! Started logfile: J1112-2158_S_2017_01_21_pus_uvs.log on Sun May 5 15:53:15 2019 obs J1112-2158_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J1112-2158_S_2017_01_21_pus_uva.fits ! AN table 1: 114 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.762183 visibilities/baseline/integration-bin. ! Found source: J1112-2158 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 12512 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1112-2158_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 124 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 124 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 124 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 377 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.900284Jy sigma=0.005644 ! Fit after self-cal, rms=0.876923Jy sigma=0.005501 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.249 mas, bmaj=6.165 mas, bpa=-5.702 degrees ! Estimated noise=1807.32 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.103681 Jy ! Component: 100 - total flux cleaned = 0.160199 Jy ! Total flux subtracted in 100 components = 0.160199 Jy ! Clean residual min=-0.028809 max=0.041066 Jy/beam ! Clean residual mean=-0.000554 rms=0.011689 Jy/beam ! Combined flux in latest and established models = 0.160199 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.160199 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.216919Jy sigma=0.001447 ! Fit after self-cal, rms=0.215923Jy sigma=0.001440 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.692 mas, bmaj=7.06 mas, bpa=-4.577 degrees ! Estimated noise=1095.07 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0678913 Jy ! Component: 100 - total flux cleaned = 0.109488 Jy ! Component: 150 - total flux cleaned = 0.135324 Jy ! Component: 200 - total flux cleaned = 0.15167 Jy ! Total flux subtracted in 200 components = 0.15167 Jy ! Clean residual min=-0.043064 max=0.058829 Jy/beam ! Clean residual mean=-0.000640 rms=0.019111 Jy/beam ! Combined flux in latest and established models = 0.311869 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 43 components and 0.311869 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.195514Jy sigma=0.001272 ! Fit after self-cal, rms=0.193804Jy sigma=0.001260 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 1.00* HN 2.58 LA 0.68 ! MK 1.25 NL 1.35 OV 3.74 PT 0.64 ! SC 1.81 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.00* HN 2.30 LA 0.65 ! MK 1.34 NL 1.35 OV 3.75 PT 0.64 ! SC 1.95 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 1.00* HN 2.26 LA 0.65 ! MK 1.35 NL 1.32 OV 3.28 PT 0.63 ! SC 1.58 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.00* HN 1.77 LA 0.65 ! MK 1.66 NL 1.00* OV 2.98 PT 0.62 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.193804Jy sigma=0.001260 ! Fit after self-cal, rms=0.442033Jy sigma=0.000859 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.125 mas, bmaj=7.864 mas, bpa=-6.586 degrees ! Estimated noise=1394.32 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000910651 Jy ! Component: 100 - total flux cleaned = 0.00149806 Jy ! Component: 150 - total flux cleaned = 0.00200552 Jy ! Component: 200 - total flux cleaned = 0.00223402 Jy ! Total flux subtracted in 200 components = 0.00223402 Jy ! Clean residual min=-0.020315 max=0.026999 Jy/beam ! Clean residual mean=-0.000005 rms=0.006655 Jy/beam ! Combined flux in latest and established models = 0.314103 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 47 components and 0.314103 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.440923Jy sigma=0.000858 ! Fit after self-cal, rms=0.454211Jy sigma=0.000834 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.454211Jy sigma=0.000834 ! Fit after self-cal, rms=0.579704Jy sigma=0.000823 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.091 mas, bmaj=7.896 mas, bpa=-7.92 degrees ! Estimated noise=1445.22 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0028572 Jy ! Component: 100 - total flux cleaned = 0.00433768 Jy ! Component: 150 - total flux cleaned = 0.00524563 Jy ! Component: 200 - total flux cleaned = 0.00596543 Jy ! Total flux subtracted in 200 components = 0.00596543 Jy ! Clean residual min=-0.020932 max=0.028221 Jy/beam ! Clean residual mean=-0.000015 rms=0.006675 Jy/beam ! Combined flux in latest and established models = 0.320068 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 56 components and 0.320068 