! Started logfile: J1112+3503_S_2017_02_24_pus_uvs.log on Sat May 4 11:25:43 2019 obs J1112+3503_S_2017_02_24_pus_uva.fits ! Reading UV FITS file: J1112+3503_S_2017_02_24_pus_uva.fits ! AN table 1: 142 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.84867 visibilities/baseline/integration-bin. ! Found source: J1112+3503 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 823 lines of history. ! ! Reading 21692 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1112+3503_S_2017_02_24_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 116 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 116 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 116 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 543 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.930515Jy sigma=0.009098 ! Fit after self-cal, rms=0.924744Jy sigma=0.009045 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.274 mas, bmaj=5.331 mas, bpa=-3.052 degrees ! Estimated noise=932.271 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.060892 Jy ! Component: 100 - total flux cleaned = 0.0741907 Jy ! Total flux subtracted in 100 components = 0.0741907 Jy ! Clean residual min=-0.002582 max=0.003821 Jy/beam ! Clean residual mean=-0.000001 rms=0.000701 Jy/beam ! Combined flux in latest and established models = 0.0741907 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.0741907 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071291Jy sigma=0.000663 ! Fit after self-cal, rms=0.071284Jy sigma=0.000663 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.859 mas, bmaj=6.132 mas, bpa=-1.167 degrees ! Estimated noise=535.585 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00328686 Jy ! Component: 100 - total flux cleaned = 0.00461183 Jy ! Component: 150 - total flux cleaned = 0.00525145 Jy ! Component: 200 - total flux cleaned = 0.00536666 Jy ! Total flux subtracted in 200 components = 0.00536666 Jy ! Clean residual min=-0.001550 max=0.001580 Jy/beam ! Clean residual mean=-0.000004 rms=0.000409 Jy/beam ! Combined flux in latest and established models = 0.0795574 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 16 components and 0.0795574 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071136Jy sigma=0.000662 ! Fit after self-cal, rms=0.071136Jy sigma=0.000662 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.03 HN 1.01 KP 0.99 ! LA 0.99 MK 0.96 NL 1.01 OV 1.05 ! PT 0.99 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.95 HN 1.04 KP 0.94 ! LA 0.95 MK 0.96 NL 1.00 OV 1.03 ! PT 0.99 SC 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.00 HN 1.00 KP 1.04 ! LA 1.02 MK 1.01 NL 1.13 OV 1.00 ! PT 0.99 SC 1.01 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.00 HN 0.94 KP 1.00* ! LA 0.97 MK 1.12 NL 1.00* OV 0.96 ! PT 1.05 SC 1.00* ! ! ! Fit before self-cal, rms=0.071136Jy sigma=0.000662 ! Fit after self-cal, rms=0.070762Jy sigma=0.000660 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.844 mas, bmaj=6.115 mas, bpa=-0.7382 degrees ! Estimated noise=535.753 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000503871 Jy ! Component: 100 - total flux cleaned = 0.000667529 Jy ! Component: 150 - total flux cleaned = 0.000683603 Jy ! Component: 200 - total flux cleaned = 0.000698561 Jy ! Total flux subtracted in 200 components = 0.000698561 Jy ! Clean residual min=-0.001487 max=0.001531 Jy/beam ! Clean residual mean=-0.000002 rms=0.000385 Jy/beam ! Combined flux in latest and established models = 0.080256 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 21 components and 0.080256 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070757Jy sigma=0.000660 ! Fit after self-cal, rms=0.070756Jy sigma=0.000660 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070756Jy sigma=0.000660 ! Fit after self-cal, rms=0.070505Jy sigma=0.000659 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.843 mas, bmaj=6.117 mas, bpa=-0.3814 degrees ! Estimated noise=536.261 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000105429 Jy ! Component: 100 - total flux cleaned = 0.000106288 Jy ! Component: 150 - total flux cleaned = 8.68899e-05 Jy ! Component: 200 - total flux cleaned = 7.55708e-05 Jy ! Total flux subtracted in 200 components = 7.55708e-05 Jy ! Clean residual min=-0.001297 max=0.001379 Jy/beam ! Clean residual mean=-0.000001 rms=0.000321 Jy/beam ! Combined flux in latest and established models = 0.0803315 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 28 components and 0.0803315 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070503Jy sigma=0.000659 ! Fit after self-cal, rms=0.070508Jy sigma=0.000659 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-89, -115). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000746563 Jy ! Component: 100 - total flux cleaned = 0.000804967 Jy ! Component: 150 - total flux cleaned = 0.000829687 Jy ! Component: 200 - total flux cleaned = 0.00080767 Jy ! Total flux subtracted in 200 components = 0.00080767 Jy ! Clean residual min=-0.001209 max=0.001268 Jy/beam ! Clean residual mean=-0.000002 rms=0.000308 Jy/beam ! Combined flux in latest and established models = 0.0811392 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 48 components and 0.0811392 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070481Jy sigma=0.000659 ! Fit after self-cal, rms=0.070481Jy sigma=0.000659 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070481Jy sigma=0.000659 ! Fit after self-cal, rms=0.070523Jy sigma=0.000659 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.84 mas, bmaj=6.116 mas, bpa=-0.2104 degrees ! Estimated noise=536.564 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000372868 Jy ! Component: 100 - total flux cleaned = 0.000373468 Jy ! Component: 150 - total flux cleaned = 0.000356926 Jy ! Component: 200 - total flux cleaned = 0.00035767 Jy ! Total flux subtracted in 200 components = 0.00035767 Jy ! Clean residual min=-0.001195 max=0.001238 Jy/beam ! Clean residual mean=-0.000001 rms=0.000301 Jy/beam ! Combined flux in latest and established models = 0.0814969 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 52 components and 0.0814969 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070513Jy sigma=0.000658 ! Fit after self-cal, rms=0.070512Jy sigma=0.000658 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.61788e-05 Jy ! Component: 100 - total flux cleaned = 7.57087e-05 Jy ! Component: 150 - total flux cleaned = 8.91321e-05 Jy ! Component: 200 - total flux cleaned = 0.000101813 Jy ! Total flux subtracted in 200 components = 0.000101813 Jy ! Clean residual min=-0.001193 max=0.001235 Jy/beam ! Clean residual mean=-0.000001 rms=0.000300 Jy/beam ! Combined flux in latest and established models = 0.0815987 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 60 components and 0.0815987 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070507Jy sigma=0.000658 ! Fit after self-cal, rms=0.070507Jy sigma=0.000658 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070507Jy sigma=0.000658 ! Fit after self-cal, rms=0.070495Jy sigma=0.000658 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.407 mas, bmaj=9.344 mas, bpa=3.145 degrees ! Estimated noise=653.554 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000309985 Jy ! Component: 100 - total flux cleaned = 0.000358419 Jy ! Component: 150 - total flux cleaned = 0.000365632 Jy ! Component: 200 - total flux cleaned = 0.000378854 Jy ! Total flux subtracted in 200 components = 0.000378854 Jy ! Clean residual min=-0.001445 max=0.001247 Jy/beam ! Clean residual mean=-0.000003 rms=0.000367 Jy/beam ! Combined flux in latest and established models = 0.0819775 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 72 components and 0.0819775 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070495Jy sigma=0.000658 ! Fit after self-cal, rms=0.070494Jy sigma=0.000658 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.67285e-05 Jy ! Component: 100 - total flux cleaned = 0.000105765 Jy ! Component: 150 - total flux cleaned = 0.000122987 Jy ! Component: 200 - total flux cleaned = 0.000133399 Jy ! Total flux subtracted in 200 components = 0.000133399 Jy ! Clean residual min=-0.001453 max=0.001247 Jy/beam ! Clean residual mean=-0.000003 rms=0.000366 Jy/beam ! Combined flux in latest and established models = 0.0821109 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 77 components and 0.0821109 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070494Jy sigma=0.000658 ! Fit after self-cal, rms=0.070494Jy sigma=0.000658 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.839 mas, bmaj=6.115 mas, bpa=-0.1382 degrees ! Estimated noise=536.496 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.839 x 6.115 at -0.1382 degrees (North through East) ! Clean map min=-0.0011889 max=0.077358 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.263 mas, bmaj=5.308 mas, bpa=-1.85 degrees ! Estimated noise=930.347 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0607459 Jy ! Component: 100 - total flux cleaned = 0.0740665 