! Started logfile: J1110-1858_S_2017_05_01_pus_uvs.log on Wed May 1 18:34:10 2019 obs J1110-1858_S_2017_05_01_pus_uva.fits ! Reading UV FITS file: J1110-1858_S_2017_05_01_pus_uva.fits ! AN table 1: 95 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.979649 visibilities/baseline/integration-bin. ! Found source: J1110-1858 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 788 lines of history. ! ! Reading 16752 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1110-1858_S_2017_05_01_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 424 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.626683Jy sigma=0.040874 ! Fit after self-cal, rms=0.593275Jy sigma=0.040820 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.601 mas, bmaj=7.788 mas, bpa=-14.88 degrees ! Estimated noise=647.295 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.143236 Jy ! Component: 100 - total flux cleaned = 0.20315 Jy ! Total flux subtracted in 100 components = 0.20315 Jy ! Clean residual min=-0.067268 max=0.086930 Jy/beam ! Clean residual mean=0.000048 rms=0.020391 Jy/beam ! Combined flux in latest and established models = 0.20315 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.20315 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.361293Jy sigma=0.006779 ! Fit after self-cal, rms=0.360145Jy sigma=0.006777 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.227 mas, bmaj=8.153 mas, bpa=-17.14 degrees ! Estimated noise=459.701 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0673928 Jy ! Component: 100 - total flux cleaned = 0.0837654 Jy ! Component: 150 - total flux cleaned = 0.0836931 Jy ! Component: 200 - total flux cleaned = 0.0824867 Jy ! Total flux subtracted in 200 components = 0.0824867 Jy ! Clean residual min=-0.072787 max=0.100455 Jy/beam ! Clean residual mean=0.000590 rms=0.024196 Jy/beam ! Combined flux in latest and established models = 0.285637 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 17 components and 0.285637 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.301243Jy sigma=0.009343 ! Fit after self-cal, rms=0.300955Jy sigma=0.009342 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.71 FD 0.62 HN 0.96 KP 0.65 ! LA 0.64 MK 0.68 NL 0.62 OV 0.78 ! PT 0.65 SC 1.14 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.76 FD 0.65 HN 1.03 KP 0.63 ! LA 0.62 MK 21.64 NL 0.68 OV 0.81 ! PT 0.63 SC 1.23 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.74 FD 0.68 HN 1.00 KP 0.65 ! LA 0.63 MK 0.69 NL 0.70 OV 0.74 ! PT 0.63 SC 1.21 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.84 FD 0.73 HN 1.04 KP 1.00* ! LA 32.66 MK 0.58 NL 1.00* OV 1.00* ! PT 0.69 SC 1.00* ! ! ! Fit before self-cal, rms=0.300955Jy sigma=0.009342 ! Fit after self-cal, rms=1.260991Jy sigma=0.001027 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.865 mas, bmaj=9.026 mas, bpa=-4.114 degrees ! Estimated noise=528.196 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (8, -14.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.01604 Jy ! Component: 100 - total flux cleaned = 0.0178909 Jy ! Component: 150 - total flux cleaned = 0.0179558 Jy ! Component: 200 - total flux cleaned = 0.0179833 Jy ! Total flux subtracted in 200 components = 0.0179833 Jy ! Clean residual min=-0.011103 max=0.011509 Jy/beam ! Clean residual mean=-0.000007 rms=0.002753 Jy/beam ! Combined flux in latest and established models = 0.30362 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 36 components and 0.30362 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.253680Jy sigma=0.000962 ! Fit after self-cal, rms=1.253597Jy sigma=0.000935 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.253597Jy sigma=0.000935 ! Fit after self-cal, rms=1.269832Jy sigma=0.000762 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.747 mas, bmaj=9.015 mas, bpa=-5.095 degrees ! Estimated noise=515.677 