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.578710Jy sigma=0.000823 ! Fit after self-cal, rms=0.579066Jy sigma=0.000821 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000547416 Jy ! Component: 100 - total flux cleaned = 0.000247933 Jy ! Component: 150 - total flux cleaned = 0.000726472 Jy ! Component: 200 - total flux cleaned = 0.00112278 Jy ! Total flux subtracted in 200 components = 0.00112278 Jy ! Clean residual min=-0.020941 max=0.028040 Jy/beam ! Clean residual mean=-0.000005 rms=0.006695 Jy/beam ! Combined flux in latest and established models = 0.321191 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 60 components and 0.321191 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.578314Jy sigma=0.000821 ! Fit after self-cal, rms=0.578530Jy sigma=0.000821 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.578530Jy sigma=0.000821 ! Fit after self-cal, rms=0.563439Jy sigma=0.000812 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.886 mas, bmaj=8.096 mas, bpa=-11.14 degrees ! Estimated noise=1314.99 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00327626 Jy ! Component: 100 - total flux cleaned = -0.00222293 Jy ! Component: 150 - total flux cleaned = -0.00125284 Jy ! Component: 200 - total flux cleaned = -0.000633153 Jy ! Total flux subtracted in 200 components = -0.000633153 Jy ! Clean residual min=-0.021358 max=0.023456 Jy/beam ! Clean residual mean=-0.000026 rms=0.005819 Jy/beam ! Combined flux in latest and established models = 0.320558 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 64 components and 0.320558 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.562565Jy sigma=0.000812 ! Fit after self-cal, rms=0.561998Jy sigma=0.000810 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00168679 Jy ! Component: 100 - total flux cleaned = -0.000820211 Jy ! Component: 150 - total flux cleaned = -1.17665e-05 Jy ! Component: 200 - total flux cleaned = 0.000332694 Jy ! Total flux subtracted in 200 components = 0.000332694 Jy ! Clean residual min=-0.021113 max=0.023373 Jy/beam ! Clean residual mean=-0.000018 rms=0.005753 Jy/beam ! Combined flux in latest and established models = 0.32089 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 68 components and 0.32089 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.561429Jy sigma=0.000810 ! Fit after self-cal, rms=0.561591Jy sigma=0.000810 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.561591Jy sigma=0.000810 ! Fit after self-cal, rms=0.554570Jy sigma=0.000808 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.899 mas, bmaj=19.37 mas, bpa=-0.6952 degrees ! Estimated noise=1498.46 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00320654 Jy ! Component: 100 - total flux cleaned = 0.00321138 Jy ! Component: 150 - total flux cleaned = 0.00301028 Jy ! Component: 200 - total flux cleaned = 0.0031791 Jy ! Total flux subtracted in 200 components = 0.0031791 Jy ! Clean residual min=-0.030474 max=0.031943 Jy/beam ! Clean residual mean=-0.000021 rms=0.008959 Jy/beam ! Combined flux in latest and established models = 0.32407 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 70 components and 0.32407 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.554363Jy sigma=0.000809 ! Fit after self-cal, rms=0.554048Jy sigma=0.000808 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000866655 Jy ! Component: 100 - total flux cleaned = 0.000698282 Jy ! Component: 150 - total flux cleaned = 0.000704627 Jy ! Component: 200 - total flux cleaned = 0.000857914 Jy ! Total flux subtracted in 200 components = 0.000857914 Jy ! Clean residual min=-0.030029 max=0.032152 Jy/beam ! Clean residual mean=-0.000014 rms=0.009035 Jy/beam ! Combined flux in latest and established models = 0.324927 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 70 components and 0.324927 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.553873Jy sigma=0.000811 ! Fit after self-cal, rms=0.553681Jy sigma=0.000810 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.944 mas, bmaj=8.316 mas, bpa=-12.02 degrees ! Estimated noise=1327.41 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.944 x 8.316 at -12.02 degrees (North through East) ! Clean map min=-0.020768 max=0.12655 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.46 mas, bmaj=6.812 mas, bpa=-11.36 degrees ! Estimated noise=2428.67 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.129938 Jy ! Component: 100 - total flux cleaned = 0.199513 Jy ! Component: 150 - total flux cleaned = 0.243539 Jy ! Component: 200 - total flux cleaned = 0.271886 Jy ! Total flux subtracted in 200 components = 0.271886 Jy ! Clean residual min=-0.022388 max=0.025753 Jy/beam ! Clean residual mean=-0.000182 rms=0.006127 Jy/beam ! Combined flux in latest and established models = 0.271886 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.271886 Jy ! Inverting map and beam ! Estimated beam: bmin=2.944 mas, bmaj=8.316 mas, bpa=-12.02 degrees ! Estimated noise=1327.41 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0251657 Jy ! Component: 100 - total flux cleaned = 0.0382537 Jy ! Component: 150 - total flux cleaned = 0.0409413 Jy ! Component: 200 - total flux cleaned = 0.0425157 Jy ! Total flux subtracted in 200 components = 0.0425157 Jy ! Clean residual min=-0.022208 max=0.022351 Jy/beam ! Clean residual mean=-0.000049 rms=0.006013 Jy/beam ! Combined flux in latest and established models = 0.314401 Jy ! Adding 9 model components to the UV plane model. ! The established model now contains 31 components and 0.314401 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.899 mas, bmaj=19.37 mas, bpa=-0.6952 degrees ! Estimated noise=1498.46 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0103422 Jy ! Component: 100 - total flux cleaned = 0.0103261 Jy ! Component: 150 - total flux cleaned = 0.010688 Jy ! Component: 200 - total flux cleaned = 0.0110077 Jy ! Total flux subtracted in 200 components = 0.0110077 Jy ! Clean residual min=-0.029799 max=0.031727 Jy/beam ! Clean residual mean=-0.000010 rms=0.009070 Jy/beam ! Combined flux in latest and established models = 0.325409 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000151703 Jy ! Component: 100 - total flux cleaned = 0.000444401 Jy ! Component: 150 - total flux cleaned = 0.000584137 Jy ! Component: 200 - total flux cleaned = 0.000716635 Jy ! Total flux subtracted in 200 components = 0.000716635 Jy ! Clean residual min=-0.029516 max=0.031725 Jy/beam ! Clean residual mean=-0.000003 rms=0.009059 Jy/beam ! Combined flux in latest and established models = 0.326126 Jy ! Adding 5 model components to the UV plane model. ! The established model now contains 34 components and 0.326126 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.944 mas, bmaj=8.316 mas, bpa=-12.02 degrees ! Estimated noise=1327.41 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00699628 Jy ! Component: 100 - total flux cleaned = -0.00673393 Jy ! Component: 150 - total flux cleaned = -0.0067494 Jy ! Component: 200 - total flux cleaned = -0.00692597 Jy ! Total flux subtracted in 200 components = -0.00692597 Jy ! Clean residual min=-0.021800 max=0.022538 Jy/beam ! Clean residual mean=-0.000028 rms=0.005866 Jy/beam ! Combined flux in latest and established models = 0.3192 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 46 components and 0.3192 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.553454Jy sigma=0.000810 ! Fit after self-cal, rms=0.553927Jy sigma=0.000809 wmodel J1112-2158_S_2017_01_21_pus_map.mod ! Writing 46 model components to file: J1112-2158_S_2017_01_21_pus_map.mod wobs J1112-2158_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J1112-2158_S_2017_01_21_pus_uvs.fits wwins J1112-2158_S_2017_01_21_pus_map.win ! wwins: Wrote 1 windows to J1112-2158_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00288224 Jy ! Component: 100 - total flux cleaned = 0.00545308 Jy ! Component: 150 - total flux cleaned = 0.00927852 Jy ! Component: 200 - total flux cleaned = 0.0115995 Jy ! Component: 250 - total flux cleaned = 0.0138234 Jy ! Component: 300 - total flux cleaned = 0.0168739 Jy ! Component: 350 - total flux cleaned = 0.0183489 Jy ! Component: 400 - total flux cleaned = 0.0195003 Jy ! Component: 450 - total flux cleaned = 0.0209003 Jy ! Component: 500 - total flux cleaned = 0.021717 Jy ! Component: 550 - total flux cleaned = 0.0219832 Jy ! Component: 600 - total flux cleaned = 0.0225075 Jy ! Component: 650 - total flux cleaned = 0.0227664 Jy ! Component: 700 - total flux cleaned = 0.024021 Jy ! Component: 750 - total flux cleaned = 0.0242644 Jy ! Component: 800 - total flux cleaned = 0.0254724 Jy ! Component: 850 - total flux cleaned = 0.0264201 Jy ! Component: 900 - total flux cleaned = 0.0273564 Jy ! Component: 950 - total flux cleaned = 0.0287379 Jy ! Component: 1000 - total flux cleaned = 0.0300907 Jy ! Component: 