Jy ! Component: 150 - total flux cleaned = 0.0775174 Jy ! Component: 200 - total flux cleaned = 0.0791281 Jy ! Total flux subtracted in 200 components = 0.0791281 Jy ! Clean residual min=-0.001994 max=0.001972 Jy/beam ! Clean residual mean=0.000000 rms=0.000500 Jy/beam ! Combined flux in latest and established models = 0.0791281 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.0791281 Jy ! Inverting map and beam ! Estimated beam: bmin=3.839 mas, bmaj=6.115 mas, bpa=-0.1382 degrees ! Estimated noise=536.496 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000964492 Jy ! Component: 100 - total flux cleaned = 0.00130774 Jy ! Component: 150 - total flux cleaned = 0.00149698 Jy ! Component: 200 - total flux cleaned = 0.00160997 Jy ! Total flux subtracted in 200 components = 0.00160997 Jy ! Clean residual min=-0.001285 max=0.001285 Jy/beam ! Clean residual mean=-0.000002 rms=0.000308 Jy/beam ! Combined flux in latest and established models = 0.0807381 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 42 components and 0.0807381 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.407 mas, bmaj=9.344 mas, bpa=3.145 degrees ! Estimated noise=653.554 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000599821 Jy ! Component: 100 - total flux cleaned = 0.000818323 Jy ! Component: 150 - total flux cleaned = 0.000968391 Jy ! Component: 200 - total flux cleaned = 0.00108505 Jy ! Total flux subtracted in 200 components = 0.00108505 Jy ! Clean residual min=-0.001476 max=0.001248 Jy/beam ! Clean residual mean=-0.000004 rms=0.000365 Jy/beam ! Combined flux in latest and established models = 0.0818231 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.39005e-05 Jy ! Component: 100 - total flux cleaned = 9.41637e-05 Jy ! Component: 150 - total flux cleaned = 0.000144758 Jy ! Component: 200 - total flux cleaned = 0.000177272 Jy ! Total flux subtracted in 200 components = 0.000177272 Jy ! Clean residual min=-0.001474 max=0.001241 Jy/beam ! Clean residual mean=-0.000004 rms=0.000365 Jy/beam ! Combined flux in latest and established models = 0.0820004 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 68 components and 0.0820004 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.839 mas, bmaj=6.115 mas, bpa=-0.1382 degrees ! Estimated noise=536.496 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000113885 Jy ! Component: 100 - total flux cleaned = -9.36467e-05 Jy ! Component: 150 - total flux cleaned = -9.37342e-05 Jy ! Component: 200 - total flux cleaned = -6.26664e-05 Jy ! Total flux subtracted in 200 components = -6.26664e-05 Jy ! Clean residual min=-0.001206 max=0.001272 Jy/beam ! Clean residual mean=-0.000001 rms=0.000300 Jy/beam ! Combined flux in latest and established models = 0.0819377 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 82 components and 0.0819377 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070505Jy sigma=0.000658 ! Fit after self-cal, rms=0.070502Jy sigma=0.000658 wmodel J1112+3503_S_2017_02_24_pus_map.mod ! Writing 82 model components to file: J1112+3503_S_2017_02_24_pus_map.mod wobs J1112+3503_S_2017_02_24_pus_uvs.fits ! Writing UV FITS file: J1112+3503_S_2017_02_24_pus_uvs.fits wwins J1112+3503_S_2017_02_24_pus_map.win ! wwins: Wrote 2 windows to J1112+3503_S_2017_02_24_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 7.0197e-05 Jy ! Component: 100 - total flux cleaned = 9.06527e-05 Jy ! Component: 150 - total flux cleaned = 0.000130272 Jy ! Component: 200 - total flux cleaned = 0.000187334 Jy ! Component: 250 - total flux cleaned = 0.000168946 Jy ! Component: 300 - total flux cleaned = 0.000168751 Jy ! Component: 350 - total flux cleaned = 0.000133915 Jy ! Component: 400 - total flux cleaned = 0.000201579 Jy ! Component: 450 - total flux cleaned = 0.000168081 Jy ! Component: 500 - total flux cleaned = 0.000151688 Jy ! Component: 550 - total flux cleaned = 0.000183583 Jy ! Component: 600 - total flux cleaned = 0.000198993 Jy ! Component: 650 - total flux cleaned = 0.00021417 Jy ! Component: 700 - total flux cleaned = 0.000183573 Jy ! Component: 750 - total flux cleaned = 0.00024364 Jy ! Component: 800 - total flux cleaned = 0.000243514 Jy ! Component: 850 - total flux cleaned = 0.000243473 Jy ! Component: 900 - total flux cleaned = 0.000272158 Jy ! Component: 950 - total flux cleaned = 0.00028619 Jy ! Component: 1000 - total flux cleaned = 0.000300154 Jy ! Component: 1050 - total flux cleaned = 0.000341402 Jy ! Component: 1100 - total flux cleaned = 0.000327565 Jy ! Component: 