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00743231 Jy ! Component: 100 - total flux cleaned = 0.00745888 Jy ! Component: 150 - total flux cleaned = 0.00771297 Jy ! Component: 200 - total flux cleaned = 0.00817206 Jy ! Total flux subtracted in 200 components = 0.00817206 Jy ! Clean residual min=-0.005464 max=0.006831 Jy/beam ! Clean residual mean=-0.000005 rms=0.001469 Jy/beam ! Combined flux in latest and established models = 0.311792 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 53 components and 0.311792 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.268231Jy sigma=0.000736 ! Fit after self-cal, rms=1.268208Jy sigma=0.000734 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.5, -16). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00274709 Jy ! Component: 100 - total flux cleaned = 0.00275434 Jy ! Component: 150 - total flux cleaned = 0.00276367 Jy ! Component: 200 - total flux cleaned = 0.00276993 Jy ! Total flux subtracted in 200 components = 0.00276993 Jy ! Clean residual min=-0.005006 max=0.005685 Jy/beam ! Clean residual mean=-0.000001 rms=0.001307 Jy/beam ! Combined flux in latest and established models = 0.314562 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 63 components and 0.314562 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.267283Jy sigma=0.000724 ! Fit after self-cal, rms=1.267278Jy sigma=0.000724 ! Inverting map ! Added new window around map position (66, 31.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00356454 Jy ! Component: 100 - total flux cleaned = 0.00339414 Jy ! Component: 150 - total flux cleaned = 0.00307919 Jy ! Component: 200 - total flux cleaned = 0.00293266 Jy ! Total flux subtracted in 200 components = 0.00293266 Jy ! Clean residual min=-0.004657 max=0.004755 Jy/beam ! Clean residual mean=-0.000004 rms=0.001195 Jy/beam ! Combined flux in latest and established models = 0.317495 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 73 components and 0.317495 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.266563Jy sigma=0.000718 ! Fit after self-cal, rms=1.266561Jy sigma=0.000718 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.266561Jy sigma=0.000718 ! Fit after self-cal, rms=1.489065Jy sigma=0.000712 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.751 mas, bmaj=9.142 mas, bpa=-4.268 degrees ! Estimated noise=516.612 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00174556 Jy ! Component: 100 - total flux cleaned = 0.00211654 Jy ! Component: 150 - total flux cleaned = 0.00228877 Jy ! Component: 200 - total flux cleaned = 0.00245281 Jy ! Total flux subtracted in 200 components = 0.00245281 Jy ! Clean residual min=-0.003637 max=0.004537 Jy/beam ! Clean residual mean=-0.000008 rms=0.001003 Jy/beam ! Combined flux in latest and established models = 0.319947 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 85 components and 0.319947 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.487947Jy sigma=0.000706 ! Fit after self-cal, rms=1.487943Jy sigma=0.000705 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-13, -6.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0028826 Jy ! Component: 100 - total flux cleaned = 0.00287928 Jy ! Component: 150 - total flux cleaned = 0.00287568 Jy ! Component: 200 - total flux cleaned = 0.00299755 Jy ! Total flux subtracted in 200 components = 0.00299755 Jy ! Clean residual min=-0.003452 max=0.003928 Jy/beam ! Clean residual mean=-0.000006 rms=0.000910 Jy/beam ! Combined flux in latest and established models = 0.322945 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 106 components and 0.322945 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.487251Jy sigma=0.000702 ! Fit after self-cal, rms=1.487249Jy sigma=0.000702 ! Inverting map ! Added new window around map position (1, 14.