component: 100 - total flux cleaned = 0.0321432 Jy ! Component: 150 - total flux cleaned = 0.0370053 Jy ! Component: 200 - total flux cleaned = 0.0381887 Jy ! Total flux subtracted in 200 components = 0.0381887 Jy ! Clean residual min=-0.013486 max=0.014403 Jy/beam ! Clean residual mean=0.000127 rms=0.003915 Jy/beam ! Combined flux in latest and established models = 0.384059 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 29 components and 0.384059 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103809Jy sigma=0.000720 ! Fit after self-cal, rms=0.103791Jy sigma=0.000720 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.00* HN 0.93 LA 1.01 ! MK 0.97 NL 0.98 OV 1.02 PT 0.99 ! SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.00* HN 1.00 LA 0.98 ! MK 0.98 NL 1.04 OV 1.17 PT 0.95 ! SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.00* HN 1.01 LA 0.97 ! MK 1.03 NL 1.10 OV 1.01 PT 0.94 ! SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.00* HN 0.95 LA 0.64 ! MK 1.03 NL 1.00* OV 1.05 PT 1.02 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.103791Jy sigma=0.000720 ! Fit after self-cal, rms=0.088146Jy sigma=0.000662 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.645 mas, bmaj=7.185 mas, bpa=-2.466 degrees ! Estimated noise=3357.46 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000773353 Jy ! Component: 100 - total flux cleaned = -0.000774919 Jy ! Component: 150 - total flux cleaned = -0.000666277 Jy ! Component: 200 - total flux cleaned = -0.000664484 Jy ! Total flux subtracted in 200 components = -0.000664484 Jy ! Clean residual min=-0.010911 max=0.008800 Jy/beam ! Clean residual mean=0.000036 rms=0.002141 Jy/beam ! Combined flux in latest and established models = 0.383394 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 41 components and 0.383394 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088066Jy sigma=0.000661 ! Fit after self-cal, rms=0.088096Jy sigma=0.000661 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088096Jy sigma=0.000661 ! Fit after self-cal, rms=0.088082Jy sigma=0.000661 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.644 mas, bmaj=7.186 mas, bpa=-2.455 degrees ! Estimated noise=3354.56 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000507265 Jy ! Component: 100 - total flux cleaned = -0.000414239 Jy ! Component: 150 - total flux cleaned = -0.000368433 Jy ! Component: 200 - total flux cleaned = -0.000325174 Jy ! Total flux subtracted in 200 components = -0.000325174 Jy ! Clean residual min=-0.010875 max=0.008537 Jy/beam ! Clean residual mean=0.000035 rms=0.002121 Jy/beam ! Combined flux in latest and established models = 0.383069 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 42 components and 0.383069 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088032Jy sigma=0.000661 ! Fit after self-cal, rms=0.088028Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000195006 Jy ! Component: 100 - total flux cleaned = -0.000111815 Jy ! Component: 150 - total flux cleaned = -3.58551e-05 Jy ! Component: 200 - total flux cleaned = 1.95442e-06 Jy ! Total flux subtracted in 200 components = 1.95442e-06 Jy ! Clean residual min=-0.010802 max=0.008454 Jy/beam ! Clean residual mean=0.000035 rms=0.002110 Jy/beam ! Combined flux in latest and established models = 0.383071 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 45 components and 0.383071 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087994Jy sigma=0.000660 ! Fit after self-cal, rms=0.087991Jy sigma=0.000660 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087991Jy sigma=0.000660 ! Fit after self-cal, rms=0.088042Jy sigma=0.000660 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.644 mas, bmaj=7.188 mas, bpa=-2.463 degrees ! Estimated noise=3353.71 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000248343 Jy ! Component: 100 - total flux cleaned = -0.000248288 Jy ! Component: 150 - total flux cleaned = -0.000214454 Jy ! Component: 200 - total flux cleaned = -0.000146507 Jy ! Total flux subtracted in 200 components = -0.000146507 Jy ! Clean residual min=-0.010728 max=0.008376 Jy/beam ! Clean residual mean=0.000034 rms=0.002099 Jy/beam ! Combined flux in latest and established models = 0.382924 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 45 components and 0.382924 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088014Jy sigma=0.000660 ! Fit after self-cal, rms=0.088014Jy sigma=0.000660 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.52505e-06 Jy ! Component: 100 - total flux cleaned = 3.68341e-05 Jy ! Component: 150 - total flux cleaned = 9.9516e-05 Jy ! Component: 200 - total flux cleaned = 0.000130009 Jy ! Total flux subtracted in 200 components = 0.000130009 Jy ! Clean residual min=-0.010675 max=0.008337 Jy/beam ! Clean residual mean=0.000034 rms=0.002091 Jy/beam ! Combined flux in latest and established models = 0.383054 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 45 components and 0.383054 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087992Jy sigma=0.000660 ! Fit after self-cal, rms=0.087991Jy sigma=0.000660 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087991Jy sigma=0.000660 ! Fit after self-cal, rms=0.087992Jy sigma=0.000660 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.454 mas, bmaj=10.98 mas, bpa=-0.9137 degrees ! Estimated noise=4711.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00110882 Jy ! Component: 100 - total flux cleaned = 0.00139096 Jy ! Component: 150 - total flux cleaned = 0.00163094 Jy ! Component: 200 - total flux cleaned = 0.00183854 Jy ! Total flux subtracted in 200 components = 0.00183854 Jy ! Clean residual min=-0.011700 max=0.009625 Jy/beam ! Clean residual mean=0.000077 rms=0.002884 Jy/beam ! Combined flux in latest and established models = 0.384893 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 48 components and 0.384893 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088031Jy sigma=0.000660 ! Fit after self-cal, rms=0.088009Jy sigma=0.000660 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.70882e-05 Jy ! Component: 100 - total flux cleaned = 0.000245484 Jy ! Component: 150 - total flux cleaned = 0.000371426 Jy ! Component: 200 - total flux cleaned = 0.000510673 Jy ! Total flux subtracted in 200 components = 0.000510673 Jy ! Clean residual min=-0.011613 max=0.009429 Jy/beam ! Clean residual mean=0.000074 rms=0.002855 Jy/beam ! Combined flux in latest and established models = 0.385404 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 51 components and 0.385404 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088058Jy sigma=0.000661 ! Fit after self-cal, rms=0.088046Jy sigma=0.000661 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.644 mas, bmaj=7.189 mas, bpa=-2.472 degrees ! Estimated noise=3352.51 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.644 x 7.189 at -2.472 degrees (North through East) ! Clean map min=-0.0097312 max=0.35027 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.319 mas, bmaj=6.599 mas, bpa=-3.509 degrees ! Estimated noise=3751.24 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.273783 Jy ! Component: 100 - total flux cleaned = 0.339419 Jy ! Component: 150 - total flux cleaned = 0.363379 Jy ! Component: 200 - total flux cleaned = 0.373032 Jy ! Total flux subtracted in 200 components = 0.373032 Jy ! Clean residual min=-0.010925 max=0.009019 Jy/beam ! Clean residual mean=0.000030 rms=0.002267 Jy/beam ! Combined flux in latest and established models = 0.373032 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.373032 Jy ! Inverting map and beam ! Estimated beam: bmin=2.644 mas, bmaj=7.189 mas, bpa=-2.472 degrees ! Estimated noise=3352.51 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00543978 Jy ! Component: 100 - total flux cleaned = 0.00703807 Jy ! Component: 150 - total flux cleaned = 0.00775207 Jy ! Component: 200 - total flux cleaned = 0.00819783 Jy ! Total flux subtracted in 200 components = 0.00819783 Jy ! Clean residual min=-0.011061 max=0.008601 Jy/beam ! Clean residual mean=0.000039 rms=0.002129 Jy/beam ! Combined flux in latest and established models = 0.38123 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 27 components and 0.38123 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.454 mas, bmaj=10.98 mas, bpa=-0.9137 degrees ! Estimated noise=4711.