1150 - total flux cleaned = 0.000341118 Jy ! Component: 1200 - total flux cleaned = 0.000341059 Jy ! Component: 1250 - total flux cleaned = 0.000393939 Jy ! Component: 1300 - total flux cleaned = 0.000406929 Jy ! Component: 1350 - total flux cleaned = 0.000355169 Jy ! Component: 1400 - total flux cleaned = 0.000393851 Jy ! Component: 1450 - total flux cleaned = 0.000406569 Jy ! Component: 1500 - total flux cleaned = 0.000431741 Jy ! Component: 1550 - total flux cleaned = 0.000456568 Jy ! Component: 1600 - total flux cleaned = 0.00041959 Jy ! Component: 1650 - total flux cleaned = 0.000468477 Jy ! Component: 1700 - total flux cleaned = 0.000456446 Jy ! Component: 1750 - total flux cleaned = 0.000408714 Jy ! Component: 1800 - total flux cleaned = 0.000420819 Jy ! Component: 1850 - total flux cleaned = 0.000420949 Jy ! Component: 1900 - total flux cleaned = 0.000444449 Jy ! Component: 1950 - total flux cleaned = 0.000479293 Jy ! Component: 2000 - total flux cleaned = 0.000467806 Jy ! Component: 2050 - total flux cleaned = 0.000479238 Jy ! Component: 2100 - total flux cleaned = 0.000433884 Jy ! Component: 2150 - total flux cleaned = 0.000478845 Jy ! Component: 2200 - total flux cleaned = 0.000445458 Jy ! Component: 2250 - total flux cleaned = 0.000456403 Jy ! Component: 2300 - total flux cleaned = 0.000445373 Jy ! Component: 2350 - total flux cleaned = 0.000445341 Jy ! Component: 2400 - total flux cleaned = 0.000423631 Jy ! Component: 2450 - total flux cleaned = 0.000359255 Jy ! Component: 2500 - total flux cleaned = 0.000380555 Jy ! Component: 2550 - total flux cleaned = 0.000327724 Jy ! Component: 2600 - total flux cleaned = 0.000285787 Jy ! Component: 2650 - total flux cleaned = 0.000296128 Jy ! Component: 2700 - total flux cleaned = 0.00028566 Jy ! Component: 2750 - total flux cleaned = 0.00022397 Jy ! Component: 2800 - total flux cleaned = 0.000254528 Jy ! Component: 2850 - total flux cleaned = 0.000153161 Jy ! Component: 2900 - total flux cleaned = 0.000193493 Jy ! Component: 2950 - total flux cleaned = 0.000123486 Jy ! Component: 3000 - total flux cleaned = 9.37552e-05 Jy ! Component: 3050 - total flux cleaned = 7.39268e-05 Jy ! Component: 3100 - total flux cleaned = 6.41185e-05 Jy ! Component: 3150 - total flux cleaned = 1.54377e-05 Jy ! Component: 3200 - total flux cleaned = 5.71346e-06 Jy ! Component: 3250 - total flux cleaned = -2.31633e-05 Jy ! Component: 3300 - total flux cleaned = -7.09475e-05 Jy ! Component: 3350 - total flux cleaned = -8.99279e-05 Jy ! Component: 3400 - total flux cleaned = -0.000108872 Jy ! Component: 3450 - total flux cleaned = -0.000146386 Jy ! Component: 3500 - total flux cleaned = -0.000155712 Jy ! Component: 3550 - total flux cleaned = -0.000164955 Jy ! Component: 3600 - total flux cleaned = -0.000201828 Jy ! Component: 3650 - total flux cleaned = -0.000192749 Jy ! Component: 3700 - total flux cleaned = -0.00024742 Jy ! Component: 3750 - total flux cleaned = -0.000274549 Jy ! Component: 3800 - total flux cleaned = -0.000319609 Jy ! Component: 3850 - total flux cleaned = -0.000346425 Jy ! Component: 3900 - total flux cleaned = -0.000355341 Jy ! Component: 3950 - total flux cleaned = -0.000346435 Jy ! Component: 4000 - total flux cleaned = -0.000337673 Jy ! Component: 4050 - total flux cleaned = -0.00035519 Jy ! Total flux subtracted in 4096 components = -0.00039878 Jy ! Clean residual min=-0.000511 max=0.000472 Jy/beam ! Clean residual mean=-0.000001 rms=0.000160 Jy/beam ! Combined flux in latest and established models = 0.081539 Jy keep ! Adding 298 model components to the UV plane model. ! The established model now contains 380 components and 0.0815389 Jy ![Exited script file: muppet] wmap "J1112+3503_S_2017_02_24_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.839 x 6.115 at -0.1382 degrees (North through East) ! Clean map min=-0.00099554 max=0.077444 Jy/beam ! Writing clean map to FITS file: J1112+3503_S_2017_02_24_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0774436 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000159083 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.616252 0.616252 1.2325 2.46501 4.93002 9.86004 19.7201 39.4402 78.8803 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.077 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.839 x 6.115 at -0.1382 degrees (North through East) ! Clean map min=-0.00099554 max=0.077444 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1112+3503_S_2017_02_24_pus_uvs.log closed on Sat May 4 11:25:48 2019