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000853905 Jy ! Component: 100 - total flux cleaned = 0.00085247 Jy ! Component: 150 - total flux cleaned = 0.000970586 Jy ! Component: 200 - total flux cleaned = 0.000971531 Jy ! Total flux subtracted in 200 components = 0.000971531 Jy ! Clean residual min=-0.003189 max=0.003459 Jy/beam ! Clean residual mean=-0.000004 rms=0.000829 Jy/beam ! Combined flux in latest and established models = 0.323917 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 118 components and 0.323917 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.486885Jy sigma=0.000698 ! Fit after self-cal, rms=1.486886Jy sigma=0.000698 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.486886Jy sigma=0.000698 ! Fit after self-cal, rms=1.681725Jy sigma=0.000696 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.339 mas, bmaj=16.84 mas, bpa=0.992 degrees ! Estimated noise=555.411 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000622915 Jy ! Component: 100 - total flux cleaned = 0.000241392 Jy ! Component: 150 - total flux cleaned = 0.000108659 Jy ! Component: 200 - total flux cleaned = -1.35865e-05 Jy ! Total flux subtracted in 200 components = -1.35865e-05 Jy ! Clean residual min=-0.002563 max=0.002890 Jy/beam ! Clean residual mean=-0.000013 rms=0.000686 Jy/beam ! Combined flux in latest and established models = 0.323903 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 132 components and 0.323903 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.681636Jy sigma=0.000694 ! Fit after self-cal, rms=1.681635Jy sigma=0.000694 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000297327 Jy ! Component: 100 - total flux cleaned = -0.000350417 Jy ! Component: 150 - total flux cleaned = -0.000399503 Jy ! Component: 200 - total flux cleaned = -0.000492597 Jy ! Total flux subtracted in 200 components = -0.000492597 Jy ! Clean residual min=-0.002558 max=0.002684 Jy/beam ! Clean residual mean=-0.000012 rms=0.000649 Jy/beam ! Combined flux in latest and established models = 0.32341 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 145 components and 0.32341 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.681554Jy sigma=0.000693 ! Fit after self-cal, rms=1.681554Jy sigma=0.000693 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.757 mas, bmaj=9.228 mas, bpa=-3.676 degrees ! Estimated noise=517.868 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.757 x 9.228 at -3.676 degrees (North through East) ! Clean map min=-0.0041806 max=0.2679 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.996 mas, bmaj=7.6 mas, bpa=-3.952 degrees ! Estimated noise=972.405 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.200137 Jy ! Component: 100 - total flux cleaned = 0.256777 Jy ! Component: 150 - total flux cleaned = 0.287305 Jy ! Component: 200 - total flux cleaned = 0.305361 Jy ! Total flux subtracted in 200 components = 0.305361 Jy ! Clean residual min=-0.007482 max=0.009360 Jy/beam ! Clean residual mean=-0.000019 rms=0.002087 Jy/beam ! Combined flux in latest and established models = 0.305361 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.305361 Jy ! Inverting map and beam ! Estimated beam: bmin=3.757 mas, bmaj=9.228 mas, bpa=-3.676 degrees ! Estimated noise=517.868 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0125567 Jy ! Component: 100 - total flux cleaned = 0.0179967 Jy ! Component: 150 - total flux cleaned = 0.0198177 Jy ! Component: 200 - total flux cleaned = 0.0212088 Jy ! Total flux subtracted in 200 components = 0.0212088 Jy ! Clean residual min=-0.003775 max=0.004318 Jy/beam ! Clean residual mean=-0.000006 rms=0.001077 Jy/beam ! Combined flux in latest and established models = 0.32657 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 53 components and 0.32657 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.339 mas, bmaj=16.84 mas, bpa=0.992 degrees ! Estimated noise=555.411 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00078149 Jy ! Component: 100 - total flux cleaned = -0.00194516 Jy ! Component: 150 - total flux cleaned = -0.00231959 Jy ! Component: 200 - total flux cleaned = -0.00231105 Jy ! Total flux subtracted in 200 components = -0.00231105 Jy ! Clean residual min=-0.002855 max=0.002811 Jy/beam ! Clean residual mean=-0.000013 rms=0.000853 Jy/beam ! Combined flux in latest and established models = 0.324259 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.16947e-06 Jy ! Component: 100 - total flux cleaned = 9.7394e-05 Jy ! Component: 150 - total flux cleaned = 1.33807e-05 Jy ! Component: 200 - total flux cleaned = -0.000215683 Jy ! Total flux subtracted in 200 components = -0.000215683 Jy ! Clean residual min=-0.002566 max=0.002570 Jy/beam ! Clean residual mean=-0.000013 rms=0.000772 Jy/beam ! Combined flux in latest and established models = 0.324043 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 101 components and 0.324043 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.757 mas, bmaj=9.228 mas, bpa=-3.676 degrees ! Estimated noise=517.868 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000165881 Jy ! Component: 100 - total flux cleaned = 0.000548021 Jy ! Component: 150 - total flux cleaned = 0.000779419 Jy ! Component: 200 - total flux cleaned = 0.000781291 Jy ! Total flux subtracted in 200 components = 0.000781291 Jy ! Clean residual min=-0.002707 max=0.003687 Jy/beam ! Clean residual mean=-0.000006 rms=0.000814 Jy/beam ! Combined flux in latest and established models = 0.324824 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 127 components and 0.324824 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.677106Jy sigma=0.000702 ! Fit after self-cal, rms=1.677069Jy sigma=0.000701 wmodel J1110-1858_S_2017_05_01_pus_map.mod ! Writing 127 model components to file: J1110-1858_S_2017_05_01_pus_map.mod wobs J1110-1858_S_2017_05_01_pus_uvs.fits ! Writing UV FITS file: J1110-1858_S_2017_05_01_pus_uvs.fits wwins J1110-1858_S_2017_05_01_pus_map.win ! wwins: Wrote 6 windows to J1110-1858_S_2017_05_01_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0016039 Jy ! Component: 100 - total flux cleaned = 0.00256943 Jy ! Component: 150 - total flux cleaned = 0.00320505 Jy ! Component: 200 - total flux cleaned = 0.0038663 Jy ! Component: 250 - total flux cleaned = 0.00445899 Jy ! Component: 300 - total flux cleaned = 0.00513232 Jy ! Component: 350 - total flux cleaned = 0.00569499 Jy ! Component: 400 - total flux cleaned = 0.00615357 Jy ! Component: 450 - total flux cleaned = 0.00655735 Jy ! Component: 500 - total flux cleaned = 0.00699688 Jy ! Component: 550 - total flux cleaned = 0.007342 Jy ! Component: 600 - total flux cleaned = 0.00759636 Jy ! Component: 650 - total flux cleaned = 0.00788799 Jy ! Component: 700 - total flux cleaned = 0.00813462 Jy ! Component: 750 - total flux cleaned = 0.00833695 Jy ! Component: 800 - total flux cleaned = 0.00861609 Jy ! Component: 850 - total flux cleaned = 0.00892928 Jy ! Component: 900 - total flux cleaned = 0.00912207 Jy ! Component: 950 - total flux cleaned = 0.00923597 Jy ! Component: 1000 - total flux cleaned = 0.00934855 Jy ! Component: 1050 - total flux cleaned = 0.00957075 Jy ! Component: 1100 - total flux cleaned = 0.00968104 Jy ! Component: 1150 - total flux cleaned = 0.00978937 Jy ! Component: 1200 - total flux cleaned = 0.00996811 Jy ! Component: 1250 - total flux cleaned = 0.0101443 Jy ! Component: 1300 - total flux cleaned = 0.010214 Jy ! Component: 1350 - total flux cleaned = 0.0103864 Jy ! Component: 1400 - total flux cleaned = 0.0104204 Jy ! Component: 1450 - total flux cleaned = 0.0105219 Jy ! Component: 1500 - total flux cleaned = 0.0105217 Jy ! Component: 1550 - total flux cleaned = 0.0105546 Jy ! Component: 1600 - total flux