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00256881 Jy ! Component: 100 - total flux cleaned = 0.00286125 Jy ! Component: 150 - total flux cleaned = 0.00311171 Jy ! Component: 200 - total flux cleaned = 0.00332515 Jy ! Total flux subtracted in 200 components = 0.00332515 Jy ! Clean residual min=-0.011788 max=0.009743 Jy/beam ! Clean residual mean=0.000080 rms=0.002909 Jy/beam ! Combined flux in latest and established models = 0.384555 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000185249 Jy ! Component: 100 - total flux cleaned = 0.000347773 Jy ! Component: 150 - total flux cleaned = 0.00046214 Jy ! Component: 200 - total flux cleaned = 0.0005666 Jy ! Total flux subtracted in 200 components = 0.0005666 Jy ! Clean residual min=-0.011673 max=0.009559 Jy/beam ! Clean residual mean=0.000076 rms=0.002873 Jy/beam ! Combined flux in latest and established models = 0.385121 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 35 components and 0.385121 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.644 mas, bmaj=7.189 mas, bpa=-2.472 degrees ! Estimated noise=3352.51 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000517403 Jy ! Component: 100 - total flux cleaned = -0.00115394 Jy ! Component: 150 - total flux cleaned = -0.00164143 Jy ! Component: 200 - total flux cleaned = -0.0020937 Jy ! Total flux subtracted in 200 components = -0.0020937 Jy ! Clean residual min=-0.010745 max=0.008439 Jy/beam ! Clean residual mean=0.000034 rms=0.002092 Jy/beam ! Combined flux in latest and established models = 0.383028 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 40 components and 0.383028 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088032Jy sigma=0.000660 ! Fit after self-cal, rms=0.088026Jy sigma=0.000660 wmodel J1113+1442_S_2017_01_21_pus_map.mod ! Writing 40 model components to file: J1113+1442_S_2017_01_21_pus_map.mod wobs J1113+1442_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J1113+1442_S_2017_01_21_pus_uvs.fits wwins J1113+1442_S_2017_01_21_pus_map.win ! wwins: Wrote 1 windows to J1113+1442_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00264711 Jy ! Component: 100 - total flux cleaned = -0.00234586 Jy ! Component: 150 - total flux cleaned = -0.00285734 Jy ! Component: 200 - total flux cleaned = -0.00216748 Jy ! Component: 250 - total flux cleaned = -0.00119852 Jy ! Component: 300 - total flux cleaned = -0.000690674 Jy ! Component: 350 - total flux cleaned = -0.000400471 Jy ! Component: 400 - total flux cleaned = -3.61497e-05 Jy ! Component: 450 - total flux cleaned = 0.000400918 Jy ! Component: 500 - total flux cleaned = 0.000819435 Jy ! Component: 550 - total flux cleaned = 0.00122182 Jy ! Component: 600 - total flux cleaned = 0.00137675 Jy ! Component: 650 - total flux cleaned = 0.00182737 Jy ! Component: 700 - total flux cleaned = 0.00211796 Jy ! Component: 750 - total flux cleaned = 0.00240045 Jy ! Component: 800 - total flux cleaned = 0.00267622 Jy ! Component: 850 - total flux cleaned = 0.00287697 Jy ! Component: 900 - total flux cleaned = 0.0030078 Jy ! Component: 950 - total flux cleaned = 0.00307315 Jy ! Component: 1000 - total flux cleaned = 0.0033244 Jy ! Component: 1050 - total flux cleaned = 0.00350922 Jy ! Component: 1100 - total flux cleaned = 0.0036905 Jy ! Component: 1150 - total flux cleaned = 0.00374999 Jy ! Component: 1200 - total flux cleaned = 0.0039832 Jy ! Component: 1250 - total flux cleaned = 0.00404001 Jy ! Component: 1300 - total flux cleaned = 0.00426555 Jy ! Component: 1350 - total flux cleaned = 0.00420925 Jy ! Component: 1400 - total flux cleaned = 0.00448454 Jy ! Component: 1450 - total flux cleaned = 0.00480743 Jy ! Component: 1500 - total