1050 - total flux cleaned = 0.0316444 Jy ! Component: 1100 - total flux cleaned = 0.0327338 Jy ! Component: 1150 - total flux cleaned = 0.0340228 Jy ! Component: 1200 - total flux cleaned = 0.0352879 Jy ! Component: 1250 - total flux cleaned = 0.0363271 Jy ! Component: 1300 - total flux cleaned = 0.0375532 Jy ! Component: 1350 - total flux cleaned = 0.038764 Jy ! Component: 1400 - total flux cleaned = 0.0401565 Jy ! Component: 1450 - total flux cleaned = 0.0411337 Jy ! Component: 1500 - total flux cleaned = 0.0422903 Jy ! Component: 1550 - total flux cleaned = 0.0434308 Jy ! Component: 1600 - total flux cleaned = 0.04418 Jy ! Component: 1650 - total flux cleaned = 0.0451043 Jy ! Component: 1700 - total flux cleaned = 0.0458339 Jy ! Component: 1750 - total flux cleaned = 0.0467331 Jy ! Component: 1800 - total flux cleaned = 0.0472655 Jy ! Component: 1850 - total flux cleaned = 0.0481388 Jy ! Component: 1900 - total flux cleaned = 0.0484832 Jy ! Component: 1950 - total flux cleaned = 0.0493372 Jy ! Component: 2000 - total flux cleaned = 0.0500114 Jy ! Component: 2050 - total flux cleaned = 0.0500128 Jy ! Component: 2100 - total flux cleaned = 0.050672 Jy ! Component: 2150 - total flux cleaned = 0.0511587 Jy ! Component: 2200 - total flux cleaned = 0.0514792 Jy ! Component: 2250 - total flux cleaned = 0.0519532 Jy ! Component: 2300 - total flux cleaned = 0.0519533 Jy ! Component: 2350 - total flux cleaned = 0.0524211 Jy ! Component: 2400 - total flux cleaned = 0.0528818 Jy ! Component: 2450 - total flux cleaned = 0.0530341 Jy ! Component: 2500 - total flux cleaned = 0.0533354 Jy ! Component: 2550 - total flux cleaned = 0.0539317 Jy ! Component: 2600 - total flux cleaned = 0.0539302 Jy ! Component: 2650 - total flux cleaned = 0.0537849 Jy ! Component: 2700 - total flux cleaned = 0.0546528 Jy ! Component: 2750 - total flux cleaned = 0.0549394 Jy ! Component: 2800 - total flux cleaned = 0.0555071 Jy ! Component: 2850 - total flux cleaned = 0.0559281 Jy ! Component: 2900 - total flux cleaned = 0.0563457 Jy ! Component: 2950 - total flux cleaned = 0.0571747 Jy ! Component: 3000 - total flux cleaned = 0.0573111 Jy ! Component: 3050 - total flux cleaned = 0.0577184 Jy ! Component: 3100 - total flux cleaned = 0.0579886 Jy ! Component: 3150 - total flux cleaned = 0.057989 Jy ! Component: 3200 - total flux cleaned = 0.0582542 Jy ! Component: 3250 - total flux cleaned = 0.0587792 Jy ! Component: 3300 - total flux cleaned = 0.058648 Jy ! Component: 3350 - total flux cleaned = 0.0583891 Jy ! Component: 3400 - total flux cleaned = 0.0586451 Jy ! Component: 3450 - total flux cleaned = 0.0587723 Jy ! Component: 3500 - total flux cleaned = 0.0587706 Jy ! Component: 3550 - total flux cleaned = 0.0583938 Jy ! Component: 3600 - total flux cleaned = 0.0585185 Jy ! Component: 3650 - total flux cleaned = 0.058766 Jy ! Component: 3700 - total flux cleaned = 0.0585182 Jy ! Component: 3750 - total flux cleaned = 0.0582734 Jy ! Component: 3800 - total flux cleaned = 0.0583944 Jy ! Component: 3850 - total flux cleaned = 0.058151 Jy ! Component: 3900 - total flux cleaned = 0.0577885 Jy ! Component: 3950 - total flux cleaned = 0.0577884 Jy ! Component: 4000 - total flux cleaned = 0.0576697 Jy ! Component: 4050 - total flux cleaned = 0.0576696 Jy ! Total flux subtracted in 4096 components = 0.0574332 Jy ! Clean residual min=-0.006306 max=0.005872 Jy/beam ! Clean residual mean=-0.000031 rms=0.002374 Jy/beam ! Combined flux in latest and established models = 0.376633 Jy keep ! Adding 337 model components to the UV plane model. ! The established model now contains 383 components and 0.376633 Jy ![Exited script file: muppet] wmap "J1112-2158_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.944 x 8.316 at -12.02 degrees (North through East) ! Clean map min=-0.015872 max=0.12366 Jy/beam ! Writing clean map to FITS file: J1112-2158_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.123656 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00233887 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -5.6743 5.6743 11.3486 22.6972 45.3944 90.7889 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.123 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.944 x 8.316 at -12.02 degrees (North through East) ! Clean map min=-0.015872 max=0.12366 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1112-2158_S_2017_01_21_pus_uvs.log closed on Sun May 5 15:53:20 2019