cleaned = 0.0105878 Jy ! Component: 1650 - total flux cleaned = 0.0105883 Jy ! Component: 1700 - total flux cleaned = 0.0106524 Jy ! Component: 1750 - total flux cleaned = 0.0106844 Jy ! Component: 1800 - total flux cleaned = 0.0108102 Jy ! Component: 1850 - total flux cleaned = 0.0107473 Jy ! Component: 1900 - total flux cleaned = 0.010809 Jy ! Component: 1950 - total flux cleaned = 0.0109007 Jy ! Component: 2000 - total flux cleaned = 0.0108398 Jy ! Component: 2050 - total flux cleaned = 0.01087 Jy ! Component: 2100 - total flux cleaned = 0.0109897 Jy ! Component: 2150 - total flux cleaned = 0.0110196 Jy ! Component: 2200 - total flux cleaned = 0.0109906 Jy ! Component: 2250 - total flux cleaned = 0.0110488 Jy ! Component: 2300 - total flux cleaned = 0.0110203 Jy ! Component: 2350 - total flux cleaned = 0.011049 Jy ! Component: 2400 - total flux cleaned = 0.0110775 Jy ! Component: 2450 - total flux cleaned = 0.010993 Jy ! Component: 2500 - total flux cleaned = 0.011077 Jy ! Component: 2550 - total flux cleaned = 0.0110214 Jy ! Component: 2600 - total flux cleaned = 0.0109939 Jy ! Component: 2650 - total flux cleaned = 0.0109666 Jy ! Component: 2700 - total flux cleaned = 0.0109937 Jy ! Component: 2750 - total flux cleaned = 0.0109129 Jy ! Component: 2800 - total flux cleaned = 0.0109396 Jy ! Component: 2850 - total flux cleaned = 0.0108603 Jy ! Component: 2900 - total flux cleaned = 0.0108866 Jy ! Component: 2950 - total flux cleaned = 0.0108869 Jy ! Component: 3000 - total flux cleaned = 0.0108867 Jy ! Component: 3050 - total flux cleaned = 0.010861 Jy ! Component: 3100 - total flux cleaned = 0.0108098 Jy ! Component: 3150 - total flux cleaned = 0.0108098 Jy ! Component: 3200 - total flux cleaned = 0.0107846 Jy ! Component: 3250 - total flux cleaned = 0.0107847 Jy ! Component: 3300 - total flux cleaned = 0.0107601 Jy ! Component: 3350 - total flux cleaned = 0.0107107 Jy ! Component: 3400 - total flux cleaned = 0.0107349 Jy ! Component: 3450 - total flux cleaned = 0.0106863 Jy ! Component: 3500 - total flux cleaned = 0.0106137 Jy ! Component: 3550 - total flux cleaned = 0.0107099 Jy ! Component: 3600 - total flux cleaned = 0.0106143 Jy ! Component: 3650 - total flux cleaned = 0.0107093 Jy ! Component: 3700 - total flux cleaned = 0.0106855 Jy ! Component: 3750 - total flux cleaned = 0.0106384 Jy ! Component: 3800 - total flux cleaned = 0.0106152 Jy ! Component: 3850 - total flux cleaned = 0.0106151 Jy ! Component: 3900 - total flux cleaned = 0.010523 Jy ! Component: 3950 - total flux cleaned = 0.0106146 Jy ! Component: 4000 - total flux cleaned = 0.0106146 Jy ! Component: 4050 - total flux cleaned = 0.010637 Jy ! Total flux subtracted in 4096 components = 0.0105694 Jy ! Clean residual min=-0.001229 max=0.001635 Jy/beam ! Clean residual mean=-0.000001 rms=0.000405 Jy/beam ! Combined flux in latest and established models = 0.335393 Jy keep ! Adding 216 model components to the UV plane model. ! The established model now contains 343 components and 0.335393 Jy ![Exited script file: muppet] wmap "J1110-1858_S_2017_05_01_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.757 x 9.228 at -3.676 degrees (North through East) ! Clean map min=-0.0034129 max=0.2606 Jy/beam ! Writing clean map to FITS file: J1110-1858_S_2017_05_01_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.260599 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000405267 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.466541 0.466541 0.933081 1.86616 3.73233 7.46465 14.9293 29.8586 59.7172 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.26 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.757 x 9.228 at -3.676 degrees (North through East) ! Clean map min=-0.0034129 max=0.2606 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1110-1858_S_2017_05_01_pus_uvs.log closed on Wed May 1 18:34:15 2019