flux cleaned = 0.00496666 Jy ! Component: 1550 - total flux cleaned = 0.00517682 Jy ! Component: 1600 - total flux cleaned = 0.00543672 Jy ! Component: 1650 - total flux cleaned = 0.00574417 Jy ! Component: 1700 - total flux cleaned = 0.00594641 Jy ! Component: 1750 - total flux cleaned = 0.00604631 Jy ! Component: 1800 - total flux cleaned = 0.0062955 Jy ! Component: 1850 - total flux cleaned = 0.00659273 Jy ! Component: 1900 - total flux cleaned = 0.00698661 Jy ! Component: 1950 - total flux cleaned = 0.00737735 Jy ! Component: 2000 - total flux cleaned = 0.00771737 Jy ! Component: 2050 - total flux cleaned = 0.00795866 Jy ! Component: 2100 - total flux cleaned = 0.00829529 Jy ! Component: 2150 - total flux cleaned = 0.00839097 Jy ! Component: 2200 - total flux cleaned = 0.00862999 Jy ! Component: 2250 - total flux cleaned = 0.00886849 Jy ! Component: 2300 - total flux cleaned = 0.00915522 Jy ! Component: 2350 - total flux cleaned = 0.00934667 Jy ! Component: 2400 - total flux cleaned = 0.00968245 Jy ! Component: 2450 - total flux cleaned = 0.00987473 Jy ! Component: 2500 - total flux cleaned = 0.0100675 Jy ! Component: 2550 - total flux cleaned = 0.010213 Jy ! Component: 2600 - total flux cleaned = 0.0104074 Jy ! Component: 2650 - total flux cleaned = 0.0106526 Jy ! Component: 2700 - total flux cleaned = 0.0108998 Jy ! Component: 2750 - total flux cleaned = 0.0111 Jy ! Component: 2800 - total flux cleaned = 0.0112518 Jy ! Component: 2850 - total flux cleaned = 0.0114043 Jy ! Component: 2900 - total flux cleaned = 0.0115587 Jy ! Component: 2950 - total flux cleaned = 0.0117147 Jy ! Component: 3000 - total flux cleaned = 0.0119774 Jy ! Component: 3050 - total flux cleaned = 0.0121903 Jy ! Component: 3100 - total flux cleaned = 0.0122983 Jy ! Component: 3150 - total flux cleaned = 0.0124618 Jy ! Component: 3200 - total flux cleaned = 0.0125727 Jy ! Component: 3250 - total flux cleaned = 0.0127415 Jy ! Component: 3300 - total flux cleaned = 0.0128554 Jy ! Component: 3350 - total flux cleaned = 0.0129708 Jy ! Component: 3400 - total flux cleaned = 0.0131471 Jy ! Component: 3450 - total flux cleaned = 0.013327 Jy ! Component: 3500 - total flux cleaned = 0.0134489 Jy ! Component: 3550 - total flux cleaned = 0.0136339 Jy ! Component: 3600 - total flux cleaned = 0.013822 Jy ! Component: 3650 - total flux cleaned = 0.0140131 Jy ! Component: 3700 - total flux cleaned = 0.0142082 Jy ! Component: 3750 - total flux cleaned = 0.0143404 Jy ! Component: 3800 - total flux cleaned = 0.0145411 Jy ! Component: 3850 - total flux cleaned = 0.0148126 Jy ! Component: 3900 - total flux cleaned = 0.0150902 Jy ! Component: 3950 - total flux cleaned = 0.0153023 Jy ! Component: 4000 - total flux cleaned = 0.0155169 Jy ! Component: 4050 - total flux cleaned = 0.0157356 Jy ! Total flux subtracted in 4096 components = 0.0160333 Jy ! Clean residual min=-0.004580 max=0.004637 Jy/beam ! Clean residual mean=0.000052 rms=0.001076 Jy/beam ! Combined flux in latest and established models = 0.399061 Jy keep ! Adding 219 model components to the UV plane model. ! The established model now contains 259 components and 0.399061 Jy ![Exited script file: muppet] wmap "J1113+1442_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.644 x 7.189 at -2.472 degrees (North through East) ! Clean map min=-0.010529 max=0.35136 Jy/beam ! Writing clean map to FITS file: J1113+1442_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.351361 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000992944 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.847798 0.847798 1.6956 3.39119 6.78238 13.5648 27.1295 54.2591 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0029 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.351 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.644 x 7.189 at -2.472 degrees (North through East) ! Clean map min=-0.010529 max=0.35136 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1113+1442_S_2017_01_21_pus_uvs.log closed on Sun May 5 15:53:24 2019